No communication between the two nodes in weblogic cluster
Hi All,
We have installed weblogic cluster in our environment(LINUX 64-Redhat.5).On one node admin server ,managed server1,on second node we have managed server2.When we try to deploy application on one node it is not getting reflected in othe node.We have ran datagram test to check communication between 2 node.
Here we observed that listener and pulisher are picking wrong IPs not the server Ips.
can any one explain why and what is the problem.
thanks,
sudheer.
Hi Sudheer,
While performing the datagram test you mention the ports and ip so I am not sure how they are picking wrong ip and port. Follow the instructions to perform the test http://coherence.oracle.com/display/COH35UG/Performing+a+Datagram+Test+for+Network+Performance
Re the deployments, you need to ensure that multicast is enabled in your environment and both your managed server are in the same subnet otherwise you need to specify WKA for unicast communication. I am assuming that you are building SOA infrastructure as it internally uses Coherence for deploying applications and you can follow the instructions http://download.oracle.com/docs/cd/E15523_01/core.1111/e12036/extend_soa.htm#CHDEAFJH else use the intructions as mentioned here http://download.oracle.com/docs/cd/E17904_01/web.1111/e13709/features.htm
Hope this helps!
Cheers,
NJ
Similar Messages
-
Have a G-5 & Hp 2610. Help me to regain communication between the two?
My G5 and HP Photosmart were just fine until I downloaded Internet Explorer
and an upgrade of Adobe 7. Now the computer doesn't talk to the printer. Reinstallation of the printer driver now tells me I need admin permission, but I am the admin. I'm so stuck and desparate.Hi, cracker -
Welcome to Apple's Discussions.
This is the OS 9 forum. Since no G5 can boot to OS 9, you may get quicker, more knowledgeable responses if you repost your question in one of the appropriate -
G5 forums - http://discussions.apple.com/category.jspa?categoryID=108
OSX forums:
OSX 10.3 - http://discussions.apple.com/category.jspa?categoryID=161
OSX 10.4 - http://discussions.apple.com/category.jspa?categoryID=160 -
Oracle RAC performance Suddenly terminates on one of the two node cluster
I have a strange problem that happens frequently from time to time when My M400 Machine which is a part of two node RAC cluster goes down suddenly
I tried so many times to understand what's the cause behind that but when I read the logs there are so many messages related to the Oracle RAC which I don't have any experience or knowledge about so I hope I can find here any one who can explain to me these log messages knowing that they are always the same
Jun 18 08:30:00 kfc-rac1 sendmail[17709]: [ID 702911 mail.crit] My unqualified host name (kfc-rac1) unknown; sleeping for retry
Jun 18 08:31:00 kfc-rac1 sendmail[17709]: [ID 702911 mail.alert] unable to qualify my own domain name (kfc-rac1) -- using short name
Jun 18 11:44:15 kfc-rac1 iscsi: [ID 454097 kern.notice] NOTICE: unrecognized ioctl 0x403
Jun 18 11:44:15 kfc-rac1 scsi: [ID 243001 kern.warning] WARNING: /pseudo/fcp@0 (fcp0):
Jun 18 11:44:15 kfc-rac1 Invalid ioctl opcode = 0x403
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <bin/rac_udlm_monitor_stop> for resource <rac-udlm-rs>, resource group <rac-fw-rg>, node <kfc-rac1
, timeout <300> secondsJun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <bin/rac_framework_monitor_stop> for resource <rac-fw-rs>, resource group <rac-fw-rg>, node <kfc-r
ac1>, timeout <3600> seconds
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <bin/rac_svm_monitor_stop> for resource <rac-svm-rs>, resource group <rac-fw-rg>, node <kfc-rac1>,
timeout <300> seconds
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <scal_dg_monitor_stop> for resource <scal-racdg-rs>, resource group <scal-racdg-rg>, node <kfc-rac
1>, timeout <300> seconds
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <scal_mountpoint_monitor_stop> for resource <racfs-mntpnt-rs>, resource group <racfs-mntpnt-rg>, n
ode <kfc-rac1>, timeout <300> seconds
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <bin/rac_framework_monitor_stop> completed successfully for resource <rac-fw-rs>, resource group <rac-fw-rg>
, node <kfc-rac1>, time used: 0% of timeout <3600 seconds>
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <bin/rac_udlm_monitor_stop> completed successfully for resource <rac-udlm-rs>, resource group <rac-fw-rg>, n
ode <kfc-rac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <bin/rac_svm_monitor_stop> completed successfully for resource <rac-svm-rs>, resource group <rac-fw-rg>, nod
e <kfc-rac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <bin/rac_udlm_stop> for resource <rac-udlm-rs>, resource group <rac-fw-rg>, node <kfc-rac1>, timeo
ut <300> seconds
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <scal_dg_monitor_stop> completed successfully for resource <scal-racdg-rs>, resource group <scal-racdg-rg>,
node <kfc-rac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <scal_mountpoint_monitor_stop> completed successfully for resource <racfs-mntpnt-rs>, resource group <racfs-
mntpnt-rg>, node <kfc-rac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <scal_mountpoint_postnet_stop> for resource <racfs-mntpnt-rs>, resource group <racfs-mntpnt-rg>, n
ode <kfc-rac1>, timeout <300> seconds
Jun 18 17:09:41 kfc-rac1 SC[SUNW.rac_udlm.rac_udlm_stop]: [ID 854390 daemon.notice] Resource state of rac-udlm-rs is changed to offline. Note that RAC framework will not be stopped by STOP me
thod.
Jun 18 17:09:41 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <bin/rac_udlm_stop> completed successfully for resource <rac-udlm-rs>, resource group <rac-fw-rg>, node <kfc
-rac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:42 kfc-rac1 samfs: [ID 320134 kern.notice] NOTICE: SAM-QFS: racfs: Initiated unmount filesystem: vers 2
Jun 18 17:09:43 kfc-rac1 samfs: [ID 522083 kern.notice] NOTICE: SAM-QFS: racfs: Completed unmount filesystem: vers 2
Jun 18 17:09:43 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <scal_mountpoint_postnet_stop> completed successfully for resource <racfs-mntpnt-rs>, resource group <racfs-
mntpnt-rg>, node <kfc-rac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:43 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <scal_dg_postnet_stop> for resource <scal-racdg-rs>, resource group <scal-racdg-rg>, node <kfc-rac
1>, timeout <300> seconds
Jun 18 17:09:43 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <scal_dg_postnet_stop> completed successfully for resource <scal-racdg-rs>, resource group <scal-racdg-rg>,
node <kfc-rac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:43 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <bin/rac_svm_stop> for resource <rac-svm-rs>, resource group <rac-fw-rg>, node <kfc-rac1>, timeout
<300> seconds
Jun 18 17:09:43 kfc-rac1 SC[SUNW.rac_svm.rac_svm_stop]: [ID 854390 daemon.notice] Resource state of rac-svm-rs is changed to offline. Note that RAC framework will not be stopped by STOP metho
d.
Jun 18 17:09:43 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <bin/rac_svm_stop> completed successfully for resource <rac-svm-rs>, resource group <rac-fw-rg>, node <kfc-r
ac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:43 kfc-rac1 Cluster.RGM.global.rgmd: [ID 224900 daemon.notice] launching method <bin/rac_framework_stop> for resource <rac-fw-rs>, resource group <rac-fw-rg>, node <kfc-rac1>, ti
meout <300> seconds
Jun 18 17:09:43 kfc-rac1 SC[SUNW.rac_framework.rac_framework_stop]: [ID 854390 daemon.notice] Resource state of rac-fw-rs is changed to offline. Note that RAC framework will not be stopped by
STOP method.
Jun 18 17:09:43 kfc-rac1 Cluster.RGM.global.rgmd: [ID 515159 daemon.notice] method <bin/rac_framework_stop> completed successfully for resource <rac-fw-rs>, resource group <rac-fw-rg>, node <
kfc-rac1>, time used: 0% of timeout <300 seconds>
Jun 18 17:09:44 kfc-rac1 root: [ID 702911 user.error] Oracle CRSD 3932 set to stop
Jun 18 17:09:44 kfc-rac1 root: [ID 702911 user.error] Oracle CRSD 3932 shutdown completed
Jun 18 17:09:44 kfc-rac1 root: [ID 702911 user.error] Oracle EVMD set to stop
Jun 18 17:09:44 kfc-rac1 root: [ID 702911 user.error] Oracle CSSD being stopped
Jun 18 17:09:45 kfc-rac1 xntpd[980]: [ID 866926 daemon.notice] xntpd exiting on signal 15
Jun 18 17:09:45 kfc-rac1 ip: [ID 646971 kern.notice] ip_create_dl: hw addr length = 0
Jun 18 17:09:45 kfc-rac1 pppd[516]: [ID 702911 daemon.notice] Connection terminated.
Jun 18 17:09:47 kfc-rac1 pppd[9462]: [ID 860527 daemon.notice] pppd 2.4.0b1 (Sun Microsystems, Inc.) started by root, uid 0
Jun 18 17:09:47 kfc-rac1 pppd[9462]: [ID 702911 daemon.notice] Connect: sppp0 <--> /dev/dm2s0
Jun 18 17:09:47 kfc-rac1 rpc.metamedd: [ID 702911 daemon.error] Terminated
Jun 18 17:09:48 kfc-rac1 inetd[482]: [ID 702911 daemon.warning] inetd_offline method for instance svc:/network/rpc/scrcmd:default is unspecified. Taking default action: kill.
Jun 18 17:09:48 kfc-rac1 inetd[482]: [ID 702911 daemon.warning] inetd_offline method for instance svc:/network/rpc/metacld:default is unspecified. Taking default action: kill.
Jun 18 17:09:49 kfc-rac1 inetd[482]: [ID 702911 daemon.warning] inetd_offline method for instance svc:/network/rpc/scadmd:default is unspecified. Taking default action: kill.
Jun 18 17:09:50 kfc-rac1 pppd[9462]: [ID 702911 daemon.notice] local IP address 192.168.224.2
Jun 18 17:09:50 kfc-rac1 pppd[9462]: [ID 702911 daemon.notice] remote IP address 192.168.224.1
Jun 18 17:09:50 kfc-rac1 cl_eventlogd[1554]: [ID 247336 daemon.error] Going down on signal 15.
Jun 18 17:09:52 kfc-rac1 ip: [ID 372019 kern.error] ipsec_check_inbound_policy: Policy Failure for the incoming packet (not secure); Source 192.168.224.001, Destination 192.168.224.002.
*Jun 18 17:09:56 kfc-rac1 ip: [ID 646971 kern.notice] ip_create_dl: hw addr length = 0*
*Jun 18 17:09:56 kfc-rac1 pppd[9462]: [ID 702911 daemon.notice] Connection terminated.*
*Jun 18 17:09:56 kfc-rac1 Cluster.PNM: [ID 226280 daemon.notice] PNM daemon exiting.*
*Jun 18 17:09:57 kfc-rac1 pseudo: [ID 129642 kern.info] pseudo-device: tod0*
*Jun 18 17:09:57 kfc-rac1 genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0*
*Jun 18 17:09:57 kfc-rac1 pseudo: [ID 129642 kern.info] pseudo-device: pm0*
*Jun 18 17:09:57 kfc-rac1 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0*
*Jun 18 17:09:57 kfc-rac1 rpc.metad: [ID 702911 daemon.error] Terminated*
Jun 18 17:10:01 kfc-rac1 syslogd: going down on signal 15
*Jun 18 17:10:07 kfc-rac1 rpcbind: [ID 564983 daemon.error] rpcbind terminating on signal.*
*Jun 18 17:10:32 kfc-rac1 Cluster.RGM.fed: [ID 831843 daemon.notice] SCSLM thread WARNING pools facility is disabled*
*Jun 18 17:10:40 kfc-rac1 genunix: [ID 672855 kern.notice] syncing file systems...*
*Jun 18 17:10:40 kfc-rac1 genunix: [ID 904073 kern.notice] done*
Jun 19 14:20:12 kfc-rac1 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.10 Version Generic_141444-09 64-bit
Jun 19 14:20:12 kfc-rac1 genunix: [ID 943908 kern.notice] Copyright 1983-2009 Sun Microsystems, Inc. All rights reserved.
Jun 19 14:20:12 kfc-rac1 Use is subject to license terms.
Jun 19 14:20:12 kfc-rac1 genunix: [ID 678236 kern.info] Ethernet address = 0:21:28:2:21:b2
Thanks in advance for all of you
your response is highly appreciatedHi I have checked the interconnect between the two nodes and it's as follow
ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
bge0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 10.1.100.126 netmask ffffff00 broadcast 10.1.100.255
groupname sc_ipmp0
ether 0:14:4f:3a:6c:19
bge0:1: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 2
inet 10.1.100.127 netmask ffffff00 broadcast 10.1.100.255
bge0:2: flags=1040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4> mtu 1500 index 2
inet 10.1.100.140 netmask ffffff00 broadcast 10.1.100.255
bge1: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 6
inet 172.16.0.129 netmask ffffff80 broadcast 172.16.0.255
ether 0:14:4f:3a:6c:1a
nxge0: flags=9040843<UP,BROADCAST,RUNNING,MULTICAST,DEPRECATED,IPv4,NOFAILOVER> mtu 1500 index 3
inet 10.1.100.128 netmask ffffff00 broadcast 10.1.100.255
groupname sc_ipmp0
ether 0:21:28:d:c9:8e
nxge1: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 5
inet 172.16.1.1 netmask ffffff80 broadcast 172.16.1.127
ether 0:21:28:d:c9:8f
e1000g1: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 4
inet 172.16.1.129 netmask ffffff80 broadcast 172.16.1.255
ether 0:15:17:81:15:c3
clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1500 index 7
inet 172.16.4.1 netmask fffffe00 broadcast 172.16.5.255
ether 0:0:0:0:0:1
sppp0: flags=10010008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4,FIXEDMTU> mtu 1500 index 8
inet 192.168.224.2 --> 192.168.224.1 netmask ffffff00
ether 0:0:0:0:0:0
root@kfc-rac1 #
and it's direct attached between both nodes interfaces
back to back
and about the status of the hba cards here is it as well
fcinfo hba-port -l
HBA Port WWN: 2100001b3284c042
OS Device Name: /dev/cfg/c1
Manufacturer: QLogic Corp.
Model: 375-3355-02
Firmware Version: 05.01.00
FCode/BIOS Version: BIOS: 1.24; fcode: 1.24; EFI: 1.8;
Serial Number: 0402R00-0844647023
Driver Name: qlc
Driver Version: 20090519-2.31
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 4Gb
Node WWN: 2000001b3284c042
Link Error Statistics:
Link Failure Count: 0
Loss of Sync Count: 0
Loss of Signal Count: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
HBA Port WWN: 2100001b321c462b
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3355-02
Firmware Version: 05.01.00
FCode/BIOS Version: BIOS: 1.24; fcode: 1.24; EFI: 1.8;
Serial Number: 0402R00-0844646557
Driver Name: qlc
Driver Version: 20090519-2.31
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 4Gb
Node WWN: 2000001b321c462b
Link Error Statistics:
Link Failure Count: 0
Loss of Sync Count: 0
Loss of Signal Count: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
HBA Port WWN: 2100001b32934b3c
OS Device Name: /dev/cfg/c3
Manufacturer: QLogic Corp.
Model: 375-3294-01
Firmware Version: 05.01.00
FCode/BIOS Version: BIOS: 2.2; fcode: 2.1; EFI: 2.0;
Serial Number: 0402R00-0947745866
Driver Name: qlc
Driver Version: 20090519-2.31
Type: N-port
State: online
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: 4Gb
Node WWN: 2000001b32934b3c
Link Error Statistics:
Link Failure Count: 0
Loss of Sync Count: 0
Loss of Signal Count: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
HBA Port WWN: 2101001b32b34b3c
OS Device Name: /dev/cfg/c4
Manufacturer: QLogic Corp.
Model: 375-3294-01
Firmware Version: 05.01.00
FCode/BIOS Version: BIOS: 2.2; fcode: 2.1; EFI: 2.0;
Serial Number: 0402R00-0947745866
Driver Name: qlc
Driver Version: 20090519-2.31
Type: unknown
State: offline
Supported Speeds: 1Gb 2Gb 4Gb
Current Speed: not established
Node WWN: 2001001b32b34b3c
Link Error Statistics:
Link Failure Count: 0
Loss of Sync Count: 0
Loss of Signal Count: 0
Primitive Seq Protocol Error Count: 0
Invalid Tx Word Count: 0
Invalid CRC Count: 0
root@kfc-rac1 #
In addition here is the ocssd log file as well
http://www.4shared.com/file/Txl9DqLW/log_25155156.html?
you'll find on the lines for the dates in which this issue happens
look at 2012-06-09
2012-06-18
2012-06-21
you'll see something related to the voting disk
it suddenly becomes unavailable which causes the problem
thanks a lot for your help
I'm waiting for your recommendation
hope these logs gives more look for the problem
Thanks in advance :) -
Hello Apple Community,
Can I backup two devices (with different documents) to one iCloud account?
For example: iPad Air and iPhone 5, not everything is synced between the two, but I would like to backup each (seperately in the cloud). Is this possible?
This way when I change from an old ipad to a new, I can restore with the ipad backup, and when I change from an old iphone to a new, I can restore from the
iphone backup.
Thank you in advance!Terminology check here. Do you really mean a "CD"? There's a difference in Cloud behavior between content from a physical CD you ripped (which only has Cloud content if you have iTunes Match) and an "album" you bought from the iTunes Store.
Read references for Home Sharing.
iTunes: How to share music and video - http://support.apple.com/kb/HT2688 - about Music Sharing and Home Sharing
Home Sharing Support page - http://www.apple.com/support/homesharing/
iOS: Setting up Home Sharing on your device - http://support.apple.com/kb/ht4557 - "With Home Sharing in iOS 4.3 or later, you can stream your entire iTunes library over your home Wi-Fi network from your Mac or PC right to your iPhone, iPad, or iPod touch."
The above can get pretty complicated. You are probably best off by syncing both devices to a single library and/or updating the libraries on both computers to have the same content. -
Communication between the primary server the gateway server
hallo
Can I set the directional communication between the primary server the gateway server, so it feels by the following example?
And if so how?
Agent
à GW
ß GW
ß MS
*Agent communicates with GW1 and reported it
*GW SEND report to GW2
*GW2 Send the the data to MS
thanks
<o:p></o:p>
אם תגובתי פתרה את בעייתך - לחץ/י, על "סמן כתשובה" ליד סימן ה V הירוק.Hi,
As far as I know, Gateways dont talk to each other. Why you need two GW, with one GW and report to your management servers, this way should work.
Here is a similar thread for your reference:
https://social.technet.microsoft.com/Forums/systemcenter/en-US/323d5aab-bad4-4c23-b096-27a62757ae31/communications-between-2-gateway-servers-and-2-ms?forum=operationsmanagerdeployment
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] -
How to sync the data between the two iSCSI target server
Hi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
ThanksHi experts:
I have double HP dl380g8 server, i plan to install the server 2012r2 iSCSI target as storage, i know the iSCSI storage can setup as high ability too, but after some research i doesn't find out how to sync the data between the two iSCSI target server, can
any body help me?
Thanks
There are basically three ways to go:
1) Get compatible software. Microsoft iSCSI target cannot do what you want out-of-box but good news third-party software (there are even free versions with a set of limitations) can do what you want. See:
StarWind Virtual SAN [VSAN]
http://www.starwindsoftware.com/native-san-for-hyper-v-free-edition
DataCore SANxxx
http://datacore.com/products/SANsymphony-V.aspx
SteelEye DataKeeper
http://us.sios.com/what-we-do/windows/
All of them do basically the same: mirror set of LUs between Windows hosts to emulate a high performance and fault tolerant virtual SAN. All of them do this in active-active mode (all nodes handle I/O) and at least StarWind and DataCore have sophisticated
distributed cache implementations (RAM and flash).
2) Get incompatible software (MSFT iSCSI target) and run it in generic Windows cluster. That would require you to have CSV so physical shared storage (FC or SAS, iSCSI obviously has zero sense as you can feed THAT iSCSI target directly to your block storage
consumers). This is doable and is supported by MSFS but has numerous drawbacks. First of all it's SLOW as a) MSFT target does no caching and even does not use file system cache (at all, VHDX it uses as a containers are opened and I/O-ed in a "pass-thru" mode)
b) it's only active-passive (one node will handle I/O @ a time with other one just doing nothing in standby mode) and c) long I/O route (iSCSI initiator -> MSFT iSCSI target -> clustered block back end). For reference see:
Configuring iSCSI Storage for High Availability
http://technet.microsoft.com/en-us/library/gg232621(v=ws.10).aspx
MSFT iSCSI Target Cluster
http://techontip.wordpress.com/2011/05/03/microsoft-iscsi-target-cluster-building-walkthrough/
3) Re-think what you do. Except iSCSI target from MSFT you can use newer technologies like SoFS (obviously faster but requires a set of a dedicated servers) or just a shared VHDX if you have a fault tolerant SAS or FC back end and want to spawn a guest VM
cluster. See:
Scale-Out File Servers
http://technet.microsoft.com/en-us/library/hh831349.aspx
Deploy a Guest Cluster Using a Shared Virtual Hard Disk
http://technet.microsoft.com/en-us/library/dn265980.aspx
With Windows Server 2012 R2 release virtual FC and clustered MSFT target are both really deprecated features as shared VHDX is both faster and easier to setup and use if you have FC or SAS block back end and need to have guest VM cluster.
Hope this helped a bit :)
StarWind VSAN [Virtual SAN] clusters Hyper-V without SAS, Fibre Channel, SMB 3.0 or iSCSI, uses Ethernet to mirror internally mounted SATA disks between hosts. -
What's the difference between the two IE11 installers listed below?
Hello,
What is the difference between these two IE-11 downloads (image below)? One is 28MB and one is 54MB. I am having a lot of post-installation issues with the 54MB installer (i.e. opens blank pages, can't access a simple page like google, Windows search stops
indexing). When I install the 28MB download, (so far) I don't have any issues. Since the 28MB installation works, it sounds like my desision is easy but I would still like to know the difference between the two. BTW, the quick install is only 2MB, so I know
I don't have the quick install.
Any help would be appriciated, thank you in advance.
Sorry, for the spacing on the links below. This system won't let me add 'real' links until my account is varified.
28MB Installer Link
microsoft . com / en-us / download / details.aspx?id=40902
54MB Installer Link
windows . microsoft . com / en-us / internet-explorer / ie-11-worldwide-languagesHi,
In my environment, they are the same size:
Alex Zhao
TechNet Community Support -
I have purchased a new iPad and given my old one to my husband. How do I change the Apple ID over to him. We are having continuous confusion between the two iPads
Hi Marg42,
Thanks for visiting Apple Support Communities.
First, your husband can create his own Apple ID via the web, computer, or iPad, if he hasn't already:
My Apple ID
https://appleid.apple.com
iTunes: How to set up an Apple ID within iTunes
http://support.apple.com/kb/ht2731
Next, he can sign out of the Apple services that are currently using your Apple ID on your old iPad, and sign in with his own.
This article has instructions for doing so for specific Apple services:
Apple ID: What to do after you change your Apple ID
http://support.apple.com/kb/HT5796
Alternately, he can erase the device and set it up as new using the steps in this article:
iOS: How to back up your data and set up your device as a new device
http://support.apple.com/kb/ht4137
Best Regards,
Jeremy -
We have 2 ITunes libraries on one computer. Is there a way to share movies, music, etc. between the two libraries?
To your second question, probably the easiest way is to set up another user account on your machine. Then when that user opens iTunes, it will be a new library (empty) that they can put anything they want into, and not corrupt your library.
With another user account, they can also customize their own desktop photo, desktop icons, etc. so lots of benefits doing it that way. Works out great for me and my 13 year old daughter so I don't have to see the latest Emo band hearthrob's face on my desktop.
Patrick -
Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID?
Can i set up my iPad and iPod to use iMessage between the two devices with the same Apple ID? SO i could iMessage if out from my iPod to my iPad at home to be viewed by a family member?
Look into using Apple Configurator. It's the easiest way to "reimage" and Manage iPads that I know of right now.
http://itunes.apple.com/us/app/apple-configurator/id434433123?mt=12
Also, look into using the Educational Volume Purchase Program, if you have not already done so.
http://www.apple.com/education/volume-purchase-program/ -
I have two IPhones and one IPad all with the same Apple ID. I can call facetime between the two IPhones, but I cannot call the IPAD from either of the IPhones and when I call my IPhone from the IPad it rings my wife's IPhone after briefly calling mine.
Each device needs a separate address. Use an email address (gmail.com) on the iPad.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
Cheers, Tom -
Just set up my ipad3 using my same apple id and password that I used for my iPad 2. I want to FaceTime between the two. Do I need to change one of the iPad settings to do so???
Settings > Facetime > Apple ID > tap it and log out, log in with other Apple ID
-
My daugher and I both have an iPhone and we have shared my apple ID. She just replaced her phone and now our contacts are syncing -- and we don't want that. How do I differentiate between the two phones?
Is the same Apple iCloud account being accessed on each iPhone?
-
Communication between the DNS/DHCP Manager and OES Server
No communication between the DNS/DHCP Manager Console and OES server (status,start,stop)
The screenshot shows the tab "DHCP (OES Linux)" in the DNS / DHCP Manager console
in the bottom of the image it shows the state of the DHCP servers.
allDHCP.JPG
The dhcp service is started on all these servers
You can see that the status is known only for four servers.
The button "start/stop DHCP service" works fine on this servers and
the dhcp service can be canceled and also restarted
But the status of the "dhcp service" is not recognized for all the other DHCP servers
and so we can not start or stop dhcp service on these servers.
All servers were installed at different times (last three years) with OES11 and
are upgraded to OES11SP2 with all patches.
The server keto (DHCP_keto) is a new installation OES11SP2 few days ago.
All OES servers were set up identically from me. LDAP, LUM, DMS, DHCP works fine.
Which service on the OES server is responsible for
communication (status indicator) between the DNS/DHCP Manager and the OES serve?
How the status query is performed by the DNS/DHCP Manager?
How can I test the communication to the server on the client (console)?
Which configurationfiles I should be compare on the server?
Thanks in advance
Gernotgernot,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://www.novell.com/support and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Forums Team
http://forums.novell.com -
Communication between the computer and the disc drive failed
The disc can’t be burned because because communication between the computer and the disc drive failed (error code 0x80020022). This computer has been out of the box for less than a month and this has been a growing problem.
My problem was FIXED at the apple store..... there was something wrong in the system preferences and the genius deleted something that recreated it's self. Surely enough we we're able to burn a 600 mb dmg of nothing onto a few test disks. For anyone having this issue...it's NOT The media, it's some configuration issue within the computer's preferences. I'm telling you all to take your machine to the nearest apple store and have them fix it, if your machine is still under warranty the fix is free. There was no hardware issue, so the optical drive was not replaced.
Maybe you are looking for
-
How do i edit numbers in the recent call list?
I'm using iOS 5.0.1 on the 4s currently Can anyone tell me how to edit the contact numbers in the recent call list? Eg. I would need to add a certain prefix in front of the number to return an overseas call in my recent call list. I tried to copy n p
-
Iphone3g without apps, since all of them are for ios 5 now...
Is there any way to download OLD apps versions? cause all the ones i download are not compatible with the 3g. I have an empy 3g ihpone....
-
hi guru. in sap plm projects is this necessary , to generate the reports,scripts. what is exactly sap plm projects,give some idea briefly.because just recently i got offer for working in sap plm development projects. help me. thanks& regards subhasis
-
HSL Tuner not working Premiere Elements 11
Hello... After dropping the HSL Tuner onto the selected video clip nothing happens. If I try to click on hue, saturation or luminance I get no response. No slidebar - no options whatsoever. I need to desaturate one color in the video without alter
-
Ok...here's my senario. I need a JTextArea to take up as much space as needed without using a vertical or horizontal scrollbar I do have a constant width in pixels (500 in most cases) so it should expand by adding more rows. This JTextArea is in a Bo