Weblogic J2EE agent 2.2 performance issue
Hi All,
Are these known performance issues with J2EE Agent 2.2 for Weblogic 8sp5?
Is there a document that tells about performance tuning of J2EE Agent 2.2 for Weblogic server?
We are doing the load testing with AM 7.0 and Weblogic J2EE Agent. We found that AM7.0 with Apache Policy agent works fine in our load test. Our Application's performance without the J2EE agent is good. The moment we add J2EE Agent for weblogic to the equation, it goes south...
Any help will be appreciated,
Thanks,
Vivek
Hi All,
Are these known performance issues with J2EE Agent 2.2 for Weblogic 8sp5?
Is there a document that tells about performance tuning of J2EE Agent 2.2 for Weblogic server?
We are doing the load testing with AM 7.0 and Weblogic J2EE Agent. We found that AM7.0 with Apache Policy agent works fine in our load test. Our Application's performance without the J2EE agent is good. The moment we add J2EE Agent for weblogic to the equation, it goes south...
Any help will be appreciated,
Thanks,
Vivek
Similar Messages
-
WebLogic 10.3.4 Adminserver Performance Issues - Clustered Environment.
I am running WL 10.3.4 64 bit version on 64 bit hardware (blade serves) running Solaris 10 and I have the servers setup in a cluster. There are 3 machines are part of the cluster.
Managed Server1 is on Blade Server 1
Managed Server2 is on Blade Server 2
Managed Server3 is on Blade Server 3
We have about 20 different clusters setup and 60 servers across those 20 clusters.
The adminserver runs on a separate box (not a blade server). Tasks that do NOT involve the servers or deployments tabs are relatively fast however, when I go to the servers or deployments tab, and to some extent the clusters tab, the response is very slow.
For example, I am running WL 10.3.0 on less robust hardware. I installed the patch that Oracle published to resolve this particular issue. We have a similar number of clusters and servers on in that environment (3 severs to a cluster). The servers tab responds in 10 seconds.
In WL 10.3.4, the servers and deployments tabs take about 45 - 60 seconds to respond. This adds a LOT of overhead to doing any server or deployment related tasks.
I realize that the admin server has to query all the managed servers but performance in 10.3.4 is much worse than WL 10.3.0 with the performance patch.
Has anyone else run into similar performance issues with the WL 10.3.4 ADMIN Console running in a clustered environment? If so, does anyone have any suggestions to help improve performance.
I also run a WL 10.3.4 instance in a single server environment and the servers and deployments tabs respond withing 10 seconds (very fast). It is just in a clustered environment.
Regards,
Markhi Mark, it's a very interesting story, any follow-up? I would be curious to know the reason for the delay...
-
Performance Issues in IC Agent Search - Category and / or Status search
Hi All
We are encountering a serious performance issue in SAP CRM 7.0 WebUI for IC Agent Inbox Search, when using the provided selection criteria viz u2013 status, category etc.
When we click on search , we are getting a timeout for the same.
As per ST22 analysis, the timeout is occurring due to the read on CRMD_ORDER_INDEX table where a sequential read is timing out.
A Custom Index has been created on the CRMD_ORDER_INDEX table for improving performance.
In ST22 the standard tips mention
"Dataset resulting from database access is too large".
and
"Database has unsuitable index. Check index generation".
We have done a database inconsistency check and no errors are appearing for the index.
We also did a rebuild index in RSANORA but that has not solved the issue.
Any pointers that could help solve / analyze the core issue would be very beneficial.
I have a feeling using APPEND HINTS to curtail the dataset should sovle the issue, however i am not a DB expert.
If u have any suggestions pls let me know.
Thanks
Ron.Hi Ron,
Are you getting the search result if you limit your search for a specific date or for a specific transaction number. If yes then i believe your Indexing is still not proper. There are few notes available for improving performance of agent inbox for CRM 7.0. Did you check those notes?
Thanks
Arun Kumar -
Error when deploying JDBC file data source for J2EE agent in weblogic
Hi ODI experts!
we're using ODI 11g and we've installed J2EE agents on weblogic. We need to configure a connection pool within weblogic for a file data source. Thus, we've added snpsFile.jar (that was shipped with ODI 10g...) to the weblogic config so that we can configure a JDBC connection to file.
As we validate the config, an error occurs (see below):
Obviously, driver is found but cannot be deployed.
####<4 août 2011 09 h 39 CEST> <Error> <Deployer> <ppdlodi001> <SRVPPDODI_001> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <c53bfd6260db74bb:-485a441a:13193b42397:-7ffc-0000000000000027> <1312443551325> <BEA-149265> <Failure occurred in the execution of deployment request with ID '1312443550020' for task 'weblogic.deploy.configChangeTask.6'. Error is: 'weblogic.application.ModuleException: '
weblogic.application.ModuleException:
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:290)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1223)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:218)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.prepare(DeploymentReceiverCallbackDeliverer.java:41)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.callDeploymentReceivers(AwaitingContextUpdateCompletion.java:164)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.handleContextUpdateSuccess(AwaitingContextUpdateCompletion.java:66)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.contextUpdated(AwaitingContextUpdateCompletion.java:32)
at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.notifyContextUpdated(TargetDeploymentService.java:225)
at weblogic.deploy.service.internal.DeploymentService$1.run(DeploymentService.java:190)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused By: weblogic.common.ResourceException: com.sunopsis.jdbc.driver.file.a.i
at weblogic.jdbc.common.internal.ConnectionEnvFactory.createResource(ConnectionEnvFactory.java:263)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1193)
at weblogic.common.resourcepool.ResourcePoolImpl.makeResources(ResourcePoolImpl.java:1117)
at weblogic.common.resourcepool.ResourcePoolImpl.start(ResourcePoolImpl.java:244)
at weblogic.jdbc.common.internal.ConnectionPool.doStart(ConnectionPool.java:1110)
at weblogic.jdbc.common.internal.ConnectionPool.start(ConnectionPool.java:147)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:386)
at weblogic.jdbc.common.internal.ConnectionPoolManager.createAndStartPool(ConnectionPoolManager.java:326)
at weblogic.jdbc.module.JDBCModule.prepare(JDBCModule.java:254)
at weblogic.application.internal.flow.ModuleListenerInvoker.prepare(ModuleListenerInvoker.java:199)
at weblogic.application.internal.flow.DeploymentCallbackFlow$1.next(DeploymentCallbackFlow.java:508)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:149)
at weblogic.application.internal.flow.DeploymentCallbackFlow.prepare(DeploymentCallbackFlow.java:47)
at weblogic.application.internal.BaseDeployment$1.next(BaseDeployment.java:1223)
at weblogic.application.utils.StateMachineDriver.nextState(StateMachineDriver.java:41)
at weblogic.application.internal.BaseDeployment.prepare(BaseDeployment.java:367)
at weblogic.application.internal.SingleModuleDeployment.prepare(SingleModuleDeployment.java:43)
at weblogic.application.internal.DeploymentStateChecker.prepare(DeploymentStateChecker.java:154)
at weblogic.deploy.internal.targetserver.AppContainerInvoker.prepare(AppContainerInvoker.java:60)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.createAndPrepareContainer(ActivateOperation.java:208)
at weblogic.deploy.internal.targetserver.operations.ActivateOperation.doPrepare(ActivateOperation.java:98)
at weblogic.deploy.internal.targetserver.operations.AbstractOperation.prepare(AbstractOperation.java:217)
at weblogic.deploy.internal.targetserver.DeploymentManager.handleDeploymentPrepare(DeploymentManager.java:749)
at weblogic.deploy.internal.targetserver.DeploymentManager.prepareDeploymentList(DeploymentManager.java:1216)
at weblogic.deploy.internal.targetserver.DeploymentManager.handlePrepare(DeploymentManager.java:218)
at weblogic.deploy.internal.targetserver.DeploymentServiceDispatcher.prepare(DeploymentServiceDispatcher.java:160)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doPrepareCallback(DeploymentReceiverCallbackDeliverer.java:171)
at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.prepare(DeploymentReceiverCallbackDeliverer.java:41)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.callDeploymentReceivers(AwaitingContextUpdateCompletion.java:164)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.handleContextUpdateSuccess(AwaitingContextUpdateCompletion.java:66)
at weblogic.deploy.service.internal.statemachines.targetserver.AwaitingContextUpdateCompletion.contextUpdated(AwaitingContextUpdateCompletion.java:32)
at weblogic.deploy.service.internal.targetserver.TargetDeploymentService.notifyContextUpdated(TargetDeploymentService.java:225)
at weblogic.deploy.service.internal.DeploymentService$1.run(DeploymentService.java:190)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Thanks in advance for your help.
Fredd.Hi!
Some information: I found this website [http://gerardnico.com/doc/odi/webhelp/en/refmanual/connexion/jdbcdriversample.htm] explaining that the 'old' snpsFile.jar driver was deprecated and that a new one was existing... but I can't find it anywhere!
My questions are:
- Can the problem (original problem. See initial post) be due to driver version?
- Does someone know where to find this 'new' driver?
Thanks for your help.
Fredd.
Edited by: fredd2 on Aug 5, 2011 10:04 AM
Edited by: fredd2 on Aug 5, 2011 10:07 AM -
New weblogic cookie gets created - app is protected by SAM J2EE agent
All
We have installed J2EE agent 2.2 on Weblogic App server (8.1 SP6) fine..
We get authenitcated against access manager while accessing a weblogic app, however it seems that
we are going in a loop and a new weblogic session id is getting created every time
We have the AMfilter as the 1st filter .. etc... We have deployed the SampleApp etc fine in the past
We have checked the AMAgent.properties file etc..
The weblogic app is in the same domain as our SAM server and the cookie domain is set fine...
We can see that SAM cookie is used fine.. but it seems like the weblogic thinks its a new session
and creates a new session cookie all the time
Any ideas
ThanksWe got some new jar files for the agent and now the agent with the tomcat container is working as expected.
-
Performance Issues in weblogic managed server
Hi,
We are facing performance issues in our managed servers in weblogic domain and in logs it is showing this error continuously.
<Oct 2, 2013 10:39:27 AM MST> <Error> <WebLogicServer> <BEA-000337> <[STUCK] ExecuteThread: '47' for queue: 'weblogic.kernel.Default (self-tuning)' has been busy for "700" seconds working on the request "Workmanager: OIMMDBWorkManager, Version: 0, Scheduled=false, Started=true, Started time: 700360 ms
", which is more than the configured time (StuckThreadMaxTime) of "600" seconds. Stack trace:
Thread-294 "[STUCK] ExecuteThread: '47' for queue: 'weblogic.kernel.Default (self-tuning)'" <alive, suspended, blocked, priority=1, DAEMON> {
-- Blocked trying to get lock: java.io.PrintStream@41a53700[not locked]
java.io.PrintStream.println(PrintStream.java:755)
com.wyndham.operations.user.eventHandlers.PostCreateOperationsEventHandler.execute(PostCreateOperationsEventHandler.java:60)
oracle.iam.platform.kernel.impl.OrchProcessData.runPostProcessEvents(OrchProcessData.java:1225)
oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:665)
oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:268)
oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:810)
oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:971)
oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:665)
oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:268)
oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:810)
oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:880)
oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:552)
oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:665)
oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:268)
oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:815)
oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:843)
oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:97)
oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:99)
oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:52)
oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:60)
sun.reflect.GeneratedMethodAccessor1493.invoke(Unknown Source)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:575)
com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:309)
com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:86)
com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:102)
com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:151)
$Proxy460.onMessage(Unknown Source)
weblogic.ejb.container.internal.MDListener.execute(MDListener.java:518)
weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:467)
weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4638)
weblogic.jms.client.JMSSession.execute(JMSSession.java:4134)
weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3820)
weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
We have performed workload manager tuning in weblogic console as below.
The property ‘Maximum Threads Constraint’ of work managers OIMMDBWorkManager = 80 and OIMUIWorkManager = 20
Please suggest the solution.Hi,
If you look more closely at the STUCK Thread stack trace, you will notice that the thread is attempting to acquire a LOCK on the following Object monitor: java.io.PrintStream@41a53700. The native thread state is also in a BLOCKED state.
My primary recommendation is to generate a full JVM Thread Dump (next re-occurence) so we can identify the potential culprit Thread holding such lock. One more thing, please see if you have multiple snapshots of this thread 294?
I also recommend to review the following source code:
com.wyndham.operations.user.eventHandlers.PostCreateOperationsEventHandler.execute(PostCreateOperationsEventHandler.java:60)
Sharing the same Stream object in this case would trigger thread lock contention given java.io.PrintStream has built-in synchronization ex:
public void println(String x) {
synchronized (this) {
print(x);
newLine();
Regards,
P-H
http://javaeesupportpatterns.blogspot.com -
BEA Weblogic performance issue
Hi All,
We are using bea weblogic 10.2.
We have some performance issue in our production.
We face the proble like
1. Our bea query takes maxixmum cpu utilization in the oracle databse.
process are content upload, update, expiry and report fetching.
2. When we run BEA query for report it takes around 10 min to run and content count is around 70,000,
is this OK?
3. Some times we get Socket connection error.
4. Sometimes we get portal datasource connection pool error, currently it is set as 30.
5. Almost every process is slow.
Can anyone help me for optimization?
From BBA,
we idetified the query which is taking high CPU utilization..
SELECT
DISTINCT B.NODE_ID, B.NODE_VERSION_ID, B.CM_MODIFIED_DATE, B.MODIFIED_BY,B.VERSION_COMMENT,
B.LIFECYCLE_STATUS,A.OBJECT_CLASS_ID,A.REPOSITORY_NAME
FROM CMV_NODE A, CMV_NODE_VERSION B,(SELECT NODE_ID, MAX(CAST(NODE_VERSION_ID AS INTEGER)) NVI
FROM CMV_NODE_VERSION GROUP BY NODE_ID) A1, ( SELECT B.NODE_ID,B.NODE_VERSION_ID, B.CM_MODIFIED_DATE,
B.MODIFIED_BY, B.VERSION_COMMENT, B.LIFECYCLE_STATUS, A.OBJECT_CLASS_ID, A.REPOSITORY_NAME FROM CMV_NODE A,
CMV_NODE_VERSION B, CMV_NODE_VERSION_PROPERTY N1, CMV_PROPERTY P1, CMV_VALUE_V V1 WHERE A.NODE_ID = B.NODE_ID
AND B.NODE_ID = N1.NODE_ID AND B.NODE_VERSION_ID = N1.NODE_VERSION_ID AND N1.PROPERTY_ID = P1.PROPERTY_ID
AND P1.PROPERTY_ID = V1.PROPERTY_ID AND P1.PROPERTY_NAME = :1 AND (UPPER(V1.TEXT_VALUE) LIKE :2 ESCAPE :"SYS_B_0" )
UNION
SELECT B.NODE_ID, B.NODE_VERSION_ID, B.CM_MODIFIED_DATE, B.MODIFIED_BY, B.VERSION_COMMENT,
B.LIFECYCLE_STATUS, A.OBJECT_CLASS_ID, A.REPOSITORY_NAME FROM CMV_NODE A, CMV_NODE_VERSION B, CMV_NODE_
Edited by: Arvind Rai on Apr 13, 2010 12:49 PMIf your DB CPU is pegged, then anything that does db operations will take time (including some portal operations). If you take a thread dump you should be able to see them waiting on the DB
When we run BEA query for report it takes around 10 min to run and content count is around 70,000,No. If it causes your CPU to max out it isnt. However your content items arent that much, so what query are you running? You could always export and import just the content tables and run your queries on some other machine (Assuming this is the cause)
3. Some times we get Socket connection error.More information needed
4. Sometimes we get portal datasource connection pool error, currently it is set as 30.What is the error?
5. Almost every process is slow.If the DB is maxed this is what you should expect.
When is the query fired? Are your indexes created? I assume caching is not much good to you since these are reporting queries? -
Weblogic 8.1 SP4 on AIX Performance issues
We are currently facing big performance issues with our servers that are holding just a couple of applications. The server specs are:
System Model: IBM,7040-681
Processor Type: PowerPC_POWER4
Number Of Processors: 2
Processor Clock Speed: 1500 MHz
CPU Type: 64-bit
Kernel Type: 64-bit
Memory Size: 6144 MB
Good Memory Size: 6144 MB
Java version "1.4.2"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2)
Classic VM (build 1.4.2, J2RE 1.4.2 IBM AIX build ca142-20060824 (SR6) (JIT
enabled: jitc))
Is anybody aware of this kind of problems for Wl8.1+AIX?
Thanks,
JohannI am getting the same error as well
cannot load libary 'stackdump': java.lang.UnsatisfiedLinkError: no stackdump in java.library.path
I am creating a simple domain using the domain config wizard and I hope all the PATH and LD_LIBRARY_PATH are set by the default scripts. But I am still getting this error.
But Kill -3 <PID> works though!
Is is a know problem OR am I missing something?!
Bala -
Hi Everyone,
I have installed Weblogic Policy Agent in OpenAM. Followed the URL “http://openam.forgerock.org/openam-documentation/openam-doc-source/doc/agent-install-guide/index/chap-weblogic.html” to install the policy Agent.
I am using Oracle Weblogic server 10.3.5.0 to use deploy the .war file. Same Weblogic server used for Oracle Identity Manager 11.1.1.5.0.
In Weblogic Policy Agent post-installation steps need to select Agent Authenticator for the security Realm.
I have doubt here. Whether i want to create the *"new realm"* or i can use the existing realm *"myrealm"*? But , "myrealm" is consists the details of OIM.
I am thinking to create the new realm for openAM Weblogic policy Agent, if so what are the things i need to do create new realm for OpenAM.
Please suggest me on this.
Thanks & Regards,
KarthickHi Aaron;
I am trying to see if I can force the policy agent to be invoked on non-protected resources. The agent is in J2EE mode. The scenario that I have is the whole site is open and nothing is protected so I have to make the policy agent recognize requests for both protected and non protected resources. The other issue I have is that even if I create a cookie the policy agent doesn't maintain the session state since the requests are for unprotected resources. It (PA) doesn't "touch" the cookie since the requests didn't go through it.
Thanks, -
Performance issues with class loader on Windows server
We are observing some performance issues in our application. We are Using weblogic 11g with Java6 on a windows 2003 server
The thread dumps indicate many threads are waiting in queue for the native file methods:
"[ACTIVE] ExecuteThread: '106' for queue: 'weblogic.kernel.Default (self-tuning)'" RUNNABLE
java.io.WinNTFileSystem.getBooleanAttributes(Native Method)
java.io.File.exists(Unknown Source)
weblogic.utils.classloaders.ClasspathClassFinder.getFileSource(ClasspathClassFinder.java:398)
weblogic.utils.classloaders.ClasspathClassFinder.getSourcesInternal(ClasspathClassFinder.java:347)
weblogic.utils.classloaders.ClasspathClassFinder.getSource(ClasspathClassFinder.java:316)
weblogic.application.io.ManifestFinder.getSource(ManifestFinder.java:75)
weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
weblogic.application.utils.CompositeWebAppFinder.getSource(CompositeWebAppFinder.java:71)
weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
weblogic.utils.classloaders.MultiClassFinder.getSource(MultiClassFinder.java:67)
weblogic.utils.classloaders.CodeGenClassFinder.getSource(CodeGenClassFinder.java:33)
weblogic.utils.classloaders.GenericClassLoader.findResource(GenericClassLoader.java:210)
weblogic.utils.classloaders.GenericClassLoader.getResourceInternal(GenericClassLoader.java:160)
weblogic.utils.classloaders.GenericClassLoader.getResource(GenericClassLoader.java:182)
java.lang.ClassLoader.getResourceAsStream(Unknown Source)
javax.xml.parsers.SecuritySupport$4.run(Unknown Source)
java.security.AccessController.doPrivileged(Native Method)
javax.xml.parsers.SecuritySupport.getResourceAsStream(Unknown Source)
javax.xml.parsers.FactoryFinder.findJarServiceProvider(Unknown Source)
javax.xml.parsers.FactoryFinder.find(Unknown Source)
javax.xml.parsers.DocumentBuilderFactory.newInstance(Unknown Source)
org.ajax4jsf.context.ResponseWriterContentHandler.<init>(ResponseWriterContentHandler.java:48)
org.ajax4jsf.context.ViewResources$HeadResponseWriter.<init>(ViewResources.java:259)
org.ajax4jsf.context.ViewResources.processHeadResources(ViewResources.java:445)
org.ajax4jsf.application.AjaxViewHandler.renderView(AjaxViewHandler.java:193)
org.apache.myfaces.lifecycle.RenderResponseExecutor.execute(RenderResponseExecutor.java:41)
org.apache.myfaces.lifecycle.LifecycleImpl.render(LifecycleImpl.java:140)
On googling this seems to be an issue with java file handling on windows servers and I couldn't find a solution yet. Any recommendation or pointer is appreciatedHi shubhu,
I just analyzed your partial Thread Dump data, the problem is that the ajax4jsf framework ResponseWriterContentHandler triggers internally a new instance of the DocumentBuilderFactory; every time; triggering heavy IO contention because of Class loader / JAR file search operations.
Too many of these IO operations under heavy load will create excessive contention and severe performance degradation; regardless of the OS you are running your JVM on.
Please review the link below and see if this is related to your problem.. This is a known issue in JBOSS JIRA when using RichFaces / ajaxJSF.
https://issues.jboss.org/browse/JBPAPP-6166
Regards,
P-H
http://javaeesupportpatterns.blogspot.com/ -
Performance issues with the Vouchers index build in SES
Hi All,
We are currently performing an upgrade for: PS FSCM 9.1 to PS FSCM 9.2.
As a part of the upgrade, Client wants Oracle SES to be deployed for some modules including, Purchasing, Payables (Vouchers)
We are facing severe performance issues with the Vouchers index build. (Volume of data = approx. 8.5 million rows of data)
The index creation process runs for over 5 days.
Can you please share any information or issues that you may have faced on your project and how they were addressed?Check the following logs for errors:
1. The message log from the process scheduler
2. search_server1-diagnostic.log in /search_server1/logs directory
If the build is getting stuck while crawling then we typically have to increase the Java Heap size for the Weblogic instance for SES> -
Performance issues with Imac intel 2011 27 inch..
I have an 2011 imac 3,4 GHz Intel Core i7 with 16 GB 1333 MHz DDR3 RAM.
Since a few months i noticed performance issues with FCPX, where before it would run through video it shows sometimes the color ball. Now the computer is slow in starting up and shutting down also. Ran disk utility but to no avail. I am now considering reinstalling mavericks.
But I ran etrecheck.
here are the results, please who can help me? I use this computer to edit and about everything else.
copied:
Problem description:
slow start and slow quit of computer. Performance issues with fcpx and other programms.
EtreCheck version: 2.1.8 (121)
Report generated 6 maart 2015 21:49:31 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:7:46
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.78 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Western Digital Ext HDD 1021 2 TB
EFI (disk2s1) <not mounted> : 210 MB
datavideo (disk2s2) /Volumes/datavideo : 1.37 TB (133.89 GB free)
prive (disk2s3) /Volumes/prive : 627.23 GB (68.13 GB free) - 7 errors
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk3s1) <not mounted> : 315 MB
downloads (disk3s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk3s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Internal Memory Card Reader
Apple Computer, Inc. IR Receiver
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[loaded] com.avid.ApplicationManager.plist [Click for support]
[loaded] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.36 GB
downloads: Disk size: 249.18 GB Disk used: 110.84 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% Google Chrome
1% WindowServer
0% opendirectoryd
0% mds
0% dpd
Top Processes by Memory: ℹ️
206 MB mds_stores
172 MB com.apple.IconServicesAgent
155 MB Google Chrome
137 MB Dock
113 MB Google Chrome Helper
Virtual Memory Information: ℹ️
10.02 GB Free RAM
4.36 GB Active RAM
1.35 GB Inactive RAM
1.44 GB Wired RAM
1.24 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 6, 2015, 09:37:26 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hangProblem description:
disk problems
EtreCheck version: 2.1.8 (121)
Report generated 7 maart 2015 14:16:18 CET
Download EtreCheck from http://etresoft.com/etrecheck
Click the [Click for support] links for help with non-Apple products.
Click the [Click for details] links for more information about that line.
Hardware Information: ℹ️
iMac (27-inch, Mid 2011) (Technical Specifications)
iMac - model: iMac12,2
1 3.4 GHz Intel Core i7 CPU: 4-core
16 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1333 MHz ok
BANK 1/DIMM0
4 GB DDR3 1333 MHz ok
BANK 0/DIMM1
4 GB DDR3 1333 MHz ok
BANK 1/DIMM1
4 GB DDR3 1333 MHz ok
Bluetooth: Old - Handoff/Airdrop2 not supported
Wireless: en1: 802.11 a/b/g/n
Video Information: ℹ️
AMD Radeon HD 6970M - VRAM: 1024 MB
iMac 2560 x 1440
System Software: ℹ️
OS X 10.9.4 (13E28) - Time since boot: 0:19:51
Disk Information: ℹ️
WDC WD1001FALS-403AA0 disk1 : (1 TB)
EFI (disk1s1) <not mounted> : 210 MB
MacintoshHD2 (disk1s2) /Volumes/MacintoshHD2 : 999.86 GB (152.18 GB free)
APPLE SSD TS256C disk0 : (251 GB)
EFI (disk0s1) <not mounted> : 210 MB
MacintoshHD (disk0s2) / : 250.14 GB (62.97 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
HL-DT-STDVDRW GA32N
HGST HDS724040ALE640 disk2 : (4 TB)
EFI (disk2s1) <not mounted> : 210 MB
disk2s2 (disk2s2) <not mounted> : 4.00 TB
Boot OS X (disk2s3) <not mounted> : 134 MB - one error
HGST HDS724040ALE640 disk3 : (4 TB)
EFI (disk3s1) <not mounted> : 210 MB
disk3s2 (disk3s2) <not mounted> : 4.00 TB
Boot OS X (disk3s3) <not mounted> : 134 MB
USB Information: ℹ️
Mitsumi Electric Hub in Apple Extended USB Keyboard
Logitech USB-PS/2 Optical Mouse
Mitsumi Electric Apple Extended USB Keyboard
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Apple Inc. FaceTime HD Camera (Built-in)
Lexar USB_3_0 Reader
Seagate Expansion Desk 3 TB
EFI (disk5s1) <not mounted> : 315 MB
downloads (disk5s2) /Volumes/downloads : 249.18 GB (138.35 GB free)
BackUpBro (disk5s3) /Volumes/BackUpBro : 2.75 TB (1.03 TB free)
Apple Computer, Inc. IR Receiver
Apple Internal Memory Card Reader
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
G-Technology G-RAID with Thunderbolt
Configuration files: ℹ️
/etc/sysctl.conf - Exists
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Toast 11 Titanium/Spin Doctor.app
[not loaded] com.hzsystems.terminus.driver (4) [Click for support]
/Library/Extensions
[not loaded] com.Avid.driver.AvidDX (5.9.1 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.iokit.framebufferdriver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.desktopvideo.multibridge.iokit.driver (10.1.4 - SDK 10.8) [Click for support]
[not loaded] com.blackmagic-design.driver.BlackmagicIO (10.1.4 - SDK 10.8) [Click for support]
/Library/Extensions/DeckLink_Driver.kext/Contents/PlugIns
[not loaded] com.blackmagic-design.desktopvideo.firmware (10.1.4 - SDK 10.8) [Click for support]
/System/Library/Extensions
[not loaded] at.obdev.nke.LittleSnitch (3876 - SDK 10.8) [Click for support]
[not loaded] com.SafeNet.driver.Sentinel (7.5.2) [Click for support]
[not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.roxio.BluRaySupport (1.1.6) [Click for support]
/System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
[not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) [Click for support]
[not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) [Click for support]
[loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) [Click for support]
[not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) [Click for support]
/Users/[redacted]/Library/Services/ToastIt.service/Contents/MacOS
[not loaded] com.roxio.TDIXController (2.0) [Click for support]
Startup Items: ℹ️
Digidesign Mbox 2: Path: /Library/StartupItems/Digidesign Mbox 2
DigidesignLoader: Path: /Library/StartupItems/DigidesignLoader
Startup items are obsolete in OS X Yosemite
Problem System Launch Agents: ℹ️
[running] com.paragon.NTFS.notify.plist [Click for support]
Launch Agents: ℹ️
[not loaded] com.adobe.AAM.Updater-1.0.plist [Click for support]
[loaded] com.adobe.CS4ServiceManager.plist [Click for support]
[running] com.avid.ApplicationManager.plist [Click for support]
[running] com.avid.backgroundservicesmanager.plist [Click for support]
[loaded] com.avid.dmfsupportsvc.plist [Click for support]
[loaded] com.avid.interplay.dmfservice.plist [Click for support]
[loaded] com.avid.interplay.editortranscode.plist [Click for support]
[loaded] com.avid.transcodeserviceworker.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoFirmwareUpdater.plist [Click for support]
[failed] com.brother.LOGINserver.plist [Click for support] [Click for details]
[loaded] com.paragon.updater.plist [Click for support]
[failed] com.teamviewer.teamviewer.plist [Click for support] [Click for details]
[failed] com.teamviewer.teamviewer_desktop.plist [Click for support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Click for support]
[loaded] com.adobe.SwitchBoard.plist [Click for support]
[loaded] com.adobe.versioncueCS4.plist [Click for support]
[loaded] com.avid.AMCUninstaller.plist [Click for support]
[running] com.avid.interplay.editorbroker.plist [Click for support]
[running] com.avid.interplay.editortranscodestatus.plist [Click for support]
[loaded] com.blackmagic-design.desktopvideo.XPCService.plist [Click for support]
[running] com.blackmagic-design.DesktopVideoHelper.plist [Click for support]
[running] com.blackmagic-design.streaming.BMDStreamingServer.plist [Click for support]
[not loaded] com.digidesign.fwfamily.helper.plist [Click for support]
[running] com.edb.launchd.postgresql-8.4.plist [Click for support]
[loaded] com.microsoft.office.licensing.helper.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.FxPlug.plist [Click for support]
[loaded] com.noiseindustries.FxFactory.plist [Click for support]
[running] com.paceap.eden.licensed.plist [Click for support]
[loaded] com.teamviewer.Helper.plist [Click for support]
[failed] com.teamviewer.teamviewer_service.plist [Click for support]
[loaded] jp.co.canon.MasterInstaller.plist [Click for support]
[loaded] PACESupport.plist [Click for support]
User Login Items: ℹ️
iTunesHelper Programma Hidden (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Internet Plug-ins: ℹ️
Default Browser: Version: 537 - SDK 10.9
OfficeLiveBrowserPlugin: Version: 12.2.6 [Click for support]
AdobePDFViewerNPAPI: Version: 11.0.0 - SDK 10.6 [Click for support]
FlashPlayer-10.6: Version: 16.0.0.305 - SDK 10.6 [Click for support]
Silverlight: Version: 5.1.30514.0 - SDK 10.6 [Click for support]
Flash Player: Version: 16.0.0.305 - SDK 10.6 [Click for support]
QuickTime Plugin: Version: 7.7.3
iPhotoPhotocast: Version: 7.0 - SDK 10.8
SharePointBrowserPlugin: Version: 14.0.0 [Click for support]
AdobePDFViewer: Version: 11.0.0 - SDK 10.6 [Click for support]
EPPEX Plugin: Version: 10.0 [Click for support]
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.0 [Click for support]
Audio Plug-ins: ℹ️
DVCPROHDAudio: Version: 1.3.2
3rd Party Preference Panes: ℹ️
Blackmagic Desktop Video [Click for support]
DigidesignMbox2 [Click for support]
Digidesign Mbox 2 Pro [Click for support]
Flash Player [Click for support]
Paragon NTFS for Mac ® OS X [Click for support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: NO - Auto backup turned off
Volumes being backed up:
MacintoshHD: Disk size: 250.14 GB Disk used: 187.17 GB
downloads: Disk size: 249.18 GB Disk used: 110.83 GB
Destinations:
G-RAID with Thunderbolt [Local]
Total size: 8.00 TB
Total number of backups: 6
Oldest backup: 2014-04-08 14:24:41 +0000
Last backup: 2014-09-24 21:58:28 +0000
Size of backup disk: Excellent
Backup size 8.00 TB > (Disk size 499.32 GB X 3)
Top Processes by CPU: ℹ️
2% WindowServer
1% fontd
0% firefox
0% AvidApplicationManager
0% AppleSpell
Top Processes by Memory: ℹ️
498 MB firefox
241 MB mds_stores
172 MB com.apple.IconServicesAgent
137 MB Dock
100 MB java
Virtual Memory Information: ℹ️
12.33 GB Free RAM
2.39 GB Active RAM
1.11 GB Inactive RAM
1.34 GB Wired RAM
934 MB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Mar 7, 2015, 01:56:19 PM Self test - passed
Mar 6, 2015, 08:15:56 PM /Library/Logs/DiagnosticReports/Mail_2015-03-06-201556_[redacted].hang -
Performance Issue with VL06O report
Hi,
We are having performance issue with VL06O report, when run with forwarding agent. It is taking about an hour with forwarding agent. The issue is with VBPA table and we found one OSS note, but it is for old versions. ours is ECC 5.0. Can anybody know the solution? If you guys need more information, please ask me.
Thanks,
SuryaSreedhar,
Thanks for you quick response. Indexes were not created for VBPA table. basis people tested by creating indexes and gave a report that it is taking more time with indexes than regular query optimizer. this is happening in the funtion forward_ag_selection.
select vbeln lifnr from vbpa
appending corresponding fields of table lt_select
where vbeln in ct_vbeln
and posnr eq posnr_initial
and parvw eq 'SP'
and lifnr in it_spdnr.
I don't see any issue with this query. I give more info later -
Performance issue showing read by other session Event
Hi All,
we are having a severe performance issue in my database when we are running batch jobs.
This was a new database(11.2.0.2) and we are testing the performance by running some batch jobs. These batch jobs included some inserts and updates.
I am seeing read by other session in top 5 timed events and cache buffers chains in Latch Miss Sources section.
Please help me to solve this out.
Inst Num Startup Time Release RAC
1 27-Feb-12 09:03 11.2.0.2.0 NO
Platform CPUs Cores Sockets Memory(GB)
Linux x86 64-bit 8 8 8 48.00
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 5605 29-Feb-12 03:00:27 63 4.5
End Snap: 5614 29-Feb-12 12:00:47 63 4.3
Elapsed: 540.32 (mins)
DB Time: 1,774.23 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,952M 1,952M Std Block Size: 16K
Shared Pool Size: 1,024M 1,024M Log Buffer: 18,868K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 3.3 0.8 0.02 0.05
DB CPU(s): 1.1 0.3 0.01 0.02
Redo size: 55,763.8 13,849.3
Logical reads: 23,906.6 5,937.4
Block changes: 325.7 80.9
Physical reads: 665.6 165.3
Physical writes: 40.4 10.0
User calls: 60.7 15.1
Parses: 10.6 2.6
Hard parses: 1.1 0.3
W/A MB processed: 0.6 0.2
Logons: 0.1 0.0
Executes: 151.2 37.6
Rollbacks: 0.0 0.0
Transactions: 4.0
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.94 Redo NoWait %: 100.00
Buffer Hit %: 97.90 In-memory Sort %: 100.00
Library Hit %: 98.06 Soft Parse %: 90.16
Execute to Parse %: 92.96 Latch Hit %: 100.00
Parse CPU to Parse Elapsd %: 76.71 % Non-Parse CPU: 98.57
Shared Pool Statistics Begin End
Memory Usage %: 89.38 87.96
% SQL with executions>1: 97.14 95.15
% Memory for SQL w/exec>1: 96.05 92.46
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
db file sequential read 14,092,706 65,613 5 61.6 User I/O
DB CPU 34,819 32.7
read by other session 308,534 1,260 4 1.2 User I/O
direct path read 97,454 987 10 .9 User I/O
db file scattered read 71,870 910 13 .9 User I/O
Host CPU (CPUs: 8 Cores: 8 Sockets: 8)
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
0.43 0.36 13.7 0.6 9.7 85.7
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 13.5
% of busy CPU for Instance: 94.2
%DB time waiting for CPU - Resource Mgr: 0.0
Memory Statistics
~~~~~~~~~~~~~~~~~ Begin End
Host Mem (MB): 49,152.0 49,152.0
SGA use (MB): 3,072.0 3,072.0
PGA use (MB): 506.5 629.1
% Host Mem used for SGA+PGA: 7.28 7.53
Time Model Statistics
-> Total time in database user-calls (DB Time): 106453.8s
-> Statistics including the word "background" measure background process
time, and so do not contribute to the DB time statistic
-> Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 105,531.1 99.1
DB CPU 34,818.8 32.7
parse time elapsed 714.7 .7
hard parse elapsed time 684.8 .6
PL/SQL execution elapsed time 161.9 .2
PL/SQL compilation elapsed time 44.2 .0
connection management call elapsed time 16.9 .0
hard parse (sharing criteria) elapsed time 10.2 .0
hard parse (bind mismatch) elapsed time 9.4 .0
sequence load elapsed time 2.9 .0
repeated bind elapsed time 0.5 .0
failed parse elapsed time 0.0 .0
DB time 106,453.8
background elapsed time 1,753.9
background cpu time 61.7
Operating System Statistics
-> *TIME statistic values are diffed.
All others display actual values. End Value is displayed if different
-> ordered by statistic type (CPU Use, Virtual Memory, Hardware Config), Name
Statistic Value End Value
BUSY_TIME 3,704,415
IDLE_TIME 22,203,740
IOWAIT_TIME 2,517,864
NICE_TIME 3
SYS_TIME 145,696
USER_TIME 3,557,758
LOAD 0 0
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 358,813,045,760
VM_OUT_BYTES 29,514,830,848
PHYSICAL_MEMORY_BYTES 51,539,607,552
NUM_CPUS 8
NUM_CPU_CORES 8
NUM_CPU_SOCKETS 8
GLOBAL_RECEIVE_SIZE_MAX 4,194,304
GLOBAL_SEND_SIZE_MAX 1,048,586
TCP_RECEIVE_SIZE_DEFAULT 87,380
TCP_RECEIVE_SIZE_MAX 4,194,304
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 4,194,304
TCP_SEND_SIZE_MIN 4,096
Operating System Statistics -
Snap Time Load %busy %user %sys %idle %iowait
29-Feb 03:00:27 0.4 N/A N/A N/A N/A N/A
29-Feb 04:00:35 1.4 11.9 11.2 0.6 88.1 14.3
29-Feb 05:00:41 1.7 13.8 13.2 0.6 86.2 15.8
29-Feb 06:00:48 1.5 14.0 13.5 0.6 86.0 12.3
29-Feb 07:01:00 1.8 16.3 15.8 0.5 83.7 10.4
29-Feb 08:00:12 2.6 23.2 22.5 0.6 76.8 12.6
29-Feb 09:00:26 1.3 16.6 16.0 0.5 83.4 5.7
29-Feb 10:00:33 1.2 13.8 13.3 0.5 86.2 2.0
29-Feb 11:00:43 1.3 14.5 14.0 0.5 85.5 3.8
29-Feb 12:00:47 0.4 4.9 4.2 0.7 95.1 10.6
Foreground Wait Class
-> s - second, ms - millisecond - 1000th of a second
-> ordered by wait time desc, waits desc
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
-> Captured Time accounts for 97.9% of Total DB time 106,453.79 (s)
-> Total FG Wait Time: 69,415.64 (s) DB CPU time: 34,818.79 (s)
Avg
%Time Total Wait wait
Wait Class Waits -outs Time (s) (ms) %DB time
User I/O 14,693,843 0 69,222 5 65.0
DB CPU 34,819 32.7
Commit 40,629 0 119 3 0.1
System I/O 26,504 0 57 2 0.1
Network 1,945,010 0 11 0 0.0
Other 125,200 99 4 0 0.0
Application 2,673 0 2 1 0.0
Concurrency 3,059 0 1 0 0.0
Configuration 31 19 0 15 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
db file sequential read 14,092,706 0 65,613 5 108.0 61.6
read by other session 308,534 0 1,260 4 2.4 1.2
direct path read 97,454 0 987 10 0.7 .9
db file scattered read 71,870 0 910 13 0.6 .9
db file parallel read 35,001 0 372 11 0.3 .3
log file sync 40,629 0 119 3 0.3 .1
control file sequential re 26,504 0 57 2 0.2 .1
direct path read temp 14,499 0 49 3 0.1 .0
direct path write temp 9,186 0 28 3 0.1 .0
SQL*Net message to client 1,923,973 0 5 0 14.7 .0
SQL*Net message from dblin 1,056 0 5 5 0.0 .0
Disk file operations I/O 8,848 0 2 0 0.1 .0
ASM file metadata operatio 36 0 2 54 0.0 .0
SQL*Net break/reset to cli 2,636 0 1 1 0.0 .0
ADR block file read 472 0 1 1 0.0 .0
os thread startup 8 0 1 74 0.0 .0
SQL*Net more data to clien 17,656 0 1 0 0.1 .0
asynch descriptor resize 123,852 100 0 0 0.9 .0
local write wait 110 0 0 4 0.0 .0
utl_file I/O 55,635 0 0 0 0.4 .0
log file switch (private s 8 0 0 52 0.0 .0
cursor: pin S wait on X 2 0 0 142 0.0 .0
enq: KO - fast object chec 13 0 0 20 0.0 .0
PX Deq: Slave Session Stat 248 0 0 1 0.0 .0
enq: RO - fast object reus 18 0 0 11 0.0 .0
latch: cache buffers chain 2,511 0 0 0 0.0 .0
latch: shared pool 195 0 0 1 0.0 .0
CSS initialization 12 0 0 8 0.0 .0
PX qref latch 54 100 0 2 0.0 .0
SQL*Net more data from cli 995 0 0 0 0.0 .0
SQL*Net more data from dbl 300 0 0 0 0.0 .0
kksfbc child completion 1 100 0 56 0.0 .0
library cache: mutex X 244 0 0 0 0.0 .0
PX Deq: Signal ACK RSG 124 0 0 0 0.0 .0
undo segment extension 6 100 0 7 0.0 .0
PX Deq: Signal ACK EXT 124 0 0 0 0.0 .0
library cache load lock 3 0 0 9 0.0 .0
ADR block file write 45 0 0 1 0.0 .0
CSS operation: action 12 0 0 2 0.0 .0
reliable message 28 0 0 1 0.0 .0
CSS operation: query 72 0 0 0 0.0 .0
latch: row cache objects 14 0 0 1 0.0 .0
enq: SQ - contention 17 0 0 0 0.0 .0
latch free 32 0 0 0 0.0 .0
buffer busy waits 52 0 0 0 0.0 .0
enq: PS - contention 16 0 0 0 0.0 .0
enq: TX - row lock content 6 0 0 1 0.0 .0
SQL*Net message to dblink 1,018 0 0 0 0.0 .0
cursor: pin S 23 0 0 0 0.0 .0
latch: cache buffers lru c 8 0 0 0 0.0 .0
SQL*Net message from clien 1,923,970 0 944,508 491 14.7
jobq slave wait 66,732 100 33,334 500 0.5
Streams AQ: waiting for me 6,481 100 32,412 5001 0.0
wait for unread message on 32,858 98 32,411 986 0.3
PX Deq: Execution Msg 1,448 0 190 131 0.0
PX Deq: Execute Reply 1,196 0 74 62 0.0
HS message to agent 228 0 4 19 0.0
single-task message 42 0 4 97 0.0
PX Deq Credit: send blkd 904 0 2 3 0.0
PX Deq Credit: need buffer 205 0 1 3 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
PX Deq: Table Q Normal 4,291 0 1 0 0.0
PX Deq: Join ACK 124 0 0 1 0.0
PX Deq: Parse Reply 124 0 0 0 0.0
KSV master wait 256 0 0 0 0.0
Latch Miss Sources
-> only latches with sleeps are shown
-> ordered by name, sleeps desc
NoWait Waiter
Latch Name Where Misses Sleeps Sleeps
ASM map operation freeli kffmTranslate2 0 2 0
DML lock allocation ktadmc 0 2 0
FOB s.o list latch ksfd_allfob 0 2 2
In memory undo latch ktiFlushMe 0 5 0
In memory undo latch ktichg: child 0 3 0
PC and Classifier lists No latch 0 6 0
Real-time plan statistic keswxAddNewPlanEntry 0 20 20
SQL memory manager worka qesmmIRegisterWorkArea:1 0 1 1
active service list kswslogon: session logout 0 23 12
active service list kswssetsvc: PX session swi 0 6 1
active service list kswsite: service iterator 0 1 0
archive process latch kcrrgpll 0 3 3
cache buffers chains kcbgtcr_2 0 1,746 573
cache buffers chains kcbgtcr: fast path (cr pin 0 1,024 2,126
cache buffers chains kcbgcur_2 0 60 8
cache buffers chains kcbchg1: kslbegin: bufs no 0 16 3
cache buffers chains kcbgtcr: fast path 0 14 20
cache buffers chains kcbzibmlt: multi-block rea 0 10 0
cache buffers chains kcbrls_2 0 9 53
cache buffers chains kcbgtcr: kslbegin shared 0 8 1
cache buffers chains kcbrls_1 0 7 84
cache buffers chains kcbgtcr: kslbegin excl 0 6 14
cache buffers chains kcbnew: new latch again 0 6 0
cache buffers chains kcbzgb: scan from tail. no 0 6 0
cache buffers chains kcbzwb 0 5 8
cache buffers chains kcbgcur: fast path (shr) 0 3 0
cache buffers chains kcbget: pin buffer 0 3 0
cache buffers chains kcbzhngcbk2_1 0 1 0
cache buffers lru chain kcbzgws 0 19 0
cache buffers lru chain kcbo_link_q 0 3 0
call allocation ksuxds 0 14 10
call allocation ksudlp: top call 0 2 3
enqueue hash chains ksqgtl3 0 2 1
enqueue hash chains ksqrcl 0 1 2
enqueues ksqgel: create enqueue 0 1 0
object queue header oper kcbo_unlink_q 0 5 2
object queue header oper kcbo_sw_buf 0 2 0
object queue header oper kcbo_link_q 0 1 2
object queue header oper kcbo_switch_cq 0 1 2
object queue header oper kcbo_switch_mq_bg 0 1 4
parallel query alloc buf kxfpbalo 0 1 1
process allocation ksucrp:1 0 2 0
process queue reference kxfpqrsnd 0 1 0
qmn task queue latch kwqmnmvtsks: delay to read 0 1 0
redo allocation kcrfw_redo_gen: redo alloc 0 17 0
row cache objects kqreqd: reget 0 6 0
row cache objects kqrpre: find obj 0 6 13
row cache objects kqrso 0 2 0
row cache objects kqreqd 0 1 2
row cache objects kqrpre: init complete 0 1 1
shared pool kghalo 0 199 106
shared pool kghupr1 0 39 109
shared pool kghfre 0 18 19
shared pool kghalp 0 7 29
space background task la ktsj_grab_task 0 21 27
Mutex Sleep Summary
-> ordered by number of sleeps desc
Wait
Mutex Type Location Sleeps Time (ms)
Library Cache kglhdgn2 106 338 12
Library Cache kgllkc1 57 259 10
Library Cache kgllkdl1 85 123 21
Cursor Pin kkslce [KKSCHLPIN2] 70 286
Library Cache kglget2 2 31 1
Library Cache kglhdgn1 62 31 2
Library Cache kglpin1 4 26 1
Library Cache kglpnal1 90 18 0
Library Cache kglpndl1 95 15 2
Library Cache kgllldl2 112 6 0
Library Cache kglini1 32 1 0
-------------------------------------------------------------Thanks in advance.Hi,
Thanks for reply.
I provided one hour report.
Inst Num Startup Time Release RAC
1 27-Feb-12 09:03 11.2.0.2.0 NO
Platform CPUs Cores Sockets Memory(GB)
Linux x86 64-bit 8 8 8 48.00
Snap Id Snap Time Sessions Curs/Sess
Begin Snap: 5606 29-Feb-12 04:00:35 63 3.7
End Snap: 5607 29-Feb-12 05:00:41 63 3.6
Elapsed: 60.11 (mins)
DB Time: 382.67 (mins)
Cache Sizes Begin End
~~~~~~~~~~~ ---------- ----------
Buffer Cache: 1,952M 1,952M Std Block Size: 16K
Shared Pool Size: 1,024M 1,024M Log Buffer: 18,868K
Load Profile Per Second Per Transaction Per Exec Per Call
~~~~~~~~~~~~ --------------- --------------- ---------- ----------
DB Time(s): 6.4 0.8 0.03 0.03
DB CPU(s): 1.0 0.1 0.00 0.00
Redo size: 84,539.3 10,425.6
Logical reads: 23,345.6 2,879.1
Block changes: 386.5 47.7
Physical reads: 1,605.0 197.9
Physical writes: 7.1 0.9
User calls: 233.9 28.9
Parses: 4.0 0.5
Hard parses: 0.1 0.0
W/A MB processed: 0.1 0.0
Logons: 0.1 0.0
Executes: 210.9 26.0
Rollbacks: 0.0 0.0
Transactions: 8.1
Instance Efficiency Percentages (Target 100%)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Buffer Nowait %: 99.62 Redo NoWait %: 100.00
Buffer Hit %: 95.57 In-memory Sort %: 100.00
Library Hit %: 99.90 Soft Parse %: 98.68
Execute to Parse %: 98.10 Latch Hit %: 99.99
Parse CPU to Parse Elapsd %: 32.08 % Non-Parse CPU: 99.90
Shared Pool Statistics Begin End
Memory Usage %: 89.25 89.45
% SQL with executions>1: 96.79 97.52
% Memory for SQL w/exec>1: 95.67 96.56
Top 5 Timed Foreground Events
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Avg
wait % DB
Event Waits Time(s) (ms) time Wait Class
db file sequential read 3,054,464 17,002 6 74.0 User I/O
DB CPU 3,748 16.3
read by other session 199,603 796 4 3.5 User I/O
direct path read 46,301 439 9 1.9 User I/O
db file scattered read 21,113 269 13 1.2 User I/O
Host CPU (CPUs: 8 Cores: 8 Sockets: 8)
~~~~~~~~ Load Average
Begin End %User %System %WIO %Idle
1.45 1.67 13.2 0.6 15.8 86.2
Instance CPU
~~~~~~~~~~~~
% of total CPU for Instance: 13.0
% of busy CPU for Instance: 94.7
%DB time waiting for CPU - Resource Mgr: 0.0
Memory Statistics
~~~~~~~~~~~~~~~~~ Begin End
Host Mem (MB): 49,152.0 49,152.0
SGA use (MB): 3,072.0 3,072.0
PGA use (MB): 513.5 467.7
% Host Mem used for SGA+PGA: 7.29 7.20
Time Model Statistics
-> Total time in database user-calls (DB Time): 22960.5s
-> Statistics including the word "background" measure background process
time, and so do not contribute to the DB time statistic
-> Ordered by % or DB time desc, Statistic name
Statistic Name Time (s) % of DB Time
sql execute elapsed time 22,835.9 99.5
DB CPU 3,748.4 16.3
parse time elapsed 15.4 .1
hard parse elapsed time 14.3 .1
PL/SQL execution elapsed time 7.5 .0
PL/SQL compilation elapsed time 6.0 .0
connection management call elapsed time 1.6 .0
sequence load elapsed time 0.4 .0
hard parse (sharing criteria) elapsed time 0.0 .0
repeated bind elapsed time 0.0 .0
failed parse elapsed time 0.0 .0
DB time 22,960.5
background elapsed time 238.1
background cpu time 4.9
Operating System Statistics
-> *TIME statistic values are diffed.
All others display actual values. End Value is displayed if different
-> ordered by statistic type (CPU Use, Virtual Memory, Hardware Config), Name
Statistic Value End Value
BUSY_TIME 396,506
IDLE_TIME 2,483,725
IOWAIT_TIME 455,495
NICE_TIME 0
SYS_TIME 16,163
USER_TIME 380,052
LOAD 1 2
RSRC_MGR_CPU_WAIT_TIME 0
VM_IN_BYTES 95,646,943,232
VM_OUT_BYTES 1,686,059,008
PHYSICAL_MEMORY_BYTES 51,539,607,552
NUM_CPUS 8
NUM_CPU_CORES 8
NUM_CPU_SOCKETS 8
GLOBAL_RECEIVE_SIZE_MAX 4,194,304
GLOBAL_SEND_SIZE_MAX 1,048,586
TCP_RECEIVE_SIZE_DEFAULT 87,380
TCP_RECEIVE_SIZE_MAX 4,194,304
TCP_RECEIVE_SIZE_MIN 4,096
TCP_SEND_SIZE_DEFAULT 16,384
TCP_SEND_SIZE_MAX 4,194,304
TCP_SEND_SIZE_MIN 4,096
Operating System Statistics -
Snap Time Load %busy %user %sys %idle %iowait
29-Feb 04:00:35 1.4 N/A N/A N/A N/A N/A
29-Feb 05:00:41 1.7 13.8 13.2 0.6 86.2 15.8
Foreground Wait Class
-> s - second, ms - millisecond - 1000th of a second
-> ordered by wait time desc, waits desc
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
-> Captured Time accounts for 97.6% of Total DB time 22,960.46 (s)
-> Total FG Wait Time: 18,651.75 (s) DB CPU time: 3,748.35 (s)
Avg
%Time Total Wait wait
Wait Class Waits -outs Time (s) (ms) %DB time
User I/O 3,327,253 0 18,576 6 80.9
DB CPU 3,748 16.3
Commit 23,882 0 69 3 0.3
System I/O 1,035 0 3 3 0.0
Network 842,393 0 2 0 0.0
Other 10,120 99 0 0 0.0
Configuration 3 0 0 58 0.0
Application 264 0 0 1 0.0
Concurrency 1,482 0 0 0 0.0
Foreground Wait Events
-> s - second, ms - millisecond - 1000th of a second
-> Only events with Total Wait Time (s) >= .001 are shown
-> ordered by wait time desc, waits desc (idle events last)
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % DB
Event Waits -outs Time (s) (ms) /txn time
db file sequential read 3,054,464 0 17,002 6 104.5 74.0
read by other session 199,603 0 796 4 6.8 3.5
direct path read 46,301 0 439 9 1.6 1.9
db file scattered read 21,113 0 269 13 0.7 1.2
log file sync 23,882 0 69 3 0.8 .3
db file parallel read 4,727 0 68 14 0.2 .3
control file sequential re 1,035 0 3 3 0.0 .0
SQL*Net message to client 840,792 0 2 0 28.8 .0
direct path read temp 95 0 2 18 0.0 .0
local write wait 79 0 0 4 0.0 .0
Disk file operations I/O 870 0 0 0 0.0 .0
ASM file metadata operatio 4 0 0 50 0.0 .0
log file switch (private s 3 0 0 58 0.0 .0
ADR block file read 36 0 0 3 0.0 .0
enq: RO - fast object reus 5 0 0 16 0.0 .0
latch: cache buffers chain 1,465 0 0 0 0.1 .0
SQL*Net break/reset to cli 256 0 0 0 0.0 .0
asynch descriptor resize 10,059 100 0 0 0.3 .0
SQL*Net more data to clien 1,510 0 0 0 0.1 .0
enq: KO - fast object chec 3 0 0 8 0.0 .0
SQL*Net more data from cli 91 0 0 0 0.0 .0
latch: shared pool 14 0 0 0 0.0 .0
ADR block file write 5 0 0 1 0.0 .0
reliable message 8 0 0 0 0.0 .0
direct path write temp 1 0 0 2 0.0 .0
SQL*Net message from clien 840,794 0 68,885 82 28.8
jobq slave wait 7,365 100 3,679 499 0.3
Streams AQ: waiting for me 721 100 3,605 5000 0.0
wait for unread message on 3,648 98 3,603 988 0.1
KSV master wait 20 0 0 0 0.0
Background Wait Events
-> ordered by wait time desc, waits desc (idle events last)
-> Only events with Total Wait Time (s) >= .001 are shown
-> %Timeouts: value of 0 indicates value was < .5%. Value of null is truly 0
Avg
%Time Total Wait wait Waits % bg
Event Waits -outs Time (s) (ms) /txn time
log file parallel write 29,353 0 83 3 1.0 34.8
db file parallel write 5,753 0 17 3 0.2 6.9
db file sequential read 1,638 0 15 9 0.1 6.1
control file sequential re 5,142 0 13 2 0.2 5.4
os thread startup 140 0 8 58 0.0 3.4
control file parallel writ 1,440 0 8 6 0.0 3.4
log file sequential read 304 0 8 26 0.0 3.3
db file scattered read 214 0 2 9 0.0 .8
ASM file metadata operatio 1,199 0 1 1 0.0 .3
direct path write 35 0 0 6 0.0 .1
direct path read 41 0 0 5 0.0 .1
kfk: async disk IO 6 0 0 9 0.0 .0
Disk file operations I/O 1,266 0 0 0 0.0 .0
ADR block file read 16 0 0 2 0.0 .0
read by other session 3 0 0 8 0.0 .0
Log archive I/O 2 0 0 10 0.0 .0
log file sync 3 0 0 5 0.0 .0
asynch descriptor resize 341 100 0 0 0.0 .0
CSS initialization 1 0 0 6 0.0 .0
log file single write 4 0 0 1 0.0 .0
latch: redo allocation 3 0 0 1 0.0 .0
ADR block file write 5 0 0 1 0.0 .0
LGWR wait for redo copy 45 0 0 0 0.0 .0
CSS operation: query 6 0 0 0 0.0 .0
CSS operation: action 1 0 0 1 0.0 .0
SQL*Net message to client 420 0 0 0 0.0 .0
rdbms ipc message 47,816 39 61,046 1277 1.6
DIAG idle wait 7,200 100 7,200 1000 0.2
Space Manager: slave idle 1,146 98 5,674 4951 0.0
class slave wait 284 0 3,983 14026 0.0
dispatcher timer 61 100 3,660 60006 0.0
Streams AQ: qmn coordinato 258 50 3,613 14003 0.0
Streams AQ: qmn slave idle 130 0 3,613 27789 0.0
Streams AQ: waiting for ti 7 71 3,608 515430 0.0
wait for unread message on 3,605 100 3,606 1000 0.1
pmon timer 1,201 100 3,604 3001 0.0
smon timer 15 73 3,603 240207 0.0
ASM background timer 754 0 3,602 4777 0.0
shared server idle wait 120 100 3,601 30006 0.0
SQL*Net message from clien 554 0 4 7 0.0
KSV master wait 101 0 0 2 0.0
Wait Event Histogram
-> Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
-> % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
-> % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
-> Ordered by Event (idle events last)
% of Waits
Total
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
ADR block file read 52 73.1 1.9 9.6 13.5 1.9
ADR block file write 10 100.0
ADR file lock 12 100.0
ARCH wait for archivelog l 3 100.0
ASM file metadata operatio 1203 97.3 .5 .7 .3 .2 .9
CSS initialization 1 100.0
CSS operation: action 1 100.0
CSS operation: query 6 83.3 16.7
Disk file operations I/O 2118 95.4 4.5 .1
LGWR wait for redo copy 45 100.0
Log archive I/O 2 100.0
SQL*Net break/reset to cli 256 99.6 .4
SQL*Net message to client 839.9 100.0 .0
SQL*Net more data from cli 91 100.0
SQL*Net more data to clien 1503 100.0
asynch descriptor resize 10.4K 100.0
buffer busy waits 2 100.0
control file parallel writ 1440 5.7 35.1 24.0 16.3 12.0 5.5 1.5
control file sequential re 6177 69.4 7.5 5.9 8.1 7.1 1.7 .3
db file parallel read 4727 1.7 3.2 3.2 10.1 46.6 33.3 1.8
db file parallel write 5755 42.3 21.3 18.6 11.2 4.6 1.4 .5
db file scattered read 21.5K 8.4 4.3 11.9 18.9 26.3 25.3 4.9
db file sequential read 3053. 28.7 15.1 11.1 17.9 21.5 5.4 .3 .0
direct path read 46.3K 9.9 8.8 18.5 21.7 22.8 15.7 2.7
direct path read temp 95 9.5 9.5 23.2 49.5 8.4
direct path write 35 11.4 31.4 17.1 22.9 11.4 2.9 2.9
direct path write temp 1 100.0
enq: KO - fast object chec 3 66.7 33.3
enq: RO - fast object reus 5 20.0 20.0 20.0 20.0 20.0
kfk: async disk IO 6 50.0 16.7 16.7 16.7
latch free 3 100.0
latch: cache buffers chain 1465 100.0
latch: cache buffers lru c 1 100.0
latch: object queue header 2 100.0
latch: redo allocation 3 33.3 33.3 33.3
latch: row cache objects 2 100.0
latch: shared pool 15 93.3 6.7
local write wait 79 35.4 34.2 21.5 8.9
log file parallel write 29.4K 47.8 21.7 11.9 9.9 6.8 1.6 .3
log file sequential read 304 6.3 3.0 3.6 10.2 23.4 24.3 29.3
log file single write 4 25.0 75.0
log file switch (private s 3 100.0
log file sync 23.9K 40.9 28.0 12.9 9.7 6.7 1.5 .3
os thread startup 140 100.0
read by other session 199.6 37.1 19.9 12.9 13.1 13.8 3.1 .2
reliable message 8 100.0
ASM background timer 755 2.9 .4 .1 .1 .3 .1 .3 95.8
DIAG idle wait 7196 100.0
KSV master wait 121 88.4 2.5 3.3 2.5 .8 .8 1.7
SQL*Net message from clien 840.1 97.1 1.8 .5 .2 .2 .1 .0 .1
Space Manager: slave idle 1147 .1 .5 99.4
Streams AQ: qmn coordinato 258 49.6 .4 50.0
Streams AQ: qmn slave idle 130 .8 99.2
Streams AQ: waiting for me 721 100.0
Streams AQ: waiting for ti 7 28.6 42.9 28.6
class slave wait 283 39.9 2.5 2.5 3.5 4.9 9.2 15.2 22.3
dispatcher timer 60 100.0
jobq slave wait 7360 .0 .0 .0 99.9
pmon timer 1201 100.0
rdbms ipc message 47.8K 2.7 31.6 17.4 1.1 1.1 .9 20.9 24.3
Wait Event Histogram DB/Inst: I2KPROD/I2KPROD Snaps: 5606-5607
-> Units for Total Waits column: K is 1000, M is 1000000, G is 1000000000
-> % of Waits: value of .0 indicates value was <.05%; value of null is truly 0
-> % of Waits: column heading of <=1s is truly <1024ms, >1s is truly >=1024ms
-> Ordered by Event (idle events last)
% of Waits
Total
Event Waits <1ms <2ms <4ms <8ms <16ms <32ms <=1s >1s
shared server idle wait 120 100.0
smon timer 16 6.3 93.8
wait for unread message on 7250 .1 99.9
Latch Miss Sources
-> only latches with sleeps are shown
-> ordered by name, sleeps desc
NoWait Waiter
Latch Name Where Misses Sleeps Sleeps
In memory undo latch ktichg: child 0 1 0
active service list kswslogon: session logout 0 2 0
cache buffers chains kcbgtcr_2 0 1,123 483
cache buffers chains kcbgtcr: fast path (cr pin 0 496 1,131
cache buffers chains kcbrls_2 0 5 6
cache buffers chains kcbgcur_2 0 4 0
cache buffers chains kcbgtcr: fast path 0 3 1
cache buffers chains kcbzwb 0 2 4
cache buffers chains kcbchg1: kslbegin: bufs no 0 1 0
cache buffers chains kcbnew: new latch again 0 1 0
cache buffers chains kcbrls_1 0 1 6
cache buffers chains kcbzgb: scan from tail. no 0 1 0
cache buffers lru chain kcbzgws 0 1 0
object queue header oper kcbo_switch_cq 0 1 0
object queue header oper kcbo_switch_mq_bg 0 1 2
redo allocation kcrfw_redo_gen: redo alloc 0 3 0
row cache objects kqrpre: find obj 0 1 1
row cache objects kqrso 0 1 0
shared pool kghalo 0 13 3
shared pool kghupr1 0 4 15
shared pool kghalp 0 1 0
space background task la ktsj_grab_task 0 2 2
------------------------------------------------------------- -
Major performance Issues after upgrading to 10.9.2
Hi,
I have been having major performance issues almost preventing me from using the computer at times. I suspect I don't have enough memory to run Maverick as the computer was great before I upgraded.
If any experts or people with ideas for me to speed up the computer, please respond. If you think the only way to improve performance is add memory or revert back to a previous version of OSX that I have a backup for, let me know.
Here is the info on my system, thank you in advance!!
Hardware Information:
MacBook Pro (15-inch, Late 2008)
MacBook Pro - model: MacBookPro5,1
1 2.4 GHz Intel Core 2 Duo CPU: 2 cores
2 GB RAM
Video Information:
NVIDIA GeForce 9400M - VRAM: 256 MB
NVIDIA GeForce 9600M GT - VRAM: 256 MB
System Software:
OS X 10.9.2 (13C1021) - Uptime: 3 days 21:20:10
Disk Information:
Hitachi HTS543225L9SA02 disk0 : (250.06 GB)
EFI (disk0s1) <not mounted>: 209.7 MB
:c (disk0s2) / [Startup]: 249.2 GB (67.82 GB free)
Recovery HD (disk0s3) <not mounted>: 650 MB
MATSHITADVD-R UJ-868
USB Information:
Apple Inc. Built-in iSight
Apple, Inc. Apple Internal Keyboard / Trackpad
Apple Computer, Inc. IR Receiver
Fitbit Inc. Fitbit Base Station
Apple Inc. BRCM2046 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information:
Configuration files:
/etc/sysctl.conf - Exists
/etc/hosts - Count: 29
Gatekeeper:
Mac App Store and identified developers
Kernel Extensions:
[not loaded] com.LaCie.ScsiType00 (1.2.0) Support
[not loaded] com.cisco.nke.ipsec (2.0.1) Support
[not loaded] com.leapfrog.codeless.kext (2) Support
[not loaded] com.leapfrog.driver.LfConnectDriver (1.8.1 - SDK 10.7) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverInt (0.0.39) Support
[not loaded] com.rim.driver.BlackBerryUSBDriverVSP (0.0.39) Support
[not loaded] net.kromtech.kext.AVKauth (2.3.6 - SDK 10.8) Support
[not loaded] net.kromtech.kext.Firewall (2.3.6 - SDK 10.8) Support
Startup Items:
CiscoVPN: Path: /System/Library/StartupItems/CiscoVPN
Problem System Launch Daemons:
[failed] com.apple.wdhelper.plist
Launch Daemons:
[loaded] com.adobe.fpsaud.plist Support
[loaded] com.adobe.SwitchBoard.plist Support
[running] com.fitbit.galileod.plist Support
[loaded] com.google.keystone.daemon.plist Support
[loaded] com.leapfrog.connect.shell.plist Support
[loaded] com.microsoft.office.licensing.helper.plist Support
[loaded] com.timesoftware.timemachineeditor.backupd-auto.plist Support
[running] com.zeobit.MacKeeper.AntiVirus.plist Support
[running] com.zeobit.MacKeeper.plugin.AntiTheft.daemon.plist Support
Launch Agents:
[not loaded] com.adobe.AAM.Updater-1.0.plist Support
[loaded] com.adobe.CS5ServiceManager.plist Support
[running] com.brother.LOGINserver.plist Support
[running] com.google.keystone.agent.plist Support
User Launch Agents:
[loaded] com.adobe.ARM.[...].plist Support
[failed] [email protected]
[loaded] com.macpaw.CleanMyMac.helperTool.plist Support
[running] com.microsoft.LaunchAgent.SyncServicesAgent.plist Support
[running] com.zeobit.MacKeeper.Helper.plist Support
User Login Items:
Google Chrome
Internet Plug-ins:
o1dbrowserplugin: Version: 5.3.1.18536 Support
Google Earth Web Plug-in: Version: 7.1 Support
Default Browser: Version: 537 - SDK 10.9
Flip4Mac WMV Plugin: Version: 2.3.8.1 Support
OfficeLiveBrowserPlugin: Version: 12.2.9 Support
AdobePDFViewerNPAPI: Version: 10.1.9 Support
FlashPlayer-10.6: Version: 13.0.0.201 - SDK 10.6 Support
DivXBrowserPlugin: Version: 2.0 Support
Silverlight: Version: 5.1.10411.0 - SDK 10.6 Support
Flash Player: Version: 13.0.0.201 - SDK 10.6 Outdated! Update
iPhotoPhotocast: Version: 7.0
googletalkbrowserplugin: Version: 5.3.1.18536 Support
QuickTime Plugin: Version: 7.7.3
AdobePDFViewer: Version: 10.1.9 Support
GarminGpsControl: Version: 2.6.4.0 Release Support
SharePointBrowserPlugin: Version: 14.3.9 - SDK 10.6 Support
JavaAppletPlugin: Version: 14.9.0 - SDK 10.7 Check version
Safari Extensions:
Dashlane: Version: 2.4.0.55923
Audio Plug-ins:
BluetoothAudioPlugIn: Version: 1.0 - SDK 10.9
AirPlay: Version: 2.0 - SDK 10.9
AppleAVBAudio: Version: 203.2 - SDK 10.9
iSightAudio: Version: 7.7.3 - SDK 10.9
iTunes Plug-ins:
Quartz Composer Visualizer: Version: 1.4 - SDK 10.9
User Internet Plug-ins:
Dashlane: Version: Dashlane 1.0.0 - SDK 10.7 Support
Move_Media_Player: Version: npmnqmp 071705000010 Support
WebEx64: Version: 1.0 - SDK 10.6 Support
Picasa: Version: 1.0 Support
3rd Party Preference Panes:
Flash Player Support
Flip4Mac WMV Support
Growl Support
Time Machine:
Skip System Files: NO
Auto backup: NO - Auto backup turned off
Time Machine not configured!
Top Processes by CPU:
3% WindowServer
2% SystemUIServer
1% diskimages-helper
1% mds
0% Google Chrome Helper EH
Top Processes by Memory:
94 MB Google Chrome
59 MB GoogleSoftwareUpdateDaemon
57 MB Google Chrome Helper EH
52 MB Google Chrome Helper
39 MB Finder
Virtual Memory Information:
40 MB Free RAM
499 MB Active RAM
481 MB Inactive RAM
465 MB Wired RAM
7.33 GB Page-ins
502 MB Page-outsThe performance issues are due to third party software. Mavericks at the minimum requires 2GB's of RAM but I don't think that's the issue. And you can upgrade RAM anytime.
MacKeeper should be uninstalled. It does far more harm than good.
Do not install MacKeeper: Apple Support Communities
Uninstall instructions > how to uninstall MacKeeper
249.2 GB (67.82 GB free)
Keep an eye on available disk space.
Click your Apple menu icon top left in your screen. From the drop down menu click About This Mac > More Info > Storage
Make sure there's at least 15% free disk space. Less can slow your Mac down.
You also need to uninstall CleanMyMac > How To Uninstall CleanMyMac
Third party so called Mac cleaning utilities are not necessary on a Mac. Your Mac runs maintenance in the background for you.
Mac OS X: About background maintenance tasks
Maybe you are looking for
-
When you are doing links in a column, and there is not much room so you want them to sit one on top another, if you use <p> </p> they are to far apart and take up to much room, so what mark up do you use. can any one help please.
-
N80 and Serious Video problems
I am so not impressed with the Nokia N80 Video Function. I am having major problems in playing 95% of my videos from my old K750 which plays them with out problems. Real player opens. Then stops for s few seconds starts again plays about 4 seconds, s
-
help!!! i accidentally typed in the wrong name i wanted to put in for my mac. so it is called drafterkif's macbook not drafterkid's macbook. how do you change it????
-
Is it possible to dwnload a file from web with given URL into our local sap
Hi every Body! Is it possible to download a file from web with given URL into local PC with abap. thanks vikram.c
-
I was hoping someone could help me figure out if there is a way to precompose layers into a specific work area you designate. For instance, you set an "in" and an "out" to your composition, then you precompose. Your composition then starts from the c