Webcam Live! is fully installed...but webcam center isnt functioning...??

i have installed the webcam live! software, and the hardware a few times now and every time i do it, restart my computer, and try to open up the webcam center to take a snapshot....webcam center loads...and after like 5 seconds it says something about an error and asks me to send an error report. When i close the error message, webcam center closes automatically and this happens every time...i've done the installation perfectly according to the instructions...it says there is a step when im supposed to click "continue anyway" but i havent had that come up at all. I install the software first, camera disconnected, then when i finish the software, it tells me to connect the cam, i do so, and it completes the installation. Yet, webcam center manages to keep giving me a headache every time i try to open it by freezing up and shutting down. i have a 2006 sony vaio top of the line computer so that shouldnt be the problem XP service pack 2 home edition. can you help please?

Hi anybody with a creative instant webcam just use program Compatibility Wizard in Vista takes about 20 mins to load but runs Fine. Hope this helps Richard

Similar Messages

Fully installed but now stuck.

Hi,
I have just installed the Developer version of ColdFusion 9.0.1 on one web site on IIS7/Vista Ultimate. Initially I had a 404 error but I followed the instructions on http://www.codecurry.com/2009/09/installing-coldfusion-on-iis-7.html, now when I try to access the site on http://127.0.0.12/CFIDE/administrator/index.cfm I get a 500 - Internal Server Error. I have also added the Script Handler Mappings for .cfc and .cfm as recommended on http://forums.iis.net/t/1005992.aspx.
The core of the problem appears to be that on running wsconfig to try to add a ColdFusion Web Server. However, when I run wsconfig I get the response: "Could not connect to and JRun/ColdFusion servers on host 127.0.0.12." when I choose 127.0.0.12 as the JRun Host.
I have looked in the services and I have four ColdFusion services running: ColdFusion 9 .NET Service, ColdFusion 9 Application Server, ColdFusion 9 Search Server and ColdFusion 9 Solr Service. I am assuming that one of these is the ColdFusion 9 server that the "Could not connect" alert message says must be running (in any case there are no services labelled as ColdFusion that are stopped).
I have tried running both with my firewall stopped and with it running but observing the active ports (and none is blocked). In both cases the problem persists.
Now I have run out of ideas except to say that I can connect to http://127.0.0.12/CFIDE/administrator/test.htm perfectly successfully so this is not a folder permissions issue.
This should have no relevance to ColdFusion but I have IIS successfully running with .NET and PHP already. The only impact I can see is that on installing 9.0.1, there was a recommendation to turn off certain windows features in order to take full advantage of the changes but when I looked at changing those settings, as warning message came up that ASP.NET needed them so I left them in place. As it was only a recommendation, I assume that it should still allow ColdFusion to work (if not as efficiently as possible).
Can anyone either guide me or point me towards relevant online information to help me towards a functioning ColdFusion installation because right now it's just dead weight slowing my computer down and I'm keen to get this going?
Many thanks.

Well, first, you probably shouldn't be using 127.0.0.12, which almost certainly doesn't resolve to any host at all. Instead, you should be using 127.0.0.1, which is the default loopback address for your own machine. Or, you can use the name "localhost", which is typically already mapped to that IP address in your hosts file. If you've actually used 127.0.0.12 (rather than making a typo here) that is the most likely cause of your problem.
Second, those instructions from Codecurry are no longer entirely relevant. ColdFusion 9.0.1 does not require that you install IIS 6 Compatibility, although I believe it does still require you to install ISAPI.
Third, you can save yourself a lot of headache by not even hooking CF up to IIS on your development workstation, unless you need to use a specific IIS feature during your CF development. CF includes its own web server, and no connector is required for that. You can configure that post-install using the instructions here:
http://www.adobe.com/support/coldfusion/adv_development/config_builtin_webserver/
During the install, I generally recommend that people choose the built-in web server, then configure IIS or Apache after the install, but it's easy enough to go back and turn this on anyway. By default, CF's web server will listen on port 8500 or 8300 depending on whether you chose standalone or full JRun version.
Finally, the CF services don't really slow your computer down unless you're actually using them. If they're just waiting in the background for requests, they have very little effect. I used to turn my CF services on and off depending on whether I needed them, but frankly it's not worth the effort.
Dave Watts, CTO, Fig Leaf Software
http://www.figleaf.com/
http://training.figleaf.com/

I had MSI Live update 6 installed but removed it do i really need it?

So i had it installed up till today i removed it with my revo uninstaller pro log file as i logged its installed, as its just easier that way and quicker to remove when you trace a install, i removed with the intent to put it back on with the newer version that it prompted me to install, but i did not want to do it that way as the way i installed it was a trace install with revo pro, for easy removal, but i got to thinking do i actually need it, as my board is older a msi Z77A-G45 and so do i need it should i just leave it off?. i don't think i ever used it at all come to think of it, opinions please thanks.

Thats why I prefer to download updates myself. At least I know what exactly I download and that I am not dependant on software

Testflight app not fully installed but won't delete

A year or so ago I worked in app development. One of the apps we worked on wouldn't install properly from Testflight. It just sits on the homescreen as the skeleton app with no image. It doesn't specify it hasn't downloaded, it's not paused, and it won't delete. It doesn't show in the list of applications in Settings, and when I plug into iTunes it doesn't show up in the library.
How do I get rid of an app that appears not to exist?!

Parischic84 wrote:
I am working on
Mac OS X Lion 10.7.4 (11E53), Now it is saying that I have Adobe Illustrator downloaded should I just uninstall the whole creative cloud and try and reinstall it?
Yes.
Uninstall with this tool
http://www.adobe.com/support/contact/cscleanertool.html
then try reinstalling

I have an app that is fully installed but the installing down below wont go away and i want to delete this app how can i do this

How do i get rid of an app that says it is stillinstalling but the bar is full and if i hold it down the little x doesnt come up how to i get rid of it??

No matter how many times you ask this question, the answer is going to be the same.
You can submit feedback to Apple here:
http://www.apple.com/feedback

Creative NX Ultra and Creative WebCam Center.

Hello. Just installed my Creative NX Ultra webcam, and it works good with msn etc, but when I run Creative WebCam Center I get this; "No supported Creative camera detected. Please plug in to continue." I have no idea what to do, I've tried reinstalling the webcam drivers and the webcam center, but it doesn't work. Any suggestions?

Hi JKM,
I don't have the same issues as you do, but wanted to see if we have the same camera or not, maybe help each other out even.. I'm thinking that I bought my camera a couple of years ago, but I only had it hooked up and tried it once. At that time, it seemed like it worked fine, but now the video doesn't look that great and I'm even wondering if it is the right software! I have a seperate headset. But being as I've never turned it on again after that, I've had to reinstall and not 100% sure if there is an upgrade or not for the software. So what version software do you have?
I have version 2.03.01 and it says PC-CAM Center for the NX ultra. I says Instant Live Video chats, but being as I'm not to sure yet how to use it, I am wonderng why it tells me to "save".. I would have thought that if your using it online, why would you save it?
At anyrate.. if you or anyone else should see this, is there a higher version for the software?
AND, I want some advice of what to buy for working online, I need a camera for this. Am I supposed to get a new headset to match?..
I hope someone gets back to me soon, cause I've been advised to buy another brand and I really don't want to, being as Everything else on my computer is set up for sound using Creative labs.
Linda

Creative WebCam center missing

I have just bought creative webcam live pro, and i put in the instalation CD but it does contain the Creative webcam center...
anyone know what to do?
Message Edited by Ragevx on 03-26-2006 05:44 PM
Message Edited by Ragevx on 03-26-2006 05:44 PM

Ragevx,
You can download from the website at Support->Downloads.
Jason

Webcam Center cant detect cam...

I just recently purchased a Live! Cam Voice on saturday. I followed the direction as to installing the device and its software. When i open Webcam Center its telling me that it cannot detect the camera. Ive unistalled the drivers and software numerous times after that to still no avail. The wierd thing is that the camera works on other webcam software such as camfrog. Ive look in the forums for how to resolve this issue, but didnt find any. Please tell me how to solve this before i exchange this to the camera i originally intended to purchase which was the MS Live Cam.

You are not alone, I've bought a Live! Cam Voice two days ago thinking to get top videos and instead I got literally nothing. I've experienced the same problem you have and, in addition to the tests you made, I've also installed the drivers downloaded from Creative website, without any result. The Creative customer support area in the website says that we have right to directly call by phone, for assistance, during 60 days after the purchase, but no telephone number appears so I had to write an e-mail to notify the problem. Have you done the same? I am quite disappointed. Regards

Webcam Instant, Creative Webcam Center issue

im having trouble with my webcam center application. drivers and everything installed just fine and i accessed the Center application once with no problem until i tried to save a captured pic. then it went unresponsi've and now wont start at all. i even tried uninstalling it and reinstalling it but it doesnt work.

JornGP .... Have you tried doing more than taking one snapshot under each user name? I tried going into other users as well. The software started, but as soon as I took a snapshot it locked up. Now under those users it no longer starts up either and locks.
As for Windows Updates, I don't have my PC set for automatic updates - it only updates when I manually check for updates and install. No new updates were installed on my PC during the time this problem started, so that can't be it.

Software WebCam Center

in your autoupdate page of Support, I find new driver.
But where I find also new software for WebCam Center? Or, simply, to reinstall it.
I have WebCam Live! Pro
Windows XP Home, s.p.2
Thank you

Sorry, don't know what else to suggest unless there's a URL to the problem stream that someone here can try. Otherwise we can't test it to try and determine what might be wrong.
BTW, make sure they're testing it with a Mac, not with a Windows system. If they test only with Windows, what they say is or is not working doesn't mean much.
Regards.

Creative Livecam Vista IM - software problem (WebCam Center)

Hello,
I've just had my camera installed with all the software included. There's one problem - every time I open the WebCam Center, the program tries to install something called "Photo Gallery". However, it's impossible to install that, because some errors occur (2908).
The only way to get the WebCam Center work is to cancel the installation, which is possible only just after the WebCam center launches.
How can I get rid off this "Photo gallery" installation thing?
Greetings!
Piotrek
Message Edited by snowdawg on 12-25-2007 05:32 AM

Sephiroth,
Can you click on the details for the error report and post up what it says. If it reports something about Apple causing the problem then you could try updating your QuickTime to the latest version.
Jason

HP Officejet 4500 driver not installing HP Solution Center fully-so can't scan

New laptop w/ Windows 8....Have installed the right driver...but the driver isn't downloading the HP Solution Center suite, so I can't instruct the HP Officejet 4500 to scan. Printer is communicating w/ laptop. I don't use the online fax options, but am sure they wouldn't work either.
How do I get the driver to fully install the HP solution center so I can instruct the device to scan????

CD didn't work. Download software, didn't work when it came to plugging into usb port, don't even get a BACK button, nothing. Printer not recognized by laptop. Did all the solutions/uninstall/install etc. Printer is working though, prints out the exact same thing each time I press the green button on the printer, but is not connected to laptop. So it's not the printer, it works.
Now what?

Creative webcam center

i need help i cant get in to the webcam center to take pictures and i dont know what to do or how to fix it, please help!!!!!!!!!!!!!!!!!!!!!!!!!!:womansad:

it is quite easy. start/all programs/creative/creative live cam otherwise you have to search in your explorer on creative have fun

Problems with webcam center

Hi
I bought webcam instant yesterday,i downloaded the newest drivers for it...
But it doesn't work.
Everytime i start webcam center the camera turns off...
I tried it with msn messenger...but it worked perfectly...
HELP!!!!

...the version is .0.02.0729
just try google.....
but i'm still searching for the solution of the problem with webcam center!!!!

Alternative to Webcam Center

I've seen about 5 threads with people asking where to download Webcam Center, none of which has been answered, except for one person claiming that Creative charges 5 for a replacement CD. Well no way in hell am I paying anything for the software that I need to use my webcam (which Logitech lets you download for free for their cams). Since obviously Creative doesn't care much about their PAYING customers it looks like we just have to resort to NOT BUYING CREATIVE PRODUCTS or using 3rd party Webcam software. That is if it exists... Does anyone out there know of any freeware webcam software I can use for recording videos and taking pictures? Thanks guys!
-wil

you WANT users to sync it from THEIR DESKTOPS... if you WERE to run it through the SERVER, all synchronizations would occur using the servers' OneDrive account (well, whatever account you'd configure the server to use)... when using it from the desktop,
all changes occur using the INDIVIDUAL'S account.
Also, OneDrive is not a BACKGROUND / SYSTEM SERVICE... it is an APPLICATION... so it ONLY runs when you are LOGGED IN.
As far as sync and SP... there are some file names that simply aren't allowed... & is a COMMON issue, but it's NOT VALID in files, since it's a special character in website addresses.
Here's the big thing in my opinion, though... how much do you REALLY need ALL of the files to be sync'ed to EACH USER's desktop?
Scott Brickey
MCTS, MCPD, MCITP
www.sbrickey.com
Strategic Data Systems - for all your SharePoint needs

Webcam Live! is fully installed...but webcam center isnt functioning...??

Similar Messages

Maybe you are looking for