WEBI Hyperlink on entire column - Similar to RRI Jump Query in BW
Hello,
In BW it is possible to jump from one query to another query based on a single value in a column and/or all values in that column. I know in WEBI we could create hyperlinks on single values in a column. Is it possible to create a Hyperlink/Opendoc on the entire column in a WEBI report which would pass as parameters all the values in that column.
Thank you
if you are using a prompt in your main report make sure that prompt allows multiple values selections. Same for the detail report, make sure it has the same multiple values prompt with the same name.
Then follow these steps:
1. Open InfoView and change WebIntelligence Preferences to Interactive Mode. Save it.
2. Open main report and do not press Edit button.
3. Do right-click on the column's title cell you want a hyperlink to be inserted . Select Hyperlink->Newu2026
4. Hyperlink window displays
5. Browse you detail report
6. In "Document prompts option" do click on the black arrow and select "Builde formula" instead of the usual "Select variable".As you can see in this image:
https://weblogs.sdn.sap.com/weblogs/images/252123862/II.jpg
7. Insert this formula in formula window:
=UserResponse("Year:")
Then press Ok and test your hyperlink.
(for more illustrations see this blog: /people/erika.atencio2/blog/2011/04/14/creating-hyperlinks-between-webi-reports-in-infoview)
Hope this helps
Regards, Erika
Edited by: PadawanGirl on Apr 21, 2011 6:02 PM
Similar Messages
-
How to apply =Hyperlink() to entire column
I created the following formula: =HYPERLINK("http://www.somewhere.com/search.aspx?kw="&C2, C2), where C2 is relative to the cell in which apply the formula. So in effect I am attempting to create relative Hyperlink URLs down a column. Here's my problem, I cannot copy-and-paste this formula to entire column because the cell I need to copy is now a hyperlink.
Open the hyperlink inspector:
and check the box "Make all hyperlinks inactive". Now copy and paste the formula, then select the whole column and paste -
RRI Jump Query opens the receiver query in standard Template??
Hi,
Few questions from me (Note I have searched the forum database for answers but didnt get a convincing answer)
1) How can I use 1 web custom built template for 2 different queries?
2) I have created the sender receiver setting for the Jump queries. The problem that I am facing is that the sender query uses the custom built web template but when I use GOTO the receiver query instead of using the custome template it executes in standard webtemplate. Kindly suggest how can I open the receiver query in the custom built web template after GOTO function.
Thanks for all your help in advance..
- AmitHi SS,
I agree to the statement that RRI uses link to Query but if we setup the custom web template for that jump query in WAD....it will never open in that template via RRI ???
That very disappointing discovery for me !!!
Any other possiblity to make this work????
What if I have the sender and receiver query web template(custom) same???.is it possbile to use the same template for these two template even after jump ???
Regards -
Hi SDN,
Both queries work indepedently but refuse to work through RRI/Jump. The receiver query returns 'No applicable data found' while there is data on both sides at the most granular level.
What values/parameters are passed from the sender query and how does the receiver query uses them to fetch data? Our sender query is over a Multiprovider and the receiver query is over an infoset.
I am more interested in the inner workings of RRI (to resolve this problem) than the procedure to set up jump which I know.
Also, on the field assignment button, the Check and delete buttons do not do anything. Any suggestions? And what is the purpose of field assignment window?
Thanks.
Saf.By default, all char from the row are transferred as selections to the corresponding filters in the target query ('generically' option).
I am not sure whether something which is not a char in the sender can be sent to the receiver, probably not.
The definition is in the assignment tab. If you do a F1 on the individual cells there, it will explain how the assignment options are to be used.
- Added -
Right, what you say above. I am not sure if there is any way to pass the sender's variables to the receiver.
Message was edited by: Ajay Das -
RRI - Jump query, unable to pass the variable value from source to target
Hi,
I've a source query which has a variable on 0vendor, from this query i jump to another query for which i want to pass the this variable value, in the target query i've vendor in free characteristics (no filter or variable in there), and in RSBBS i tried the assignment details options keeping vendor as generic, tried variable and the variable name but nothing seem to work.
But when query is run i can jump into target query but the vendor variable value doesnt get passed thru the values i get in target query is for all rather than for the variable entered vendor value in the source.
btw we're in NW2004s.
any help appreciated with points.
thanks
MayilAnyways, I read somewhere that a variable with replacement path in target query would work, tried it seem to work.
let me know if there other way to do it without creating a variable in target query.
thanks
mayil -
BW RRI /Jump query functionality in Design Studio
Hi Folks
Could someone throw light on the following functionality:
I am using Design Studio 1.2 with BI 4.1 SP1 and BW 7.3 SP9 .
I have a BW query which is having jump query in it. I have included it in the Design studio. I have configured Query A .
But with in the same page/Cross tab i am not able to configure the jump query.
Is there a standard /customizing way to achieve this functionality? if yes how.
Thanks in advance for your help..!
Cheers
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!****Hi Tammy
Thanks for quick answer.
Is theer any work around to achieve jumpquery functionality in DS1.2.
Thanks in advance for your help..!
Cheers
K M R
***Even if you have nothing, you can get anything.
But your attitude & approach should be positive..!**** -
Can I have a product formula in an entire column that will multiply the previous two columns?
Trying to enter a product formula for an entire column that will multiply the previous two columns without having to select each row of two cells and clicking on "product". This is tedious. Thanks.
My own tip to apply fill down to a column :
click the tab at top of the column to select the entire column
press command then click the header cells to unselect them
Trigger Table > Fill > Fill Down
It's the kind of info which is available in Numbers User Guide.
It's always good practice to Read The Free Manual.
Yvan KOENIG (VALLAURIS, France) mercredi 21 septembre 2011 21:07:53
iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.0
My iDisk is : <http://public.me.com/koenigyvan>
Please : Search for questions similar to your own before submitting them to the community -
How can I move columns in Numbers without distorting the formula in other cells? In Excel I can cut and paste entire columns and the formula in other cells adjusts accordingly. When I do it in Numbers, the formula messes up. How can I do this?
For example: I have formulas in columns D and F that relate to columns C to CU
If I want to move one column from one position to another (say S to T), the formula loses the colums that was moved, i.e. it doesn't recognize it has moved, rather sees it as deleted... How can I do this without distorting the formula?Thanks for the feedback.
If I often urge askers to look at the available resources, it's because a large range of questions asked in the forums are already answered in these documents.
As they are PDFs, they are easy to search in.
CAUTION
Download them while they are available.
Given what is delivered with iBooks Author, I'm afraid that we will not get such easy to use documents.
Searching infos in the iBooks Author documentation available on line is awfully cumbersome and a lot of embedded links are wrongly flagged this way. In the Help files they aren't links but underlined strings.
It seems that the tool used to generate the web pages was wrongly configured.
Yvan KOENIG (VALLAURIS, France) dimanche 22 janvier 2012
iMac 21”5, i7, 2.8 GHz, 12 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
My Box account is : http://www.box.com/s/00qnssoyeq2xvc22ra4k
My iDisk is : http://public.me.com/koenigyvan -
Why won't 'IF-Statement' Formula work for an entire column?
I am trying to make an IF formula subtract a cells value from another cells value, creating a 'balance'. The formula is working when selecting one cell for each part of the formula, but is not working when I try to use the formula for multiple cells (entire column). The formula I am using for single cells is as follows:
=IF(Monthly Timeline :: F2="Citi",Monthly Timeline :: D2+1000,1000)
The formula works with way, when I select the pop-up menu in F2 to say "Citi" it will add the value of D2 to 1000 and give me a proper solution, but when I change it to the entire column as follows:
=IF(Type="Citi",Amount+1000,1000)
The formula for entire columns 'Type' and 'Amount' does not produce a proper solution, it will display 1000, no matter how many values in the 'Amount" column have "Citi" selected in the pop-up menu in the 'Type' column.
I know there is a way to make this formula work but I can't seem to figure out what I am doing wrong any help would be greatly appreciated.
Thanks!the function if() does not apply to a column. the functions sumif() and sumifs() do apply to columns. You can get detailed information regarding these functions in the function browser. To open the function browser select the menu item:
"View > Show Function Browser"
OR dowload the free function reference from Apple here:
http://support.apple.com/manuals/#productivitysoftware
The document is titled "iWork '09 Formulas and Functions User Guide"
There is also a User Duide you may find helpful: "Numbers '09 - User Guide" -
Failed validation highlights entire column in tabular form
Hi,
I have a tabular form where one of the field is a date field. I need to ensure that that the date selected or entered falls in the correct range of another page item P6_WEEK_ENDING. Here is my code.
DECLARE
last_week_fri DATE;
this_week_fri DATE;
in_range NUMBER:=1;
ret_bool BOOLEAN := TRUE;
BEGIN
-- Get current end of week ID
this_week_fri:= CONVERTDATE2(:P6_WEEK_ENDING);
SELECT CONVERTDATE2(this_week_fri-7) INTO last_week_fri FROM DUAL;
FOR i in 1..apex_application.g_f03.count LOOP
IF apex_application.g_f03(i) IS NOT NULL THEN
CASE
WHEN CONVERTDATE2(apex_application.g_f03(i)) >= CONVERTDATE2(last_week_fri) AND CONVERTDATE2(apex_application.g_f03(i)) <= CONVERTDATE2(this_week_fri) THEN
null;
ELSE
in_range:=0;
END CASE;
END IF;
if in_range != 1 THEN
ret_bool:= FALSE;
EXIT;
END IF;
END LOOP;
return ret_bool;
END;Where
convertdate2 takes date format and outputs date in dd-mm-yyyy format.
apex_application.g_f03(i) is the date field.
Now it all works well except when my validation fails, it highlights the entire column instead of highlighting the only the bad entries.
I have my execution scope as : Created and Modified Rows, tried changing it with no luck.
Many thank.
Environment: APEX.4.1.1 using Sand themeTaepodong ,
I assume this is a validation. When you first created the validation, you either selected a page item or tabular form. If you selected the latter, you then selected the tabular form to which the validation would apply. On the next screen, you were asked to "Identify the validation level:" I am guessing that, at that point, you selected "Tabular Form Row" rather than "Column" The former will highlight the entire row, while the latter will only highlight the column which was specified.
-Joe -
Connecting Web and the entire OTC cycle (Part 2)
I am a .Net programmer and at the same time SAP SD Consultant but just new to this SAP field. I will be creating a website where the customer orders will be recorded. Based on my research in this forum, connecting a website and SAP will be possible (as advised by the people here - [source|Connecting Web and the entire OTC cycle;).
Here is my question. If I will create a website that will take control of the entire Order-To-Cash cycle, will I have problem connecting my website to SAP (back and forth), or it will be the problem of the ABAP person?
I do not have the slightest idea on how to connect to SAP if the front-end is a browser/website. I only know how to program using Microsoft ASP.Net
Please help. Thanks.Hi,
The problem really depends on where the connection is failing..
pls check the following and I hope that really helps:
[http://help.sap.com/saphelp_NW04/helpdata/en/51/d5470940fd564b888f4beb9523fa6c/content.htm]
[https://media.sdn.sap.com/html/submitted_docs/dotnet/Programming%20with%20PDK%20for%20.NET/Connecting%20to%20SAP%20NetWeaver%20Systems/Using%20SAP%20.NET%20Connector.htm]
Regards
Raghu. -
How to reordering a table without coloring the entire column ?
Hi,
When I click on a column header to re-order the table, the entire column is show in a differente color. Is there any way to avoid this behave ?
Thanks,
M�rcioJavadoc for IWDNode says:
public void clearSelection()
Clears the Node's multiple selection; does not change the lead selection.
public void setLeadSelection(int index)
Sets the lead selection to the given index. It may be called with NO_SELECTION to reset (clear) the lead selection.
Parameters:
index - the index of the element
Throws:
ContextException - if caller tries to reset the selection, but selection is mandatory
IndexOutOfBoundsException - if the given index is not within the element list
See Also:
getLeadSelection()
Armin -
How to Hide a entire column in a Table Control?
Can we hide an entire column in a Table control? Plz give some hints in doing the same...
Here is a sample, if you wish to do it programattically. If you used the table control wizard, then you should have a module which is listed in the flow logic PBO of the screen. Its probably commented out.
itabcon_change_col_attr
Uncomment it and create the module. Then put the code that I have in the module below into your module.
report zrich_0003 .
*&spwizard: declaration of tablecontrol 'ITABCON' itself
controls: itabcon type tableview using screen 0100.
data: begin of itab occurs 0,
fld1 type c,
fld2 type c,
end of itab.
start-of-selection.
call screen 100.
*& Module STATUS_0100 OUTPUT
* text
module status_0100 output.
* SET PF-STATUS 'xxxxxxxx'.
* SET TITLEBAR 'xxx'.
endmodule.
*& Module ITABCON_change_col_attr OUTPUT
* text
module itabcon_change_col_attr output.
<b> data: wa like line of itabcon-cols.
loop at itabcon-cols into wa.
if wa-screen-name = 'ITAB-FLD2'.
wa-invisible = '1'.
modify itabcon-cols from wa.
endif.
endloop.</b>
endmodule.
Regards,
Rich Heilman -
I am working on a research project using Numbers 09 and have columns for values that require me to use formulas using values in other columns. Becuase I am lazy and have 180 rows of data, I would like to find a way to have a formula apply to an entire column so that I don't have to go row by row inputting the formula.
Essentially, I want to be able to have N(X)=F(X)+G(X). Where X is the row number. Is this possible?
The real formula I want to have is (4*(F(X))^2)/G(X)
Thanks!Place this formula in your chosen column in the first row containing data in columns F and G.
=(4*F^2)/G
Press enter to confirm the entry. The result will appear in the cell.
Click (once) on the cell containing the formula.
Shift Click on the cell in the same column on the last row containing data in F and G to select all cells between. .
Go Insert > Fill > Fill down.
Done.
Regards,
Barry -
How do I write a macro that would look for a string in an entire column
how do I write a macro that would look for a string in an entire column. If the string is found, it will copy that entire row to a new sheet in that same file?
I want to look in an entire column lets say "C" for different strings of numbers like 246, 88, 68, 82246 etc... and copy them to a new sheet
ThanksHello Larbec,
Try this:
Option Explicit
Sub test()
Dim myNumber As Integer
Dim myNumbers() As Integer
Dim i As Integer
Dim c As Range
Dim firstAddress As Variant
myNumbers = Array(246, 88, 68, 82246)
For i = 0 To UBound(myNumbers)
myNumber = myNumbers(i)
With ActiveSheet.Range("C:C")
Set c = .Find(myNumber, LookIn:=xlValues)
If Not c Is Nothing Then
firstAddress = c.Address
Do
' Copy c.value to OtherSheet here !!!!
Set c = .FindNext(c)
Loop While Not c Is Nothing And c.Address <> firstAddress
End If
End With
Next i
End Sub
Best regards George
Maybe you are looking for
-
Have troubles with the filesystem; is this the right forum?
Diskutility does not show any error on an iMac, SMART should be ok (tested). WhatSize running on the iMac and over FW targetmodus shows the Document folder emty (it is not empty, of course). Finder shows the size in both methods with 78GB. At this ti
-
Hello Community. My ipod nano 7g has been stolen - is there a possibility to find and block it if the ipod is connected via itunes?
-
GarageBand quit unexpectedly. :(
When I try to open GarageBand I get the Problem report page with this message. Dyld Error Message: Library not loaded: /System/Library/Frameworks/CoreMIDI.framework/Versions/A/CoreMIDI Referenced from: /Applications/GarageBand.app/Contents/MacOS/../F
-
IMAP problem with sent messages
Hello, I have a the default mail server running in OS X 10.4.3 serving a handful of clients via IMAP, and all works fine except that a few weeks ago, sent mesages stopped appearing in Apple Mail. Save sent messages has always been checked on all clie
-
When I click on iPhoto it doesn't come on, how can I get it to load?
I can't get iphoto to turn on! I click on it and nothing comes up. Help!