WEBlogic webserver LOG file examples

Does anyone have a sample Weblogic webserver log file sample ia can use for a test
on another application i am creating?
I am also looking for a portal log file as well . Any help is appreciated. Trying
to create a some reports based on these outputs.
Thanks
Travis Giffin

No, not as I know of. If you are experiencing some problems and you really want to
find more information about a problematic installation, you may do the following to
generate the debug output and you can send that debug info to me:
Windows: pressing down control key at the beginning of the installation until a
debug console window pops up.
Unix Installer ( .bin files): set LAXDEBUG=true in your environment before starting
your installation. tee or script the output to a file:
export LAXDEBUG=true
sh weblogic610.bin -i console 2>&1 | tee buildlog
Pure java installer (.zip file):
touch ia_debug
$JAVA_HOME/java -cp weblogic610.zip -i console 2>&1 | tee buildlog
The upgrade installer should have a clear log to tell you what went wrong in a
installation or uninstallation process. And the installation/uninstallation process
would be rolled back if anything went wrong. The exception is that if you manually
stoped it in some way, which way may catch and process later.
-Dan
Ashique wrote:
Yes, I am trying to do a full installation (in silent mode).
Every software has an installation log. Is that not pretty much standard?
How come weblogic does not have log? If something goes wrong during silent
installation, I would like to see a log file.
Are you sure that there is absolutely no log file for a full installation?
Dan Bai <[email protected]> wrote:
There is no log file for a full installer installation.
The log file for an servicepack upgrade installation lives under $BEA_HOME/logs.
Look into the directory corresponding to that servicepack.
Are you experiencing any problems with the full installer?
-Dan
Ashique wrote:
Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation logfile should
go? Where is it anyway?
I searched few directories do not see where it placed the installationlo file.

Similar Messages

Weblogic server log files !! can i read them through HTTP using browser ?

hi all
i wonder if i can configure weblogic server or use a utility to read my log files in application,i need something like log file browsing in oracle webcenter content .
any advise ?
thanks
Edited by: hsweiss on Jul 18, 2012 9:28 AM

Hi,
I believe you can read log files using admin console. Go to Diagnostic--> logs and select the server which logs you want to see.
Regards,
Shashi

Rolling weblogic.stderr and weblogic.stdout log files

Is there a way of make the -Dweblogic.stderr and -Dweblogic.stdout log files, rotate by size or time? We are running into 100MB+ files because we can't find any documentation about how to rotate these files.
Thanks,
Rajesh

The stdout and stderr output options in weblogic apply to the jvm process using the standard unix standard in/ standard out redirection; therefore, BEA has not included a native method to rotate these files.
However, in weblogic 10, if you place these files in the same directory as the weblogic output log (not to be confused with -D=/path/to/stderr.log and -D=/path/to/stdout.log they will be rotated every time you restart the server.
The other way to get fine-grained log rotation on these files is to use a standard log rotation mechanism such as logrotate: http://linuxcommand.org/man_pages/logrotate8.html
The other option is to address logging using an application framework such as log4j from a development standpoint.
As of right now, these are your only options, unless someone puts in a feature request to BEA.

WebLogic Installation Log File

Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation log file should
go? Where is it anyway?
I searched few directories do not see where it placed the installation lo file.

No, not as I know of. If you are experiencing some problems and you really want to
find more information about a problematic installation, you may do the following to
generate the debug output and you can send that debug info to me:
Windows: pressing down control key at the beginning of the installation until a
debug console window pops up.
Unix Installer ( .bin files): set LAXDEBUG=true in your environment before starting
your installation. tee or script the output to a file:
export LAXDEBUG=true
sh weblogic610.bin -i console 2>&1 | tee buildlog
Pure java installer (.zip file):
touch ia_debug
$JAVA_HOME/java -cp weblogic610.zip -i console 2>&1 | tee buildlog
The upgrade installer should have a clear log to tell you what went wrong in a
installation or uninstallation process. And the installation/uninstallation process
would be rolled back if anything went wrong. The exception is that if you manually
stoped it in some way, which way may catch and process later.
-Dan
Ashique wrote:
Yes, I am trying to do a full installation (in silent mode).
Every software has an installation log. Is that not pretty much standard?
How come weblogic does not have log? If something goes wrong during silent
installation, I would like to see a log file.
Are you sure that there is absolutely no log file for a full installation?
Dan Bai <[email protected]> wrote:
There is no log file for a full installer installation.
The log file for an servicepack upgrade installation lives under $BEA_HOME/logs.
Look into the directory corresponding to that servicepack.
Are you experiencing any problems with the full installer?
-Dan
Ashique wrote:
Where is the installation log file after WebLogic installation?
I am installing WebLogic6.1. Can I specify where the installation logfile should
go? Where is it anyway?
I searched few directories do not see where it placed the installationlo file.

How to configure weblogic log file?

HI
How do i configure Weblogic server log file to log weblogic related information as well as my application?
I need to maintain one log file for weblogic and my application.
Thanks,

Then glassfish instance is either not configured yet or installed somewhere else. Try looking under your user's home directory like C:\Documents and Settings\<username>\Application Data\glassfish\domains\domain1\logs

Weblogic log file error

Hi,
I am getting below two error in my webserver log file. Plz suggest the solutions:-
Error 1:-
<Apr 1, 2012 11:26:27 PM EDT> <Error> <Server> <BEA-002606> <Unable to create a
server socket for listening on channel "DefaultSecure[1]". The address 127.0.0.1
might be incorrect or another process is using port 443: java.net.BindException
: The file access permissions do not allow the specified action..>
<Apr 1, 2012 11:26:27 PM EDT> <Error> <Server> <BEA-002606> <Unable to create a
server socket for listening on channel "Default[2]". The address 0:0:0:0:0:0:0:1
might be incorrect or another process is using port 8880: java.net.BindExceptio
n: The socket name is already in use..>
Error 2:-
####<Apr 2, 2012 8:24:56 AM EDT> <Info> <Health> <pacr-srv-utweb33> <PIA> <weblo
gic.GCMonitor> <<anonymous>> <> <> <1333369496166> <BEA-310002> <3% of the total
memory in the server is free>
####<Apr 2, 2012 8:42:56 AM EDT> <Info> <Health> <pacr-srv-utweb33> <PIA> <weblo
gic.GCMonitor> <<anonymous>> <> <> <1333370576219> <BEA-310002> <30% of the tota
l memory in the server is free>

This is an automatically generated prolog.
# bos530 src/bos/usr/sbin/netstart/hosts 1.1
# Licensed Materials - Property of IBM
# (C) COPYRIGHT International Business Machines Corp. 1985,1989
# All Rights Reserved
# US Government Users Restricted Rights - Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
# IBM_PROLOG_END_TAG
# COMPONENT_NAME: TCPIP hosts
# FUNCTIONS: loopback
# ORIGINS: 26 27
# (C) COPYRIGHT International Business Machines Corp. 1985, 1989
# All Rights Reserved
# Licensed Materials - Property of IBM
# US Government Users Restricted Rights - Use, duplication or
# disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
# /etc/hosts
# This file contains the hostnames and their address for hosts in the
# network. This file is used to resolve a hostname into an Internet
# address.
# At minimum, this file must contain the name and address for each
# device defined for TCP in your /etc/net file. It may also contain
# entries for well-known (reserved) names such as timeserver
# and printserver as well as any other host name and address.
# The format of this file is:
# Internet Address Hostname # Comments
# Items are separated by any number of blanks and/or tabs. A '#'
# indicates the beginning of a comment; characters up to the end of the
# line are not interpreted by routines which search this file. Blank
# lines are allowed.
# Internet Address Hostname # Comments
# 192.9.200.1 net0sample # ethernet name/address
# 128.100.0.1 token0sample # token ring name/address
# 10.2.0.2 x25sample # x.25 name/address
127.0.0.1 loopback localhost # loopback (lo0) name/address
172.25.112.32 pacr-srv-utweb33 pacr-srv-utweb33.cvty.com
172.25.112.33 pacr-srv-utweb34 pacr-srv-utweb34.cvty.com
172.25.108.234 tc11aix tc11aix.cvty.com
172.25.108.143 pacr-srv-upnim01
204.124.108.144 smtp.cvty.com mailhost
204.124.109.66 spyder.cvty.com spyder
204.124.111.234 grackle.cvty.com grackle
172.25.111.21 bittern.cvty.com bittern
172.25.111.22 pacr-srv-utweb01.cvty.com pacr-srv-utweb01
172.25.108.104 pacr-srv-updb01.cvty.com pacr-srv-updb01
172.25.108.105 pacr-srv-updb02.cvty.com pacr-srv-updb02
172.25.111.23 pacr-srv-upweb05.cvty.com pacr-srv-upweb05
172.25.111.24 pacr-srv-upweb06.cvty.com pacr-srv-upweb06
172.25.111.25 pacr-srv-upweb15.cvty.com pacr-srv-upweb15
172.25.108.51 pacr-srv-upweb13.cvty.com pacr-srv-upweb13
172.25.108.52 pacr-srv-upweb14.cvty.com pacr-srv-upweb14
172.25.108.131 pacr-srv-upweb20.cvty.com pacr-srv-upweb20

Posting errors through Log4j in weblogics log file

I am running portlet application , if i want to print all error messages inside weblogic's Log file how can i do it , please explain me full procedure

Step 1. Copy log4j-1.2.9.jar & wllog4j.jar under domain_root/lib folder.
Step 2. Create log4j.xml and drop it under domain_root folder. If you have log4j.xml inside the application(EAR/WAR), I would recommend to move outside EAR/WAR as
changing severity (log level) would require re-deployment. To avoid this, we can move log4j.xml into domain root folder but again the server needs to be bounced.
But there is a fix.
Step 3. Login to weblogic server console. Go to Servers -> Admin Server-> Logging.
Click on advanced mode. Change the logging implementation from JDK to Log4J.
Click save.
Step 4. Activate changes. Re-start the admin server.
This should enable log4j and should write logging into log file mentioned in log4j.xml or properties file.
Hang on! There is a catch here. Say now I want to change the log level from DEBUG into WARN or ERROR.
How do i do?
We go to log4j.xml and change the level.
Now how does this change take into effect? It needs bouncing of the server.
I have given below sample log4j.xml for your reference...
log4j.xml:
<?xml version="1.0" encoding="UTF-8" ?><!DOCTYPE log4j:configuration SYSTEM
"log4j.dtd">
<log4j:configuration>
<appender name="CONSOLE" class="org.apache.log4j.ConsoleAppender">
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern"
value="%d [%t] %-5p %c - %m%n"/>
</layout>
</appender>
<appender name="FILE" class="org.apache.log4j.RollingFileAppender">
<param name="File" value="/log/myApp.log"/>
<param name="Append" value="true"/>
<layout class="org.apache.log4j.PatternLayout">
<param name="ConversionPattern" value="%d{ISO8601} %t %-5p %c{2} - %m%n"/>
</layout>
</appender>
<logger name="org.apache">
<level value="WARN"/>
</logger>
<logger name="org.springframework">
<level value="WARN"/>
</logger>
<root>
<level value="DEBUG"/>
<appender-ref ref="FILE"/>

</root>
</log4j:configuration>
I have disabled log4j to write int
I Followed all these steps , but finally i am getting an empty file myApp.log at specified destination , i want all log messages inside that file when WEBLOGIC starts , so what needs to be done for that

How do look if i have Standby Redo Log files

How do look if i have Standby Redo Log files
example of creating them..

To check existence of Standby Redo Log Files:
SQL> v$standby_log
Name                                      Null?    Type
----------------------------------------- -------- ---------------------------- GROUP#                                             NUMBER
DBID                                               VARCHAR2(40)
THREAD#                                            NUMBER
SEQUENCE#                                          NUMBER
BYTES                                              NUMBER
USED                                               NUMBER
ARCHIVED                                           VARCHAR2(3)
STATUS                                             VARCHAR2(10)
FIRST_CHANGE#                                      NUMBER
FIRST_TIME                                         DATE
LAST_CHANGE#                                       NUMBER
LAST_TIME                                          DATE
SQL> select * from v$standby_log;
no rows selected
SQL>To Create a Standby Redo Log file:
SQL> alter database add standby logfile group 11 ('/u01/app/test.log') size 5m;
Database altered.
SQL> set line 10000
SQL> select * from v$standby_log;
    GROUP# DBID                                        THREAD# SEQUENCE#      BYTES       USED ARC STATUS     FIRST_CHANGE# FIRST_TIM LAST_CHANGE# LAST_TIME
        11 UNASSIGNED                                        0          0    5242880        512 YES UNASSIGNED              0                      0
SQL>and this is how you drop:
SQL> alter database drop standby logfile group 11;
Database altered.
SQL> ! rm /u01/app/test.log
SQL>Asif Momen
http://momendba.blogspot.com
Edited by: Asif Momen on Mar 16, 2010 1:32 PM
Included DROP example

Text log file Monitor

Hi Team,
i have a task to create a log file example SCOM.log, the log has all text entries and the pattern is like below
"[0014 20140724 094527069 SCOM E] ProcessDeposits(), DMGATEWAY internal error in plugin: An exception occurred while processing terminal transaction with HostTransactionID: '4143', tracking fact Id: '3' in the Deposit Gateway Processor task 7. The transaction
will be NOT be re-queued. // "
we need to monitor anything which has "DMGATEWAY internal error in plugin:" string.
sometimes we have greater then 10 entries with in few seconds.
once the log file reaches 10MB all the entries are moved to an archive log file that means the present SCOM.log file is empty and start from line one again.
any suggestions \ solution will be a great help and also let me know if you need any further information
-Vrkumar01
RajKumar

Hi Raj,
Have a read through this post it highlights issues with log monitoring: http://social.technet.microsoft.com/Forums/systemcenter/en-US/827464fd-ff06-495d-8ac6-4a6e337314d3/bug-in-scom-log-file-monitor?forum=operationsmanagergeneral
Have a look at creating a script monitor to monitor the log file:
http://www.opsmanager.se/2012/11/06/text-log-monitoring-part-1/
http://www.opsmanager.se/2012/12/17/text-log-monitoring-in-operations-manager-part-2/
The issue you are experiencing is a limitation of scom which is documented here:
http://support.microsoft.com/kb/2691973/en-us
Snippet from KB:
Additional Information
When monitoring a log file, Operations Manager remembers the last line read within the file (a 'high water mark'). It will not re-read data before
this point unless the file is deleted and recreated, or renamed and recreated, which will reset the high water mark.
If a logfile is deleted and recreated with the same name within the same minute, the high water mark will not be reset, and log entries will
be ignored until the high water mark is exceeded.
An implication of this is that log files that are cleared periodically without being renamed and recreated, or deleted and recreated, will not have entries in them processed until the high water mark from before the log is cleared is exceeded.
Operations Manager cannot monitor 'circular log files' (i.e. log files that get to a certain size or line count, then start writing the newest entries at the beginning of the log) for the same reason. The log file must be deleted or renamed and then recreated,
or the application configured to write to a new log once the current log is filled.
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Weblogic 10.1 web apps merge log4j log files into single log file

Hi
I have deployed multiple web applications on my weblogic (v 10.1 - JDK 1.5.0_12). I am using log4j-1.2.13.jar in a four different web applications.
The location for the files are - WEB-INF\lib\log4j-1.3.13.jar and WEB-INF\classes\log4j.properties
When I deployed all the four webapps in weblogic - we found that all of the apps started writing their logs into the logfile which is configured in the log4j of the first web apps log file. The "first web app" is the web app which is the first app deployed in weblogic.
I have deployed all the four webapps in Tomcat and found that four separate log files get created. Hence, this problem is unique to Weblogic.
Any suggestions on what the problem could be? I have been battling with this issue for over a week- and have exhausted all ideas.
Thank you,
Ronak S.

Hi ,
Read all about your issue here :
Weblogic 10.0 and Log4j classpath problem
Issue is that the Weblogic system classloader includes log4J already..
Use "Filtering ClassLoader" a mechanism to configure deployment descriptors to explicitly specify that certain packages should always be loaded from the application, rather than being loaded by the system classloader.
see: http://e-docs.bea.com/wls/docs100/programming/classloading.html#wp1097187
Example:
Add following to your META-INF/weblogic-application.xml
<prefer-application-packages>
<package-name>org.apache.log4j.*</package-name>
</prefer-application-packages>
Exclude all library packages used within your applcation to have full control over what is used by the application.
regards,
Kris

How has access.log file configured in WebLogic server 10.0?

1.) I am using BEA Weblogic 10.0 and my access.log is not getting updated.
2.) I also need any information as to how this Webblogic server forms chunks (ex....access00011.log,access00012.log) because i have a software called AWStats which merges all these chunks into 1 single access.log file under its subdirectory.
3.) I also need information as to how and where the user can specify/ form his own fields which gets displayed in the access.log
FYI i have 2 servers and i checked under Logging->HTTP->advanced, in both the servers options and configurations are same but in 1 it works fine and access.log is updating but not in the other one.
Kindly let me know i you have any leads into this issue!
Thanks,
Varun

Hi Ravish,
Firstly thanks for the reply.
1.) -----
What you can do is to set the buffer-size-kb parameter value to "0" in config.xml so that it can start logging once the server starts coming up rather then waiting for the default size which is 8kb to pass.
Something like below:
<web-server-log>
<buffer-size-kb>0</buffer-size-kb>
<web-server-log>
For more details check the below link:
Search for: CR302493
http://download.oracle.com/docs/cd/E11035_01/wls100/issues/known_resolved.html
--- for this issue i had browsed throught the forum before posting but in my conf file i have something like this instead of <buffer-size-kb>0</buffer-size-kb>
<web-server>
<web-server-log>
<number-of-files-limited>false</number-of-files-limited>
<log-file-format>extended</log-file-format>
</web-server-log>
</web-server>
So how do i go about the path of debugging now??
2.) -------
If you do not want rotation of access.log then you can just disable it from the below console path just by putting Rotation type as None
Server -> <YOUR_SERVER_NAME> -> Logging (tab) -> HTTP (sub-tab) -> Rotation type: None
---- for this in both my servers i have the settings like this,
Rotation type--> By Size
Rotation File size 5000
Begin rotation time 00:00
rotation interval 24
files to retain 7
and Log file rotation directory is left blank (to get created in same directory)
and also Rotate log file on startup is unchecked.
so??? what do you suggest!?
3.) ------
I also need information as to how and where the user can specify/ form his own fields which gets displayed in the access.log
---- regarding this, in my main server the access.log is getting updated and after 4.8Mb its creating 5Mb chunks. So, for example if the entire log is of 15 Mb then access.log stops updating at 4.98Mb and accesslog.out0001 and accesslog.out0002 is created with 5Mb each but the latest entry will be stored in accesslog.out0002 file. I hope i didn't complicate this :)
Regards,
Varun

WebLogic 9.2 : Log files are not rotating properly

Hello,
In Weblogic 9.2, i have mentioned the log archive directory to rotate log files on the basis of size (2 MB) and also checked the flag to rotate the file on startup of server so there are only two possibilities of rotation that is
1. Either reach file size upto 2 MB
2. On startup of server
Lets take an example step by step
1. I started server, a file e.g. running.out00142 is created.
2. Now running.out size is reached again upto 2 MB then a new file named running.out00143 should be created.
3. yes the file is created into the archive folder but every time when next file is created the first file running.out00142 is getting increase and exists till server restarts
4. Total file contains is 15 but the first file is getting increased and exists till server restart.
Can anyone help me
Thanks in advance
[email protected]

Hi,
That's a weird behaviour...
I had a problem with a non rotating log once and I found out that the domain and the server log were pointing to the same file and then they were locking each other.
Non-rotating logs are usually caused by weblogic being unable to rename the old file, either because of locking or file/directory rights.
Hope that helps.
Cheers,
Vlad
Give points - it is good etiquette to reward an answerer points (5 - helpful; 10 - correct) for their post if they answer your question. If you think this is helpful, please consider giving points

WebLogic 10.3.2.0 hanging at startup after "The server log file is opened."

Hi,
A WebLogic 10.3.2.0 server is hanging at startup. There are no error messages. The last command in the startup window is:
"The server log file <log file dest> is opened. All server side log events will be written to this file."
I think the next line should be:
"Security initializing using security realm realm."
Any ideas on what could be the issue? For instance what resources should be accessed at that point of time? There is sufficient space left on the (virtual machine) disk. The VM configured with 8GB memory. Could it be performance related still?
Following is written to the log file:
####<12.aug.2010 kl 09.47 CEST> <Info> <WebLogicServer> <oim> <> <Main Thread> <> <> <> <1281599254656> <BEA-000214> <WebLogic Server "AdminServer" version:
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 Copyright (c) 1995, 2009, Oracle and/or its affiliates. All rights reserved.> ####<12.aug.2010 kl 09.47 CEST> <Notice> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255312> <BEA-170019> <The server log file ....logs\AdminServer.log is opened. All server side log events will be written to this file.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Log Management> <oim> <> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <> <> <> <1281599255390> <BEA-170023> <The Server Logging is initialized with Java Logging API implementation.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Diagnostics> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599255671> <BEA-320001> <The ServerDebug service initialized successfully.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Store> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599256515> <BEA-280050> <Persistent store "WLS_DIAGNOSTICS" opened: directory="....s\domains\oim\servers\AdminServer\data\store\diagnostics" writePolicy="Disabled" blockSize=512 directIO=false driver="wlfileio2"> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "t3s" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "http" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "https" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257140> <BEA-002622> <The protocol "iiop" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "iiops" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldap" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257156> <BEA-002622> <The protocol "ldaps" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "cluster" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257187> <BEA-002622> <The protocol "clusters" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "snmp" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002622> <The protocol "admin" is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257218> <BEA-002624> <The administration protocol is "t3s" and is now configured.> ####<12.aug.2010 kl 09.47 CEST> <Info> <RJVM> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257468> <BEA-000570> <Network Configuration for Channel "AdminServer"
Listen Address          :7001
Public Address          N/A
Http Enabled          true
Tunneling Enabled     false
Outbound Enabled     false
Admin Traffic Enabled     true>
####<12.aug.2010 kl 09.47 CEST> <Info> <Server> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599257687> <BEA-002609> <Channel Service initialized.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258000> <BEA-000406> <NTSocketMuxer was built on Jan 13 2005 17:47:03
####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000436> <Allocating 3 reader threads.> ####<12.aug.2010 kl 09.47 CEST> <Info> <Socket> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599258078> <BEA-000446> <Native IO Enabled.> ####<12.aug.2010 kl 09.47 CEST> <Info> <IIOP> <oim> <AdminServer> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<WLS Kernel>> <> <> <1281599259500> <BEA-002014> <IIOP subsystem enabled.>
Thanks!!

tried both of these, still having same error as below:
<Sep 8, 2010 1:32:37 PM IST> <Critical> <Security> <BEA-090402> <Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.>
<Sep 8, 2010 1:32:37 PM IST> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
weblogic.security.SecurityInitializationException: Authentication denied: Boot identity not valid; The user name and/or password from the boot identity file (boot.properties) is not valid. The boot identity may have been changed since the boot identity file was created. Please edit and update the boot identity file with the proper values of username and password. The first time the updated boot identity file is used to start the server, these new values are encrypted.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:959)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1050)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:875)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
Caused By: javax.security.auth.login.FailedLoginException: [Security:090304]Authentication Failed: User weblogic2 javax.security.auth.login.FailedLoginException: [Security:090302]Authentication Failed: User weblogic2 denied
at weblogic.security.providers.authentication.LDAPAtnLoginModuleImpl.login(LDAPAtnLoginModuleImpl.java:250)
at com.bea.common.security.internal.service.LoginModuleWrapper$1.run(LoginModuleWrapper.java:110)
at java.security.AccessController.doPrivileged(Native Method)
at com.bea.common.security.internal.service.LoginModuleWrapper.login(LoginModuleWrapper.java:106)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
Truncated. see log file for complete stacktrace
>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FAILED>
<Sep 8, 2010 1:32:37 PM IST> <Error> <WebLogicServer> <BEA-000383> <A critical service failed. The server will shut itself down>
<Sep 8, 2010 1:32:37 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to FORCE_SHUTTING_DOWN>
Pls help me out ASAP...

How to view weblogic log files from a browser

Hi,
I am running WebLogic Server 7.03 on Solaris 8.
I have one Admin and multiple Managed servers running.
Each creates its own log file.
Is there anyway I can access this log files from the browser ?
In Apache, you can create a link from htdocs dir to the logs dir
and then view the log files from the browser. Is there a similar
mechanism in Weblogic server.
A quick response is well appreciated.
Thanks in advance.
-Anil Varma

If you are on a unix system you can do something similar by making an open
directory webapp with symbolic links to the weblogic log directories. I suggest
that you protect that webapp with administration access only.
Sam
Anil Varma wrote:
Hi,
I am running WebLogic Server 7.03 on Solaris 8.
I have one Admin and multiple Managed servers running.
Each creates its own log file.
Is there anyway I can access this log files from the browser ?
In Apache, you can create a link from htdocs dir to the logs dir
and then view the log files from the browser. Is there a similar
mechanism in Weblogic server.
A quick response is well appreciated.
Thanks in advance.
-Anil Varma

Parsing a log file on Weblogic

Hi!
I'd like to know how to get started on parsing a log file present in the default directory of Weblogic (ver 6.1 to be precise).
I thought of using regular expressions, and use java.util.regex , but that is supported from JDK1.5 onwards, whereas WL6.1 supports JDK1.3.
If u can also provide the code template for the same , that would be nice.
Thanks in advance,
Deepthy.

uncle_alice wrote:
String regex = "([^\"\\\\]++|\\\\.)++"{code} The trick is to match anything except a quotation mark or a backslash, OR match a backslash followed by anything (because the backslash is usually used to escape other characters as well, including backslashes).Superb! Thanks! I have to admit I've never used the ++ before (only the greedies), but that's the thing I was looking for.
Just for the completeness, this is the whole thing that's able to parse a log line:
{code}
public class LogParser {
private static final String NOSPACE_PARAM = "([^ ]++)";
private static final String DATE_PARAM = "([^\\]]++)";
private static final String ESCAPED_PARAM = "((?:[^\"\\\\]++|\\\\.)++)";
private static final String PATTERN_STRING = NOSPACE_PARAM
+ " " + NOSPACE_PARAM
+ " " + NOSPACE_PARAM
+ " \\[" + DATE_PARAM + "\\]"
+ " \"" + ESCAPED_PARAM + "\""
+ " " + NOSPACE_PARAM
+ " " + NOSPACE_PARAM
+ " \"" + ESCAPED_PARAM + "\""
+ " \"" + ESCAPED_PARAM + "\""
+ " \"" + ESCAPED_PARAM + "\""
+ " \"" + ESCAPED_PARAM + "\""
+ " \"" + ESCAPED_PARAM + "\""
+ " " + NOSPACE_PARAM
+ " \"" + ESCAPED_PARAM + "\""
+ " \"" + ESCAPED_PARAM + "\""
+ " \"" + ESCAPED_PARAM + "\""
+ " \"" + ESCAPED_PARAM + "\"";
private static final Pattern PATTERN = Pattern.compile(PATTERN_STRING);
public static String[] parse(String line) {
Matcher m = PATTERN.matcher(line);
if (m.matches()) {
String[] result = new String[m.groupCount()];
for (int i = 0; i < m.groupCount();) {
result[i] = m.group(++i);
return result;
return null;
{code}
Any idea about the efficiency of this thing?

WEBlogic webserver LOG file examples

Similar Messages

Maybe you are looking for