Weblogic url direct access restriction

Hi,
I have an OHS configured as a proxy for weblogic server. Here my main objective is that all the requests should pass via webserver only.
I have a requirement like whenever weblogic app url , suppose http://weblogic:7001/app1 is accessed directly, it should redirect to http://webserver:port:7777/app1 and again the request should be forwaded to http://weblogic:port:7001/app1.
In brief blocking direct access to weblogic and making the user access the app1 via webserver. How can I achieve this?
Regards
DPK

Hi,
But I need to achieve that using Weblogic only. Client wants to access weblogic directly and one more thing is only one particular application with root context as /app1 must be accessed via webserver and rest all the applications directly through application server. That is the reason why we are not blocking the port for direct access at network end.

Similar Messages

Allow one URL in Access Restriction?

I'd like to allow internet access for lunch hour only for a group of computers. I've assigned the IP's and set up two access restrictions to DENY for morning and afternoon. Is there a way to allow those computers to have access to just one URL (www.gmail.com) all day long?
Is there a link where these access restrictions have been explained a little more fully than what's available in the WRT610N help screen?
Thank you.
Solved!
Go to Solution.

I am afraid, you cannot allow those computers to have access to just one URL (www.gmail.com) all day long if you have denied them for Internet Access for Morning and Afternoon...

E1000 Access Restrictions Issue

I attempted to create a rule to limit access only to specific URLs during a specific time of day. However, it seems to have blocked all of the internet for the user at that MAC address, outside of the times I had chosen. I double-checked to make sure that the radio button next to 'Allow' was selected in the section that reads: "Internet access during selected days and hours." I don't know what I'm doing wrong. How is the time of day determined by the router? Is there a clock which needs to be set to my time zone somewhere? If so, I've yet to find it. Also, why is it blocking all access to the internet? It should only be blocking 3 URLs.

The Access Restrictions feature of a Linksys router allows you to limit Internet access on your network. You can deny certain computers’ Internet access or block certain applications and services. This article will provide instructions on how to set up Access Restrictions by blocking certain days or hours.
Here is the link for the same: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20b29e54474a4a17aff594cb659747ea_4041.xml&pid=80&r...
The time zone on your router should be set correctly according to the time zone in your current location. This is to ensure that the Parental controls feature will block Internet access on the exact time you specified. To configure the time zone on your router, access your router’s web-based setup page, then go to Basic Setup sub tab under the Setup tab. Click the Time Zone drop-down menu and select the appropriate time zone. Once done, click Save Settings.

Direct Access URLs in Release 2

What is the format for direct access URLs in release 2? I recall seeing somewhere that it had changed.
Thanks.

I found the documentation. It is in the help file /help/sblpath.htm.

How to use Direct Access URL in the FORM tag

I want to substitute the pageid url (/servlet/page?_pageid=161&_dad=portal30&_schema=PORTAL30) with the direct access urls (pls/portal30/url/page/my_page) to address the pageid conflict between development server and production server.
It works perfectly fine in the redirection code such as:
self.location.href="/pls/portal30/url/page/next_page". But I got "Page can not be found" error message when I use it in the <FORM> tag:
<FORM ACTION="/pls/portal30/url/page/next_page" METHOD="POST" NAME="my_form">
Does anyone out there know how to use the direct access url inside the <FORM> tag? I am trying not to write a bunch of code just to retrieve and insert the pageid at the run time.
Thanks in advance.
Arthur

Use condition. If you are validating a record, just out the desired check in the condition field for that specific item.
Thanks
Nagamohan

OWA - Url to directly access Shared Calender ?

Hi Guy's,
we are nearly finished with our migration from EX2007 to 2013.
As is seems that the big problems are solved the small ones arise ;)
maybe someone can help me out:
With the OWA 2007 it was possible to directly access a shared calender with the url:
https://webmail.contoso.com/owa/[email protected]/?cmd=contents&module=calendar
In 2013 this url doesn't work anymore. Is there a new Url or is this not possible within 2013?
We are using TMG to publish the OWA Site.
thanks in advanced
regards
Stefan

Hi Stefan,
I have tested to access the shared calendar by using OWA URL in my Exchange 2013 CU1 environment. When UserA share the calendar to UserB with Reviewer permission, UserB cannot open this calendar directly by using OWA URL. But when I assign UserC full access
permission to UserA’s mailbox, UserC can access UserA’s calendar successful by using OWA URL.
Therefore, if you want to open other’s calendar with folder permission instead of mailbox permission in OWA 2013, we can try the following steps:
1. Login UserB’s mailbox in OWA 2013.
2. Click Calendar in the
upper-right
corner to switch to Calendar pane.
3. Right-click MY CALENDARS > Open Calendar.
4. Type shared calendar in the box under From Directory.
Thanks,
Winnie Liang
TechNet Community Support

Accessing URL directly

Hi,
I want to access a URL directly by disabling proxy setting. my progrme connects URL via proxy only,
Can anyone help me to connect URL by disabling proxy.
my code to connect URLs,
URL url = new URL("file://"+ fileLocator.getPath("/config/GetDataService.wsdl") );
Service service = Service.create(url,svcQName);
Advance Thanks,
Senthil K.

What proxy? There is no such thing as a file: proxy.* I just told you that. Ergo there is nothing for you to avoid.
Specifically, your statement:
my progrme connects URL via proxy onlyis untrue. It might be true of http: URLs, or https: URLs, or ftp: URLs, or all three, but it is not true of all URLs and certainly not of file: URLs.
Just use new URL(url).openConnection().
Although why you are using URLs for files at all is another question. Why is that?

ConfigMgr Clients connection over direct access.

My test client machine is running Windows 8.1 and connecting to network through Direct Access. I am running SCCM 2012 R2 on Windows Server 2012.
Test Machine: NYWIN8
SCCM Server: SCCM01
Domain: demo.local
I would like to understand how configmgr handles clients connecting through direct access. What all functionality is available for such clients?
On my client machine is see following errors:
FSPSTATEMESSAGE.LOG
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
[CCMHTTP] ERROR: URL=HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED
POLICYAGENT.LOG
Policy
http://SCCM01.demo.local/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 is not available.
DATATRANSFERSERVICE.LOG
DTS job {E6FAADEE-F22E-4E89-92EE-C2D9C10C3056} BITS job {9C444FAB-FD3C-4A6B-B8A4-81DA159E4E45} failed to download source file
http://SCCM01.demo.local:80/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 to destination C:\Windows\CCM\Temp\{C9AA0DDC-BD37-442D-A00E-EE7404D47C12}.tmp with error 0x80190194
DTS job {E6FAADEE-F22E-4E89-92EE-C2D9C10C3056} BITS job {9C444FAB-FD3C-4A6B-B8A4-81DA159E4E45} partially completed 0/1 with error 0x80190194 context 5
Software Catalog Update Endpoint
Failed to open portal registry key 'Software\Policies\Microsoft\CCM'. maybe haven't been created yet. Error 0x80070002
WEDMTRACE.LOG
No CCM Identification blob
CAS.LOG
The number of discovered DPs(including Branch DP and Multicast) is 0
SMSCLIUI.LOG
Failed to set DNSSuffix value to the registry.
Are there any issues due to connecting using direct access?

When I try to deploy any software (7-ZIP or Notepad++) to this client I get following error:
The software change returned error code 0x87D00607(-2016410105).
I can deploy same software fine to other machines connecting on LAN.
Server Logs:
Portlctl
PORTALWEB's previous status was 0 (0 = Online, 1 = Failed, 4 = Undefined)
PORTALWEBs http check returned hr=0, bFailed=0
awbsctl
AWEBSVCs http check returned hr=0, bFailed=0
AWEBSVC's previous status was 0 (0 = Online, 1 = Failed, 4 = Undefined)
Client Logs:
CAS
The number of discovered DPs(including Branch DP and Multicast) is 0
CCMEVAL
Client's current MP is http://SCCM01.DEMO.local and is accessible
ClientLocation
Current AD forest name is Demo.local, domain name is Demo.local
Domain joined client is in Intranet
Rotating assigned management point, new management point [1] is: SCCM01.demo.local (7958) with capabilities: <Capabilities SchemaVersion="1.0"><Property Name="SSLState" Value="0"/></Capabilities>
Assigned MP changed from <SCCM01.demo.local> to <SCCM01.demo.local>.
ContentTransferManager
No data since 11/13/2013
CTM job {F6085C09-4C39-489E-A6F6-2C268398B7F2} successfully processed download completion.
DataTransfer
DTS job {B227AB6E-6D0F-4709-B8C6-AA8B66CBBE2D} BITS job {AE61D01C-E251-45FA-8B2C-2E22DDD91016} failed to download source file
http://SCCM01.demo.local:80/SMS_MP/.sms_pol?WRC10000.SHA256:BE60C5A54E508758261E6EDAE80AB21576A214309B9E1E19EE1D5A96C4508EC4 to destination C:\Windows\CCM\Temp\{22619283-47B1-445A-9262-C1FA54AD0F64}.tmp with error 0x80190194
DTS job {B227AB6E-6D0F-4709-B8C6-AA8B66CBBE2D} BITS job {AE61D01C-E251-45FA-8B2C-2E22DDD91016} partially completed 0/1 with error 0x80190194 context 5
Filebits
BranchCache Is Not Enabled
Failed to check PeerDistribution status. NOT able to do branch cache.
FSPSTATEMESSAGE
Failed in WinHttpSendRequest API, ErrorCode = 0x2ee7
[CCMHTTP] ERROR: URL=HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp, Port=80, Options=480, Code=12007, Text=ERROR_WINHTTP_NAME_NOT_RESOLVED
Successfully sent location services HTTP failure message.
InternetProxy
Failed to get proxy for url 'HTTP://SCCM01.demo.local/SMS_FSP/.sms_fsp'. Error 0x87d00215
InventoryAgent
Inventory: 9 Collection Task(s) failed.
SCCLIENT
Event maps to notification type = Application Enforcement Failed (Microsoft.SoftwareCenter.Client.Data.WmiConnectionManager at EventWatcher_EventArrived)
SMSCLIUI
Failed to set DNSSuffix value to the registry.
IPCONFIG /ALL from CLIENT:
Windows IP Configuration
   Host Name . . . . . . . . . . . . : NYWIN8
   Primary Dns Suffix . . . . . . . : demo.local
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : demo.local
   System Quarantine State . . . . . : Not Restricted
Ethernet adapter vEthernet (Internal):
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #3
   Physical Address. . . . . . . . . : 00-15-5D-01-0B-07
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::d3f:4e51:c648:7b26%26(Preferred)
   Autoconfiguration IPv4 Address. . : 169.254.123.38(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.0.0
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 872420701
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
   DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
                                       fec0:0:0:ffff::2%1
                                       fec0:0:0:ffff::3%1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter vEthernet (External):
   Connection-specific DNS Suffix . : home
   Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
   Physical Address. . . . . . . . . : 84-A6-C8-AF-03-DE
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::9cb5:5132:1f47:e7c6%24(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.5(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Thursday, January 2, 2014 1:27:53 PM
   Lease Expires . . . . . . . . . . : Saturday, January 4, 2014 12:27:55 PM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 730113736
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Local Area Connection* 3:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
   Physical Address. . . . . . . . . : 84-A6-C8-AF-03-DF
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Bluetooth Network Connection:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Bluetooth Device (Personal Area Network)
   Physical Address. . . . . . . . . : 84-A6-C8-AF-03-E2
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Ethernet:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
   Description . . . . . . . . . . . : Realtek PCIe FE Family Controller
   Physical Address. . . . . . . . . : E0-DB-55-D2-5E-59
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.home:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . : home
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
Tunnel adapter iphttpsinterface:
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : iphttpsinterface
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes
   IPv6 Address. . . . . . . . . . . : fd64:fc00:d17b:1000:e1a7:9cc8:c3c7:d819(Preferred)
   Temporary IPv6 Address. . . . . . : fd64:fc00:d17b:1000:c598:7f17:e286:369d(Preferred)
   Link-local IPv6 Address . . . . . : fe80::e1a7:9cc8:c3c7:d819%10(Preferred)
   Default Gateway . . . . . . . . . :
   DHCPv6 IAID . . . . . . . . . . . : 369098752
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-EA-A9-CE-E0-DB-55-D2-5E-59
   NetBIOS over Tcpip. . . . . . . . : Disabled
Tunnel adapter isatap.{DC7D2C63-1506-49EC-A40F-AA4E56DE4001}:
   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #3
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Downloading the file from URL directly

Hi,
I need to download the documents directly that are stored in table.
I have table:
FileID, File_content
1 fruits.pdf
2 vegetables.docx
something like this.
I need to sent an URL to the users so that they can directly access the file with the fileid that I have embedded in the link after they provided the login credentials.
Can you please suggest me how I could construct the URL that I need to send to the end users.
Thanks,

Hi,
If your file contents (blob) is in your own table then you will need to write a custom procedure to accomplish the download.
If the files are stored in the Apex supplied wwv_flow_files then you can use the "p" procedure and URL is http://<host>:<port>/apex/p?n=<file_id>
The "p" procedure calls wwv_flow_file.get_file procedure (aka APEX_UTIL.GET_FILE) which is not wrapped. So, take that as your starting code and write your own procedure. Give appropriate grants to users, as with wwv_flow_file, and you are on your way ;).
Do some searching on this forum as well as google, you might find the code !
Regards,

Server 2012 Direct Access Single NIC cant get it to work

Hi,
I am having some real issues with setting up Direct Access with Server 2012 and a Windows 8 client, it simply won’t work at all.
First of all I should describe my setup:
I have an internet connection with a static IPv4 address on the external network adapter of the router
The internal network address (the address of the router which has the internet connection) is 192.168.1.1
Server1 (windows 2008 R2 Standard) has a static IPv4 address 192.168.1.2 and has some ports forwarded from the router (443, 25, 80) this server is a domain controller, email server, and has the DNS, DHCP and
certificate services
Server 2 (Windows 2008 R2 standard) has static IPv4 address 192.168.1.3 it has no ports forwarded from the router as it has no services accessed externally, it is used as a file server and print server, backup
domain controller and backup DNS.
Server 3 (Windows 2012) has static IPv4 address 192.168.1.4 and has the Remote Access server role installed along with all the other default features and roles it requires in the setup process.
These servers have all got an IPv6 address which I assume the server has configured automatically, there has been no deliberate configurations made to disable IPv6
I have no UAG or proxy server or anything else to route packets to internal servers. Just this router which has the option for port forwarding (I assume that’s NAT isn’t it?) sorry don’t know much about that
area.
I go through the setup wizard in remote access to configure direct access, in the external URL I have entered da.mydomain.com and created a host A record in my external domain name providers DNS which points
the da record to my external IP address. The wizard creates all the GPO’s, scoped correctly, and applied to a Windows 8 client. The operational status shows its all working and I got green ticks. However, when I connect the client to the internal network it
doesn’t seem to have correctly got the DA settings. I run the following in powershell
Get-DnsClientNrptPolicy
Nothing displays – at all
Get-NCSIPolicyConfiguration
Description
: NCSI Configuration
CorporateDNSProbeHostAddress
: fdd8:dd4a:ea42:7777::7f00:1
CorporateDNSProbeHostName
: directaccess-corpConnectivityHost.mydomain.local
CorporateSitePrefixList
: {fdd8:dd4a:ea42:1::/64, fdd8:dd4a:ea42:7777::/96, fdd8:dd4a:ea42:1000::1/128,
fdd8:dd4a:ea42:1000::2/128}
CorporateWebsiteProbeURL
: http://directaccess-WebProbeHost.mydomain.local
DomainLocationDeterminationURL : https://DirectAccess-NLS.mydomain.local:62000/insideoutside
Get-DAConnectionStatus
Get-DAConnectionStatus : Network Connectivity Assistant service is stopped or not responding.
At line:1 char:1
+ Get-DAConnectionStatus
+ ~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo
: NotSpecified: (MSFT_DAConnectionStatus:root/StandardCi...onnectionStatus) [Get-DAConnect
   ionStatus], CimException
+ FullyQualifiedErrorId : Windows System Error 1753,Get-DAConnectionStatus
I go into services.msc and find that the network connectivity assistant is not started, it wont start either something must trigger it but I have no idea how to get it triggered to start… this might be my only
source of problem perhaps but on a more network level question:
If I have such ports as 80, and 443 (which I assume DA uses in some form with a public IPv4 internet address) directed at server 1, how does the DA connection get to server 3 which has the DA role installed?
I could create another record on the server which also opens port 443 to server as well as for server 1, but then how would the router know which server to pass the DA connection to if the same port is open for two different servers?
Either way, this first issue is that the client doesn’t seem to have the ability to connect internally correctly yet, so maybe this connectivity service is a good place to start? My understanding is that the
networks icon in the system tray should show that there is a corporate connection, but it doesn’t. also, the client seems to have the NLS certificate in the computer certificate store, so the cert side of things is working and the GPO side is working.
Many thanks
Steve

ahh i see, so just to enlighten me even further...
If a company has two web servers that would mean they would need two different public facing IP addresses so they can route to each internal web server. If, like the big companies have, they
may have many web servers (possibly more than 100) I’m assuming that simply buying more public IP addresses would have a limit, especially since the IPv4 address space is pretty much exhausted. So is this where proxy systems come into play like ISA and Forefront,
is this what they do?
I assume if such a product was implemented you could go down to just one or two public IP addresses, point all traffic to the ISA server and that in turn would do all the routing of packets
to each server behind the NAT/router (probably based on some sort of domain name or sub domain namespace as it’s parameter for forwarding?)
Secondly, what I have done is installed windows server 2012 and used that as a direct access client (I read on another forum that the windows 8 RP doesn’t have the enterprise bits to make this
work). I have got much further with the 2012 server acting as a client (installed on laptop, installed desktop experience and wireless LAN),
but when I run the following command on my DA client I get the following status
Get-DAConnectionStatus
Status:
connectedlocally
Substatus:
none
This appears to work fine, when im connected to the local network. But then I disconnect and run the command again and I get the following:
Status:
Error
Substatus:
NameResolutionFailure
On my router what I did is temporarily disable port 443 going to my original server and instead opened it up pointing to my other server, so 443 traffic should be going to my DA server now, but I don’t understand why its giving the name resolution failure
status. I have a host A record called “da” with my domain hoster, and entered the full domain namespace in the DA wizard as da.mydomain.com (the Host A record has been up there for more than a week so it’s propagated through the net)
So, a bit further but stuck again.

Configuration of Direct Access 2012

Good morning.
I have tried to set up Direct Access from what I see is pretty much a 30-40 minute job, but has turned out to be something of a pain. Having followed the video on youtube for Windows Server 2012 with Basic PKI configuration and Windows 7 clients. I
have set up a working DA server with no issues and all green ticks.
Here's a run down.
I have a DC (2012) with the CA already installed.
I have a virtual DA (2012) set up with the advanced settings.
I have a a TMG 2010 server as the firewall with a Non-Web Publishing rule designed to forward HTTPS requests to the DA on the internal network.
The set up went as planned and I followed the instruction to set up the PKI and all computers have picked up a computer Certificate for the CA so that the internal root is validated.
The Certificates that I chose for the DA server were as follows;
DirectAccess-NLS.mydomain.local
remote.my-external-domain-name.co.uk
both published from my internal CA so that the root of the certificates were valid.
I have a Third party wildcard cert ( *.my-external-domain-name.co.uk ) for TMG to allow other connection such as VPN and web access.
DA Config:
Step 1: Remote Clients
I set up the DA server as per the video, set the DirectAccessClient group, and in the
Network Connectivity Assistant The resource was filled in with the
http://diectaccess-WebProbeHost URL.
Step 2: Remote Access Server
The Network Topology was set to Behind an edge device (with single network adapter), and then is says to type in the 'PUBLIC NAME' used by clients to connect to the Remove Access Server. Here I typed in the external DNS
name remote.my-external-domain-name.co.uk.
Network Adapters had the one ethernet and an IPv6 address. The
Select Certificate sued to authenticate IP-HTTPS connections has the CN=remote.my-external-domain-name.co.uk.
Authentication is set to AD and I used the root certificate of the CA for
use computer certificates. I also Enabled windows 7 client computers to connect via DirectAccess.
Step 3: Infrastructure Servers
Network Location Sevrer had the NLS is deployed on this server with the
DirectAccess-NLS cert.
DNS had the internal domain and the DirectAccess-NLS. the Internal domain was pointing to the IPv4 address of the DA. I read that I need to put the external name suffix of remote.my-external-domain-name.co.uk entry in and pointed that
to the internal DA IPv4 address also.
DNS Suffix List was set automatically and I also added my external domain name just in case.
Managerment was straight forward and I pointed to our System Centre 2012 R2 server.
Upon clicking finish and applying the GPO policies everything went according to plan. All green ticks. I did a GPupdate on the client I was testing and the GPO policies came through.
Now the issue I have is that on the internal network I get the Last Error 0x80190190 unable to connect to server. Now I am sure that this should say active as it is inside the network. I get the same error out side. When I check the DA server for
netsh int https sh int it returns the value that client authentication = NONE. I set it up to use computer certificates and even is I uncheck that it does not change.
It there a straight forward thing I missed or is it to do with publishing in TMG. Internally the direct access client will not connect as it will find the NLS in the internal DNS as I have the host record for both the server FQDN and the DirectAccess-NLS
potining to the IPv4 address. I also have the external remote.my-external-domain-name.co.uk entry in the internal DNS to point to the internal IPv4.
I have opened the ports for 443, 62000 on the DA for the IIS inbound and outbound.
I have a windows 8 client but need to test it as Windows 8 is supposed to work just like that.
What am I doing wrong here?? Any ideas would be much appreciated.

Thank you for this Jordan.
I have now got it working. The next step is to make sure my applications are all using Names rather than IP addresses.
I have basically setup the system as per my original thread that follows, NOT in BOLD.
I have tried to set up Direct Access from what I see is pretty much a 30-40 minute job, but has turned out to be something of a pain. Having followed the video on youtube for Windows Server 2012 with Basic PKI configuration and Windows 7 clients. I have
set up a working DA server with no issues and all green ticks.
Here's a run down.
I have a DC (2012) with the CA already installed.
I have a virtual DA (2012) set up with the advanced settings.
I have a a TMG 2010 server as the firewall with a Non-Web Publishing rule designed to forward HTTPS requests to the DA on the internal network.
The set up went as planned and I followed the instruction to set up the PKI and all computers have picked up a computer Certificate for the CA so that the internal root is validated.
The Certificates that I chose for the DA server were as follows;
DirectAccess-NLS.mydomain.local
remote.my-external-domain-name.co.uk
both published from my internal CA so that the root of the certificates were valid.
I have a Third party wildcard cert ( *.my-external-domain-name.co.uk ) for TMG to allow other connection such as VPN and web access.
DA Config:
Step
1: Remote Clients
I set up the DA server as per the video, set the DirectAccessClient group, and in the Network Connectivity Assistant The resource was
filled in with the http://diectaccess-WebProbeHost URL.
Step
2: Remote Access Server
The Network Topology was set to Behind
an edge device (with single network adapter), and then is says to type in the 'PUBLIC NAME' used by clients to connect to the Remove Access Server. Here I typed in the external DNS name remote.my-external-domain-name.co.uk.
Network Adapters had the one ethernet and an IPv6 address. The Select
Certificate sued to authenticate IP-HTTPS connections has the CN=remote.my-external-domain-name.co.uk.
Authentication is set to AD and I used the root certificate of the CA for use
computer certificates. I also Enabled windows 7 client computers to connect via DirectAccess.
Step
3: Infrastructure Servers
Network Location Sevrer had the NLS
is deployed on this server with the DirectAccess-NLS cert.
DNS had the internal domain and the DirectAccess-NLS. the Internal domain was pointing to the IPv4 address of the DA. I read that I need
to put the external name suffix of remote.my-external-domain-name.co.uk entry in and pointed that to the internal DA IPv4 address also.
DNS Suffix List was set automatically and I also added my external domain name just in case.
Managerment was straight forward and I pointed to our System Centre 2012 R2 server.
Upon clicking finish and applying the GPO policies everything went according to plan. All green ticks. I did a GPupdate on the client I was testing and the GPO policies came through.
I have set up TMG as per the isa.org forum
http://www.isaserver.org/articles-tutorials/general/implementing-windows-server-2012-directaccess-behind-forefront-tmg-part2.html .
@ Jordan - I ensured that I had a separate external IP address for the requests from the clients to TMG as I publish websites internally.
I used a third party wildcard cert for the IP-HTTPS connect part in DA Config Step 2.
All the rest of the DA set up was pretty much out of the box as stated above.

WRT160Nv3 problem with blocking traffic using Access Restrictions

Hi.
I want something quite simple. Block Youtube. I go into "Access Restrictions", choose a name for policy 1, enable it, choose the pc from the pc list, but then...
if a click Deny, all other options will be disabled (greyed out, can't click nor write on them).
Therefore, I can't put the urls I want (youtube).
I tried writing the url with "allow" and then change it to "deny" but it will block ALL traffic.
No good.
So, how do I make a new policy just to block this one URL?
Is it normal that when I click and choose "Deny" everything gets disabled afterwards?
Thanks in advance.
Regards,
Leo
Solved!
Go to Solution.

for internet access policy DENY means to restrict internet access during specified days and hours. this will block ALL internet traffic for the said schedule. website blocking by URL, blocking by means of keyword and blocking applications would then be NOT AVAILABLE as the computers would not have internet access to begin with if you have such a policy disabled.
for your case, you may want to try to set restriction to ALLOW internet access then specify youtube.com under Website Blocking by URL. this would allow computers to have access to the internet all the time (if you have the schedule set to EVERYDAY) or during specific days and hours but NOT have access to youtube.

LAN side firewall settings for Direct Access (Windows Server 2012 R2) in DMZ?

I am currently planning to set up our first Direct Access server (Windows Server 2012 R2). I will be in our firewall DMZ and we will be using the IP-HTTPS listener.
For the Internet facing rule only TCP 443 inbound/outbound is sufficient but for the LAN facing rules (not talking about the Windows server firewall) what would be the recommended firewall rules for a Direct Access server? Is there a best practice guideline
to follow for this? Appreciate any advice or comments. Thank you.

Hi Barkley
Please see this Technet Link which will backup your requirements - https://technet.microsoft.com/en-gb/library/jj574101.aspx
Section Reads -
When using additional firewalls, apply the following internal network firewall exceptions for Remote Access traffic:
ISATAP—Protocol 41 inbound and outbound
TCP/UDP for all IPv4/IPv6 traffic
Also another link from http://www.ironnetworks.com/blog/directaccess-network-deployment-scenarios#.VO3tfvmsVrU
"I have had a number of conversations with security administrators and network architects who have expressed a desire to place the DirectAccess server between two firewalls (firewall sandwich) in order to explicitly control access from the DirectAccess
server to the internal corporate network. While at first this may sound like a sensible solution, it is often quite problematic and, in my opinion, does little to improve the overall security of the solution. Restricting network access from the DirectAccess
server to the internal LAN requires so many ports to be opened on the inside firewall that the benefit of having the firewall is greatly diminished. Placing the DirectAccess server’s internal network interface on the LAN unrestricted is the best configuration
in terms of supportability and provides the best user experience."
Kindest Regards
John Davies
Thank for your reply and information John. I find it somewhat disappointing that Microsoft does not provide much more in the way of documentation and information regarding this topic. I required more information to show to our security team so they will allow
us to have the internal facing NIC not have more restrictive rules in place as it is a security concern.

WRT54GS Access Restriction for WiFi Connected Devices

I have the WRT54GS v4 running with the latest Firmware Version: v1.06.3 -- I am attempting to add Access Restrictions for a few MAC addresses and IP addresses (my kids iPod Touch and laptop).
I am simply wanting to deny total internet access from 9pm to 7am. I have gotten it to work but ONLY for computers that are actually plugged into the router (cat 5 internet cables). All the computers/devices that connect to the router via wifi do not seem to be restricted at all. I am thinking this is an issue with the router in that it ONLY seems to apply the Access Restriction rules to those devices that are actually directly connected by hardwire.
Has any one else noticed this issue for WiFi connected devices? Access Restrictions do not seem to apply to WiFi connected devices.
Please help -- I would hate to have to buy another router.

Are you sure you have enter the correct MAC address or IP address? Wired connections use different MAC and IP addresses then wireless connection...

ABOUT wrt54g 'Access Restriction'

Dear all:
once the duration of rule expired. It won't apply another rule by the time serial.
For example, I set up one of PCs was allowed to access internet between 7:00am~11:55am. This PC could access to internet after 11:55am, even I set another rule for this PC with duration 12:00pm~18:00pm.
Is any solution for my needs.
Beswt Regards
tom
Solved!
Go to Solution.

The Access Restrictions feature allows you to limit Internet access on your network. You can deny access to certain computers, block certain applications and services, and block certain websites by the use of keywords or by the URL at a given time. This feature allows you to customize up to 10 different Internet Access Policies for particular computers, which are identified by their IP or MAC addresses.
Here is the link Implementing Access Restrictions for computers: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=20b29e54474a4a17aff594cb659747ea_4041.xml&pid=80&r...

Weblogic url direct access restriction

Similar Messages

Maybe you are looking for