Webi hanging in Document View mode on prompt refresh after 15 seconds of inactivity

I have a particular issue with a report that contains 5 prompts, when I Refresh the report and quickly point, select, or otherwise refresh list of values and Run Query the report runs in a flash however if I wait for about 15 seconds as a new user might when thinking about the prompt values to select, when I then go to Refresh LOV or otherwise select the next prompt the Document hangs and I get the blue circle.
I am not getting a timeout because I can click on Home and reopen the report to continue. Any ideas if this is dropping the DB connection because of inactivity, etc? I cannot replicate this behavior I when open in Edit via the Java Report Panel only in Document View mode, and not all reports. This is causing issues with users as this is an important report they require.
We are on XIR3 sp3 Thanks.

I don't know of an add-on for this specifically. You can use either Scriptish or Greasemonkey (but not both at the same time) to inject Javascript into the page.
* https://addons.mozilla.org/firefox/addon/scriptish/
* https://addons.mozilla.org/firefox/addon/greasemonkey/
* http://wiki.greasespot.net
* https://userscripts.org

Similar Messages

How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.

How can you minimize or (turn) off the "side panel" in Web Intelligence in the view mode.
It is possible to turn on/off options within the Side Panel by Customization of Groups.
But it seems You cannot influence the way Web Intelligence present (minimized or Off) the Side Panel in the IE??
Is there a solution for this??
If not, it would be a nice property of a Web Intelligence document in a future release.

Hi Nico,
we patched up to BI 4.1 SP 3 Patch 2
and look look
click side panel to minimize
so .. patch patch ...

Need Help: Could WEBI report directly based on EXCEL file be refreshed?

In 3.0, Could WEBI reports directly based on EXCEL file be refreshed, after exporting to BOE platform?
I've made a test on that and find out WEBI report could not be freshed in Infoview while DESKI report could.
Some colleague suggest me to build the WEBI report based on a Universe created based on the EXCEL file.
I want to confirm, is it a by-design that we could only refresh WEBI report based on universe? or I could do some setting to made the refreshment of WEBI based directly on EXCEL file works?
Please Help!! Thanks a lot~~~

Hi Rachel,
You could try the Rich Client Product Guide [http://help.sap.com/businessobject/product_guides/boexir3/en/xi3_web_intelligence_rich_client_en.pdf] but I don't think it is a problem...more like a feature by design - it makes sense.
You could try the route of creating a universe on top of excel... See posts
[DBMS Independent universe;
[how to connect to excel sheet and create a universe on top of that;
Hope this helps
Jacques

WEB DMS Office Document Access- Password Prompt

Dear All,
Business Users are Using MS Office 2007 and MS Office 2003
We have Configured WEB DMS for Development System
In SE80 when CVAW_ENTIRE is Executed and when DIR is Accessed there using Display/Change, All file formats are accesed fine without any password prompt,But While Opening Microsoft Office Documents(.doc,.docx,.xls,.xlsx,.ppt..pptx) from WEB DMS DIR it gives UserName Password Prompt (Warning: This server is requesting that your username and password be sent in an insecure manner (basic authentication without a secure connection))....
When i don't enter username and password and press cancel file opens in Read Only Mode...So, i need is by default file shoud open in read only mode without asking unnecessary Password Prompt...Above is applicable when MS Office 2007 is installed in local PC
For Office 2003 the problem is there for .xls,.xlsx,.ppt,.pptx files , however .doc files opens fine and does not ask for any password prompt and opens in read only mode directly.
The above both scenarios for Office 2007 & Office 2003 works fine with Mozilla Firefox Browser and does not prompt for any passwords.
Help is Required urgently
Regards,
Akshit Patel

Dude
I'm also trying to enable WebDMS. I have already configured in SPRO.
In SE80, pointing on "CVAW_ENTIRE->Pages with Flow Logic->index.htm", when I click on "Test/Execute", a webpage opens but throws an error:
Business Server Page (BSP) error
What happened?
Calling the BSP page was terminated due to an error.
SAP Note
+    * The following error text was processed in the system:+
+      Die URL enthält keine vollständige Domainangabe (sap-dev statt sap-dev.).+
Exception Class     CX_FQDN
+Error Name     +
Program     CX_FQDN=======================CP
Include     CX_FQDN=======================CM002
ABAP Class     CX_FQDN
Method     CHECK
Line     10
Long text     -
Error type: Exception
Your SAP Business Server Pages Team
The URL of the webpage looks like this:
http://sap-dev:8080/sap/bc/bsp/sap/cvaw_entire/index.htm?sap-client=747&sap-sessioncmd=open
Please help.
Thanks & Regards
Amaresh Makal

How to Publish on the Web a PDF document in Reading mode only

Hello,
I'm planning to post on my web site my manuscript in PDF format. I would like to make it available in a reading mode only.. I wonder if ADOBE LIVECYCLE Rights Management would allow me to do so in a safe manner. What would be the cost?
Thanks.
PATEGA

Thank you for your reply.
De : Test Screen Name
Envoyé : 15 septembre 2014 05:51
À : Gaétan Patenaude
Objet : How to Publish on the Web a PDF document in Reading mode only
How to Publish on the Web a PDF document in Reading mode only
created by Test Screen Name <https://forums.adobe.com/people/TestScreenName> in Adobe PDF Pack - View the full discussion <https://forums.adobe.com/message/6730511#6730511>

Not able to find Interactive View Mode for WEBI in BI LaunchPad Preferences (BI 4.1 SP04).

Hi
I am not able to find Interactive View Mode for WEBI in BI LaunchPad's Preferences. It used to be there for BOXI R3. Is this feature has been revoked by SAP in this new release. Please confirm and clarify. Thanks!!

Hi,
In BI 4.0, We don’t have the option of Interactive mode, the only modes for viewing WebI documents are as follows:
1) Web: it is similar to the Interactive mode in XI 3.1. It means that you will use the HTML interface in BI launch pad to create, edit and analyze documents.
2) Rich Internet Application: This is similar to the Java Report Panel in XI 3.1.
You are using the Java interface in BI launch pad to create, edit and analyze documents .
But this requires the download of a Java applet.
3) Desktop (Windows only): in this case you are using Web Intelligence Desktop to create and edit documents, a standalone interface that works outside the BI launch pad. But this requires an install on your local machine.
4) PDF: Same as in BO XI 3.1
All view modes except PDF, have "Reading" and "Design" mode.
When you view a WebI document, the default mode is "Reading".
When you modify a WebI document, the default mode is "Design".
The user should use the modify option or view > Design, if he wants to modify a report.

In Lion, Safari pages hang in full screen mode. If you exit full screen mode, the next page you intended to view appears.

In Lion, Safari pages hang in full screen mode. If you exit full screen mode, the next page you intended to view appears.
This happens nearly every time I use Safari. I will be clicking on links, when it appears to hang. By exiting full screen mode, upon minimizing the next page I was intending to view appears. This does not happen on all websites, but many that I visit.

Here's a stupid question, but I'm sure I'm not the only one - how exactly DO you minimize the safari fullscreen mode?? I keep reading about orange or yellow tabs which don't exist, at least on my 27 iMac. Control m doesn't work either. I wish Apple would have a basic 3 or 4 page instruction manual on this. Unless there are major bugs still. By the way, this is only one of many problems I'm having with Safari. Occasionally the tool bar just dissappears. And, don't get me started about how the dock in Lion simply stopped accepting some icons, including Firefox. None of these problems happened when I first installed Lion. Each upgrade seems to have more bugs, not less.

Cursor Disappears After I Return From VIewing Web Video In Full Screen Mode

After I view a video from a web site in full screen mode using Safari v6.0.1 or Firefox v15.0.1, I escape to normal screen mode. When I then try to move the cursor using the built-in trackpad, I am unable to see the cursor anywhere on the screen. I do, however, see some artifacts of the cursor's movement in the text contained in the window and in the text of the menu bar as the cursor passes them.
What can I do to eliminate this "inconvenience"?

Fixed

Html View Mode for WebI

Hello,
I have a Problem to set the html view mode for WebI. Under Preferances I have the following Screen:
What right is missing and where I can find it? I'm using SAP BO 4.1 SP 3
Regards
Andreas

It could be a permissions issue at the CMC level - raise it with your administrator. Your Web Intelligence options shouldn't look like that by default in 4.1 SP3 (mine don't!)

Changing datasheet view column width prompts for logon

Hello - I have a SharePoint 2010 farm at work that we are having undesirable logon prompts on at times. A reproducible example is the datasheet view of any library in our site. When a user switches from standard view to datasheet view & then resizes
a column, a logon dialogue box pops up. They can enter their username or cancel - either way they are allowed to continue. This occurs the first time the user tries to make a change to the column width, but not on subsequent attempts. If the view is reloaded
& they attempt to change the width again the logon box pops up again. Users only have read-only access to the view, so they cannot modify it. The 'Modify View' control in the ribbon bar is greyed out.
Background info: Clients are using Windows 7 SP1, Internet Explorer 10 (in compatibility view mode), and MS Office Pro Plus 2010 SP2. SharePoint is 2010 SP1 & June 2011 CU V1 (I know, we need to patch). The site is setup to use NTLM integrated authentication.
All PCs are configured via GPO to add the site to the local Intranet zone. The intranet zone is configured via GPO with medium-low settings & automatic logon in the intranet zone. I have verified the GPO propagation to client PCs and verified that
IE settings are correct for windows integrated authentication to take place.
Any help is appreciated
~james

I am thinking this behavior is not by design. In my environment this is what happens:
A standard user (no modify view rights) changes a column width & gets prompted for credentials. It does not matter what they do - cancel, use own credentials, or use someone else's credentials (with modify rights) - the results are the same.
The view is not changed for everyone, just the local user. The change only applies to the current page load.
Users with modify view rights see no logon prompt.
I just installed Office 2013 with my test VM & the unwanted logon prompt is gone. My opinion is this is an unresolved issue with the Access Web Datasheet, 2010-version active-x plugin. It appears to have been fixed with Access 2013.
I'm going to do some more testing, but this is looking like another reason for an upgrade to Office 2013.
I tried changing the compatibility view settings, user agent string, Browser Mode, and Document Mode. None of the different combinations I tried had any effect on the logon prompt issue.
Any other ideas?
thanks

REQ: Add 'Fit-width' or 'Fit-visible' view mode, in which the zoom level is automatically set based on the width of the _current_ page.

Currently, the default zoom level when viewing a page of a PDF file is automatically calculated based on the width of the "widest" page of the document. This means that, if the document contains one page that is wider than the others or is in landscape orientation, then the default zoom, when viewing all the other narrower pages, is set in a way so that the page does not use the full width of the screen. This results in very poor experience, because the zoom level and the visible area of the page have to be constantly adjusted for each page. The latest update (at the time of writing) has added some extra view modes, but not the much needed 'Fit width' or 'Fit visible'.
Personally, I can find no reason valid enough to justify the lack of such a view mode. Automatically setting the zoom level based on the width of the current page so as to take advantage of the full width of the screen should be a must have feature for mobile devices, if not the default behavior. The current default behavior regarding the zoom level is pretty much useless, even on 8"/10" screens. There should be a view mode in which the full width of the screen is always used to display the document.
Examples of documents for which the Adobe Reader for Android provides a poor reading experience are:
documents which contain some of their pages in landscape orientation.
publications which, apart from the main content, also contain the full front and back cover in a single page (usually first page which is much wider than the content pages) or any other extra pages like cards or application forms (that are meant to be printed) which usually use an A4/Letter page size etc.
documents which have been cropped by external utilities or scripts so as to eliminate unneeded white margins (in some cases not all pages have the same width).
Please consider fixing the default behavior in future releases of the Reader for Android or add a 'Fit width' or 'Fit visible' view mode.
Thank you in advance.
Message was edited by: George Notaras
Improved descriptions of example documents.

To add to this, if you prefer you can separate your JavaScript from your JSF pages.
Add a folder (I named mine 'js') to your application's ViewController project's public_html folder.
Via JDeveloper, create a new JavaScript file inside your newly created folder and place your JavaScript functions inside it.
You can then 'load' the .js file using the method Shantala described, with the addition of an added 'source' property to the af:reference tag.
(This can also be a URI reference to a JavaScript file hosted on a web server)
<f:facet name="metaContainer">
<af:resource source="/js/myJsFile.js" type="javascript"/>
</f:facet>The benefits of this 'split' are cleaner JSF page source and also code-highlighting and formatting within the .js file making finding and fixing bugs in your JavaScript much easier.
It appears however, that when using <af:resource> to load scripts, once the page has been submitted even once, the JavaScript is no longer available to the page. Which isn't very useful.
A solution is to use <trh:script>.
Add xmlns:trh="http://myfaces.apache.org/trinidad/html" to your <jsp:root> tag and install the library.
then in place of the above code use:
<f:facet name="metaContainer">
<trh:script id="script1" source="/js/myJsFile.js"/>
</f:facet>Now after a page submit the JavaScript still functions.
Edited by: Matthew Carrigy on 12/08/2009 10:39

BO fails to display cloned reports with DATE_TIME data in View mode

Problem: We create a table using Rebean API. The table contains cells displaying DATE_TIME data (Detail). The cellu2019s formula is correct and the Applet shows the data alright. But when in view mode, there stand u201CINPUT_DATE_TIMEu201D text. If we open the report in the Applet and just click the cellu2019s formula without changing anything, the report starts to draw itself properly in view mode too.
We have to manually touch cloned reports with DATE_TIME values. Didn't find anything same in the search..
Can anyone help with this problem?
Great thanks,
Oleg

Hi Oleg,
It may help if you post the code that you are using to create the block (table) with the DATE_TIME data.
Please include the code from when you open/create the WebI document up to the point when you save the WebI document.
Regards,
Dan

Since iOS 4.2.1 Update - Document viewer Apps do not work right!

Before I updated to iOS 4.2.1 Air Sharing (Document Viewer) was working (so were all my Document Viewers), but currently, they do not work correctly. I have checked about three others...all have the following problems:
Since I updated (to iOS 4.2.1), all the documents open up to FULL SCREEN mode (which it had never done before, since the very beginning of the AppStore). Full Screen mode means that it looks like a Word Document on the computer, with the margins showing. This is rediculous for the screen of an iPhone or iPod Touch. There is no need to see the margins. Also, the font size is so small that it makes it almost impossible for most people without a magnifying glass. The document used to open up to a "zoomed in" view of the text. This allows the person using the application to actually read the text. This also allowed scrolling up and down easily. Now, with the new Full Screen view, to get the text large enough to see, you have to double tap (or spread your fingers on the screen to scale it big enough) on the text to read it. Then, when you scroll up and down, it sometimes scrolls side to side or diagonally (into the white margins), making reading cumbersome.
The other problem with the new view is that the font sizes are all messed up. The normal font (whether 9 pt. to 16 pt.) looks the same. The italic font looks bigger than the normal font, though it is the same point size. It skews the page and alters what the original documents looks like.
I have contacted the developer of Air Sharing to complain, but he said the following:
Hello,
Thank you for the test file. I do see what you're referring to. We use Apple's built-in Office viewer for Air Sharing. This means to display files like .docx ones, we use Apple's viewer. It's possible they changed their viewer in the most recent iOS update to cause this change. Because it's not our viewer we have no control over how it displays such files. Other apps using Apple's viewer will encounter the same issue. I wish there was more we could do on our end to help resolve this problem.
Cheers,
Elliot Chase
Avatron Software, Inc.
Please tell someone to fix this situation. I can provide you with information (and screen shots of before and after) to back up all my complaints. Thank you for listening.

Ah, so that could be a good search term.
Things get a bit more weird though. I was looking through the commands in the drop down menu and saw under "Archive" this: "Put/Send the Apps you bought to this computer" (rough translateion in English) So I tried that out.
I could only do that by going to "Store" and (**** how to say that in English) "Allow" this computer to do that. This is weird as this is the same computer that I have always used for anything to do with the iPhone! I have now 2 computers that are allowed to sync, and it is one machine. Beats me!
At a certain point the transfer proces stopped again and again I was requested to "empower" this computer again, as out of the 65 apps now 21 were not allowed to be transfered! That did not work. It now keeps telling me that I have 2 computers allowed for transferring apps and these last 21 can not be put in the library.
I am a bit at my wits end!
But really thanks for trying to help out! It seems that 4.2.1 has some real problems when reading through the discussions!
Cheers!

Remote Panels not working in embedded viewing mode

Hello,
I'm trying to develop a web version of my project using Labview remote panels. I configured the web server properties as it's described here: http://www.ni.com/white-paper/4791/en/
Currently I'm trying to create the web page on the web publishing tool. However when I select the Embedded viewing mode option I get an "Requested VI is not loaded into memory on the server computer" error on the web page that is created. But if I select Snapshot or Monitor viewing mode option the page is loaded without problems.
I'm using Labview 2013 and oppening the web page in google chrome. The VI from which I'm trying to create a remote panel has some subVIs that show the front panel when called. Is there anything I'm forgetting to configure, or do I need to have any plugins instaled on my browser?
Solved!
Go to Solution.

Mateus23 wrote:
I'm now developing the web version in HTML 5, using web services to comunicate with my labview application.
There you go, good solution. When doing this remember that you have access to the database on the server. A structure I have found effective is to use the server DB like a dropbox that I write to, and the web server reads from.
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

How to display web interface in full screen mode

Hi,
I would like to view my web interface in full screen mode in internet explorer. Is there anyway we can switch off the toolbars and URL automatically while calling the web interface
Thanks
SR

Hello SR,
I don't think it is possible to do this directly in the web interface. Otherwise many websites would change your browser settings.
It's possible to set the window properties, when the window is opened from JavaScript for example. So you could create a dummy start page and add some JavaScript to open a window for the web interface with the settings you require. Here's a good page that explains it:
http://www.fontstuff.com/frontpage/fptut06.htm
Regards
Marc
SAP NetWeaver RIG

Webi hanging in Document View mode on prompt refresh after 15 seconds of inactivity

Similar Messages

Maybe you are looking for