WebAccess problem with Windows Client 8

Hi, 
We have a problem, with external access with windows 8 client Only, with the following error 
The user "user@domain", on client computer "IP:33050", has initiated an outbound connection. This connection may not be authenticated yet.
There's Gateway and Webaccess on the same server
thanks
Rémy
http://www.blogotec.fr MCITP Server Administrator MCTS Virtualisation

Hi,
Have you tried to turn off Windows Firewall, then test the result again, check whether Firewall is the culprit.  Seems the outbound connection is blocked in Windows Firewall, check your Connection Security Rule Properties in Windows Firewall.
Connection Security Rule Properties Page: Authentication Tab
http://technet.microsoft.com/en-us/library/dd448596(v=ws.10).aspx
Yolanda Zhu
TechNet Community Support

Similar Messages

  • Problems with QuickVPN client

    Hello,
    I experiance problems with QuickVPN client (version 1.4.1.2). I'm trying to connect to router SA520 with 1.1.65 firmware,
    vpn tunell is established, but client says "The remote gateway is not responding. Do you want to wait?"
    in case i click no, it drops vpn tunell
    QuickVPN client log looks like this:
    2010/08/18 12:13:27 [STATUS]OS Version: Windows 7
    2010/08/18 12:13:27 [STATUS]Windows Firewall Domain Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]Windows Firewall Private Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]Windows Firewall Private Profile Settings: ON
    2010/08/18 12:13:27 [STATUS]One network interface detected with IP address 192.168.1.100
    2010/08/18 12:13:27 [STATUS]Connecting...
    2010/08/18 12:13:27 [DEBUG]Input VPN Server Address = vpn.in-volv.lv
    2010/08/18 12:13:28 [STATUS]Connecting to remote gateway with IP address: 78.28.223.10
    2010/08/18 12:13:28 [WARNING]Server's certificate doesn't exist on your local computer.
    2010/08/18 12:13:30 [STATUS]Remote gateway was reached by https ...
    2010/08/18 12:13:30 [STATUS]Provisioning...
    2010/08/18 12:13:39 [STATUS]Success to connect.
    2010/08/18 12:13:39 [STATUS]Tunnel is configured. Ping test is about to start.
    2010/08/18 12:13:39 [STATUS]Verifying Network...
    2010/08/18 12:13:44 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:47 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:50 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:53 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:13:56 [WARNING]Failed to ping remote VPN Router!
    2010/08/18 12:14:08 [WARNING]Ping was blocked, which can be caused by an unexpected disconnect.
    2010/08/18 12:14:12 [STATUS]Disconnecting...
    2010/08/18 12:14:15 [STATUS]Success to disconnect.
    Server logs look like this:
    2010-08-18 12:28:49: INFO:  Adding IPSec configuration with identifier "arvils"
    2010-08-18 12:29:02: INFO:  Configuration found for 83.243.93.200[500].
    2010-08-18 12:29:02: INFO:  Received request for new phase 1 negotiation: 78.28.223.10[500]<=>83.243.93.200[500]
    2010-08-18 12:29:02: INFO:  Beginning Identity Protection mode.
    2010-08-18 12:29:02: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 12:29:02: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 12:29:02: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  Received unknown Vendor ID
    2010-08-18 12:29:02: INFO:  For 83.243.93.200[500], Selected NAT-T version: RFC 3947
    2010-08-18 12:29:02: INFO:  NAT-D payload matches for 78.28.223.10[500]
    2010-08-18 12:29:02: INFO:  NAT-D payload does not match for 83.243.93.200[500]
    2010-08-18 12:29:02: INFO:  NAT detected: PEER
    2010-08-18 12:29:02: INFO:  Floating ports for NAT-T with peer 83.243.93.200[4500]
    2010-08-18 12:29:02: INFO:  ISAKMP-SA established for 78.28.223.10[4500]-83.243.93.200[4500] with spi:e2cd855a75fc0887:6dc3b2e025152444
    2010-08-18 12:29:02: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 12:29:02: INFO:  Responding to new phase 2 negotiation: 78.28.223.10[0]<=>83.243.93.200[0]
    2010-08-18 12:29:02: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.1.100/32
    2010-08-18 12:29:02: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 12:29:02: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=47693803(0x2d7bfeb)
    2010-08-18 12:29:02: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 78.28.223.10->83.243.93.200 with spi=1079189482(0x40531fea)
    2010-08-18 12:35:57: INFO:  an undead schedule has been deleted: 'pk_recvupdate'.
    2010-08-18 12:35:57: INFO:  Purged IPsec-SA with proto_id=ESP and spi=1079189482(0x40531fea).
    2010-08-18 12:40:46: INFO:  Configuration found for 83.243.93.200[500].
    2010-08-18 12:40:46: INFO:  Received request for new phase 1 negotiation: 78.28.223.10[500]<=>83.243.93.200[500]
    2010-08-18 12:40:46: INFO:  Beginning Identity Protection mode.
    2010-08-18 12:40:46: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 12:40:46: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 12:40:46: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  Received unknown Vendor ID
    2010-08-18 12:40:46: INFO:  For 83.243.93.200[500], Selected NAT-T version: RFC 3947
    2010-08-18 12:40:46: INFO:  NAT-D payload matches for 78.28.223.10[500]
    2010-08-18 12:40:46: INFO:  NAT-D payload does not match for 83.243.93.200[500]
    2010-08-18 12:40:46: INFO:  NAT detected: PEER
    2010-08-18 12:40:46: INFO:  Floating ports for NAT-T with peer 83.243.93.200[4500]
    2010-08-18 12:40:46: INFO:  ISAKMP-SA established for 78.28.223.10[4500]-83.243.93.200[4500] with spi:28447d39874689f9:a2b7da19d8d86413
    2010-08-18 12:40:46: INFO:  Responding to new phase 2 negotiation: 78.28.223.10[0]<=>83.243.93.200[0]
    2010-08-18 12:40:46: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.1.100/32
    2010-08-18 12:40:46: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 12:40:47: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=259246202(0xf73c87a)
    2010-08-18 12:40:47: INFO:  IPsec-SA established[UDP encap 4500->4500]: ESP/Tunnel 78.28.223.10->83.243.93.200 with spi=3642234214(0xd9181566)
    2010-08-18 12:43:27: INFO:  IPsec-SA expired: ESP/Tunnel 83.243.93.200->78.28.223.10 with spi=33356156(0x1fcf97c)
    2010-08-18 12:45:47: INFO:  an undead schedule has been deleted: 'pk_recvupdate'.
    2010-08-18 12:45:47: INFO:  Purged IPsec-SA with proto_id=ESP and spi=3642234214(0xd9181566).
    The most interesting thing is that sometimes this message appears, sometimes not (with the same configuration).
    Please help!

    Hi,
    I have some problem. I am using Windows 7 Entreprice x64. I use SA520 Firmware 1.1.65 and QuickVPN 1.4.1.2 port 60443.
    "The remote gateway is not responding. Do you want to wait"
    2010-08-18 17:25:51: INFO:  Adding IPSec configuration with identifier "username"
    2010-08-18 17:25:51: INFO:  Adding IKE configuration with identifer "username"
    2010-08-18 17:26:04: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:26:04: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=>xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:04: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:26:04: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:26:04: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:26:04: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:04: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:26:04: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:26:04: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:04: INFO:  NAT detected: ME PEER
    2010-08-18 17:26:04: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:26:04: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:ed4f291c71c1b688:7e6a8a0968f878fb
    2010-08-18 17:26:04: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 17:26:04: INFO:  Responding to new phase 2 negotiation: 172.22.5.10[0]<=> xxx.xxx.xxx.xxx[0]
    2010-08-18 17:26:04: INFO:  Using IPsec SA configuration: 192.168.75.0/24<->192.168.170.224/32
    2010-08-18 17:26:04: INFO:  Adjusting peer's encmode 3(3)->Tunnel(1)
    2010-08-18 17:26:05: INFO:  IPsec-SA established[UDP encap 48540->4500]: ESP/Tunnel xxx.xxx.xxx.xxx->172.22.5.10 with spi=239099274(0xe405d8a)
    2010-08-18 17:26:05: INFO:  IPsec-SA established[UDP encap 4500->48540]: ESP/Tunnel 172.22.5.10-> xxx.xxx.xxx.xxx with spi=3886848189(0xe7ac98bd)
    2010-08-18 17:26:07: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:26:07: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=> xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:07: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:26:07: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:26:07: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:26:07: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  Received unknown Vendor ID
    2010-08-18 17:26:07: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:26:07: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:26:07: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:26:07: INFO:  NAT detected: ME PEER
    2010-08-18 17:26:07: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:26:07: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:699f34b434d4318c:df4adca414787d36
    2010-08-18 17:27:14: INFO:  Purged ISAKMP-SA with proto_id=ISAKMP and spi=699f34b434d4318c:df4adca414787d36.
    2010-08-18 17:27:14: INFO:  Configuration found for xxx.xxx.xxx.xxx[235].
    2010-08-18 17:27:14: INFO:  Received request for new phase 1 negotiation: 172.22.5.10[500]<=> xxx.xxx.xxx.xxx[235]
    2010-08-18 17:27:14: INFO:  Beginning Identity Protection mode.
    2010-08-18 17:27:14: INFO:  Received Vendor ID: MS NT5 ISAKMPOAKLEY
    2010-08-18 17:27:14: INFO:  Received Vendor ID: RFC 3947
    2010-08-18 17:27:14: INFO:  Received Vendor ID: draft-ietf-ipsec-nat-t-ike-02
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  Received unknown Vendor ID
    2010-08-18 17:27:14: INFO:  For xxx.xxx.xxx.xxx[235], Selected NAT-T version: RFC 3947
    2010-08-18 17:27:14: INFO:  NAT-D payload does not match for 172.22.5.10[500]
    2010-08-18 17:27:14: INFO:  NAT-D payload does not match for xxx.xxx.xxx.xxx[235]
    2010-08-18 17:27:14: INFO:  NAT detected: ME PEER
    2010-08-18 17:27:15: INFO:  ISAKMP-SA deleted for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:699f34b434d4318c:df4adca414787d36
    2010-08-18 17:27:15: INFO:  Floating ports for NAT-T with peer xxx.xxx.xxx.xxx[48540]
    2010-08-18 17:27:15: INFO:  ISAKMP-SA established for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:3fe5eb0bddbf2b9a:f5c11d7f813ca74a
    2010-08-18 17:27:15: INFO:  Sending Informational Exchange: notify payload[INITIAL-CONTACT]
    2010-08-18 17:28:20: INFO:  Purged ISAKMP-SA with proto_id=ISAKMP and spi=3fe5eb0bddbf2b9a:f5c11d7f813ca74a.
    2010-08-18 17:28:21: INFO:  ISAKMP-SA deleted for 172.22.5.10[4500]- xxx.xxx.xxx.xxx[48540] with spi:3fe5eb0bddbf2b9a:f5c11d7f813ca74a
    With windows XP Pro i dont have this problem.
    Is there a detailed configuration guide?
    10x

  • Problem with windows and my monitor in after effects

    HI . before any thing excuse me for speeking english.
    i have a problem with windows in after effect in my monitor
    my monitor is 15.6 and resolution is 1366*768
    for example when i open interpret footage window i can't see that complete and amount of size window dont visible.
    Thanks.

    Your system doesn't meet the requirements and that is that. AE has required 900 pixel height ever since CS4. Other than changing your screen res or shuffling around windows there is nothing you can do.
    Mylenium

  • Hi anyone having a problem with windows 7 and itunes

    Hi has anyone had a problem with windows 7n and Itunes...My Itunes was working now wont open says files missing reinstall...which I have done several times also other programs that were working now have error message your side by side configuration isnt correct any ideas!!!

    Yes, I am also having trouble with my windows 7n.  I tried to install the download but it didn't have 32 bit for my computer and I don't think it will help me see my phone on my external devices. I can't transfer my photos. Any help would be appreciated.

  • Problems with Windows XP SP3 in Boot Camp

    Hi,
    I have recently received a 21.5" iMac; it is the higher-end of the 21.5" standard configurations. The problems I am having, I believe, specifically relate to drivers.
    Firstly, I get no sound whatsoever in Windows XP SP3 (boot camp); I have tried removing and reinstalling the drivers from the Snow Leopard install disc, but no success. I have no yellow question marks in the device manager window, but the absence of audio still persists.
    Secondly, I cannot gain access to the special functions of the Apple wireless keyboard in Windows XP SP3 via Boot Camp. Again, I have tried reinstalling the drivers, but no success. I have read an Apple support document which states that the keys are only supported on late 2009 Macs; I own one of these Macs, so that cannot be the problem.

    Problems with Windows XP SP3 in Boot Camp
    Boot Camp forums are here: http://discussions.apple.com/category.jspa?categoryID=237

  • I am having a problem with Windows Fusion installed on a MacBook.

    I am having a problem with Windows Fusion installed on a MacBook OS 10.  When attempting to use a Browser, (either IE, or Chrome), under Windows Fusion, I cannot browse to ANY page except Gmail.com.
    I checked all security settings, and found no problem. Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!
    I am not sure if I have some virus on my Windows side, because Google and Safari both work perfectly on my Apple side, just not when running Windows Fusion.
    Is there some setting I am missing, or do you think I have malware/virus issues?? My Internet connection is DEFINITELY working fine - I can send, receive, open, and close all my email on Gmail only, and can navigate freely on Gmail, but cannot get to any other site even hyperlinked to Gmail.
    Any help would be greatly appreciated.
    Thank you very much.

    HartEJ wrote:
    ...Neither browser will allow me to do ANYTHING other than go to Gmail.com!!!...
    If you've already tried my previous suggestions, it may be that something has tampered with the DNS settings in your Windows VM, which might bypass the settings your Mac uses. Assuming you're using Windows 8, these instructions explain how to check and change the DNS settings. There's also a link in those instructions listing a variety of suggested DNS settings. If you do try changing the settings, record what the settings currently are in case you want to return to them.

  • Looking for a site that shows problems with windows patches or updates.

    Looking for a site that shows problems with windows patches or updates...so I know what not to install.
    Plenty of sites list and summarize individual patches, I want one that consolidates problems and complaints so I can better assess the risk. Currently I'm waiting to install patches several days and doing google searches. That works, but I'd rather find a place
    that does it with expertise.
    Which forums would be best to look for such problems.
    Thanks in and advance for suggestions

    Hi,
    I agreed with Cyber and Rick.
    Windows update helps to keep your PC safer—and your software current—by fetching the latest security and feature updates from Microsoft via the Internet.
    Although there might be some problems when installing it, Windows update is not the one to blame.
    For troubleshooting Windows updates, if needed:
    Fix Microsoft Windows Update Issues
    http://support2.microsoft.com/gp/windows-update-issues
    Best regards
    Michael Shao
    TechNet Community Support

  • Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.

    Go to "control panel" then "add or remove programs".  Highlight "Apple software update"  Choose "change" click "Repair"  This should do the trick.  Then download and install iTunes 10.5 again.

  • Tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    I tried to install iTunes 10.5 this morning but an error appeared saying "problem with windows installer package. A program required for this install to complete could not be run." Can someone please help

    Firstly, are you installing iTunes for the first time or are you updating your current version of iTunes?
    If you're installing iTunes for the first time have you tried redownloading the installer package? Perhaps the file you downloaded originally is corrupted...
    http://www.apple.com/itunes/
    If you've tried that, then try installing iTunes as your computer's administrator. To do this right-click the install package and choose "Run as administrator".
    If you're updating iTunes to the most recent version try repairing the Apple Software Update program on your computer. It's under the add/remove programs.
    1. Open the control panel
    2. Open Add/Remove programs (called "Programs and Features" in Windows 7)
    3. Navigate to "Apple Software Update" in the list and click on it
    4. Click on "Change" then select "Repair" (or just select the repair option in Windows 7)
    Once you repair this, try running iTunes and the update again.
    Fingers crossed!

  • Problem with Windows Media Player since installing Firefox 4.0

    Problems with Window Media Player. When I am using Windows Media Player to view a video from another source I am having problems. When I hit pause and then go back to hit play it does not have any sound. The player is not on mute and it keeps going from pause to play with no sound most times. Please help. Thank-you. I have Windows Vista programs.

    What can I do to get the Windows Media Player to work properly?

  • Problems with Windows VISTA and WPA-2

    Hi Guys,
    I am using a Linksys router supporting draft-N; it seems that after some time of usage; Windows Vista stop being able to connect to Linksys using a WPA-2 PSK.
    Everytime you search for the SSID and attempt to connect, the ''network is taking too long to connect''' and Windows always informs the user that ''limited or no connectivity'' even though the signal strength is excellent.
    Is that a common problem in Windows Visa (I am using Home Edition)?

    Yes thats the basica command problem with Windows Vista while connecting to the Wireless Network.... In this you can need to update your Windows Vista OS with all the Latest Patches and the Service Pack to improve more stability on your Vista Computer to get connected to the Wireless Network..

  • Photo sync problem with Windows Vista?

    I did some searching and was wondering if there is a solution to the photo sync problem with Windows Vista. I have gone the route of changing some of my photos to bitmap files but this is was way too much work just to view on ipod. I like to email Apple but could not find a link to do so. As far as I know I have all updates but still the iPod does not sync photos. Is there an update to this that I am missing or am I stuck changing all my photos to .bmp files?
    Thanks,
    Dean.

    I checked out the article and not much help, thanks anyway.
    Would it make a difference if I purchased Adobe Photo Album or would I still be stuck with changing and saving files to .bmp extensions? I have Adobe Photoshop album starter but still have to change file extensions.
    If someone has a solution to this problem I would really be greatfull. I did contact Dell as this is a brand new computer and that was a wash. They did give me a number for Apple but of course I bought the iPod off of ebay and has no warranty on it so unless I pay a fee I'm not calling. It just blows my mind that Microsoft and Apple can't or won't come up with a fix. But I guess when Microsoft wants you to buy the Zune or Apple wants you to buy the overpriced Macintosh why would they waste time on having there products compatible with each other.
    Thanks.

  • Problem with Windows 8.1 and Corseca Byte BT headset

    I recently bought a Corseca Byte bluetooth headset.
    The headset works fine with phones.
    Initially when connected to the laptop running windows 8.1 it works well and continues to flawlessly for hours.
    The problem is when the headset is connected to the laptop but there is no audio streaming (e.g paused a movie playback for attending some other job) and resume playback after 10-15 minutes the audio starts stuttering/ becomes choppy. If I switch off the headset
    and restart it works fine unless it lays unused for some time.
    Windows recognizes the device correctly. I've turned off power management for BT devices and tried to update the drivers without any positive result.
    Initially I thought the headset was defective but since it works flawlessly with phones I think it is a problem with Windows 8.1.
    How to solve the issue?

    Hi,
    Have you also tried to disable power management on wireless network connection adapter? Since some OEM computers also combine some features of Bluetooth to wireless network connection adapter.
    This issue can be mostly caused by drivers. Please contact the menufacturer's to see if the latest driver is compatible with Windows 8.1.
    If not, I suggest you find the driver for Windows 8 /7 and install it in compatible mode in Windows 8.1 to see what's going on.
    Also, post back the C:\Windows\Inf\setupapi.dev.log and event log you can find in event viewer related to this issue here for our research.
    Kate Li
    TechNet Community Support

  • Problems with Windows 7 home premium and ovi

    Excuse me for my english.
    I've a big problem with Windows 7 and NOKIA N97 32G
    I install the latest version of Nokia Ovi Suite 2.0.2.42. When I connect the phone with USB and select PC suite mode in the phone, OVI don't see the phone and say method not compatible.
    I can't synchronize the phone.
    Help me.
    Thanks

    I just want to say that many Nokia Ovi Suite problems have showed up for me recently. I tried everything (including many reinstalls, cleans, etc.) and nothing helped.
    Finally I found the solution:
    I realized that I have installed Service Pack 1 on Windows 7 (32-bit), and this stopped Ovi Suite from working correctly. The solution is to run Ovi Suite in compatibility mode as "Windows 7"
    (You may be surprised to run an application in "Windows 7" compatibility mode on Windows 7. But after installing Service Pack, it is no longer "Windows 7" but it is now "Windows 7 SP1"! This is different. So "Windows 7" is the old mode without the service pack, and in this old mode Ovi Suite works.)
    Concluding: After installing Service Pack 1 just use compatibility mode as "Windows 7" to run Ovi Suite, and this program should work OK (at least for me it works on a 32-bit OS).
    PS. My version of Ovi Suite is 3.0.0.290

  • Problem with Variable Client Support

    Hello,
    I work with Labview 8.5 and Crio 9014.
    I have a problem with  Variable Client Support. When I try to compile my project I have the following error:
    "The Network Variable Engine and Variable Client Support must be installed on the RT target for this application to function properly..."
    I have read that we have to install the Variable Client Support in Measurement and Automation by right-clicking on the software and then choosing add/remove software but I can't install the appropriate shared variable components because I can't see neither Network Variable Engine and Variable Client Support. So what can I do?
    Can somebody help me?
    Thanks

    I have exactly the same problem. I wanted go through the "Getting Started with the LabVIEW RT module" and when I use wizard for generating new project I get same notification in my VI... 
    The Network Variable Engine and Variable Client Support must be installed on the RT target
    for this application to function properly. If the Network Variable Engine is not supported on
    the target (e.g. FP-2000 with <32MB of RAM), open the project and move the variable library
    to My Computer in the project. Doing this will deploy the variables to localhost but
    will still require that Variable Client Support be installed on the RT target.
    Could someone help please ? 
    Attachments:
    ni.png ‏95 KB

Maybe you are looking for

  • LVOOP Class Mutation

    Hi, I am just starting out with LVOOP.  I've read the main knowledge-base articles, had a small amount of training (on the Advanced Architectures course) and have had a play with my own classes. I now want to use OOP for a test system, so I created a

  • IDOC ABAP enhancements before processing

    Hi Guys! My scenario is that I'm using XI to send a Sales Order IDOC to ERP. I need to make some ABAP enhancements in ERP so that some data is modified before it creates a Sales Order IDOC upon sending from XI. Would anyone have any idea how I can go

  • XFDF and ListItem control

    Hi, I am using XFDF to merge with PDF template, everything works fine with TextBox control. When I came into ListItem control it seems that no matter what I do in XFDF file, it won't affect merged PDF anyway. Anybody has idea does XFDF actually suppo

  • DHCP Failover feature in Windows 2012

    I am planning to configure DHCP on windows 2012 failover (Load balanced)mode.Just want to confirm two things: 1.How will the DCHP address be assigned to clients incase the DHCP Servers loose communication between them. 2.Regarding IP helpers that i n

  • Trying to view Network Activity Reports - login invalid

    I can access and modify anything fine. Shows my password correctly.  Log into Network Defender controls, click on Network Activity Reports, can modify Report and Notifications no problem.... But when I click View Report - and it opens a web browswer,