Webi Formula with reference to the header values

Hi,
I need to create a cross tab table that the values in one of the columns are formula based.
My problem is that the formula has to use the value of the first cross tab header column.
Here is an example of the Structure of this table?
Version       # Customer calls
6.12             ==[# Customer calls]Where(([All Current Customer calls].[version]=????)
7.45             ==[# Customer calls]Where(([All Current Customer calls].[version]=????)
4.55             ==[# Customer calls]Where(([All Current Customer calls].[version]=????)
Best Regards,
DoronS

Hello Mahee
Please observe that your system is working as designed. Planned orders are scheduled independently, even when they are part of a network/collective order. Note 152319 explains the planned order scheduling in detail and it provides the following information:
* No scheduling of overall networks is executed although a directly manufactured component is assigned.
Note that no scheduling of the overall network is executed for planned orders. For the components requirements dates are determined. In order to cover them, planned orders are created in the next MRP run. Since the requirements are not managed using the exact time, the results of the planned order scheduling and of a scheduling of the overall network of the converted collective order can differ.
BR
Caetano

Similar Messages

How can i make a Web application with listboxes as the column value

Hi,
I have two tables,one is employeees the other is devices.(Devices is the table for department notebooks).I want to implement an applicatiion for employees in order for them to book department laptops,so everyone will know which devices are in use and book the vacant notebooks.I want to make a view,such that it has a names column with static employee names and a devices column with list boxes for every employees such that they can select pre-registered notebook labels.
Thanks for your help.
Best regards,
Edited by: ebaris on 13.Eki.2008 12:50

Hi,hello, excuse the delay, the way is the following, I assume you have Application Express.
In any page of your application click on List of Values.
Click-on to create.
Name-list: LOV_NAME.
Select-type dynamics.
With the generator creates the SQL queries.
Click on creating Values list.
Select the item you want to convert into a selection list (ComboBox).
In the Show-like property, click on the Selection List.
Click on the link LOV, select the list of values created.
Apply changes.
Roberto.

How to bring the Header value to the row ?

Dear All,
I am a starter in learning SDK. have developed a form having 2 tables a header and a row detailed one.
Now i need to update a field in all the row with a header value when the header value is added. it should be like the SE name getting updated when the SE name is selected in header level in std doc.
how to arrive it?
kindly help me to achieve this.
Thanks,
Sam.

Dear Gordon,
May the customer enters a value to the header which they want it to be unique value for all the row detail.
If there exists more than 50 rows they cant enter it for each and every row, for in case if the value needed to be changed for a particular row or for particular few rows they will change it manually to that row alone.
I just want to achieve this scenario in my form.
Do you know how to bring in ?
As this is being a normal functionality in Std forms.
Thank you...

Error : Sales order 'create with Reference' to the contract

We have made a value contract. Now we are trying to make a Sales order 'create with Reference' to the contract.
when we do that, we am getting error 'copying material in any value contract item is not permitted'
Any help or directions would be greatly appreciated . We are on Ecc 6.0
Rohit

As of now my value contract has just one material. so i dont need assortment module settings. right?
in VTAA settings are as follows
Target type: OR
Source type: ZK1
there is only on item category
Target item category: TAN
Source item category: WKN
Copying requirement : 301
update doc flow : 2
pricing type : C
cont item copy mode : A
DataT am using 151,102,002
There are no schedule line.
Rohit
Edited by: rohit kumar on May 15, 2008 7:36 PM

Sales order with reference to the invoice

How can we create a sales order with reference to the invoice

Hi,
1. Create sales order
This process step can be triggered as follows:
The customer accepts the quotation and places an order.
You create a sales order with reference to a quotation. For more information, see Structure link processing Quotations. The system copies the items from the quotation.
You create a sales order. This is also possible without performing the previous steps.
2. Enter products
You enter products requested by customers.
Note
If necessary, you can configure products again for every item of the sales order. You can find more information in the business scenario variant Structure linkQuotation and Order Management (Configure-to-Order) and under Structure linkProduct Configuration in the Sales Transaction.
3. Check availability, schedule order and create requirements
The system triggers an availability check and scheduling in SAP APO for every order item in SAP CRM. The confirmed quantities and dates are confirmed by SAP APO to SAP CRM, and saved in the sales order (see Structure linkAvailability Check in the Sales Order). At the same time, a customer requirement is created in SAP APO.
Note
You can also execute the availability check in SAP R/3. You can find more information under Structure linkAvailability Check with SAP R/3.
4. Maintain and determine conditions
The system determines the prices and the value of individual items. If necessary, you can process these. For more information, see Structure linkPricing.
5. Perform credit check
SAP R/3 executes a credit check based on the results of pricing in SAP CRM. The result of the credit check is confirmed in SAP CRM, and saved as the credit status at item level. For more information, see Structure linkAutomatic Credit Check.
6. System replicates sales order
After the sales order has been saved in SAP CRM, complete and without errors, it is replicated for logistics processing in SAP R/3. Order data is transferred together with confirmed scheduling lines to SAP R/3.
7. System receives sales order
After replication to SAP R/3, you can change the sales order in SAP CRM and SAP R/3. You can find more information on this under Structure linkData Exchange for Sales Transactions: CRM Enterprise - SAP R/3
8. Send order confirmation to customer
You can send the order confirmation either electronically, or in print to the customer. You can find more information under Structure linkSales Order Confirmation by E-Mail.
9. Monitor status of order
PS: Do award points

Debit memo request with reference to the credit memo request

Dear SD Consultants,
I have a business scenario in which I create a credit memo request with reference to a debit memo request but the problem is that ,i can create many debit memo requests with reference to the same credit memo request even if the all target quantity was referenced , I still can create many debit memo requests with reference to the credit memo request so can any one tell me how to restrict creating debit memo request with reference to the credit memo request up till the all target quantity was referenced.
Regards,
SD Consultant

Dear Saju.S,
I have checked all the positive/negative values in the item copy control but none of the values works as i still can create many debit memo requests with reference to the credit memo request.
Regards,
Sd Consultant

Creation of Billing with reference to the Sales Order

Dear Friends,
I need your suggestion for the following scenario.
Client wants to create the Billing Document with reference to the Sales order.I mean when he is entering sales Order while creating the billing document ,the system should generate the billing document only for the delivered quantity.
e.g sales order is created for 100 Tons.And there are 5 delivery documents for 50 Tons.(Still the Sales order is open).
Now when billing document is created with reference to the sales order ( Not with reference to the Delivery Document) it should create the billing document only for these five deliveries.
Is it possible? If yes,how?
Thanks in advance.
Regards,
Shrikant

Hi Murali,
Currently client has software where he enters only Sales Order no and their software creates the billing for the delivery document for this Sales Order.
Here client does not want to enter multiple delivery document nos if any.He wants to enter only Sales Order no.
Regards,
Shrikant

Invoice VF01 with reference to the sales order

Dear Experts,
Our business requirement is to book the invoice with reference to the sales order without posting delivery and PGI. Provide me the step by step process to complete this configuration.
Is that suggestible to change the existing document type which the business is using by creating delivery PGI and Invoice to the document type where invoice booking with reference to sales order or I have to go with the new document type only.
With Regards
Uday
Message was edited by: G Lakshmipathi
Please dont add such text in your post which is not encouraged in SCN.

TW Typewriter
can you help, by creating the entire process in Sandbox and informing uday about the configuration steps?
At the outset, please refrain posting like this which, being a senior member of SCN, you should be aware of rules where spoon feeding is definitely not encouraged. Those sort of efforts have to be taken by OP. This forum is only to guide the people wherever they get stucked.
cc: Phanikumar V
You should also be knowing the forum rules and I thought, you would have expressed like what I said above.
G. Lakshmipathi

TO CREATE AN INVOICE WITH REFERENCE TO THE SALES ORDER

I have a credit memo request(sales order) and I need to create a credit memo(invoice) on saving the sales order without creating the delivery order in between.The invoice(credit memo) must be created directly with "reference" to the sales order(credit memo request) without the delivery order in between

Hi,
You can deliver the standard sales order by VA02 going to sales document-> deliver.
then save it it will give you outbound delivery number then go to vl02n the do the PGI of the same.
and for Invoices first create billing document byVF01 then create invoice list VF21
Thanks
Ankur
Edited by: Ankur Sharma on Jul 23, 2008 7:51 AM

Posting a Credit Memo with Reference to the Invoice

Dear all,
I'd like to post a Credit Memo with Reference to the Invoice but in transaction FB65 or I can't find field to input Reference to the Invoice
Please tell me where I can Reference to the Invoice
Thank in advance
Minh

Dear all,
When I create a a Credit Memo (Transaction FB65),
On the Payment tab page in the Enter Vendor Credit Memo,the system doesn't display field Invoice Reference to input Invoice document number of an invoice reference exists.
Please tell me how to configure to display field Invoice Reference
Thank in advance
Minh

Return order with reference to the Billing Document

Hi All,
This is with reference to issue that when I create a Return order with reference to the Billing document
I had one line item in the billing document say xxx of quantity 4 I had done the setting in the
system messages V4 229 to convert the warning to error messages for billing quanity to order quanity
If I enter in the first line item 8 insted of 4 system will throw a error but the issue is the same item xxx of qty 4 is entered in the second line item and system allows to save the return order how to stop this
Please give the valuable feedback.

Dear Friend
Welcome to SDN
Return order is itself a challenge to SAP standard settings
There are some scenarios
1. Return order qty should not be increasesd say Billed qty of material X is 20 units
While returning Material X should be a maximum of 20 units
If made 21 it should throw error T code OVAH message class V4 message no 299 convert from warning to error thro customization
2.Return order should be created only once referencing billing doc
To control that T code SE91 message class V1 message no 499 convert from warning to error thro ABAP help
3 Your issue is same like case 1 but the material X is entered as second line item in the return order with some qty
This case system is not throwing even a warning
Yes correct
This is to be handled with userexit
Discuss the same with ABAPer
Check these threads on return issues which is of different scenario than of yours
Forum post in ERP - Sales and Distribution (SD) General: Order Qty.
Order Qty.
Forum post in ERP - Sales and Distribution (SD) General: Return order
Return order
Regards
Raja

When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accur

When I open a file it normally opens in 12.5% stated on the header. For some reason, it now opens with 100+% on the header and is much smaller in size. How do I go back to the first option I noted? I use AP to work on blueprints for measuring so the accuracy matters. Any direction would be greatly appreciated. Thank you.

Are the image all the same size the % files open into a document seems to vary with the number of pixels the image being opened has. Check the Image size.

WD4A with ALV, populating the header with values from the table

I have WDA application that list schedule agreement headers in one ALV and when you select one the line items show in the second ALV2 below. We show quantity and net value in 13 monthly buckets beginning with the validity data. The function returns the month text in columns I want to change the header based on the months returned. So instead of QNTY1, QNTY2 it would be 01/2008, 01/2008 etc. But ALV2 is initialized when the page is built and if I change the ALV2 settings after the line item function call they are not updated. On the page. Is there anyway I can do this???
It tried put the code in the EXECUTE function method, and I tried WDMODIFYVIEW but the ALV is not refreshed.
Thanks
David

Thanks for your help, I know I am probably doing something dumb but it is driving me crazy.
I have debugged I can see the text change in the debugger but it doesn't show up on the screen. I removed the code from from the WDDOINIT. So am doing everything in the ONACTIONGETDETAIL to ensure that it is not being overwritten. I can change the 'number of lines', remove print button, change a field to an icon etc, but the column header doesn't change. If I put the same code in the WDDOINIT the column header does change. Everything else works in both places.
*First ALV config
    l_ref_cmp_usage =   wd_this->wd_cpuse_alv( ).
    IF l_ref_cmp_usage->has_active_component( ) IS INITIAL.
      l_ref_cmp_usage->create_component( ).
    ENDIF.
    DATA lo_interfacecontroller TYPE REF TO iwci_salv_wd_table.
    lo_interfacecontroller = wd_this->wd_cpifc_alv( ).
    DATA lo_value TYPE REF TO cl_salv_wd_config_table.
    lo_value = lo_interfacecontroller->get_model( ).
*activate extended functions of the alv.
    cl_salv_wd_model_table_util=>if_salv_wd_table_util_stdfuncs~set_all(
       r_model = lo_value ).
    lo_value->if_salv_wd_table_settings~set_visible_row_count( '10' ).
    lo_value->if_salv_wd_table_settings~set_selection_mode( '06' ).
    lo_value->if_salv_wd_std_functions~set_pdf_allowed( abap_false ).
    DATA lr_column_settings TYPE REF TO if_salv_wd_column_settings.
    DATA lr_column TYPE REF TO cl_salv_wd_column.
    DATA lr_column_header TYPE REF TO cl_salv_wd_column_header.
    lr_column_settings ?= lo_value.
    lr_column = lr_column_settings->get_column( 'VBTYP' ).
    lr_column->delete_header( ).
    lr_column_header = lr_column->create_header( ).
    lr_column_header->set_ddic_binding_field( if_salv_wd_c_column_settings=>ddic_bind_none ).
    lr_column_header->set_text( '200708' ).
*change column to icon
    lr_column = lo_value->if_salv_wd_column_settings~get_column( 'AUART_DESC' ).
    CREATE OBJECT lr_image.
    lr_image->set_source_fieldname( 'AUART_DESC' ).
    lr_column->set_cell_editor( lr_image ). "Display images in column
Thanks again.
David

I can't print web pages or emails. All I get is a blank page with nothing but the headed tag at top.

I can't print my emails. Tried to get help from my email provider. They asked if I could print pages. I tried and found out that didn't work either. All I get is a blank page with the header tag at the top.

Hi,
Please see [http://kb.mozillazine.org/Problems_printing_web_pages this]. If the web page has a Print button/icon you can try to use that. You can also try right-clicking on the relevant section of the page > '''This Frame''' > '''Print Frame'''.
[https://support.mozilla.org/en-US/kb/fix-printing-problems-firefox?e=sph&redirectlocale=en-US&as=s&s=printing&r=0&redirectslug=Firefox+prints+incorrectly Fix printing problems]

Double clicking on an email header opens in a tab with the email reference but the header of a totally different email, the body of the email is blank, how fix?

Emails sitting in my inbox for a few days no longer open normally. Double clicking on them opens a tab referring to the header of the clicked email but below is a header and details from a totally different email and the body of the email is blank. For example double clicking an email from Tesco results in 'Tesco' displaying in the tab but the header below shows 'From: TalkTalk'
Clicking 'Options' and selecting 'Show remote content' does not overcome the problem.
Incoming emails open normally when they first come in.
This peculiarity seemed to apply only to a few emails at first but it is now becoming general.
Uninstalling and reinstalling Thunderbird (ver 31.6) and the problem remains. O/S is Windows 7
How can I overcome this?

Right click the problem folder and select Properties. Then Repair Folder. You may lose messages if the corruption is too bad.
Then read this article on maintaining your email.
http://kb.mozillazine.org/Keep_it_working_%28Thunderbird%29

Webi Formula with reference to the header values

Similar Messages

Maybe you are looking for