WebLogic Cluster License Question

We are currently testing WebLogic 5.1 clustering in our dev environment. I have 4 instances of the clusters running on the same machine but under different IP addresses. I have separate license files under individual license directories under each server under a directory called mycluster. the license file in each of these directories pertain to the ip address for each cluster. However, when I attempt to start the individual servers I receive an error stating that my license file does not contain the multicast ip address, and not the individual server ip's. Help.

          Unless using evaluation cluster license, you have to separate those
          4 licenses to different location if binding with 4 ip. Your 4 WL
          startup scripts must specify the same multicast address in order
          to communicate other clustered nodes.
          Brian
          "Aruna" <[email protected]> wrote:
          >
          >Hi Shawn
          > You need a multicast ip address for cluster
          >to work,
          >caz all the servers running in the cluster communicate
          >with each
          >other through assigned multicast ip, so contact your sys
          >admin
          >for setting up a multicast ip address. More over you may
          >don't
          >have to replicate license files to different directory
          >for different
          >servers, if the license is for clustering. The license
          >can be for
          >primary ip of the system with license for "ClusterII"
          >component.
          >
          >
          >
          >shawn ayers <[email protected]> wrote:
          >>We are currently testing WebLogic 5.1 clustering in our
          >>dev environment. I have 4 instances of the clusters
          >>running on the same machine but under different IP addresses.
          >> I have separate license files under individual license
          >>directories under each server under a directory called
          >>mycluster. the license file in each of these directories
          >>pertain to the ip address for each cluster. However,
          >>when I attempt to start the individual servers I receive
          >>an error stating that my license file does not contain
          >>the multicast ip address, and not the individual server
          >>ip's. Help.
          >

Similar Messages

Weblogic server licensing question

We use jrockit 8.1 on a redhat as 3.0 linux machine with 2 xeon intel processors with hyperthreading. As suggested in the release notes (
http://e-docs.bea.com/wljrockit/docs80/relnotes/relnotes.html#1034906) I made the changes required to make jrockit aware of hyperthreading. Our license is for 2 cpus. However, when I run the top command it shows 4 cpus. Is this going to be a licensing problem with weblogic?
Thank you

You may call 1-800-426-9400, Monday through Friday, 6:00 A.M. to 6:00 P.M. (Pacific Time) to speak directly to a Microsoft licensing specialist.
Microsoft License Advisor LINK:
http://www.microsoft.com/licensing/mplahome.mspx.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014

How to setup weblogic cluster in 6.1 SP4

          Hi All,
          I have a Licensed weblogic in my solaris servers. I need to test weblogic clustering
          . How can i simulate weblogic clustering is there is any easy steps to do that
          and what should i do in order to make my EJB`s cluster aware. And some ppl say
          that i need to take a seperate weblogic cluster license other than the weblogic
          license.Kindly help me in proceeding further
          Thanks in advance
          Bala.J


Hi
I have same problem at beforetime.
You can do follow:
Step 1:
copy rt.jar form JDK 1.2.1\jre\lib\jar
to J2EE1.2.1\lib\system\
Step 2:
Set J2ee_classpath = c:\j2ee1.2.1\lib\system\rt.jar
Step 3:
Restart computer and J2ee
You can try it
Help can help you
David

Cluster License weblogic 10

Do I need a cluster license if I'm runnning a cluster for testing and evaluation purpose?

Kai Niklas wrote:
          > Do I need a cluster license if I'm runnning a cluster for testing and evaluation purpose?
          You don't need any special cluster license. You can use default one.
          Remember only about 5 connections limitation per single server.
          Best Regards,
          Karol Muszynski

Having issue with start weblogic cluster with tangosol cluster

Hi,
Oracle Coherence Version 3.3.1/389p1
Grid Edition: Development mode
We are using Weblogic 8.1.5 with Tangosol 3.3.1 on Linux servers.
And we added the initializing logic in the servlet's init() method to get all NamedCaches and put into the ServletContext.
When we start weblogic cluster, the first weblogic member will startup successfully with following messages :
<Nov 7, 2007 10:12:30 AM EST> <Info> <HTTP> <BEA-101047> <[2007-11-07 10ServletContext(id=259640596,name=clusterqa,context-path=)] initObjects: init>:12:31.565 Oracle Coherence 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded operational configuration from resource "zip:/home/server/clusterqa/wls81/DOCVIEW/docqa1/.wlnotdelete/extract/docqa1_DOC_clusterqa/jarfiles/WEB-INF/lib/coherence.jar!/tangosol-coherence.xml"
2007-11-07 10:12:31.598 Oracle Coherence 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded operational overrides from file "/home/www/WEB-INF/lib/tangosol-coherence-override.xml"
Oracle Coherence Version 3.3.1/389p1
Grid Edition: Development mode
Copyright (c) 2000-2007 Oracle. All rights reserved.
2007-11-07 10:12:31.938 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded cache configuration from file "/home/www/WEB-INF/lib/pub-search-cache-config.xml"
2007-11-07 10:12:31.983 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): sun.misc.AtomicLong is not supported on this JVM; using a synchronized counter. Though safe to ignore, you may upgrade to BEA's 1.5 JVM to fix this issue.
2007-11-07 10:12:33.267 Oracle Coherence GE 3.3.1/389p1 <Warning> (thread=Main Thread, member=n/a): UnicastUdpSocket failed to set receive buffer size to 1428 packets (2096304 bytes); actual size is 89 packets (131071 bytes). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.
2007-11-07 10:12:34.118 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2007-11-07 10:12:37.508 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Cluster, member=n/a): Created a new cluster with Member(Id=1, Timestamp=2007-11-07 10:12:33.323, Address=10.5.176.86:8088, MachineId=48982, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=2) UID=0x0A05B056000001161AAB782BBF561F98
2007-11-07 10:12:37.736 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Invocation:Management, member=1): Service Management joined the cluster with senior service member 1
2007-11-07 10:12:38.168 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=DistributedCache, member=1): Service DistributedCache joined the cluster with senior service member 1
<Nov 7, 2007 10:12:38 AM EST> <Info> <HTTP> <BEA-101047> <[ServletContext(id=259640596,name=clusterqa,context-path=)] xslProcessor: init>
But trying to start the second weblogic member server, the startup process is stucked after tangosol cache initialization and the second weblogic member server never up running. Please see following messages :
<Nov 7, 2007 9:49:38 AM EST> <Info> <HTTP> <BEA-101047> <[ServletContext(id=153019550,name=clusterqa,context-path=)] initDSNames: init>
<Nov 7, 2007 9:49:42 AM EST> <Info> <HTTP> <BEA-101047> <[ServletContext(id=153019550,name=clusterqa,context-path=)] initObjects: init>
2007-11-07 09:49:43.156 Oracle Coherence 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded operational configuration from resource "zip:/home/server/clusterqa/wls81/DOCVIEW/docqa2/.wlnotdelete/extract/docqa2_DOC_clusterqa/jarfiles/WEB-INF/lib/coherence.jar!/tangosol-coherence.xml"
2007-11-07 09:49:43.188 Oracle Coherence 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded operational overrides from file "/home/www/WEB-INF/lib/tangosol-coherence-override.xml"
Oracle Coherence Version 3.3.1/389p1
Grid Edition: Development mode
Copyright (c) 2000-2007 Oracle. All rights reserved.
2007-11-07 09:49:43.528 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): Loaded cache configuration from file "/home/www/WEB-INF/lib/pub-search-cache-config.xml"
2007-11-07 09:49:43.571 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Main Thread, member=n/a): sun.misc.AtomicLong is not supported on this JVM; using a synchronized counter. Though safe to ignore, you may upgrade to BEA's 1.5 JVM to fix this issue.
2007-11-07 09:49:44.829 Oracle Coherence GE 3.3.1/389p1 <Warning> (thread=Main Thread, member=n/a): UnicastUdpSocket failed to set receive buffer size to 1428 packets (2096304 bytes); actual size is 89 packets (131071 bytes). Consult your OS documentation regarding increasing the maximum socket buffer size. Proceeding with the actual value may cause sub-optimal performance.
2007-11-07 09:49:45.419 Oracle Coherence GE 3.3.1/389p1 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
2007-11-07 09:49:45.555 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Cluster, member=n/a): Failed to satisfy the variance: allowed=16, actual=47
2007-11-07 09:49:45.555 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Cluster, member=n/a): Increasing allowable variance to 19
2007-11-07 09:49:46.040 Oracle Coherence GE 3.3.1/389p1 <Info> (thread=Cluster, member=n/a): This Member(Id=2, Timestamp=2007-11-07 09:49:45.69, Address=10.5.176.85:8088, MachineId=48981, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=2) joined cluster with senior Member(Id=1, Timestamp=2007-11-07 09:45:10.205, Address=10.5.176.86:8088, MachineId=48982, Edition=Grid Edition, Mode=Development, CpuCount=4, SocketCount=2)
Could you please explain why it happens, and what should I do to resolve this issues ?
Many Thanks,
Bing

Hi, Gene
Thank you for the response. I will send you our full log files and thread dumps.
I just want to give you more details about our cases :
1. This only happened without starting cache servers (com.tangosol.net.DefaultCacheServer).
2. And our application which are running on weblogic cluster will just call "CacheFactory.getCache("XXX")", and running as the Tangosol DataClient.
3. All weblogic member servers will be up running successfully if our cache servers are up running.
Also I tried to test another case :
Suppose all weblogic instances and cache server instances are up running. Now I trying to restart (kill weblogic instance process and restart) one of the weblogic member, It will up running successfully only if add some sleep times after killing weblogic processes and restarting it. Looks like tangosol cluster need certain time to aware the member has left cluster, then the restart process will be successful.
Questions :
1. Should we start our weblogic cluster only after cache server cluster is up running ?
2. How do we decide how many time we should wait before start new process to join the cache cluster ?
Could you please help to explain this one for me and let us if there anyway we can do to avoid the problem.
Many Thanks !!!
Bing

Single sign-on in weblogic cluster?

          I am using wls 7.0 sp1 that form a cluster by two managed servers each at different
          physical machine.
          In front of the servers, a hardware load-balancer providing a virtual ip that
          mapped to the real ip of the 2 machines.
          I deployed a web application to the cluster. The html & jsp files are all protected
          by Form Based Authorization.
          My expectation is, whenever I sign-on to the first managed server, the login credential
          should also be valid for the second managed server.
          But it is not the case.
          My situation is:
          - open brower with url: http://virtual.ip:7001/admin.jsp
          - the load balancer map the request to my first managed server.
          - the response from the first managed server prompt the login page for username
          and password.
          - after POST the information, my target admin.jsp page display properly.
          - when I click the link within the admin.jsp page, eg. http://virtual.address:7001/status.jsp
          there is two possibilities:
          1. the load balancer route the request to the first managed server and everything
          well.
          or
          2. the load balancer route the request to the second managed server and response
          with login page again.
          The second case is definitely not what I expected.
          Question:
          Is it the default behavior of Weblogic cluster on the single sign-on? I think
          my login is against a WLS domain (at least a cluster), not to a specific web server!
          Any comments are welcome.


          Note my answer is not directly related to your question, but it might help.
          From my experience to configure WL cluster with hardware load balancer, the session
          stick (layer 7 switch) should be used (either using the session cookie, or ServerID
          cookie). That is, unless one instance is down, all requests from the same session
          are better go to the same server. I ever tried round-robin or random load balance
          policy at hardware load balancer without session stick, and the result was as
          disappointing as you have seen.
          "franky c." <[email protected]> wrote:
          >
          >
          >I am using wls 7.0 sp1 that form a cluster by two managed servers each
          >at different
          >physical machine.
          >In front of the servers, a hardware load-balancer providing a virtual
          >ip that
          >mapped to the real ip of the 2 machines.
          >I deployed a web application to the cluster. The html & jsp files are
          >all protected
          >by Form Based Authorization.
          >
          >My expectation is, whenever I sign-on to the first managed server, the
          >login credential
          >should also be valid for the second managed server.
          >
          >But it is not the case.
          >
          >My situation is:
          >- open brower with url: http://virtual.ip:7001/admin.jsp
          >- the load balancer map the request to my first managed server.
          >- the response from the first managed server prompt the login page for
          >username
          >and password.
          >- after POST the information, my target admin.jsp page display properly.
          >- when I click the link within the admin.jsp page, eg. http://virtual.address:7001/status.jsp
          > there is two possibilities:
          > 1. the load balancer route the request to the first managed server
          >and everything
          >well.
          > or
          > 2. the load balancer route the request to the second managed server
          >and response
          >with login page again.
          >
          >The second case is definitely not what I expected.
          >
          >Question:
          >Is it the default behavior of Weblogic cluster on the single sign-on?
          >I think
          >my login is against a WLS domain (at least a cluster), not to a specific
          >web server!
          >
          >
          >Any comments are welcome.
          >
          >

Caching read-only data in a weblogic cluster: Need Help

Hello,
I'm working on the development of a web site that will be based on a weblogic cluster spread across several weblogic instances running on several unix boxes.
To avoid frequent hits to the database, I would like hold a huge amount of data in the application's in-memory cache. The idea is to query the database at startup and store the results in memory for the life of the JVM.
I have three questions around this:
1. Is it advisable to store this data in the form of read-only entity beans?
2. If not, what other options do I have?
3. In some rare cases, a back-end script might change (and commit) data contained in one or two of these 64000 records. What is the best way of propagating these data changes across the cluster?
Any help in this regard would be greatly appreciated.
Regards,
Dipak Jha

Could somebody please guide me on this?
Dipak Jha

Using weblogic.cluster.singleton.SingletonService

We have written a Singleton class implementing this interface
weblogic.cluster.singleton.SingletonService
http://otndnld.oracle.co.jp/document/products/wls/docs100/javadocs/weblogic/cluster/singleton/SingletonService.html
and have seen on one occasion a thread dump which shows 2 instances of the class actively running at the same time
the docs say
This interface defines a stateless lightweight singeton service that has the following contract:
Activate is invoked on one and only one server in a cluster
The question is whether this implies there is only one instance within that server at any time, or can multiple exist?

No, only one instance will be started at one single managed server in the cluster.

Web Proxying to a WebLogic Cluster using the HTTPS protocol

Hi all,
I am recently involved into JWS proxying to WebLogic Cluster.
I don't have any technical problems at the moment but "conceptual" problems, that is:
- my jws proxy server should connect to a WebLogic Cluster through a Bea plugin configured wish SSL parameters;
- my jws proxy server should pass the incoming request using a load-balancing algorithm among the two nodes of the cluster, that are actually installed on two different machines;
- the jws proxy server doesn't seem to accept multiple certificates.
My question is: how can I configure my proxy plugin to route the incoming requests to my WebLogic Cluster using the https protocol? As a matter of fact, each certificate should be hostname dependent, and it looks like that the proxy plugin doesn't accept a multiple certificate configuration (and it should actually match the CN entry in the certificates with the actual hostnames of the nodes).
Any hint?
Thx a lot,
Luca

It is supported in 5.2
          - Prasad
          Wei Guan wrote:
          > As I knew of, secure proxying is not supported yet.
          > --
          > Cheers - Wei
          > Bob Kiep <[email protected]> wrote in message
          > news:8bvvc7$7uf$[email protected]..
          > > The NSAPI plugin cannot perform SSL proxying, as documented at the bottom
          > of
          > > this message (taken from
          > > http://www.weblogic.com/docs/admindocs/nsapi.html#background). When
          > > Weblogic is the proxy, can I do SSL? If someone could send me the link to
          > > where is states whether is SSL or not would be very helpful.
          > >
          > > "The plug-in is for an environment where NES serves static pages, and a
          > > Weblogic Server (operating in a different process, possibly on a different
          > > host) is delegated to serve dynamic pages (such as JSPs or pages generated
          > > by HTTP Servlets). The connection between WebLogic Server and the NSAPI
          > > plug-in is clear text http, not SSL. To the end user -- the browser -- the
          > > HTTP requests delegated to WebLogic appear to come from the same source as
          > > the static pages. In other words, WebLogic on the back-end is invisible.
          > > Additionally, the HTTP-tunneling facility of the WebLogic client-server
          > > protocol can operate through the plug-in, providing access to all WebLogic
          > > services (not just dynamic pages). "
          > >
          > >
          Cheers
          - Prasad

Exploded (hot) deployment on a Weblogic cluster

AFAIK, exploded hot deployment on a Weblogic cluster is not supported through OEPE.
When deploying an application on a cluster, each change, no matter how small, forces you to republish these changes, ultimately causing the application to be redeployed by OEPE. Turnaround time for this (depending on the app) can take some time.
Is there a workaround available for this ?
I'm looking for a way to minimize the turnaround time between developing code, and actual seeing the code changes on the screen. The requirement however is that deployments should be possible on a managed instance / cluster (non AdminServer).
Does Oracle Weblogic support such "hot deployment" capabilities from an IDE like Eclipse ? Does anybody here have such a process in place ? (perhaps using ant / maven2 tooling)

Hi
I want to clarify that the application has to be deployed to a cluster of two managed servers, amandad_Server_1 (On Windows server hosting console) and amandad_Server_2 which is running in other Windows server.
I deployed the application following your recdommendations and the resulta is as follows:
Windows server (running the console)
1 EAR file was copied to ... \user_projects\domains\amanda_domain\servers\amandad_Server_1\stage
2. The application files extractected from the EAR files were copied to   \user_projects\domains\amanda_domain\servers\amandad_Server_1\tmp
Windows Server not runn ing the console
No files were copied to neither
... \user_projects\domains\amanda_domain\servers\amandad_Server_2\stage
     \user_projects\domains\amanda_domain\servers\amandad_Server_2\tmp
Questions
1 Windows server not running the console the files were not copied....What might cause this behaviour....? how to fixi it...?
2. Do I have to manaully copy the files to folders
...\user_projects\domains\amanda_domain\servers\amandad_Server_2\stage
   ... \user_projects\domains\amanda_domain\servers\amandad_Server_2\tmp

ACFS recomandations for weblogic cluster

Hi,
Can some one help me to findout material(step by step) for ACFS usage with weblogic clustering.
Originally I started thread here :
Re: ACFS recomandations for weblogic cluster
Thanks in advance for valuable time
Datla

The first question you need to ask yourself is for what purpose do i need this type of filesystem when using a WebLogic Cluster?
The first which comes to mind is the migration of so-called singleton service, such as JMS Servers, persistence stores and JTA.
For example, when a machine fails, we must bring the services, running on the failed machine, up on other machines. The JTA
service plays a critical role in recovery from a failure scenario where transactions are involved. In-flight transactions can hold locks
on underlying resources. If the transaction manager is not available to recover these transactions, resources may hold on to these
locks for a long time. This makes it difficult for an application to function properly. JTA service migration is possible only if the server's
default persistent store (where the JTA logs are kept) is accessible to the server to which the service will migrate.
This where a shared storage mechanism comes into play - to store files which need to be accessible from every server. The concept
of ACFS which is useful in this scenario is the mount model (http://download.oracle.com/docs/cd/E14072_01/server.112/e10500/asmfilesystem.htm#CACJGEAC)
To set-up a mount point you can follow the steps presented here: http://download.oracle.com/docs/cd/E15051_01/wls/docs103/cluster/service_migration.html#wp1049463
This link contains the steps in order to configure JMS migration: http://download.oracle.com/docs/cd/E15051_01/wls/docs103/cluster/service_migration.html#wp1065826
This link contains the steps in order to configure JTA migration: http://download.oracle.com/docs/cd/E15051_01/wls/docs103/cluster/service_migration.html#wp1054024

How to deploy WebLogic Cluster on a Blade?

Hi, I am looking for recommendations on how ( if it makes sense ) to deploy WebLogic
Cluster on the (Intel) Blade HW. The question is, actually, caused by the fact
that the Blade is totally redundant and load-balanced HW where the requests are
managed by a Big-IP module ( and redirected to the IPs on the internal Blade Cassettes
One of possible solutions, we discuss now, is "either-or", i.e. let's discard
the App.Server cluster and use the HW cluster. This might work for the request
load balance but we loose all other, out-of-the-box, cluster features like session,
EJB, JNDI and so on failover and balance features.
Any notes with this regard will be greatly appreciated.
Thanks, - Michael
P.S. I repeated the same question om "cluster" Newsgroup but have not seen any
responds so far.

It sounds like you're getting request routing and fail-over in front of
WLS with the Big-IP. Typically people would enable WLS clustering to
get replicated HTTP sessions in an environment like this.
-- Rob
Michael Poulin wrote:
Hi, I am looking for recommendations on how ( if it makes sense ) to deploy WebLogic
Cluster on the (Intel) Blade HW. The question is, actually, caused by the fact
that the Blade is totally redundant and load-balanced HW where the requests are
managed by a Big-IP module ( and redirected to the IPs on the internal Blade Cassettes
One of possible solutions, we discuss now, is "either-or", i.e. let's discard
the App.Server cluster and use the HW cluster. This might work for the request
load balance but we loose all other, out-of-the-box, cluster features like session,
EJB, JNDI and so on failover and balance features.
Any notes with this regard will be greatly appreciated.
Thanks, - Michael
P.S. I repeated the same question om "cluster" Newsgroup but have not seen any
responds so far.

Weblogic Integration Interview Questions and Answers

Can some one send me WebLogic Integration interview questions and answers to [email protected] and [email protected]
Thank you.

hi all,
can any one help us how to get or retrieve DataSource Names in weblogic using java code.
it is very urgent. please copy the java code here.
Somu :)

No communication between the two nodes in weblogic cluster

Hi All,
We have installed weblogic cluster in our environment(LINUX 64-Redhat.5).On one node admin server ,managed server1,on second node we have managed server2.When we try to deploy application on one node it is not getting reflected in othe node.We have ran datagram test to check communication between 2 node.
Here we observed that listener and pulisher are picking wrong IPs not the server Ips.
can any one explain why and what is the problem.
thanks,
sudheer.

Hi Sudheer,
While performing the datagram test you mention the ports and ip so I am not sure how they are picking wrong ip and port. Follow the instructions to perform the test http://coherence.oracle.com/display/COH35UG/Performing+a+Datagram+Test+for+Network+Performance
Re the deployments, you need to ensure that multicast is enabled in your environment and both your managed server are in the same subnet otherwise you need to specify WKA for unicast communication. I am assuming that you are building SOA infrastructure as it internally uses Coherence for deploying applications and you can follow the instructions http://download.oracle.com/docs/cd/E15523_01/core.1111/e12036/extend_soa.htm#CHDEAFJH else use the intructions as mentioned here http://download.oracle.com/docs/cd/E17904_01/web.1111/e13709/features.htm
Hope this helps!
Cheers,
NJ

Weblogic server License infromation

I have the Weblogic server 9.2 version License,
Now Should I have to purchase new License for the *9.2 MP2 ?*
I have the License for the 9.2 , but I do not have the License for MP2, From where can I get the same ?
should I go for the ,
BEA WebLogic Server Advantage Edition
or
BEA WebLogic Server Premium Edition
or
BEA WebLogic Server Mid-Market Edition
What the difference between , above 3 edition ? which one to consider for Development / UAT / PRODUCTION Environment ?
Thanks,
Edited by: user10511751 on Feb 27, 2009 10:57 AM
Edited by: user10511751 on Feb 27, 2009 11:00 AM

Hello Experts,
Is there any forum I can get the answer of following,
1) I have Weblogic 9.2 License , How to get the 9.2 MP2 ?
2) Weblogic One license can be used on one machine or it can be used on multiple machines ?
3) Is there any time limitation of Weblogic Licenses ?
What the difference between.
BEA WebLogic Server Advantage Edition
or
BEA WebLogic Server Premium Edition
or
BEA WebLogic Server Mid-Market Edition
For Documentum Web Application Is any one have Idea about the which one Edition of Weblogic is supported or used ? I have to purchase Weblogic License.
Thanks,

WebLogic Cluster License Question

Similar Messages

Maybe you are looking for