Weblogic running oracle down

We have a client appliication making remote calls to weblogic (ejb, jms, etc.). When oracle goes down however, the client locks up, stuck in the remote ejb call. The ejb is likely stuck timing out on the sql connection.
Anyhow, this timeout is excessive. How can the client be made to take control again, if a remote ejb call is not 'answered' within x seconds?
BTW, it's not as though the first timeout is long and thereafter it times out quickly. Every time you look up the ejb, it is found, however the ejb method call takes very long to timeout, when discovering oracle is not available.
This has to be a common problem, and there must be a common solution.

Similar Messages

SLES 8 running Oracle 9 hangs

I have Suse Linux Enterprise Server 8 on an IBM X225 server, model 8649, with two Pentium 4 Xeon processors, 1 GB memory, running Oracle 9.2.0.4. The OS has been kept up to date with patches via YOU. The system will hang from time to time with no warning, and nothing out of the ordinary written to /var/log/messages. I cannot even login at the console. It is completely frozen, and unfortunately seems to be random. It will be fine for a couple of days, and then it may lock up for two, three, four days straight. It usually has to be physically powered down and then back up to 'resolve' the issue. We have replaced both processors, the motherboard, all of the memory, and the video card, and still no luck. IBM says that with all the new components installed, it HAS to be a software issue. Any ideas?

I have similar situation: IBM xSeries 235 Type 8671, 2xXeon 3GHz, 2GB RAM, 6xSCSI HDD, etc; system is Linux Fedora Core 2 & Oracle 9.2.0.4. It works very well, no errors, no warnings, wonderful performance, but it falls 3..5 times a week (4 days without a crash is my best achievement).
I've downloaded and installed all firmware/bios upgrades available at their site, but it looks like the "reset" button is the only remedy for this server. Local TechSupport has unbreakable defence: this server, they say, has advanced built-in diagnostic (service processor, etc), so, any hardware problem would be located immediately; thus, the problem is Linux, don't use Fedora Core 2, don't use kernel 2.6.9, buy enterprise version (RHEL, SLES) and everything will be OK.
The fact is, I'm not sure enterprise Linux will change the situation. Choosing Fedora Core 2, I was ready to error messages, segmentation faults, problems with libraries. Instead, there is Oracle running smoothly, and Linux regularly throwing black screen, or, sometimes, Machine Check Exception, CPU Context Corrupt and other awful messages.
Without Oracle (or with Oracle and 3..4 users) system may work 2 weeks or more. So, it looks like Oracle is guilty. But I'd rather relate the problem to intensive memory and network usage, when 50 users work with database.
IBM web site contains contradictory information. It looks like there were problems (sudden crashes, reboots) with IBM xSeries Servers having Xeon and 533MHz FSB (no matter what OS). They've promised to repair it with BIOS update at the 3rd quarter (this year?). But the last BIOS update (1.13) is of 22-Jun-2004. Is this the one or not? I don't know. And after a month of fight with this server I still cannot deside: is this hardware or software problem? And what to do? Move to RH9? To Windows?
And above all, is that possible, that user mode application kills operating system like Linux? I accept, it can overload, slow down, cause denial of service.
But kernel panic, MCE, or just black screen...

Migrating applciation from weblogic to oracle 9i application server(OC4J)??????

Hi,
I am migrating my ejb application from weblogic to oracle 9i application server.What changes are needed to be made in code and what configuration changes are required.
In my application i use a couple of session beans wherin a session bean calls the method of the other session bean which acceses the database.I am using a jdbc thin driver for the database connection. is it possible for a session bean to call a method of another session bean which access the database??This concept works well in weblogic where the current application is running.
The problem is that while migrating the application to the orion server, it gives an OrionCMTException ...
memory leak..etc.
Could any one clarify.
Thanks in advance!!!

Hi Avi and Harrison,
Cease Fire avi!!!!.First of all let me clear the issue of posting the same problem twice.Well, when i mentioned the problem the first time , i found the title session bean deployment was not right and few people would look into it as it was a common problem so i thought it would be appropriate if i mentioned the title correctly , so i posted the query again with the change in title.
Now coming to the answer for ur questions.
The platform used is MS Windows NT.
The (OC4J) version is 1.0.2.2.1.
I am not using JDeveloper.
The database is oracle 8i and i am using the thin driver.
The beans to be deployed are stateless session beans.
The client involved is a web client i.e a jsp application.
The first session bean is as follows.
import java.sql.Connection;
import java.sql.Statement;
import java.sql.ResultSet;
import java.sql.SQLException;
import java.util.Vector;
import java.sql.Timestamp;
import java.rmi.RemoteException;
import java.util.Date;
import javax.ejb.*;
import javax.naming.*;
import initcontext;
import PrintMessage;
import JB_B2B_ERROR_PARSER;
* @stereotype SessionBean
* @homeInterface DB_UTILITYHome
* @remoteInterface DB_UTILITYRemote
public class DB_UTILITY implements SessionBean
     private SessionContext context;
private ResultSet rs = null;
private Statement stmt = null;
private Connection con = null;
private PrintMessage print = null;
public DB_UTILITY()
rs = null;
stmt = null;
con = null;
print = new PrintMessage();
     public Connection getConnection()throws RemoteException
          InitialContext initctx = null;
          Connection con = null;
          try
               initctx = initcontext.getContext();
               javax.sql.DataSource ds =
(javax.sql.DataSource)initctx.lookup("java:comp/env/jdbc/ePool");
               con = ds.getConnection();
//(javax.sql.DataSource)initctx.lookup("java:comp/env/jdbc/ePool");
catch(NamingException namingexception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", namingexception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("AppError",
"Epool-10001", "DB_UTILITY.getConnection"));
catch(SQLException sqlexception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", sqlexception);
throw new
epoolException(JB_B2B_ERROR_PARSER.getErrorMessage("DBError",
JB_B2B_ERROR_PARSER.getSQLCode(sqlexception),
"DB_UTILITY.getConnection"));
catch(Exception exception)
print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", exception);
throw new
epoolException(JB_B2B_ERROR_PARSER.getErrorMessage("EpoolError",
"Epool10005", "DB_UTILITY.getConnection"));
          return con;
     public String getDate()throws RemoteException
          String Date=null;
          try
               con=getConnection();
               stmt=con.createStatement();
               rs=stmt.executeQuery("SELECT
TO_CHAR(SYSDATE,'YYYY-MM-DD HH:MI:SS') FROM DUAL");
               while(rs.next())
                    Date=rs.getString(1);
               stmt.close();
               con.close();
catch(SQLException sqlexception)
     print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", sqlexception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("DBError",
JB_B2B_ERROR_PARSER.getSQLCode(sqlexception), "DB_UTILITY.getDate"));
catch(Exception exception)
     print.printUserMessage("DB_UTILITY", (new
Date()).toString(), "", exception);
throw new
EpoolException(JB_B2B_ERROR_PARSER.getErrorMessage("epoolError",
"Epool10005", "DB_UTILITY.getDate"));
finally
try
if(con != null && !con.isClosed())
con.close();
catch(Exception exception2)
stmt = null;
con = null;
          return Date;
     public void setSessionContext(SessionContext context)
          this.context = context;
     public void ejbActivate()
     public void ejbPassivate()
     public void ejbCreate()
     public void ejbRemove()
Also the xml files are as follows.
web.xml
<?xml version="1.0"?>
<!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
Inc.//DTD Web Application 2.2//EN"
"http://java.sun.com/j2ee/dtds/web-app_2_2.dtd">
<web-app>

<display-name>AddressBook Web Application</display-name>

<description>Web module that contains an HTML welcome page, and 4 JSP's.</description>

<welcome-file-list>
<welcome-file>B2B_COUNTRY_CODE.jsp</welcome-file>
</welcome-file-list>
<ejb-ref>
<ejb-ref-name>SB_B2B_COUNTRY_CODEHome</ejb-ref-name>
<ejb-ref-type>Session</ejb-ref-type>
<home>SB_B2B_COUNTRY_CODEHome</home
<remote>SB_B2B_COUNTRY_CODERemote</remote>
</ejb-ref></web-app>
Application.xml
<?xml version="1.0"?>
<!DOCTYPE application PUBLIC "-//Sun Microsystems, Inc.//DTD J2EE Application 1.2//EN" "http://java.sun.com/j2ee/dtds/application_1_2.dtd">
<application>
<display-name>Country Code</display-name>
<module>
<ejb>epool_CountryCode-ejb.jar</ejb>
</module>
<module>
<web>
<web-uri>epool_CountryCode-web.war</web-uri>
<context-root>/epool_CountryCode-web</context-root>
</web>
</module>
</application>
ejb-jar.xml:
<?xml version="1.0"?>
<!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 1.1//EN" "http://java.sun.com/j2ee/dtds/ejb-jar_1_1.dtd">
<ejb-jar>
<description>epool_CountryCode</description>
<enterprise-beans>
<session>
<display-name>CountryCode Session
Bean</display-name>
<ejb-name>SB_B2B_COUNTRY_CODERemote</ejb-name>
<home>SB_B2B_COUNTRY_CODEHome</home>
<remote>SB_B2B_COUNTRY_CODERemote</remote>
<ejb-class>SB_B2B_COUNTRY_CODE</ejb-class>
<session-type>Stateless</session-type>
<ejb-ref>
<description>EJB Epool DButility</description>
     <ejb-ref-name>DB_UTILITYRemote</ejb-ref-name>
               <ejb-ref-type>Session</ejb-ref-type>
               <home>DB_UTILITYHome</home>
               <remote>DB_UTILITYRemote</remote>
          </ejb-ref>
          <ejb-ref>
          <description>EJB Entity Bean</description>
<ejb-ref-name>EB_B2B_COUNTRY_CODERemote</ejb-ref-name>
               <ejb-ref-type>Entity</ejb-ref-type>
               <home>EB_B2B_COUNTRY_CODEHome</home>
          <remote>EB_B2B_COUNTRY_CODERemote</remote>
          </ejb-ref>
</session>
<session>
<display-name>DbUtility Session Bean</display-name>
<ejb-name>DB_UTILITYRemote</ejb-name>
<home>DB_UTILITYHome</home>
<remote>DB_UTILITYRemote</remote>
<ejb-class>DB_UTILITY</ejb-class>
<session-type>Stateless</session-type>
</session>
<entity>
<ejb-name>EB_B2B_COUNTRY_CODERemote</ejb-name>
     <home>EB_B2B_COUNTRY_CODEHome</home>
     <remote>EB_B2B_COUNTRY_CODERemote</remote>
     <ejb-class>EB_B2B_COUNTRY_CODE</ejb-class>
     <persistence-type>Container</persistence-type>
     <prim-key-class>EB_B2B_COUNTRY_CODEPK</prim-key-class>
     <reentrant>False</reentrant>
     <cmp-field>
     <field-name>country_code_desc</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>phone_format_flag</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_code</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>active_date</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>date_created</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>active_flag</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_phone_code</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>country_tax_percent</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>sort_order</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>date_modified</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>user_created</field-name>
     </cmp-field>
     <cmp-field>
     <field-name>user_modified</field-name>
     </cmp-field>
     <resource-ref>
     <description></description>
     <res-ref-name>jdbc/ePool</res-ref-name>
     <res-type>javax.sql.DataSource</res-type>
     <res-auth>Container</res-auth>
     </resource-ref>
</entity>
</enterprise-beans>
<assembly-descriptor>
     <container-transaction>
          <method>
               <ejb-name>EB_B2B_COUNTRY_CODERemote</ejb-name>
               <method-name>*</method-name>
          </method>
          <trans-attribute>Required</trans-attribute>
</container-transaction>
<security-role>
<description>Users</description>
<role-name>users</role-name>
</security-role>
</assembly-descriptor>
</ejb-jar>
The session bean which uses the above session bean is as follows.
import javax.ejb.SessionContext;
import javax.ejb.SessionBean;
import java.sql.*;
import javax.naming.Context;
import java.sql.Timestamp;
import java.util.Vector;
import initcontext;
import DB_UTILITYHome;
import DB_UTILITYRemote;
import EB_B2B_COUNTRY_CODEHome;
import EB_B2B_COUNTRY_CODERemote;
import EB_B2B_COUNTRY_CODEPK;
* @stereotype SessionBean
* @homeInterface SB_B2B_COUNTRY_CODEHome
* @remoteInterface SB_B2B_COUNTRY_CODERemote
public class SB_B2B_COUNTRY_CODE implements SessionBean
     private SessionContext context;
     * Sets the context of the bean
     * @param context The Bean's Context
     public Vector selectCountryCode(String query,String
countquery, String pagenos) throws Exception
          Context ctx = initcontext.getContext();
          Connection con=null;
          Vector records=new Vector();
          int pageno=Integer.parseInt(pagenos);
          int min=(pageno-1)*10;
          int max=pageno*10;
          int counter=0;
          boolean recordsfound=false;
          try
               DB_UTILITYHome home =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
               DB_UTILITYRemote remote =
(DB_UTILITYRemote)home.create();
               con=remote.getConnection();
               Statement stmt = con.createStatement();
               ResultSet rscount =
stmt.executeQuery(countquery);
               while(rscount.next())
                    int temp=rscount.getInt(1);
                    int pagecount=temp;
                    pagecount=pagecount/10;
                    if((temp%10)>0)
                    pagecount=pagecount+1;
                    records.addElement(""+pagecount);
               ResultSet rs = stmt.executeQuery(query);
               while(rs.next())
                    counter++;
                    if(counter>min && counter<=max)
                         String row[]=new String[8];
                         recordsfound=true;
                         row[0]=rs.getString(1);
                         row[1]=rs.getString(2);
                         row[2]=rs.getString(3);
                         row[3]=rs.getString(4);
                         row[4]=rs.getString(5);
                         row[5]=rs.getString(6);
                         row[6]=rs.getString(7);
                         row[7]=rs.getString(8);
                         records.addElement(row);
          con.close();
          catch(Exception e)
               System.out.println("Error in selecting Country
Code "+e);
               throw new Exception("Error in selecting Country
Code "+e);
          return(records);
     public void insertCountryCode(String country_code, String
country_code_desc, String country_phone_code, String
phone_format_flag,String active_flag, String sort_order,String
country_tax_percent)throws Exception
          Context ctx = initcontext.getContext();
          Double Sort_Order=null;
          Double cntry_tax_prct=null;
          if(sort_order!=null && sort_order.length()>0)
          Sort_Order=new Double(sort_order);
          if(country_tax_percent!=null &&
country_tax_percent.length()>0)
          cntry_tax_prct=new Double(country_tax_percent);
          String user_created=null;
          Timestamp date_created=null;
          Timestamp active_date=null;
          String user_modified=null;
          Timestamp date_modified=null;
          try
               DB_UTILITYHome dbhome =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
               DB_UTILITYRemote dbremote =
(DB_UTILITYRemote)dbhome.create();
               user_created=dbremote.getUser();
date_created=Timestamp.valueOf(dbremote.getDate());
               active_date=date_created;
               EB_B2B_COUNTRY_CODEHome home =
(EB_B2B_COUNTRY_CODEHome)ctx.lookup("java:comp/env/EB_B2B_COUNTRY_CODER
emote");
               EB_B2B_COUNTRY_CODERemote remote =
(EB_B2B_COUNTRY_CODERemote)home.create(country_code, country_code_desc,
country_phone_code,active_flag, phone_format_flag,user_created,
date_created, active_date, Sort_Order, user_modified,
date_modified,cntry_tax_prct);
          catch(Exception e)
               System.out.println("Error in Creating COUNTRY
Code "+e);
               throw new Exception("Error in Creating COUNTRY
Code "+e);
     public void setSessionContext(SessionContext context)
          this.context = context;
     public void ejbActivate()
     public void ejbPassivate()
     public void ejbCreate()
     public void ejbRemove()
The jsp client which acces the beans is as follows.
<BODY >
<%@ page language="java" %>
<%@ page import="java.sql.*" %>
<%@ page import="initcontext" %>
<%@ page import = "java.util.*" %>
<%@ page import="DB_UTILITYHome"%>
<%@ page import="DB_UTILITYRemote"%>
<%@ page import="javax.naming.*"%>
<%Connection con=null; %>
<script src="search_getvalues.js">
</script>
<form name=frm1>
<%! int intCount,intI,intRowCount,intJ;
String strtname=new String();
String strhidden=new String("txthdn");
     Statement st;
     ResultSet rs;
     ResultSetMetaData rmeta;
....%>
<%
try
     Context ctx = initcontext.getContext();
     DB_UTILITYHome dbhome =
(DB_UTILITYHome)ctx.lookup("java:comp/env/DB_UTILITYRemote");
     DB_UTILITYRemote dbremote = (DB_UTILITYRemote)dbhome.create();
     con=dbremote.getConnection();
     st=con.createStatement();
     rs=st.executeQuery(strsqlquery);
     rmeta=rs.getMetaData();
intCount=rmeta.getColumnCount();
....... %>
</form>
</BODY>
</HTML>
The resulting exception generated is as follows:
D:\oc4j\j2ee\home>java -jar orion.jar
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e.ear... done.
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e\epool_CountryCode-web.war... done.
Auto-deploying epool_CountryCode (New server version detected)...
Auto-deploying epool_CountryCode-ejb.jar (No previous deployment
found)... done.
Error deploying
file:/D:/oc4j/j2ee/home/demo/messagelogger/messagelogger-ejb.jar homes:
No javax.jms.Destination found a
t the specified destination-location (jms/theTopic) for
MessageDrivenBean com.evermind.logger.MessageLogger
Oracle9iAS (1.0.2.2.1) Containers for J2EE initialized
Auto-deploying epool countryCode example (New server version
detected)...
************************1
************************2
COUNT QUERY :SELECT COUNT(COUNTRY_CODE) FROM BAP_COUNTRY_CODE
QUERY :SELECT
COUNTRY_CODE,COUNTRY_CODE_DESC,COUNTRY_PHONE_CODE,PHONE_FORMAT_FLAG,COU
NTRY_TAX_PERCENT ,SORT_ORDER,ACTIVE
FLAG,ACTIVEDATE FROM BAP_COUNTRY_CODE order by COUNTRY_CODE
Error in selecting Country Code java.rmi.RemoteException: Error
(de-)serializing object: com.evermind.sql.OrionCMTConnec
tion; nested exception is:
java.io.NotSerializableException:
com.evermind.sql.OrionCMTConnection
JB:Error in selecting country cd java.lang.Exception: Error in
selecting Country Code java.rmi.RemoteException: Error (d
e-)serializing object: com.evermind.sql.OrionCMTConnection; nested
exception is:
java.io.NotSerializableException:
com.evermind.sql.OrionCMTConnection
Error in Selecting Records
OrionCMTConnection not closed, check your code!
LogicalDriverManagerXAConnection not closed, check your code!
(Use -Djdbc.connection.debug=true to find out where the leaked
connection was created)
Auto-unpacking
D:\oc4j\j2ee\home\applications\epool_CountryCode\build\epool_CountryCod
e.ear... Error unpacking: IO Error:
The system cannot find the path specified
Error updating application epool_CountryCode: Unable to find/read
assembly info for D:\oc4j\j2ee\home\applications\epool_C
ountryCode\build\epool_CountryCode (META-INF/application.xml)
But if the DBUTILITY session bean is changed to a simple bean and accessed the code works fine and i am able to retrieve the data.Is the problem there because u one session bean cannot access a database connection method from another one or could it be because of the driver???
I hope i am clear.Please revert back in case any more references are needed.
Thanks in advance!!!!!!

/dev/shm on Oracle Linux 6.x to run Oracle 11g R2 - manual configuration?

Hello
We are building a server to run Oracle 11g R2 database (11.2.0.3 x64) on Oracle Linux 6.2 with UEK R2.
Our preference is to use AMM to have Oracle 11g R2 manage memory. We may impose some minium SGA and PGA memory allocations but basically aim to use MEMORY_TARGET to manage overall memory.
By default Linux makes the size of /dev/shm ~50% of server physical RAM, as far as I can tell.
Here is the /etc/fstab entry created by the installation:
tmpfs /dev/shm tmpfs defaults 0 0
Given this Linux server will only run Oracle 11g R2 database and some monitoring software, almost application code will run on the server. The application code will run on the separate application server and is Java based.
Can I change the */etc/fstab* entry for /dev/shm to manually increase the size to take up ~80-90% of the server physical RAM ? Is it a good idea?
The server is 64-bit, the RAM = 64 GB, so I am thinking to manually make /dev/shm to be = ~55GB, leaving ~8GB for other purposes.
Right now it's about 32GB (50%?) if I leave the /dev/shm 'defaults' on.
many thanks

thanks,
I have read the doc (what little there is on this topic).
I have asked on the database forum......
just FYI - below is the proof:
SQL> show parameter mem
NAME                    TYPE     VALUE
hi_shared_memory_address     integer     0
memory_max_target          big integer 4G
memory_target          big integer 0
shared_memory_address     integer     0
SQL> show parameter ga
NAME                    TYPE     VALUE
lock_sga               boolean     FALSE
pga_aggregate_target          big integer 1600M
pre_page_sga          boolean     FALSE
sga_max_size          big integer 3G
sga_target               big integer 1600M
still does not work.
And I cant change memory_max_target = 0 because I get error on startup:
SQL> alter system set memory_max_target=0 scope=spfile;
System altered.
SQL> shutdown immediate;
Database closed.
Database dismounted.
ORACLE instance shut down.
SQL> startup;
ORA-01078: failure in processing system parameters
ORA-00843: Parameter not taking MEMORY_MAX_TARGET into account
ORA-00849: SGA_TARGET 3221225472 cannot be set to more than MEMORY_MAX_TARGET 0.
BUT if memory_max_target is > 0 then alert log says hugepages can not be used
it feels like catch-22.....
thanks
Edited by: yurib on Jun 1, 2012 4:53 PM

How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?

Hi,
I am new in Oracle Enterprise Manager so please tell me How to configured mail Alerts in OEM 12c for WebLogic Servers up/down status?
Thanks,
Sagar Pawar.

Hi Sagar Pawar ,
First you need to set the email notification :
Kindly review :
12c Cloud Control: Steps to Configure Incident Rules to Send Notifications or
Manage Events / Incidents / Problems (Doc ID 1368036.1)
12c Cloud Control: Steps to Configure Email Notification Method (Doc ID 1368262.1)
Regards
Ansari

Weblogic and Oracle VM

Hi all,
Is Weblogic certified to run on an operating system such as Oracle Enterprise Linux (OEL 5.x) that is running on an Oracle VM? Metalink note "Oracle VM General Policy Description [ID 466538.1]" makes me hesitant about Weblogic on Oracle VM. Also the metalink note "Certified Software on Oracle VM [ID 464754.1]" did not seem to give a clear indication about Weblogic.
Thanks,

See these two points (http://www.oracle.com/technetwork/middleware/ias/downloads/fusion-certification-100350.html):
# If an Oracle product has been certified against and is supported on a version of Red Hat Enterprise Linux (RHEL),
it is automatically certified and supported on the corresponding version of Oracle Linux . (e.g., RHEL4->Oracle Linux 4, RHEL5->Oracle Linux 5).
# If a product is supported and certified on Oracle Linux or RHEL, it is also certified and supported in the virtualized
installation of the same version of Oracle Linux or RHEL running on Oracle VM. (e.g. Oracle Linux 4 -> Oracle Linux 4 on Oracle VM,
Oracle Linux 5 -> Oracle Linux 5 on Oracle VM, RHEL4 -> RHEL4 on Oracle VM, RHEL 5 -> RHEL5 on Oracle VM).
Oracle recommends using latest updates levels and Oracle VM versions available.
Looks like Oracle Enterprise Linux (OEL 5.x) that is running on an Oracle VM is certified.

Suddenly WebLogic Server shutting down while doing testing

Hi All,
While we doing testing weblogic server shutting down.Here is the log generated by weblogic.
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> Listen failed. Failure count: 1
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> ListenThread:run failed:
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> **** The WebLogic Server is no longer listening for connections.
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> **** You should probably restart it.
Tue Aug 22 12:38:27 EDT 2000:<I> <WebLogicServer> Server shutdown by system
Tue Aug 22 12:38:27 EDT 2000:<I> <WebLogicServer> Server shutdown commencing NOW
Tue Aug 22 12:38:28 EDT 2000:<I> <HTTP> Destroying servlets in default servlet context.
Tue Aug 22 12:38:28 EDT 2000:<E> <SSLListenThread> ListenThread:run failed:
Please let me know the reason for this.It's very very urgent.
Thanks
Venkat

See case #188305. There is not a whole lot of information there and we really don't like to reproduce this.
If it happens again we will add more info to the case. In the log file we have seen 'class not found' for
weblogic.utils.... classes before it shuts down. Boot it again under no load and it comes up fine.
Mike.
Kumar Allamraju <[email protected]> wrote:
Hmm.. that's interesting.
What version of WLS, SP-level? what 's the avg load that you are putting on WLS? Is it in a clustered environment? what
the min/max heap size, executeThreadCount etc...
Any other details that you can provide us would be helpful for us to debug further.
Kumar
Michael Reiche wrote:
Kumar -
We have seen this as well when load testing. It's hard to ignore the WL server shutting down by itself for no reason.
Mike Reiche
Kumar Allamraju <[email protected]> wrote:
You will only see this, if WLS shutdown is commenced and if you try to PING the server.
you can safely ignore it.
Kumar
Venkat wrote:
Hi All,
While we doing testing weblogic server shutting down.Here is the log generated by weblogic.
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> Listen failed. Failure count: 1
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> ListenThread:run failed:
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> **** The WebLogic Server is no longer listening for connections.
Tue Aug 22 12:38:27 EDT 2000:<E> <ListenThread> **** You should probably restart it.
Tue Aug 22 12:38:27 EDT 2000:<I> <WebLogicServer> Server shutdown by system
Tue Aug 22 12:38:27 EDT 2000:<I> <WebLogicServer> Server shutdown commencing NOW
Tue Aug 22 12:38:28 EDT 2000:<I> <HTTP> Destroying servlets in default servlet context.
Tue Aug 22 12:38:28 EDT 2000:<E> <SSLListenThread> ListenThread:run failed:
Please let me know the reason for this.It's very very urgent.
Thanks
Venkat

How to migrate Solaris 9 running Oracle DB 9i into Solaris 9 brand zone

Dear all,
I am new in Solaris 10 zone. At this moment, my boss wants me to propose how to migrate legacy physical Solaris 9 server running Oracle 9i into container running in Solaris 10 T series machine.
I have down DB to perform full flar image. And I successfully install this flar image into Solaris 9 container.
But , oracle mount point such as /u01, /archivelog,... My DB is very simple, file system only, not raw partition...
May I need to create new DB mountpoints for this container?
And may I need to perform ufsdump and ufsrestore for these mount point?
Hope any one of you let me know.
Thanks,
Mike

Thank you!
Hopefully you also know the solution for my next question to morrow:
<tt>NullPointerException at oracle.jbo.uicli.jui.JULovButtonBinding.actionPerformed(JULovButtonBinding.java:767)</tt>
;o)
bye
TPD

How to create an alert to inform me when weblogic services are down

how to create an alert to inform me when weblogic services are down
Thank you

Hi,
This can be done using Oracle Enterprise Manager grid control. Also you can do it using wlst scripting. Please find below url for details regarding this.
http://middlewaremagic.com/weblogic/?p=5838
If this helps you please mark.
Thanks,
Kishore

Running oracle database xe (express edition) on windows server 2008 r2

Is it supported to run Oracle Database XE on Windows Server 2008 R2?
Database XE is only supported as 32-bit. Current builds of Windows Server 2008 only come in x64 configurations.
Here are the Database XE system requirements for windows:
[http://docs.oracle.com/cd/E17781_01/install.112/e18803/toc.htm]
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).
See:
- [Wikipedia page about windows server 2008 with info on R2|http://en.wikipedia.org/wiki/Windows_Server_2008#Windows_Server_2008_R2]
- [Wikipedia page on "windows 32-bit on windows 64-bit"|http://en.wikipedia.org/wiki/WOW64]
Thanks,
Matt

Hello Matt,
Is it supported to run Oracle Database XE on Windows Server 2008 R2?No.
The docs say that 32-bit windows is required, yet they also say that windows server 2008 is supported.So this means that only 32bit versions of 2008 will be supported.
Windows Server 2008 R2 came out in 2009, and in R2 they eliminated 32-bit OS (though there is the WOW64 subsystem to run 32-bit programs within the 64-bit OS).Which is probably why 2008 R2 is not supported.
You can either take the VM approach and install a 32 bit Windows or 64 bit Linux host, or you can queue in the list of persons waiting for a 64 bit Windows release. See the following thread for details (and the queue) for the latter: {thread:id=2277728}
-Udo

Iphone 4 battery runs completely down with no use in an hour or two.

My Iphone 4 battery, out of the blue, started running completely down in a couple hours with no use. I would take it off the charger reading 100% and not do a thing, but the unit will get pretty warm and the battery drains. The phone is only 3 months old and two days ago I was getting a full day to a day and a half with my ususal usage. Anyone know what is causing this or a fix? I've tried shutting down and rebooting and for software updates? Any advice is appreciated.
Thanks, Josh

One thing to try is cleaning iPhone Dock Port with a clean dry toothbrush.
If still problem and you have Warranty or AppleCare Coverage take iPhone to Apple for resolution.
Another is to clean the dock port again with the toothbrush and a bit of Isopropyll Alcohol, especially clean the pins which are on top of the Dock Mid Rib.
Reset, hold both Home and Power buttons for about 10 seconds until the iPhone restarts itself, ignore the 'slide to power off' slider.
Restore Firmware, at end when iTunes asks, Restore as New, not from backup.

Problem running Oracle Portal to Go (Oracle9i 1.0.2.0.0)

I have installed Oracle9i Application Server WE 1.0.2.0.0 Standard Edition on Windows2000 Professional Edition. I am getting problems regarding running Portal to Go.
The installer said that installation was successful. Moreover I have done the configuration tasks mentioned Oracle9i installation guide under post installation steps for Oracle9i.
But Oracle Portal to Go is not running and returning error message. Are there some other tasks still to perform to configure the Oracle Portal to Go Standard Edition?
Here it is a brief Description of what I have done with the installations process
System: Pentium II 500 MHZ with 256 MB RAM and 15 GB Hard Disk so enough space available for installations.
Windows 2000 professional was freshly installed
All pre installation tasks are done like paging file size is 896MB
Important Installation steps and points are as under (Standard Edition of Oracle 9i Application Server 1.0.2.0.0):
I followed all the steps given in Oracle 9i AS installation guide
On Windows 2000 Installer never asks for reboot before actually installing the Oracle 9i application server (Chapter 4 of installation guide: preparing system for installation: step5: page 5 of 25). So I manually reboot the system
During installation when I reached Database Access Descriptor (DAD) for Oracle Portal. In TNS connect string field for Apache listener Configuration I entered the same name (abc) (chapter 4 of installation guide: installing oracle 9i Application server: step2, 3: page 10,11 of 25) as I was going to use for my Global database name later at database Identification steps (chapter 4 of installation guide: installing oracle 9i Application server: step 4: page 12 of 25)
Note: In an other installation I left the same fields (TNS connect string) blank but of no use.
(Please let me know if I have made any mistake here)
When installation of Oracle9i AS reaches 100% installer opens a command prompt and displays
ORA: 12541 TNS: No Listener
Enter user name:
When I enter SYSTEM as a user name it displays
Password:
I entered manager as password and then it displays
ORA 12560: TNSProtocol adaptor error
And once again it asks for user name and password
I once again enter system as a user and manager as password.
(Please let me know if I have made any mistake here)
After 100% completion of the installation the configuration tools screen appears
(Chapter 4 of installation guide: installing oracle 9i Application server: step 10: page 17 of 25) and the following tasks are performed
Net8 configuration Assistant succeeds
Oracle database configuration assistant succeeds
When The Oracle portal 3.0 configuration Assistant Starts
I hold the installation steps for oracle portal for a while and do some database configuration tasks that are necessary (may be some are not) for installation of portal.
(Please let me know if I have made any mistake here)
For example
Increase the table space size of Users (400 MB), and Temp (100MB) table spaces.
Validated invalid PL/SQL Modules with ULTRP.SQL script
(Please let me know if I have made any mistake here)
Installed dbms_job.sql package as it was mentioned in another guide (Oracle portal-to-Go installation Guide- Release1.0.2: Page 1: last line)
(Please let me know if I have made any mistake here)
Stopped the database and listener
And did some changes as was asked in Oracle portal-to-Go installation Guide- Release1.0.2
Edited the init<SID>.ora file and set the following fields
aq_tm_processes = 1
job_queue_processes = 4 (2 were recommended in guide but I left the already set values)
job_queue_interval = 30
(Please let me know if I have made any mistake here)
Also I did the following too (though these are recommended for Internet file system)
opern_cursors = 300 (in installation guide it is asked 255 but I kept the already set value)
shared_pool_size = 52438800 (50M was suggested and this is more than that)
processes = 200
(Please let me know if I have made any mistake here)
I started the database and listener
Proceeded the installation of Oracle Portal as is described in installation guide for Oracle 9i Application guide 1.0.2.0.0
And successfully completed the installation of Oracle Portal
There were no errors reported on the installer however when I read the installation log some errors were mentioned at the end of the file
Please see the attached log file.
I also completed all the post installation tasks at the end of chapter 4 of Oracle9i Application Server installation guide 1.0.2.0.0 except the configuration of Oracle Internet file system (is it necessary for running Oracle Portal to Go)
When I run the oracle portal to go the following situation is encountered
Working: http://localhost/pls/portal30/admin_/dadentries.htm
Error at: http://localhost/pls/portal30/portal30.home
Error: The preference path does not exist: Oracle.Portal.Page (WWC-51000)
(And this is the main source of confusion)
Working: http://localhost/pls/portal30/admin_/gateway.htm?schema=portal30
Working: http://et-wks-08:5555/invoke/wm.server.admin/adminPage
Are there any other guides and post installation steps still to follow to successfully run this Portal to Go or it is sufficient?
I can also send the installation logs of both Oracle 9i application server (installActions.log and installActions2001-05-28_03-50-56-PM.log) and Oracle portal to Go (install.log).
If you ask, I can send you the installation guides that I have followed and the screen shoots of the error messages for a detail review.
Moreover can anyone please tell me if this version of Oracle 9i Application server is ok or I must try some other version?
Also advise any other if any successful configuration and installation options.
Is it possible to run this portal to go with any other installation options/arrangements/configurations etc?
Any help from anyone will be highly appreciated.
Regards,
Muhammad Usman,
Software Engineer
EssTec Lahore, Pakistan.

Hi,
If you use portal 30 instead of OAS, The installation gives you the Apache ready.
Pablo
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Tarun Singhal ([email protected]):
Hi,
I am trying to implement Portal-to-go application .
For installing Oracle Portal-To-Go 1.0.2 ,I followed oracle
documectation.Now I want to install Portal-To-Go 1.0.2
application using
a) winnt ver. 4.0 (SP3)
b) Oracle 8i
c) Oracle Application server release 4.0.8.1
d) servlet patch set
e) pl/sql cartridges.
(Oracle 8i and OAS 4.0.8.1 are installed with different oracle home directories.)
I have installed winnt , OAS rel.4.0.8.1. both are working fine
.now I want to install servlet Patch set and
pl/sql cartridges.I am unable to locate the information and software for this on oracle site.
can any body tell me why servlet patch set and pl/sql cartridges
required for this application and
from where should i download the servlet patch set software and PL/SQL cartriges
for this version.
Are the above specified softwares are compatible with each other or something extra
required for this installation. Is service pack 3 (winnt 4.0) compatible
with portal-to-go 1.0.2
Can anybody help me please ?
Regards
Preeti Madhukar
([email protected])<HR></BLOCKQUOTE>
null

Look at your iphoto 'page'. On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', I can't get that margin contents back

Look at your iphoto 'page'.
On the left is a margin running vertically down the page and within that margin are shown your files/folders - e.g 'events', 'last 12 months', 'anniversary' etc etc.
Now visualize the 'page' but WITHOUT the margin and the entries in it. It just disappeared while I was editing photos.
I've tried all the 'File', 'Edit', 'View', 'Share' 'Window' & 'Help' options, but no success.
There is no apparent way of calling up onto the screen any photos, folders etc. because I can't get the margin and its contents back onto the iphoto page.
I've tried restoring the page from my backup, where it is all perfect, but that didn't work.
Help please!

Move your cursor to the extreme left hand side of the iPhoto Window until it turns into a '+' and then click and drag right.

Concurrent Manager encountered an error while running Oracle*Report for you

hi
our team is running a report.but encountered
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
Arguments
P_DELV_ID='8022'
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.US7ASCII
Enter Password:
REP-0069: Internal error
REP-57054: In-process job terminated:Terminated with error:
REP-1401: '': Fatal PL/SQL error occurred.
Report Builder: Release 10.1.2.0.2 - Production on Mon Jun 21 11:26:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Program exited with status 1
Concurrent Manager encountered an error while running Oracle*Report for your concurrent request 451508.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
+------------- 1) PUBLISH -------------+
Beginning post-processing of request 451508 on node DEMO at 21-JUN-2010 11:26:17.
Post-processing of request 451508 failed at 21-JUN-2010 11:26:17 with the error message:
One or more post-processing actions failed. Consult the OPP service log for details.
+--------------------------------------+
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 21-JUN-2010 11:26:17
+---------------------------------------------------------------------------+how to solve it?when i am searching in this error in cmctl log there is nothing for it.
i have lnched a SR on this they told to run it by appsrwrun.sh.how to run this report by appsrwrun.sh??
rgrds
Edited by: new2appsdba on Jun 21, 2010 4:19 AM

Hi,
how do you suspect its a OPP related issue??what is OPP?
Enter value for request_id: 451508
old   5: AND fcpp.concurrent_request_id = &&request_id
new   5: AND fcpp.concurrent_request_id = 451508
    REQ_ID NODE_NAME
LOGFILE_NAME
    451508 DEMO
/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[demoap@demo ~]$ vi /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log/FNDOPP94508.txt
[6/20/10 1:37:36 PM] [main] Starting GSF service with concurrent process id = 94508.
[6/20/10 1:37:36 PM] [main] Initialization Parameters: oracle.apps.fnd.cp.opp.OPPServiceThread:2:0:max_threads=5
[6/20/10 1:37:37 PM] [Thread-16] Service thread starting up.
[6/20/10 1:37:37 PM] [Thread-15] Service thread starting up.
[6/21/10 11:12:00 AM] [OPPServiceThread0] Post-processing request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Executing post-processing actions for request 451495.
[6/21/10 11:12:00 AM] [94508:RT451495] Starting XML Publisher post-processing action.
[6/21/10 11:12:00 AM] [94508:RT451495]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:12:00 AM] [UNEXPECTED] [94508:RT451495] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451495.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:12:00 AM] [94508:RT451495] Completed post-processing actions for request 451495.
[6/21/10 11:22:27 AM] [OPPServiceThread0] Post-processing request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Executing post-processing actions for request 451505.
[6/21/10 11:22:27 AM] [94508:RT451505] Starting XML Publisher post-processing action.
[6/21/10 11:22:27 AM] [94508:RT451505]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:22:27 AM] [UNEXPECTED] [94508:RT451505] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451505.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 11:22:27 AM] [94508:RT451505] Completed post-processing actions for request 451505.
[6/21/10 11:26:17 AM] [OPPServiceThread1] Post-processing request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Executing post-processing actions for request 451508.
[6/21/10 11:26:17 AM] [94508:RT451508] Starting XML Publisher post-processing action.
[6/21/10 11:26:17 AM] [94508:RT451508]
Template code: WILPACKSLIP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 11:26:17 AM] [UNEXPECTED] [94508:RT451508] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451508.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
                                                              at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:00:59 PM] [94508:RT451533] Completed post-processing actions for request 451533.
[6/21/10 12:17:51 PM] [OPPServiceThread0] Post-processing request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Executing post-processing actions for request 451573.
[6/21/10 12:17:51 PM] [94508:RT451573] Starting XML Publisher post-processing action.
[6/21/10 12:17:51 PM] [94508:RT451573]
Template code: XXWEBB_EXP_INV
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[6/21/10 12:17:51 PM] [UNEXPECTED] [94508:RT451573] java.io.FileNotFoundException: /t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/out/o451573.out (No such file or directory)
        at java.io.FileInputStream.open(Native Method)
        at java.io.FileInputStream.<init>(FileInputStream.java:106)
at oracle.apps.fnd.cp.opp.XMLPublisherProcessor.process(XMLPublisherProcessor.java:241)
        at oracle.apps.fnd.cp.opp.OPPRequestThread.run(OPPRequestThread.java:172)
[6/21/10 12:17:51 PM] [94508:RT451573] Completed post-processing actions for request 451573.
[6/21/10 12:19:19 PM] [OPPServiceThread0] Post-processing request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Executing post-processing actions for request 451577.
[6/21/10 12:19:19 PM] [94508:RT451577] Starting XML Publisher post-processing action.
[6/21/10 12:19:19 PM] [94508:RT451577]
Template code: WILEXINVREP
Template app: ONT
Language:      en
Territory:     00
Output type:   PDF
[062110_121919525][][EXCEPTION] [DEBUG] ------- Preferences defined PreferenceStore -------
[062110_121919526][][EXCEPTION] [DEBUG] ------- Environment variables stored in EnvironmentStore -------
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.LOW]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [SECURITY_GROUP_ID]:[0]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_INTERVAL]:[300]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_CHARACTERSET]:[US7ASCII]
[062110_121919526][][EXCEPTION] [DEBUG] [RESP_APPL_ID]:[-1]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_LANGUAGE]:[AMERICAN]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919526][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MAX]:[2]
[062110_121919526][][EXCEPTION] [DEBUG] [NLS_NUMERIC_CHARACTERS]:[.,]
[062110_121919526][][EXCEPTION] [DEBUG] [APPS_JDBC_URL]:[jdbc:oracle:thin:@(DESCRIPTION=(ADDRESS_LIST=(LOAD_BALANCE=YES)(FAILOVER=YES)(ADDRESS=(PROTOCOL=tcp)(HOST=demo.webbindia.com)(PORT=1527)))(CONNECT_DATA=(SID=DEMO)))]
[062110_121919527][][EXCEPTION] [DEBUG] [RESP_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_MAX_JDBC_CONNECTIONS]:[500]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_USABLE_CHECK]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [USER_ID]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_TERRITORY]:[AMERICA]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_PLSQL_RESET]:[false]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_CONTEXT_CHECK]:[true]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_FORMAT]:[DD-MON-RR]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_DECAY_SIZE]:[5]
[062110_121919527][][EXCEPTION] [DEBUG] [FND_JDBC_IDLE_THRESHOLD.HIGH]:[-1]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_SORT]:[BINARY]
[062110_121919527][][EXCEPTION] [DEBUG] [NLS_DATE_LANGUAGE]:[AMERICAN]
[062110_121919527][][EXCEPTION] [DEBUG] [LOGIN_ID]:[-1]
[062110_121919528][][EXCEPTION] [DEBUG] ------- Properties stored in Java System Properties -------
[062110_121919528][][EXCEPTION] [DEBUG] [APPLTMP]:[/t01/demoap/inst/apps/DEMO_demo/appltmp]
[062110_121919528][][EXCEPTION] [DEBUG] [java.runtime.name]:[Java(TM) 2 Runtime Environment, Standard Edition]
[062110_121919528][][EXCEPTION] [DEBUG] [sun.boot.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.version]:[1.5.0_08-b03]
[062110_121919528][][EXCEPTION] [DEBUG] [OVERRIDE_DBC]:[true]
[062110_121919528][][EXCEPTION] [DEBUG] [dbcfile]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.vendor]:[Sun Microsystems Inc.]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vendor.url]:[http://java.sun.com/]
[062110_121919528][][EXCEPTION] [DEBUG] [path.separator]:[:]
[062110_121919528][][EXCEPTION] [DEBUG] [APPLCSF]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc]
[062110_121919528][][EXCEPTION] [DEBUG] [java.vm.name]:[Java HotSpot(TM) Server VM]
[062110_121919528][][EXCEPTION] [DEBUG] [file.encoding.pkg]:[sun.io]
[062110_121919528][][EXCEPTION] [DEBUG] [user.country]:[US]
[062110_121919529][][EXCEPTION] [DEBUG] [sun.os.patch.level]:[unknown]
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.name]:[Java Virtual Machine Specification]
[062110_121919529][][EXCEPTION] [DEBUG] [user.dir]:[/t01/demoap/inst/apps/DEMO_demo/logs/appl/conc/log]
[062110_121919529][][EXCEPTION] [DEBUG] [java.runtime.version]:[1.5.0_08-b03]
[062110_121919529][][EXCEPTION] [DEBUG] [CLIENT_PROCESSID]:[30369]
[062110_121919529][][EXCEPTION] [DEBUG] [java.awt.graphicsenv]:[sun.awt.X11GraphicsEnvironment]
[062110_121919529][][EXCEPTION] [DEBUG] [java.endorsed.dirs]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/endorsed]
[062110_121919529][][EXCEPTION] [DEBUG] [os.arch]:[i386]
[062110_121919529][][EXCEPTION] [DEBUG] [JTFDBCFILE]:[/t01/demoap/inst/apps/DEMO_demo/appl/fnd/12.0.0/secure/DEMO.dbc]
[062110_121919529][][EXCEPTION] [DEBUG] [java.io.tmpdir]:[/tmp]
[062110_121919529][][EXCEPTION] [DEBUG] [line.separator]:[
[062110_121919529][][EXCEPTION] [DEBUG] [java.vm.specification.vendor]:[Sun Microsystems Inc.]
[062110_121919529][][EXCEPTION] [DEBUG] [os.name]:[Linux]
[062110_121919529][][EXCEPTION] [DEBUG] [FND_JDBC_BUFFER_MIN]:[1]
[062110_121919530][][EXCEPTION] [DEBUG] [cpid]:[94508]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.jnu.encoding]:[UTF-8]
[062110_121919530][][EXCEPTION] [DEBUG] [oracle.apps.fnd.common.Pool.leak.mode]:[stderr:off]
[062110_121919530][][EXCEPTION] [DEBUG] [java.library.path]:[/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386/server:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/lib/i386:/t01/demoap/apps/tech_st/10.1.3/appsutil/jdk/jre/../lib/i386:/t01/demoap/apps/tech_st/10.1.3/lib32:/t01/demoap/apps/tech_st/10.1.3/lib:/t01/demoap/apps/apps_st/appl/cz/12.0.0/bin:/t01/demoap/apps/apps_st/appl/iby/12.0.0/bin:/t01/demoap/apps/apps_st/appl/pon/12.0.0/bin:/t01/demoap/apps/apps_st/appl/sht/12.0.0/lib]
[062110_121919530][][EXCEPTION] [DEBUG] [java.specification.name]:[Java Platform API Specification]
[062110_121919530][][EXCEPTION] [DEBUG] [java.class.version]:[49.0]
[062110_121919530][][EXCEPTION] [DEBUG] [sun.management.compiler]:[HotSpot Server Compiler]
[062110_121919530][][EXCEPTION] [DEBUG] [queue_appl_id]:[0]
[062110_121919530][][EXCEPTION] [DEBUG] [os.version]:[2.6.18-164.11.1.el5xen]
[062110_121919530][][EXCEPTION] [DEBUG] [LONG_RUNNING_JVM]:[true]
[062110_121919530][][EXCEPTION] [DEBUG] [user.home]:[/t01/demoap]
[062110_121919530][][EXCEPTION] [DEBUG] [user.timezone]:[GMT+05:30]
[062110_121919530][][EXCEPTION] [DEBUG] [java.awt.printerjob]:[sun.print.PSPrinterJob]
--------------------------------------------------------------------------------lots of lines ----------------------------------------
[GC 17474K->10837K(24648K), 0.0037890 secs]
[GC 17685K->11057K(24648K), 0.0035530 secs]
[GC 17905K->11271K(24648K), 0.0029030 secs]
[GC 18119K->11488K(24648K), 0.0024650 secs]
[GC 18336K->11702K(24648K), 0.0023940 secs]
[GC 18550K->11919K(24648K), 0.0025010 secs]
[GC 18767K->12133K(24648K), 0.0024460 secs]
[GC 18981K->12344K(24648K), 0.0024020 secs]
[GC 19192K->12575K(24648K), 0.0024790 secs]
[GC 19423K->12781K(24648K), 0.0025650 secs]
[GC 19629K->12991K(24648K), 0.0024010 secs]
[GC 19839K->13212K(24648K), 0.0024430 secs]
[GC 20060K->13427K(24648K), 0.0024160 secs]
[GC 20275K->13641K(24648K), 0.0024440 secs]
[GC 20489K->13857K(24648K), 0.0024410 secs]
[GC 20705K->14073K(24648K), 0.0024570 secs]
[GC 20921K->14284K(24648K), 0.0024340 secs]
[GC 21132K->14504K(24648K), 0.0024580 secs]
[GC 21352K->14719K(24648K), 0.0024620 secs]
[GC 21567K->14935K(24648K), 0.0024600 secs]
[GC 21783K->15151K(24648K), 0.0024360 secs]
[GC 21999K->15365K(24648K), 0.0024180 secs]
[GC 22213K->15004K(24648K), 0.0204220 secs]rgrds
Edited by: new2appsdba on Jun 22, 2010 1:43 AM
Edited by: new2appsdba on Jun 22, 2010 2:12 AM
Edited by: new2appsdba on Jun 22, 2010 5:37 AM

Program was terminated by signal 6 Concurrent Manager encountered an error while running Oracle*Report

Hi,
My concurrent request failed due to
Program was terminated by signal 6
Concurrent Manager encountered an error while running Oracle*Report
stat_low = 6
stat_high = 0
emsg:was terminated by signal 6
Error occurred during initialization of VM
Could not reserve enough space for object heap
# A fatal error has been detected by the Java Runtime Environment:
# SIGSEGV (0xb) at pc=0xf7176d3e, pid=17695, tid=4096898752
# JRE version: 6.0_32-b05
# Java VM: Java HotSpot(TM) Server VM (20.7-b02 mixed mode linux-x86 )
# Problematic frame:
# V [libjvm.so+0x5f5d3e] ParallelScavengeHeap::tlab_capacity(Thread*) const+0xe
# An error report file with more information is saved as:
# /oracle/tst3/inst/apps/tst3_ora-web2/logs/appl/conc/log/hs_err_pid17695.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
what could be the reason behind this error.
If any one knows this Please help me..
Thank You

Hi,
Please provide your environment details.
Is this a custom program? was this report working fine? If yes, what changes were made lately?
Thanks &
Best Regards,

Weblogic running oracle down

Similar Messages

Maybe you are looking for