WebEngine and File URL

I cannot get a File URL to work in WebEngine.
Is there something I need to do to have it recognize File URL's?
My plan is to have HTML files on the disk that have built in javascript that do the work but call other HTML files and images and what not.
Julian

It would be helpful if you could provide us with an example of your code between \\ tags and give us more info.
Are any exceptions thrown? Are you running your program as an applet or WebStart application? If so, then are your jar files signed? If you are using WebStart, are these tags inside of your jnlp file?:
<security>
<all-permissions/>
</security>

Similar Messages

Error opening file/URL reference by alias and Administrative limit exceeded

Hello All,
Problem:
SMTP Error: 4.5.0 error opening file/URL reference by alias
and
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
Here is my configuration:
Windows 2000 server (without Active Directory)
SP4
Iplanet Messaging Server 5.2
Netscape Directory Server 4.16
IPlanet Messaging Server 5.2 Hotfix 1.09 (built Jan 7 2003)
We have a group which we use to flash messages to all the users of the mail server. Till last week it was working fine but now I am not able to send messages to this group <group-name>.
There are around 800 (Eight Hundred) E-mail id the messaging server and the flashed message is supposed to go to all 800 + users.
Note: I have another group of 300 users and I am able to send an E-mail to this group of 300 users.
I am using Dynamic Group for Members list.
The error message I get while trying to send message to this group is
SMTP Error: 4.5.0 error opening file/URL reference by alias.
The corresponding error in mail.log file is
30-Jan-2004 10:55:21.40 41c.7e4.1098 tcp_intranet J 0 <group-name>@domain rfc822; <group-name>@domain domain (localhost [127.0.0.1]) 452 4.5.0 error opening file/URL referenced by alias: <group-name>@domain
Now when I construct and Test the LDAP URL from Console, the error I get is:
Search failed with: netscape.ldap.LDAPException: error result (11); Administrative limit exceeded
I have increased the various limits but I still get the same error when I send mail to that group or do a LDAP Test:
The deafult and new limits are:
Sizelimit: Default 2000 New 10000
Timelimit Default 3600 New 3600
Lookthroughlimit Default 5000 New 6000
The corresponding error entry in access log of slapd is:
30/Jan/2004:12:19:26 +051800] conn=34 op=213 RESULT err=11 tag=101 nentries=0 etime=2 notes=U
My search for Administrative limit problem and error opening file/URL error in Sun forum and other groups did get some hits but that did not solve my problem.
I will appreciate any suggestion/comments.
Thanks and Regards,
Maneesh Bisht

Thanks Jay.
My problem has been fixed.
Your suggestion was to increase the lookthrough limit. As you would have noticed in my posting that I had increased this limit to 6000 but that did not solve my problem. Today I increased this limit to 10000. And after that I did not get "administrative limit exceeded" error. Also I do not get "error opening file/URL reference by alias" error while sending E-mail to a particular group of 800+ ids.
Regards,
Maneesh Bisht

I need to select and upload a image and corresponding url from an external website using file upload control in MVC4. Please help

I need to select and upload a image and corresponding url from an external website using file upload control in MVC4.
Please help
Latheesh K Contact No:+91-9747369936

This forum supports .NET Framework setup.
As your issue appears to have nothing to do with .NET Framework setup, please ask in the MVC forums for best support.
http://forums.asp.net/1146.aspx/1?MVC

Using unix to try and get url file from c++

Hi,
Can I use unix to try and get a url file and read it from c++??
eg given a url and filename , can I read it, from c++???

The various unix standards do not, as far as I know, provide any URL resolution APIs. You can of course build your own, using sockets and file io, but you would have to build your own protocol stacks for http, https, ftp, etc. This is a pretty big challenge.
A better approach is to use an existing third party library that has already implemented these bindings. cURL is one such library, and has API definitions for many languages, including C++:
http://curl.haxx.se/libcurl
It is released under a very generous license, so you should be able to use it in almost any context. You will need to either download and compile the sources, or get prebuilt binaries somewhere.

Url and File Encoding

I have the following scenario:
I have a directory which has directory names and filenames encoded in what I believe is utf-8 (the content is html). The files are derivates of DMOZ/World so they are in various languages. I can see accent marks and cryllic/greek, etc in the windows file explorer.
I need to zip this directory up (using java) and then upload it to a server and then unzip it using php. I am uncertain what encoding the server is using.
Do I UTF-8 Urlencode the file names and file paths and then zip and upload?
If so then do I need to also urlencode the links within the html?
thanks

It's not a bug, it's a lack of a feature.
The design of the Zip format requires a filename to be stored as bytes in the archive, but doesn't specify what encoding should be used to do that. Back in the days when the format was invented, that didn't matter because you could only use ASCII characters in filenames anyway.
Then when Unicode started infiltrating file systems, there was nobody powerful enough to fix the format by specifying an encoding, and the big players in the archiving field didn't care because the way they did it was de facto correct anyway as far as they were concerned.
I don't know how Microsoft and WinZip encode their filenames these days, but at any rate Java's zip classes don't even provide the option to specify an encoding. I am pretty sure that several bug reports have been filed in regard to this missing feature but I don't believe anything has been done yet.

Can links from InDesign or InCopy Articles use non-file: URLs?

I am trying to determine if InDesign CS6 or newer provides any way for links to be to URLs that are not file: URLs. For example, I am using a CMS that provides HTTP access to images. I would like to do something like:
        <Link
          Self="uf3"
          AssetURL="$ID/"
          AssetID="$ID/"
          LinkResourceURI="htp://myrepository.com/resource/binary/myimage.jpg"
       />
My experiments suggest that this will not work but I'm hoping I've overlooked something.
Another wrinkle is authentication: for access to the CMS the URLs need to be authenticated, which means InDesign would need to get then authentication information on at least first resolution.
Is there a way to do this out of the box? If not, what would be required in terms of plugin implementation or library deployment to enable it? Back in CS3 days we were able to use some unsupported libraries to get URL resolution working but it would be nice if it worked out of the box.
Thanks,
Eliot

As far as I know there is nothing new in CS5 (or CS4 for that matter) regarding which styles are retained when exporting frames to InCopy. If you're exporting an individual story (text frame) from ID to IC, the only styles in that ICML file will be the ones used by the text in the story. If there's no text in the story -- you're exporting an empty frame -- then the ICML file won't have any styles.
It's been this way as long as I can remember.
What you need to do in InDesign is keep some fake text in the text frame to which you've applied the styles you want the InCopy users to use. Export that, then in InCopy, open it up, delete the text, and the styles will remain. Now you can save it as an actual InCopy template file (ICTD? something like that) from the Save As menu, and when IC users open it, it'll create an untitled, empty copy of the starter InCopy document with all the styles.
In a non-Woodwing workflow, InCopy users open the actual INDD file and so have access to all the styles, even if the story frame they want to work on in that layout is initially empty. Or, they can import (Load) all the styles from an InDesign doc into their standalone InCopy file from the InCopy Paragraph Style panel menu (Load All Styles).Not sure if you can do the latter w/Woodwing.
I was pretty sure that Woodwing had a different way of creating InCopy templates, something like InCopy article templates? Not sure.
AM

Reading file from a folder : File dir = new File(URL+aFile_to_add);

Hi,
Trying to read files from a dir on my site using a JSP and bean. I've tried nearly every option for the filepath I can think of and it doesn't seem to be finding the file...
Here's the bit:
String URL = "images\\wedding_photos\\";
File dir = new File(URL+aFile_to_add);
String[] files = dir.list();
It's working locally, but I obviously had to change the path from c://... to the above.
The full code is listed below in the addWedding Method
The method removes the .jpg from the file name and then writes the new file name to a database
Thanks for any insight.
Regards
Jim
public String addWedding(String aFile_to_add)
String feedback = "unset in scrubWedding";
try
String URL = "images\\wedding_photos\\";
Class.forName("org.gjt.mm.mysql.Driver");
java.sql.Connection connection = java.sql.DriverManager.getConnection("jdbc:mysql://localhost/rhwedd2_shop?user=**********&password=*******");
java.sql.Statement statement = connection.createStatement();
File dir = new File(URL+aFile_to_add);
String[] files = dir.list();
if (files == null)
feedback = "Sorry, couldn't find the file "+aFile_to_add+"...no files have been added.";
else
for (int i=0; i<files.length; i++)
// Get filename of file or directory
String filename = files;
String no_extension;
//convert string array element into a char array
char [] charsfilename = filename.toCharArray();
int newlength = charsfilename.length -4;
no_extension = String.valueOf(charsfilename,0,newlength);
filesAdded = filesAdded+", "+no_extension;
// Show the new file names in stack trace without extension
//System.out.println("String no_extension " + no_extension );
statement.executeUpdate("INSERT INTO items VALUES ('"+no_extension+"',5,'"+aFile_to_add+"')");
// write to table with item_id and weddingid
feedback = "The following files have been added..."+filesAdded;
if (statement != null )
statement.close();
if ( connection != null )
connection.close();
catch(Exception e)
feedback = "Into the catch";
e.printStackTrace(System.err) ;
return feedback;
}//end addWedding

String URL = "images\\wedding_photos\\";
File dir = new File(URL+aFile_to_add); ok, ok, I'll answer...
1) What gives you the impression that the relative directory "images\\..." exists (or, in other words, what makes you think your current directory is the parent of "images"?

Creating a service ; What needs to be added to tnsnames.ora and JDBC url?

DB version: 11.2.0.2
OS platform : Solaris 10
We have a 2 node RAC.
DB name   = mbsprd
Instance1 = mbsprd1
Instance2 = mbsprd2I want Instance 1 (mbsprd1) to be used for our OLTP application and Instance 2 (mbsprd2) to be used for another application of DSS nature.
Based on the syntax
srvctl add service -d <dbname> -s <ServiceName> -r <Preferred Instance> -a <Available Instance>I am going to create 2 services
-- Creating a service called OLTP
srvctl add service -d mbsprd -s OLTP -r mbsprd1 -a mbsprd2-- Creating a service called DSS
srvctl add service -d mbsprd -s DSS -r mbsprd2 -a mbsprd1-- Starting the services
srvctl start service -d mbsprd -s OLTP
srvctl start service -d mbsprd -s DSSI guess the above steps are enough to configure a service at the server side.
I would like to know what needs to be done at the client side.
Currently the tnsnames.ora file and JDBC url used by our clients are shown below. What needs to be added to tnsnames.ora file and jdbc URL to start using services configured above?
-- SCAN based TNS entry
mbsprd =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (COMMUNITY = tcp.world)
        (PROTOCOL = TCP)(Host = p148149-scan.tpam.net) (Port = 36964))
    (CONNECT_DATA =
      (SERVER       = DEDICATED)
      (SERVICE_NAME = mbsprd)
      (FAILOVER_MODE=(TYPE=SELECT)(METHOD=BASIC))
-- TNS entry based on local listener
-- Instance 1
mbsprd1 =
(DESCRIPTION =
   (ADDRESS_LIST =
   (ADDRESS =(PROTOCOL = TCP)(HOST = hsolarp148-vip)(PORT = 36973))
   (CONNECT_DATA =
         (SERVICE_NAME = mbsprd)
         (INSTANCE_NAME = mbsprd1)
-- Instance 2
-- TNS entry based on local listener
mbsprd2 =
(DESCRIPTION =
   (ADDRESS_LIST =
   (ADDRESS =(PROTOCOL = TCP)(HOST = hsolarp149-vip)(PORT = 36973))
   (CONNECT_DATA =
         (SERVICE_NAME = mbsprd)
         (INSTANCE_NAME = mbsprd2)
)JDBC entry for RAC
jdbc:oracle:thin:@p148149-scan.tpam.net:36964:mbsprd -- Alternative version used by some clients because the above had 'some issues'
jdbc:oracle:thin:@(DESCRIPTION=(LOAD_BALANCE=on)(ADDRESS=(PROTOCOL=TCP)(HOST=p148149-scan.tpam.net) (PORT=36964))(CONNECT_DATA=(SERVER=DEDICATED)(SERVICE_NAME=mbsprd)(FAILOVER_MODE =(TYPE = SELECT)(METHOD = BASIC)(RETRIES = 180)(DELAY = 10))))

OLTP =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = p148149-scan.tpam.net)(PORT = your_port_number))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = OLTP)
DSS =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = p148149-scan.tpam.net)(PORT = your_port_number))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = DSS)
)JDBC entry for RAC
jdbc:oracle:thin:@p148149-scan.tpam.net:36964:service_name
jdbc:oracle:thin:@new_tns_entry_description(if you would like to connect the database with particular service)
try this and let us know any issues,

Could not load file/URL (file not found) error for JNLP file

I am completely baffled in trying to figure out why I am getting the following error for some JNLP files but not others:
Error: could not load file/URL specified: C:\Users\tom\AppData\Local\Temp\javaws2
java.io.FileNotFoundException: C:\Users\tom\AppData\Local\Temp\javaws2 (The system cannot find the file specified)
at java.io.FileInputStream.open(Native Method)
at java.io.FileInputStream.<init>(Unknown Source)
at java.io.FileInputStream.<init>(Unknown Source)
at com.sun.javaws.jnl.LaunchDescFactory.buildDescriptor(Unknown Source)
at com.sun.javaws.Main.launchApp(Unknown Source)
at com.sun.javaws.Main.continueInSecureThread(Unknown Source)
at com.sun.javaws.Main$1.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)I have Googled around this forum and elsewhere, and have seen reports that this error is IE-specific, and seems to have something to do with no-cache headers being sent, or with the client browser's cache being full or turned off (which is not my case). I saw the information in the JavaWS FAQ, which recommended turning off security constraints for the JNLP's URI. I tried that, and it didn't help. One of the very baffling things is that I have created several variations of the JNLP file, with varying combinations of jars and property resources, and some combinations always work while other combinations never work. Here's an example:
<jnlp spec="1.0+" codebase="$$codebase">
   <information>
      <title>demo app</title>
      <description>illustrates weird bug</description>
   </information>
   <resources>
      <j2se version="1.5+"/>
      <jar href="randomFile.jar"/>
      <property name="xxx" value="xxxx"/>
      <property name="swing.metalTheme" value="steel"/>
   </resources>
</jnlp>The above file always fails with the error shown at the top of this message. However, if I remove either of the two properties, it works fine. And I have created other variations with lots of properties, some of which work. All of these variations are in the same directory in the war file, served by the exact same servlet (a slightly modified version of the jnlp.sample.servlet.JnlpDownloadServlet provided with JDK 1.6.0_3). Assuming that a no-cache header is the problem, what on earth could be causing some JNLP files to always be served with a no-cache header, while others are never served with a no-cache header?
On a related note, any recommended debugging techniques for seeing what headers are being transmitted? I tried adding a simple check for a "debug=true" parameter in the servlet that causes it to set the content type to "text/plain" instead of JNLP, and that allows me to see (rather than execute) the JNLP XML that's being returned, but it doesn't show me the HTTP headers that are being sent back. If any caching headers are being set, I think it must be being set by the servlet container itself, as it's nothing being set in the servlet code that I can see. So I don't see any way on the server side Java code to output or log the actual HTTP response (or is there?). Any tips in that regard much appreciated.
Edited by: TomC125468 on Aug 19, 2009 1:35 PM

Hi Luca-Sanna,
Thanks for the response. Re browsers, yes, it fails in IE but it succeeds in Firefox. The info on the JavaWS FAQ and other places all seem to indicate that it's an IE issue concerning handling of the cache-control headers.
I should check in my webserver forum (Sun WebServer 7) to see about logging options. Sniffing on the client side is not possible, as my app is required to use HTTPS exclusively, and unfortunately that also precludes a telnet GET request.

Help needed in getting file url

Hi,
I work in a project where i need to get the url of the specified file. The code for that is as,
URL fileURL = Thread.currentThread().getContextClassLoader().getResource();
The required resource is available in the concerned path. But the file url returns null
Can you please help in solving the problem.
Thanks and Regards,
Mclaren

Where (text area, label, button) do you want it to do it.
What do you want it do (browse within the local text area, open the default browser...)
Text area, use above, JButton (or alike) and open default browser, use ActionListener and JDIC.

I want to create an external video widget with iAd. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.

i want to create an external video widget with iAd to use in an iBook. I followed the steps and copied the Url and paste it in the Video pop-up menu in the Properties section of the inspector. When i select 'preview' the video doesn't play and the Url that i pasted is gone.
hope someone can help!

May have something to do with whether or not the URL can be reached while building your widget. I've got a video on the web. When I enter the URL into the field for the video object and click to another field, the URL is replaced with some text indicating that it is accessing the video then updates itself to displaying just the name of the video file.
It shows just fine in preview and I can see the full path to the video when I export the widget so it should work for you.
Is the video accessible from your Mac while you're laying out your widget?
-Mark

Problem with file:/// URLs in Safari 2

I am seeing some confusing behaviour with file:/// URLs: a very simple HTML file with that type of link works as expected (opens the nominated folder) when loading it as a local file from my disk, but when I put it on our web server and retrieve it from there, nothing happens when I click on the file:/// link.
This is happening under Safari 2.0 on OS X 10.4.2 (cross-tested on a brand-new iMac), but by comparison does not happen under Safari 1.2.4 under OS X 10.3.8 on an old eMac.
The HTML source as viewed in the browser when loading it each way is identical:
Go here: link
Has anyone else seen -- and hopefully resolved -- this?
Thanks,
Robert

I tried clicking on the link and nothing whatsoever happened. So I tried a control click and selected "Open Link in new window" and a new window opened, followed by the Utilities folder opening. I made a test.html file with the link in it, put it on my startup drive and it worked as expected, and ditto for putting it on a second internal drive. I then put it on my iDisk and navigated to it thru its web site address of
http://homepage.mac.com/francines/testlinks.html
and discovered that the two other "local" operation links (to launch ScriptEditor) both worked, but the open folder link no longer did, except by using control click and choosing either "Open link in new window" or new tab. A new Safari window or tab opens, then the Utilities folder opens.
I then tried the page in Firefox, and it didn't work AT ALL, not even with new window or tab. I then tried Mozilla and Netscape. Same deal. The ancient Internet Explorer opened the Utilities folder inside a new browser window rather than the Finder. This might be a clue as to why the link doesn't work as expected, but unfortunately I don't know what it means.
Francine

File file = new File(URL) - no can do on 1.3?????

I'm using java v1.3 and when I try to use the constructer File file = new File(URL) I get this error :
C:\myservlets\TestServlet.java:26: cannot resolve symbol
symbol : constructor File (java.net.URL)
location: class java.io.File
file = new File(path);
I have looked at the File Class API and there is such a constructer, is it because I am using v1.3, how can I get pass this without installing v1.4?

I have looked at the File Class API and there is such
a constructer, is it because I am using v1.3, how can
I get pass this without installing v1.4?The File(java.net.URL) constructor is not available in 1.3, only in 1.4+...
Why not use the File (String pathname) constructor?
bbm1277

SRFC-adapter and file adapter with error: no adapter found

Hello,
we have two scenarios here in an XI 3.0 SP12:
First scenario connects two R/3 systems via RFC adapter (outbound / inbound) for an RFC in a standard R/3 function module SUSR_ZBV_GET_REMOTE_PROFILES.
The RFC is synchronous.
Second scenario uses file adapter to send file from A to B.
When starting the RFC call from the sender system the error message in area "call adapter" for XML message in the trace is "exception while reading from SLD:Property sap_xiadapterservice.adapterType does not exist".
Message in RWB:
"Transmitting the message using connection http://abc038.ceu.test.com:8077/sap/xi/engine?type=entry failed, due to: XIServer:AE_DETAILS_GET_ERROR:Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines."
Same problem for file adapter!
Here is the message from the file adapter error log entry in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.kx1.test038</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.kx1.test038</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Looks like an identical problem for both adapter.
What we have done (checked) so far:
- SLD connection is working
- Vis.Admin.: no problems found
(SAP RFC adapter active, file adapter active)
- Component monitoring: no errors, adapters are fine
- all rfc connections checked: ok
- have checked user and pwd and replaced to be sure
- cache refresh: ok
- reimport of SWCV to IR for RFC: done, no result
Does anybody have an idea, how to get rid of that?
Best regards
Dirk

Hello Udo,
in Adapter monitoring all adapters are listed and per adapter (here RFC and FILE) all adapter entries from the scenarios are available (sender / receiver comm. channel entries - in green)!
Pipeline URL in SLD Bus. Syst. is fine ( and an IDOC adapter scenario is running successfully) !
I think this is a really tricky one!
Best regards
Dirk

Get site collection url, site url and list url from a full uri?

If I have incoming: only URI's of the format http://a.b.c/d/e/f/g/h/i/j/k/l/m/n/o/p.docx
(And these are coming from multiple farms and multiple site collections) (and i have a web api on some remote server) (and have all the authentication details)
And I want to query just the single the item via csom : check one column and if value="yes" then download the doc:
a. how do i get the absolute site url out of it for " clientcontext ctx = new clientcontext(THISURL) "
b. how do i then get the list uri out of it to push a caml query to to then retrieve it
I could :
a. strip off the filename, that is the easy part :)
b. I could paste "/_api/contextinfo" behind it and POST it first as a httprequest. Then first get the site and web url and later on
find a way to find the list url (which is probably the first item behind the fullWebUrl), but it seems weird to mix this in the mix
Basically im looking for something that tells me what is what in http://a.b.c/d/e/f/g/h/i/j/k/l/m/n/o/p.docx

Sorry, GetList is only available in the O365 version of Microsoft.SharePoint.Client. If you could test for a root site collection and if there is not one then take the scheme ... + Uri.segments[0] and then get the context. After that you can use
the GetFileByServerRelativeUrl. The following demonstrates this.
public static void GetFileList()
string fileUrl = "http://basesmc15/teamonesubone/teamsubonesubone/Shared%20Documents/folderholder/newauthor6.pdf";
Uri fileUri = new Uri(fileUrl);
Uri webUrl;
ClientContext rootContext = new ClientContext(fileUri.Scheme + Uri.SchemeDelimiter + fileUri.Host);
webUrl = Web.WebUrlFromPageUrlDirect(rootContext, fileUri);
ClientContext subContext = new ClientContext(webUrl.ToString());
File file = subContext.Web.GetFileByServerRelativeUrl(fileUri.AbsolutePath);
List list = file.ListItemAllFields.ParentList;
subContext.Load(list);
subContext.ExecuteQuery();
Blog | SharePoint Field Notes Dev Tools |
SPFastDeploy | SPRemoteAPIExplorer

WebEngine and File URL

Similar Messages

Maybe you are looking for