Web temllates with tabs

Hi Experts,
I am using BI.7,but using web application designer(3.x).
i am having a requrement to design a web template with multiple tabs.
so could any body can say is it possible to create web templates with diffrent tabs by using
web application designer 3.x.
Regards
Debasish

Hi Rahul,
The Document is Good.According to the Document i have created one master template and followed the HTML Coadings.
But i am getting an error,i.e when executing the master template,its opening properly with the two radio buttons(a-sales,b-Market).when select the radio button sales,its not displaying the sales report,similar for market report.
If you have faced such type of issues,please tell me how to resolve it.
Regards
Debasish
Edited by: Debasish Mishra on Jul 20, 2009 9:19 AM

Similar Messages

  • Web Templates with Tabs

    Hi, We have quite a few reports we have developed for users that have around 5 or 6 tabs.  When we adding or remove any functionality we have to maintain each of these reports.   Does anyone else have/had this issue and what is a good strategy to move away from Web Templates with tabs?
    Thanks!

    to my knowldge, we don't have any option... we need to maintain every time.
    I can think how complex it is...if you have 5 or 6 tabs... it 's very complex. Going forward... for small change.. like adding new tab etc... you need to be very careful.
    On every call... try to reset to initial every time you call a tab... then try to pass values as per the requirement. ex: Title, Filters, settings, table etc.
    Initial view we will disble every thing... we will one by one... with multiple commands...
    Nagesh Ganisetti.

  • Web query with tabs - more than one table in a tab

    Hi all,
    I'm building a web query using the following code found on SDN:
    <HTML>
    <!-- BW data source object tags -->
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="SET_DATA_PROVIDER"/>
    <param name="NAME" value="DATAPROVIDER_2"/>
    <param name="QUERY" value="EP_DWM_RIDEF44_LIGNOVA"/>
    <param name="INFOCUBE" value="EPDWMC03"/>
    DATA_PROVIDER: DATAPROVIDER_2
    </object>
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="SET_DATA_PROVIDER"/>
    <param name="NAME" value="DATAPROVIDER_1"/>
    <param name="QUERY" value="EP_DWM_RIDEF44_DESLIG"/>
    <param name="INFOCUBE" value="EPDWMC03"/>
    DATA_PROVIDER: DATAPROVIDER_1
    </object>
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="SET_PROPERTIES"/>
    <param name="TEMPLATE_ID" value="ZBWTESTE"/>
    TEMPLATE PROPERTIES
    </object>
    <HEAD>
    <TITLE>BW Web Application</TITLE>
    <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
    <script type="text/javascript">
    <!--
    /* function goto_tab: Show all items, starting with tabname, Hide all other items */
    function goto_tab(tabname) {
    SAPBWOpenURL(SAP_BW_URL_Get()'&item=TAB*&multi=X&hidden=X&cmd_1=item%3d'tabname+'*%26hidden%3d %26multi%3dX');
    /* DHTML function to set correct span-Tag visible
    For each Tab in Tab-Header (head_TAB) check, if item TABx is visible
    If Item is visible set Header as selected
    Otherwise set corresponding span-Tag to not visible */
    function set_actual_tab() {
    i=0;
    do {
    i++;
    if (document.getElementById('head_TAB'+i) != null) {
    /* Check if Object tag is hidden */
    var prop = SAPBWGetItemProp('TAB'+i);
    var hidden=true;
    if (prop != null){
    for(j=1;j<prop.length;j++){
    if (prop[j][0] == "HIDDEN") hidden = (prop[j][1]=='X');
    if (hidden) {
    document.getElementById("TAB"+i).setAttribute('style', 'display:none;visibility:false;',false);
    else {
    document.getElementById("head_TAB"+i).setAttribute('className', 'SAPBEXTbsTABsel',false);
    } while (document.getElementById('head_TAB'+i) != null)
    -->
    </script>
    </HEAD>
    <BODY>
    <P> </P>
    <P>
    <TABLE cellSpacing=0 cellPadding=5 border=0>
    <TR>
    <TD vAlign=top><object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="CHART_1"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
    ITEM: CHART_1
    </object></TD>
    <TD vAlign=top><object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="CHART_2"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
    ITEM: CHART_2
    </object></TD>
    </TR></TABLE></P>
    <table cellspacing="0" cellpadding="5" border="0" id="tabheader">
    <tr>
    <td class="SAPBEXTbsTab" id="head_TAB1"><A href="javascript:goto_tab('TAB1')">Tab 1</A>
    </td>
    <td class="SAPBEXTbsTab" id="head_TAB2"><A href="javascript:goto_tab('TAB2')">Tab 2</A>
    </td>
    <td class="SAPBEXTbsTab" id="head_TAB3"><A href="javascript:goto_tab('TAB3')">Tab 3</A>
    </td>
    </tr>
    </table>
    <table width="100%" class="SAPBEXTbsBdyEdg" cellspacing="0" cellpadding="5" border="0">
    <tr>
    <td valign="top" >
    <span id="TAB1"> 
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TAB1"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
    <param name="BLOCK_SIZE" value=""/>
    ITEM: TAB1
    </object> 
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TAB1NAVIGATIONBLOCK_1"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
    ITEM: TAB1NAVIGATIONBLOCK_1
    </object>
    </span>
    <span id="TAB2" >
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TAB2"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
    <param name="HIDDEN" value="X"/>
    <param name="BLOCK_SIZE" value=""/>
    ITEM: TAB2
    </object> 
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TAB2NAVIGATIONBLOCK_2"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
    <param name="HIDDEN" value="X"/>
    ITEM: TAB2NAVIGATIONBLOCK_2
    </object>
    </span>
    <span id="TAB3" > <SPAN id=TAB3><object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TAB3"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
    <param name="HIDDEN" value="X"/>
    <param name="BLOCK_SIZE" value=""/>
    ITEM: TAB3
    </object><object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TAB3NAVIGATIONBLOCK_3"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
    <param name="HIDDEN" value="X"/>
    ITEM: TAB3NAVIGATIONBLOCK_3
    </object></SPAN>
    </span>
    </td>
    </tr>
    </table>
    <script type="text/javascript">
    <!--
    /* This function call is needed to set the correct state */
    set_actual_tab();
    -->
    </script>
    </BODY>
    </HTML>
    This perfectly works with one table and one nav. block per tab. When I include a second table and a second nav. blocks in some tab, it doesn't work properly anymore (the selected tab is not highlighted). I think that I'm not naming the table and nav. block properly:
    ITEM: TAB1
    ITEM: TAB1NAVIGATIONBLOCK_1
    Second table?
    Second nav. block?
    Could someone help me further?
    Thanks, Nippon

    with other words..
    strip1 = 2 tables, name TAB1_0 and TAB1_1
    strip2 = 2 tables, name TAB2_0 and TAB2_1
    Navblock strip1 = 2 navblocks, name TAB1_0_NAV and TAB1_1_NAV
    Navblock strip2 = 2 navblocks, name TAB2_0_NAV and TAB2_1_NAV
    The JavaScript Paramter is TAB1, TAB2 and TAB3. So need every strip-group the same "main"-name.
    <td class="SAPBEXTbsTab" id="head_TAB1"><A href="javascript:goto_tab('TAB1')">Tab 1</A>
    </td>
    <td class="SAPBEXTbsTab" id="head_TAB2"><A href="javascript:goto_tab('TAB2')">Tab 2</A>
    </td>
    <td class="SAPBEXTbsTab" id="head_TAB3"><A href="javascript:goto_tab('TAB3')">Tab 3</A>
    First of all JavaScript set all objects to hidden, then set all objects with 'name' visible.
    Regards Sven

  • Web Query with tabs

    Dear All,
    I am using the following code in a Web query which gives me different queries on the three tabs.
    I found this code on SDN.
    <HTML>
    <!-- BW data source object tags -->
    <HEAD>
    <TITLE>BW Web Application</TITLE>
    <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
    <script type="text/javascript">
    <!--
    /* function goto_tab: Show all items, starting with tabname, Hide all other items */
    function goto_tab(tabname) {
    SAPBWOpenURL(SAP_BW_URL_Get()'&item=TAB*&multi=X&hidden=X&cmd_1=item%3d'tabname+'*%26hidden%3d %26multi%3dX');
    /* DHTML function to set correct span-Tag visible
    For each Tab in Tab-Header (head_TAB) check, if item TABx is visible
    If Item is visible set Header as selected
    Otherwise set corresponding span-Tag to not visible */
    function set_actual_tab() {
    i=0;
    do {
    i++;
    if (document.getElementById('head_TAB'+i) != null) {
    /* Check if Object tag is hidden */
    var prop = SAPBWGetItemProp('TAB'+i);
    var hidden=true;
    if (prop != null){
    for(j=1;j<prop.length;j++){
    if (prop[j][0] == "HIDDEN") hidden = (prop[j][1]=='X');
    if (hidden) {
    document.getElementById("TAB"+i).setAttribute('style', 'display:none;visibility:false;',false);
    else {
    document.getElementById("head_TAB"+i).setAttribute('className', 'SAPBEXTbsTABsel',false);
    } while (document.getElementById('head_TAB'+i) != null)
    -->
    </script>
    </HEAD>
    <BODY>
    <P> </P>
    <P>
    <TABLE cellSpacing=0 cellPadding=5 border=0>
      <TR>
        <TD vAlign=top><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="CHART_1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
             ITEM:            CHART_1
    </object></TD>
    <TD vAlign=top><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="CHART_2"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             ITEM:            CHART_2
    </object></TD>
    </TR></TABLE></P>
    <table cellspacing="0" cellpadding="5" border="0" id="tabheader">
    <tr>
    <td class="SAPBEXTbsTab" id="head_TAB1"><A href="javascript:goto_tab('TAB1')">Tab 1</A>
    </td>
    <td class="SAPBEXTbsTab" id="head_TAB2"><A href="javascript:goto_tab('TAB2')">Tab 2</A>
    </td>
    <td class="SAPBEXTbsTab" id="head_TAB3"><A href="javascript:goto_tab('TAB3')">Tab 3</A>
    </td>
    </tr>
    </table>
    <table width="100%" class="SAPBEXTbsBdyEdg" cellspacing="0" cellpadding="5" border="0">
    <tr>
    <td valign="top" >
    <span id="TAB1"> 
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
             <param name="BLOCK_SIZE" value=""/>
             ITEM:            TAB1
    </object> 
    </span>
    <span id="TAB2" >
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB2"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             <param name="HIDDEN" value="X"/>
             <param name="BLOCK_SIZE" value=""/>
             ITEM:            TAB2
    </object> 
    </span>
    <span id="TAB3" > <SPAN id=TAB3><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB3"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             <param name="HIDDEN" value="X"/>
             <param name="BLOCK_SIZE" value=""/>
             ITEM:            TAB3
    </object></SPAN>
    </span>
    </td>
    </tr>
    </table>
    <script type="text/javascript">
    <!--
    /* This function call is needed to set the correct state */
    set_actual_tab();
    -->
    </script>
    </BODY>
    </HTML>
    if I wanted to extend the code to include the navigation block for the 3 queries in all the three tabs.. any ideas how to do that?

    Hi KBWUSER,  I tested this template in a BW 3.5 system, should be worth a try to check whether it works in your 3.1C system:
    <HTML>
    <!-- BW data source object tags -->
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="SET_DATA_PROVIDER"/>
             <param name="NAME" value="DATAPROVIDER_2"/>
             <param name="QUERY" value="EP_DWM_RIDEF44_LIGNOVA"/>
             <param name="INFOCUBE" value="EPDWMC03"/>
             DATA_PROVIDER:             DATAPROVIDER_2
    </object>
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="SET_DATA_PROVIDER"/>
             <param name="NAME" value="DATAPROVIDER_1"/>
             <param name="QUERY" value="EP_DWM_RIDEF44_DESLIG"/>
             <param name="INFOCUBE" value="EPDWMC03"/>
             DATA_PROVIDER:             DATAPROVIDER_1
    </object>
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="SET_PROPERTIES"/>
             <param name="TEMPLATE_ID" value="ZBWTESTE"/>
             TEMPLATE PROPERTIES
    </object>
    <HEAD>
    <TITLE>BW Web Application</TITLE>
    <link href="/sap/bw/Mime/BEx/StyleSheets/BWReports.css" type="text/css" rel="stylesheet"/>
    <script type="text/javascript">
    <!--
    /* function goto_tab: Show all items, starting with tabname, Hide all other items */
    function goto_tab(tabname) {
    SAPBWOpenURL(SAP_BW_URL_Get()'&item=TAB*&multi=X&hidden=X&cmd_1=item%3d'tabname+'*%26hidden%3d %26multi%3dX');
    /* DHTML function to set correct span-Tag visible
    For each Tab in Tab-Header (head_TAB) check, if item TABx is visible
    If Item is visible set Header as selected
    Otherwise set corresponding span-Tag to not visible */
    function set_actual_tab() {
    i=0;
    do {
    i++;
    if (document.getElementById('head_TAB'+i) != null) {
    /* Check if Object tag is hidden */
    var prop = SAPBWGetItemProp('TAB'+i);
    var hidden=true;
    if (prop != null){
    for(j=1;j<prop.length;j++){
    if (prop[j][0] == "HIDDEN") hidden = (prop[j][1]=='X');
    if (hidden) {
    document.getElementById("TAB"+i).setAttribute('style', 'display:none;visibility:false;',false);
    else {
    document.getElementById("head_TAB"+i).setAttribute('className', 'SAPBEXTbsTABsel',false);
    } while (document.getElementById('head_TAB'+i) != null)
    -->
    </script>
    </HEAD>
    <BODY>
    <P> </P>
    <P>
    <TABLE cellSpacing=0 cellPadding=5 border=0>
    <TR>
    <TD vAlign=top><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="CHART_1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
             ITEM:            CHART_1
    </object></TD>
    <TD vAlign=top><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="CHART_2"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_CHART"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             ITEM:            CHART_2
    </object></TD>
    </TR></TABLE></P>
    <table cellspacing="0" cellpadding="5" border="0" id="tabheader">
    <tr>
    <td class="SAPBEXTbsTab" id="head_TAB1"><A href="javascript:goto_tab('TAB1')">Tab 1</A>
    </td>
    <td class="SAPBEXTbsTab" id="head_TAB2"><A href="javascript:goto_tab('TAB2')">Tab 2</A>
    </td>
    <td class="SAPBEXTbsTab" id="head_TAB3"><A href="javascript:goto_tab('TAB3')">Tab 3</A>
    </td>
    </tr>
    </table>
    <table width="100%" class="SAPBEXTbsBdyEdg" cellspacing="0" cellpadding="5" border="0">
    <tr>
    <td valign="top" >
    <span id="TAB1"> 
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             <param name="BLOCK_SIZE" value=""/>
             ITEM:            TAB1
    </object> 
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB1NAVIGATIONBLOCK_1"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             ITEM:            TAB1NAVIGATIONBLOCK_1
    </object>
    </span>
    <span id="TAB2" >
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB2"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             <param name="HIDDEN" value="X"/>
             <param name="BLOCK_SIZE" value=""/>
             ITEM:            TAB2
    </object> 
    <object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB2NAVIGATIONBLOCK_2"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             <param name="HIDDEN" value="X"/>
             ITEM:            TAB2NAVIGATIONBLOCK_2
    </object>
    </span>
    <span id="TAB3" > <SPAN id=TAB3><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB3"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             <param name="HIDDEN" value="X"/>
             <param name="BLOCK_SIZE" value=""/>
             ITEM:            TAB3
    </object><object>
             <param name="OWNER" value="SAP_BW"/>
             <param name="CMD" value="GET_ITEM"/>
             <param name="NAME" value="TAB3NAVIGATIONBLOCK_3"/>
             <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_NAV_BLOCK"/>
             <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
             <param name="HIDDEN" value="X"/>
             ITEM:            TAB3NAVIGATIONBLOCK_3
    </object></SPAN>
    </span>
    </td>
    </tr>
    </table>
    <script type="text/javascript">
    <!--
    /* This function call is needed to set the correct state */
    set_actual_tab();
    -->
    </script>
    </BODY>
    </HTML>

  • Excel web app Review tab with SharePoint 2013

    Is there a way to get the review tab to show up in Excel web app with SharePoint 2013 on-prem?  Users want to be able to use the "add comments" feature while in the excel web app.

    Hi,
    That functionality isn't available in Excel Web App on-premise. I just applied the Oct 2014 CU to WAC and do not have it, so the feature just hasn't made it down yet.
    You can use the "add comments" tab in excel client. 
    Here is a similar post, you can take a look at:
    https://social.technet.microsoft.com/Forums/office/en-US/b0f3ab85-8f46-484b-8fdb-407f57846b61/office-wep-app-review-tab-is-not-disponible?forum=sharepointgeneral
    Best Regards,
    Lisa Chen
    TechNet Community Support
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Office Web Apps Server 2013 - Word Web App - Problem with Tab space

    Hello We have Office Web Apps Server 2013 running with SharePoint 2013.  Users Editing a Word document with Office Web Apps, can't use "Tabs", any Word document with Tabs; the tabs are replaced with a single space.
    Has anyone noticed this?  Is this a bug?
    -thanks
    thomas
    -Tom

    Yes, currently the Word Web App does not support
    Tab Keyboard shortcut for editing document content .
    For more information, you can have a look at
    the article:
    http://office.microsoft.com/en-us/office-online-help/keyboard-shortcuts-in-word-online-HA010378332.aspx?CTT=5&origin=HA010380212
    http://social.technet.microsoft.com/Forums/en-US/3f5978d3-67a1-4c8c-981f-32493d72610b/office-web-apps-server-2013-word-web-app-problem-with-tab-space?forum=sharepointgeneral

  • On certain web sites(with java applets embedded or rich content),sometimes browser hotkeys are beeing used with other functionality (eg.: youtube uses ctrl + tab for sliding between player controls).How can I prevent this?

    On certain web sites(with java applets embedded or rich content),sometimes browser hotkeys are beeing used with other functionality (eg.: youtube uses ctrl + tab for sliding between player controls).How can I prevent this ?

    Thanks for posting this!
    I would only mention that your definition is incomplete for this -
    Contextual selector A type of Style Sheet Selector that
    and that it's most often referred to now as a Descendent selector, not a contextual selector.  It's basically the same as the Compound selector that you have already defined....

  • Safari will not open certain web sites with https or http

    safari will not open certain web sites with https or http,any help will be welcome,it must be a security setting,but i have not changed any settings.

    From your Safari menu bar click Safari > Preferences then select the Exensions tab.
    If there are any installed, switch the button to off, quit and relaunch Safari to test.
    If there is more than one extension insalled, uninstall one a time, quit and relaunch Safari and test.

  • Calling Web Service with SOAP header from BPEL

    Hi,
    I am calling a web service (with header information) from BPEL. In the Invoke activity, i created a header variable to pass the header information.
    But, when i test the BPEL service, invoke activity fails because the header information is not being passed.
    Below is the error message (copied from clipboard).
    +<messages><input><Invoke_1_getsubinfo_InputVariable><part xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" name="parameters"><getsubinfoElement xmlns="http://ws/its/tabs/webservices/SingleRowWS/SingleRowWS.wsdl">+
    +<pSubnoin>+
    +<insubno>12345678</insubno>+
    +</pSubnoin>+
    +</getsubinfoElement>+
    +</part></Invoke_1_getsubinfo_InputVariable></input><fault><bindingFault xmlns="http://schemas.oracle.com/bpel/extension"><part name="summary"><summary>exception on JaxRpc invoke:+
    start fault message:+
    Internal Server Error (Caught exception while handling request: javax.xml.rpc.JAXRPCException: Not authenticated user)+
    *:end fault message*</summary>
    +</part></bindingFault></fault></messages>+
    As said, no header information is visible in the Invoke activity.
    Please provide help for the above issue.
    -MJ

    Hello Patrick,
    Thanks for the response. I am using normal assign activity to assign values to the header variable as shown below. HeadMT is the header variable which is passed in the invoke activity.
    +<assign name="Assign_Header">+
    +<copy>+
    +<from expression="'tkl12'"/>+
    +<to query="/ns1:LOGIN_INFO/ns1:USER_NAME" variable="*HeadMT*"+
    part="payload"/>
    +</copy>+
    +<copy>+
    +<from expression="'tkl123'"/>+
    +<to query="/ns1:LOGIN_INFO/ns1:PASSWORD" variable="*HeadMT*"+
    part="payload"/>
    +</copy>+
    +<copy>+
    +<from expression="'TKL'"/>+
    +<to query="/ns1:LOGIN_INFO/ns1:CHANNEL_ID" variable="*HeadMT*"+
    part="payload"/>
    +</copy>+
    +</assign>+
    The expected input by the web service is as below with the header information highlighted.
    +<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:ns1="http://ws/webservices/RowWS/RowWS.wsdl">+
    +*<soap:Header>*+
    +*<ns1:LOGIN_INFO>*+
    +*<ns1:USERNAME>tkl12</ns1:USERNAME>*+
    +*<ns1:PASSWORD>tkl123</ns1:PASSWORD>*+
    +*<ns1:CHANNEL_ID>TKL</ns1:CHANNEL_ID>*+
    +*</ns1:LOGIN_INFO>*+
    +*</soap:Header>*+
    +<soap:Body>+
    +<ns1:substatusElement>+
    +<ns1:pInparam>+
    +<ns1:insubno>7674988</ns1:insubno>+
    +</ns1:pInparam>+
    +</ns1:substatusElement>+
    +</soap:Body>+
    +</soap:Envelope>+

  • Template with tabs Export to excel with variable dataprovider

    I have looked at examples in this forum of how others have used an "export to excel" button with a variable dataprovider but I cannot get these examples to work for my situation.
    I have a web template with 2 tabs, 1 dataprovider on each. The template has an icon button for "export to excel". The code came from 0QUERY_TEMPLATE. The tabs require a JavaScript function which hides all items except for the one on the selected tab and sets the property for the selected tab. I got the code for this from the WEB API reference for BW 3.x.
    I cannot get the button "export to excel" to export the selected (non-hidden) data provider. I need somehow to have a variable for dataprovider on the command to export. 
    Any help would be greatly appreciated.
    Provided below is my template.
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="SET_PROPERTIES"/>
    <param name="TEMPLATE_ID" value="ZTEST_EXPORT"/>
    <param name="VARIABLE_SCREEN" value="X"/>
    TEMPLATE PROPERTIES
    </object>
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="SET_DATA_PROVIDER"/>
    <param name="NAME" value="DATAPROVIDER_1"/>
    <param name="QUERY" value="ZPC_010"/>
    <param name="INFOCUBE" value="ZPC_M01"/>
    DATA_PROVIDER: DATAPROVIDER_1
    </object>
    <object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="SET_DATA_PROVIDER"/>
    <param name="NAME" value="DATAPROVIDER_2"/>
    <param name="QUERY" value="ZPC_011"/>
    <param name="INFOCUBE" value="ZPC_M01"/>
    DATA_PROVIDER: DATAPROVIDER_2
    </object>
    <html>
    <head>
    <link href="/sap/bw/Mime/Customer/StyleSheets/ServicePortalBWReports.css" type="text/css" rel="stylesheet"/>
    <Script type="text/javascript">
    <!--
    /* function goto_tab: Show all items, starting with tabname, Hide all other items */
    function goto_tab(tabname) {
    SAPBWOpenURL(SAP_BW_URL_Get()'&item=TAB*&multi=X&hidden=X&cmd_1=item%3d'tabname+'*%26hidden%3d %26multi%3dX');
    /* DHTML function to set correct span-Tag visible
    For each Tab in Tab-Header (head_TAB) check, if item TABx is visible
    If Item is visible set Header as selected
    Otherwise set corresponding span-Tag to not visible */
    function set_actual_tab() {
    i=0;
    do {
    i++;
    if (document.getElementById('head_TAB'+i) != null) {
    /* Check if Object tag is hidden */
    var prop = SAPBWGetItemProp('TAB'+i);
    var hidden=true;
    if (prop != null){
    for(j=1;j<prop.length;j++){
    if (prop[j][0] == "HIDDEN") hidden = (prop[j][1]=='X');
    if (hidden) {
    document.getElementById("TAB"+i).setAttribute('style', 'display:none;visibility:false;',false);
    else {
    document.getElementById("head_TAB"+i).setAttribute('className', 'SAPBEXTbsTABsel',false);
    } while (document.getElementById('head_TAB'+i) != null)
    -->
    </script>
    </head>
    <body>
    <TABLE class=SAPBEXNavLineBorder cellSpacing=0 cellPadding=1 width=5 border=0>
    <TR>
    <TD width="5%">
    <TABLE cellSpacing=1 cellPadding=2 width="100%" border=0>
    <TR>
    <!-- Display Export Excel--->
    <TD class=SAPBEXNavLine><A href="<SAP_BW_URL CMD='EXPORT' FORMAT='XLS' DATA_PROVIDER='DATAPROVIDER_1'>">
    <IMG alt="Export to MS Excel" src="Mime/BEx/Icons/S_X_XLS.gif" border=0></A></TD>
    </TD></TR></TABLE></TD></TR></TABLE>
    <TABLE cellSpacing=1 cellPadding=5 width="75%" border=0>
    <TR>
    <TD vAlign=top>
    <P>
    <TABLE cellSpacing=0 cellPadding=5 border=0>
    <TR>
    <TD class=SAPBEXTbsTab id=head_TAB1><A href="javascript:goto_tab('TAB1')">Tab 1</A></TD>
    <TD class=SAPBEXTbsTab id=head_TAB2><A href="javascript:goto_tab('TAB2')">Tab 2</A></TD>
    </TR></TABLE>
    <TABLE class=SAPBEXTbsBdyEdg cellSpacing=0 cellPadding=5 width="5%"
    border=0>
    <TR>
    <TD vAlign=top>
    <SPAN id=TAB1><object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TAB1"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_1"/>
    <param name="GENERATE_CAPTION" value=""/>
    ITEM: TAB1
    </object></SPAN>
    <SPAN id=TAB2><object>
    <param name="OWNER" value="SAP_BW"/>
    <param name="CMD" value="GET_ITEM"/>
    <param name="NAME" value="TAB2"/>
    <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_GRID"/>
    <param name="DATA_PROVIDER" value="DATAPROVIDER_2"/>
    <param name="GENERATE_CAPTION" value=""/>
    <param name="HIDDEN" value="X"/>
    ITEM: TAB2
    </object></SPAN>
    </TD></TR></TABLE></P>
    <SCRIPT type=text/javascript>
    <!--
    /* This function call is needed to set the correct state */
    set_actual_tab();
    -->
    </SCRIPT>
    </TD></TR></TABLE>
    </body>
    </html>

    Kevin,
    Try calling a javascript function (e.g. excel_export) when the export icon is clicked on.
    Using the prop array find the tab that is not hidden and then use that index to build your export command. i.e. if tab1 is visible then pass dataprovider_1 to the excel download command.
    Another method would be to place a hidden field on the form to store the dataprovider and then read that field in the javascript function.  You would have to update this field when you switched between the tabs.
    Cheers,
    Kelly

  • Consuming Synchronous RESTful Web Service with PI

    Dear experts,
    i have a scenario for consuming RESTful web service.
    i have followed all the steps showed in the following link for configuring my interface.
    http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/08/11/calling-synchronous-restful-web-service-with-pi--i
    but still i am facing issues at the communication channel level, the trace of the communication channel is as follows
    Error While Sending Message: Additional error text from response: com.sap.engine.interfaces.messaging.api.exception.MessagingException: org.apache.axis.ConfigurationException: adapter is null org.apache.axis.ConfigurationException: adapter is null at com.sap.aii.adapter.axis.modules.HandlerCore.process(HandlerCore.java:60) at com.sap.aii.adapter.axis.modules.HandlerBean.process(HandlerBean.java:86) at sun.reflect.GeneratedMethodAccessor602.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MethodRetry.invoke(Interceptors_MethodRetry.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:23) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at com.sun.proxy.$Proxy3284.process(Unknown Source) at com.sap.aii.af.app.mp.ejb.ModuleProcessorBean.process(ModuleProcessorBean.java:264) at sun.reflect.GeneratedMethodAccessor544.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MethodRetry.invoke(Interceptors_MethodRetry.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:23) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at com.sun.proxy.$Proxy646.process(Unknown Source) at com.sap.aii.af.app.listener.AFWListenerBean.onMessage(AFWListenerBean.java:422) at sun.reflect.GeneratedMethodAccessor558.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:47) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:50) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:37) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_MethodRetry.invoke(Interceptors_MethodRetry.java:46) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:191) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:23) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:25) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:17) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:179) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:138) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at com.sun.proxy.$Proxy603.onMessage(Unknown Source) at com.sap.engine.messaging.impl.spi.ServicesImpl.deliver(ServicesImpl.java:362) at com.sap.aii.adapter.xi.ms.XIEventHandler.onDeliver(XIEventHandler.java:1091) at com.sap.engine.messaging.impl.core.queue.consumer.RequestConsumer.onMessage(RequestConsumer.java:75) at com.sap.engine.messaging.impl.core.queue.Queue.run(Queue.java:1017) at com.sap.engine.messaging.runtime.MSWorkWrapper.run(MSWorkWrapper.java:58) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:185) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:302)
    i have also attached screen shots of module tab of my SOAP(Axis) adapter
    regards,
    sushant

    Hi Sushant
    Check the question 11.I am getting org.apache.axis.ConfiguraitonException: adapter is null in this note 1039369 - FAQ XI Axis Adapter
    (you will find all the answers in the attachment section)
    Regards.

  • Consuming and Providing Web Service with JD Edwards ERP system

    Hi,
    I would like to create web services with c++ or java OR any other easier way .
    I need to use that web services to use in Share point to interact with JD Edwards ERP system .
    Pls Note : Since not having license for JD Edwards, I need to create and call from Sharepoint Web service to JD edwards.
                       and not from JD edwards web service.
    Could anybody guide me in this.
    Thanks in advance.

    I had this error again so I thought I would post my solution:
    The issue is SAP needs to know the certificates being used by the web site being called.  These certificates are automatically installed in your browser but need to be manually installed in SAP.  This is what I did:
    How to find/install new certificates
    Make sure you run Internet Explorer as an Administrator so you can export the certificates
    Go to the web site that SAP is trying to call in Internet Explorer
    Double click on the lock in the address bar
    View certificates
    Find the certificates that are being used
    Tools --> Internet Options --> Content --> Certificates
    Click on the “Trusted Root Certification Authorities” tab
    Find the certificate identified in step iii
    Export as a CER certificate
    Click on the “Intermediate Certification Authorities” tab
    Find the certificate identified in step iii
    Export as a CER certificate
    Go to STRUST in SAP
    Import the Certificates in the “Anonymous” or “Standard” SSL client
    Save
    RESTART the ICM via t-code SMICM  <-- Critical!!!
    Test

  • How to publish custom web site with own domain name?

    Hey out there. I wonder if anyone can give me any tips on how to publish a web site with my own domain name.
    I have a web site I'm building and I want to purchase a domain name and then publish the site using that domain name.
    I know how to buy a domain name. I have a .mac account so I'm hoping that .mac can host the site. What I don't quite understand how to do is get .mac to host the site using that domain name. I looked through Apple Support but couldn't find what I was looking for. Just wondering if anyone has been in this situation. Thanks in advance.
    Dave
    [email protected]

    Dave ~ Welcome to the discussions. .Mac was re-branded as MobileMe last July. If you're not building your site with iWeb, it's considered to be a "custom" website. These Apple docs may help:
    MobileMe: How to publish a custom website
    iWeb ’08: Using your own domain name
    ...Use this search page to find such documents:
    http://support.apple.com/kb/index?page=search
    Note that you don't need to have iLife '08 to be able to direct your domain name to your custom website published to MobileMe. As someone wrote on another thread:
    "My personal domain is linked to my MM but i don't even have ilife on my mac. When you go to the options in MM to link your personal domain to your MM it provides directions that will guide you with setting up your godaddy settings."
    ...Where "MM" is MobileMe here:
    http://me.com/account
    ...+Personal Domain+ tab, and "godaddy" is wherever your domain name is registered.

  • Biztalk 2010 - Consume Web Service with Certificate

    Hi
    I have to consume a java web service with Biztalk that requires authentication via a client certificate. Until now I have not been able to consume any web service where any kind of authentication was needed. Simple web services without authentication are
    no problem. Also using SoapUI works perfectly fine.
    I am generating the XSDs and the port binding with the WCF wizard in VS2010. I've read several comments that it's not possible to consume web services with the WCF-WSHttp adapter when the message format should be SOAP 1.1. Therefore I'm trying with the WCF-BasicHttp
    and WCF-Custom adapters, but I did not suceed in receiving a positive response yet.
    The web service I want to consume uses a client certificate (with a private key) and two root certificates. When I use the BasicHttp adapter I choose either 'Transport' or 'TransportWithMessageCredential' but none of them work. I also have to supply a client
    and a service certificate. I always use the one with the private key for the client but I'm not sure which one I have to use for the service. Is there a possibility that I have to provide both root certificates and if so, how can I achieve this?
    Hope the question makes sense somehow... thanks for any input.
    Error message that I receive currently is that the server needs a client certificate. However I attached it in the send port properties under the tab "Security" => mode "TransportWithMessageCredential".

    Adapter: WCF-Custom
    Binding: customBinding
    Cannot send pictures (yet).
    <configuration>
    <enterpriseLibrary.ConfigurationSource selectedSource="ESB File Configuration Source" />
    <system.serviceModel>
    <client>
    <endpoint address="...." behaviorConfiguration="EndpointBehavior" binding="customBinding" bindingConfiguration="ReceiptBinding" contract="BizTalk" name="WebServicePort" />
    </client>
    <behaviors>
    <endpointBehaviors>
    <behavior name="EndpointBehavior">
    <clientCredentials>
    <clientCertificate findValue="..." x509FindType="FindByThumbprint" />
    <serviceCertificate>
    <defaultCertificate findValue="..." storeLocation="LocalMachine" storeName="AuthRoot" x509FindType="FindByThumbprint" />
    </serviceCertificate>
    </clientCredentials>
    </behavior>
    </endpointBehaviors>
    <serviceBehaviors>
    <behavior name="ServiceBehavior" />
    </serviceBehaviors>
    </behaviors>
    <bindings>
    <customBinding>
    <clear />
    <binding name="ReceiptBinding">
    <textMessageEncoding messageVersion="Soap11" />
    <security authenticationMode="MutualCertificate" />
    <httpsTransport proxyAuthenticationScheme="Basic" requireClientCertificate="true" />
    </binding>
    </customBinding>
    </bindings>
    </system.serviceModel>
    </configuration>

  • Exploring Web Services with Dreamweaver CS4

    How can you explore web services with Dreamweaver CS4? You
    used to be able to go under Components and add Web Services and
    enter the url for the WSDL (ex.
    http://www.communitymx.com/content/article.cfm?cid=70AAB).
    How do you do that now in CS4?

    Yeah, I knew there were several workspaces. I tried them all
    but none showed the Components/Webservices tab.
    That was an important tab for me since I do a lot of work
    with cfcs in connection with Flex Builder 3.
    I just hate having to go on Easter Egg hunts to find the
    functions that have been there for years.
    Like now I cannot copy and paste some code from one file to
    another and the command tab bar is gone for the CFML commands.
    It's just a real pain in rear end to have waste a bunch of
    time locating where someone decided to bury stuff.

Maybe you are looking for

  • Just upgraded to lion 10.7.3 Safari problems.  Please help.

       Really need help with this one.  Yesterday I upgraded to Lion 10.7.3.  Safari does not work in my account.  When I try to log onto safari it just pulls up a blank page with a spinning beach ball.  I logged into a guest accout and it worked fine. 

  • A question about /usr/include/sys/select.h header file

    good day! i hope i can get some help about this and i would be very grateful if my question will be answered. i have a question regarding the select.h header file that we include in our programs when we use the select(3C) function. * Select uses bit

  • Yahoo Mail -Not working in E72

    Hi, all, I have E72, and has been using E Mail client in the mobile, for sending and receiving GMAIL Emails, (through Nokia E Mail).. Now, i am trying to enable, Yahoo mail (Not paid version) also like this.. Have followed, all the suggestions on the

  • Incompatibility of Acrobat 6 between Win XP & Win 7

    I was using Adobe Acrobat V6.0 easly on a former laptop based on Win XP. I re-installed the application on a new laptop based on Win 7 and since then, I am experiencing problems related to printing & converting files into pdf. Apparently, the incompa

  • Removing Components from display

    Hi, I have a JPanel with a number of JLabels inside. All visible on the screen. I want to remove all the JLabels (permanently), so I call: jPanel.removeAll();    jPanel.validate();Yet the JLabels do not disappear from the screen. Any ideas on this ap