Webservice that Accept PDF/File Attachment

Hi,
I need one WebService that is available for use, and that accepts PDF/TXT as attachments or PDF/TXT as one of its parameters.
Kindly tell me about the WebService i m luking for.
Help/support wud be appreciated.
Many thanks.
Jeet.

Hi,
Read these articles they might help you:
http://www.devx.com/ibm/Article/20254
http://www.devx.com/ibm/Article/20254/1763
http://www-128.ibm.com/developerworks/xml/library/x-tippass.html
Regards
Suraj

Similar Messages

Acrobat cannot open the file attachment because your PDF file attachment settings do not allow......

I have an email with an attachment that requires a password the open. I can open the file but embedded in the attachment is another attachment. When I double click attachment I get the following error message. Acrobat cannot open the file attachment because your PDF file attachment settings do not allow this file type to be opened.

You would need to make a change to your registry; see http://www.adobe.com/devnet-docs/acrobatetk/tools/AppSec/attachments.html
Basically you would need to add the .pdf with the permission 2.
Let us know if you need help with that. Either way, make sure to create a System Restore Point before editing the registry.

Generating WSDL for a webservice that accepts attachments

Is there anyway to automaticaly generate a WSDL file for a webservice that accepts
attachments? Seems like the ant tasks and workshop don't work with services using
soap with attachments at all...
Thanks,
Leonardo.

Attachments are supported in WLS 7.0.0.1. You can either
map the attachments to the parameters or use handlers to
to get to attachments.
If the attachments are mapped to parameters the WSDL will
be generated with the appropriate mime binding.
regards,
-manoj
"Leonardo Bueno" <[email protected]> wrote in message
news:3d63e861$[email protected]..
Is there anyway to automaticaly generate a acceptsWSDL file for a webservice
that
attachments? Seems like the ant tasks and workshop don't work with services
using
soap with attachments at all...
Thanks,
Leonardo.
[att1.html]

Can't open a pdf file attachement to e-mail

I canot open an e-mail pdf file attachment..I get a message
You have chosen to open Invoice---pdf
which is: Firefox HTML Document (479kB)
What should Thunderbird do with this file?
Open with Firefox (default)
I do all of the above but nothing happens and I keep getting the same message over andf over again??
Please advise what I should do
Thanksd

Thanks. I disabled Protected Mode, and I was able to open the pdf attachment. Just to make sure, I enabled it and then disabled it again, and when I tried to open the attachment, it did as before – Adobe Reader (Not Responding) and Internal Error message. Tried it several more times, (enable and then disable Protected Mode) and each time, Adobe Reader wouldn’t launch (Not Responding, Internal Error).
Morris Davidson

I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?

I have iPad 4th Generation with iOS 6.1.3 Since my iBooks was updated to version 3.1.1 I cannot open pdf file attachment in my email. When I tap of the attachment, the iBooks icon no longer show itself. Can someone please help?

Thanks for all (Ocean20 & Courcoul) who replied.
Reset the device did not help me but it does triggers me to attempt to resend the PDF file attachment on email--and it works the 2nd time. My problem is now solved.
The Adobe Reader is very helpful--it allows me to scroll through the document easily, unlike iBooks, where I cannot scroll straight up or down.

How do I get iCloud to accept PDF files from my scanner

How do I get ICloud to accept PDF files from my scanner

You might try the third party application Air Docs, I've briefly tried it, but not enough to provide an opinion on it.

Unzip (a zip file that has pdf files and a csv)

Here is my requirement:
Receive a zip file (that contains PDF files and a CSV file) in BizTalk
Each record in CSV has a field which identifies the PDF files (by pdf file name) associated with it
    For Example - record id on each row in CSV file identifies the pdf files associated with it,
                         pdf files have names starting with recordid_sequence number.pdf i.e. 11111_1.pdf, 11111_2.pdf,
                         11111_3.pdf...
Create two new zip files based on record id on the record in CSV file
    For example - one zip file with a new CSV and related pdf files for record id range 1 to 5000
                         another zip file with a new CSV and related pdf filesfor all other record ids
using BTS2010!!
"custom flat file disassembler component" or "use .Net helper class/service" or anything else? custom component should be fine to unzip and extract pdf files and read CSV? can go with another custom component on send to perform split
and zip the files.
Any recommendations?

Hi,
You can built custom pipeline component for unzipping, I have wrote an article for it: http://social.technet.microsoft.com/wiki/contents/articles/20640.biztalk-server-2010-processing-zip-message-having-multiple-type-files.aspx
Also sample is available : http://code.msdn.microsoft.com/windowsdesktop/BizTalk-Server-2010-42a1ae49/view/SourceCode
I hope it helps !!
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level

How to ZIP, PDF file attachment

Hi,
I have an ABAP report requirement to send an email to a user. This program will send an email with PDF attachement. However, the PDF attachment is quite big (9MB) and our email server couldn't handle it (5MB only). Is there any way to ZIP this PDF file attachment?
I am using a SAP release ECC 6.0with OS WinNT. And the ABAP program should be able to run in Foreground/Background.
Thanks for your help in advance...

Hi,
Try this code:
data ca_attach_zip(22)     TYPE c VALUE 'Attch.',
OPEN DATASET va_filename_zip FOR INPUT IN BINARY MODE.
   DO.
     READ DATASET va_filename_zip INTO objbin.
     IF sy-subrc NE 0. EXIT. ENDIF.
     APPEND objbin.
   ENDDO.
    APPEND objbin.
DESCRIBE TABLE objbin LINES tab_lines.
   CLOSE DATASET va_filename_zip.
    DELETE DATASET va_filename.
    DELETE DATASET va_filename_zip.
    DESCRIBE TABLE objbin LINES tab_lines.
    objhead = ca_attach_zip.
    APPEND objhead.
***Creation of the entry for the compressed attachment
   objpack-transf_bin = 'X'.
    objpack-head_start = 1.
objpack-head_num = 1.
    objpack-body_start = 1.
    objpack-body_num = tab_lines.
   objpack-doc_type = ca_zip.
   objpack-obj_name = ca_attach_zip.
objpack-obj_descr = ca_attach_zip.
   objpack-doc_size = tab_lines * ca_255.
    APPEND objpack.
*** Completing the recipient list
    reclist-receiver = va_mail_address.
    reclist-express = 'X'.
    reclist-rec_type = 'U'.
    APPEND reclist.
*** Sending the document
    CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
      EXPORTING
       document_data              = doc_chng
       put_in_outbox              = ca_x
        commit_work                = 'X'
      TABLES
       packing_list               = objpack
        object_header              = objhead
        contents_bin               = objbin
        contents_txt               = objtxt
        receivers                  = reclist
      EXCEPTIONS
        too_many_receivers         = 1
        document_not_sent          = 2
        document_type_not_exist    = 3
       operation_no_authorization = 4
        parameter_error            = 5
        x_error                    = 6
        enqueue_error              = 7
        OTHERS                     = 8.
You have to load your file in the contents_bin table of FM.
You can load the file by OPEN DATASET and the READ DATASET command.
In the object_header you can put some description.
For your info:
1. Zip the data and send as an email attachment
2. How to Zip the data in an internal table
3. Re: How to ZIP a PDF file email attachment
May it helps you.
Regards.
Deepak Sharma.

How is it possible, that a pdf file turns into a psd file while sending with mail

I have send a pdf file as attachment with mail. the file shows correctly as pdf file. but when the file arrived at the addressed location it turned into a psd file. in addition it seems there is a problem sending png and ai files. once those files have arrived through mail I am getting the feedback, that the files are are not scalable, they are fuzzy or completely messed up.
has anyone an idea, where the problem comes from?
thanks for response
angelika

Hello,
toddisalive wrote:
Additionally, I have found an AppleWorks file that could be the script, but it is ZERO bytes in size, and Pages won't even open it, saying that it is not a valid AppleWorks file.
if the size of this file is really ZERO bytes, either the original file contained an empty data fork and a resource fork which was stored elsewhere (*) or the file is too damaged to retrieve anything. Moreover, as AppleWorks never generates file with empty data fork, at least to my knowledge, ....
Concerning the Movie Magic ScreenWriter files, the application seems to exist for Yosemite http://www.write-bros.com/movie-magic-screenwriter.html ( but it seems "expensive" and I do not know if it accepts to import old files )....
(*) maybe in .TOTO or __MACOSX/.TOTO if the filename is TOTO

Error in opening of Pdf file attachment

hi,
i am sending pdf file as an attachment to mail recipient, after receiving that pdf attachment when the user tries to open that attachment he is getting the following error message.
*"Adobe reader could not open file because it is either not a supported file type or because the file has been damaged (for example, it was sent as an email and wasn't correctly decoded"*
Please give me any suggestions to over come this error.
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 15, 2008 3:13 PM

Hi
can you compare your code with attached code , and do required changes if any thing needed
FORM sub_generate_tr_report .
* Internal table declarations
DATA lit_mseg        TYPE STANDARD TABLE OF mseg         INITIAL SIZE 0.
DATA lit_temp        TYPE STANDARD TABLE OF gty_gr_creat INITIAL SIZE 0.
DATA lit_otf         TYPE itcoo    OCCURS 0 WITH HEADER LINE.
DATA lit_tline       TYPE TABLE OF tline    WITH HEADER LINE.
DATA lit_objtxt      TYPE STANDARD TABLE OF solisti1     INITIAL SIZE 0.
DATA lit_objpack     TYPE STANDARD TABLE OF sopcklsti1   INITIAL SIZE 0.
DATA lit_objbin      TYPE STANDARD TABLE OF solisti1     INITIAL SIZE 0.
DATA lit_receiver    TYPE STANDARD TABLE OF somlreci1    INITIAL SIZE 0.
* Workarea declarations
DATA lwa_ctrlop      TYPE ssfctrlop .
DATA lwa_compop      TYPE ssfcompop .
DATA lwa_return      TYPE ssfcrescl .
DATA lwa_tline       TYPE tline     .
DATA lwa_objtxt      TYPE solisti1 .
DATA lwa_objpack     TYPE sopcklsti1.
DATA lwa_doc_data    TYPE sodocchgi1.
DATA lwa_objbin      TYPE solisti1 .
DATA lwa_receiver    TYPE somlreci1 .
DATA lwa_temp        TYPE gty_gr_creat.
* Variable declarations
DATA lv_form_name    TYPE tdsfname   VALUE 'ZZ_PTS446_MASTER_TR_REPORT'.
DATA lv_dlist        TYPE so_obj_nam VALUE 'ZPTS446'.
DATA lv_func_mod     TYPE rs38l_fnam .
DATA lv_len_in       LIKE sood-objlen.
DATA lv_time         TYPE syuzeit    .
DATA lv_time2        TYPE char8      .
DATA lv_date2        TYPE char10     .
DATA lv_info         TYPE so_text255 .
DATA lv_lines        TYPE i          .
DATA lv_buffer       TYPE string     .
* Constants declarations
CONSTANTS lc_x       TYPE char1      VALUE 'X'      .
CONSTANTS lc_c       TYPE so_escape VALUE 'C'      .
CONSTANTS lc_locl    TYPE rspopname VALUE 'LOCL'   .
CONSTANTS lc_printer TYPE tddevice   VALUE 'PRINTER'.
CONSTANTS lc_raw     TYPE so_obj_tp VALUE 'RAW'    .
CONSTANTS lc_pdf     TYPE so_obj_tp VALUE 'PDF'    .
CONSTANTS lc_colon   TYPE char1      VALUE ':'      .
CONSTANTS lc_slash   TYPE char1      VALUE '/'      .
CONSTANTS lc_int     TYPE char3      VALUE 'INT'    .
* Moving record from GIT_GR_CREAT to GIT_TEMP internal table
lit_temp[] = git_gr_creat[].
* Delete record from internal table GIT_TEMP, where STAT is not initial
* DELETE lit_temp WHERE NOT stat IS INITIAL.
DELETE lit_temp WHERE stat EQ 'X'.
DELETE lit_temp WHERE stat EQ 'Q'.
* CLEAR lwa_temp.
* LOOP AT lit_temp INTO lwa_temp.
*    IF lwa_temp-stat EQ 'X'
*    OR lwa_temp-stat EQ 'Q'.
*      DELETE lit_temp FROM lwa_temp.
*    ENDIF.
* ENDLOOP.
IF NOT lit_temp[] IS INITIAL.
*-- Select data from MSEG table
    SELECT matnr         "Material Number
           erfmg         "Quantity in unit of entry
           tbnum         "Transfer Requirement Number
    INTO CORRESPONDING FIELDS OF TABLE lit_mseg
    FROM mseg            "Document Segment: Material
    FOR ALL ENTRIES IN lit_temp
    WHERE mblnr = lit_temp-mblnr
    AND   mjahr = lit_temp-gjahr.
*-- If select successful
    IF sy-subrc EQ 0.
*---- Get name of the function module for smartform 'ZZ_PTS446_MASTER_TR_REPORT'
      CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
        EXPORTING
          formname           = lv_form_name
        IMPORTING
          fm_name            = lv_func_mod
        EXCEPTIONS
          no_form            = 1
          no_function_module = 2
          OTHERS             = 3.
*---- Check function module name is not initial.
      IF NOT lv_func_mod IS INITIAL.
*------ Select default printer based on User settings
        SELECT SINGLE spld
        FROM usr01
        INTO usr01-spld
        WHERE bname = sy-uname.
        IF sy-subrc IS INITIAL.
          lwa_compop-tddest = usr01-spld.   "Device type
        ELSE.
          lwa_compop-tddest = lc_locl.      "Device type
        ENDIF.
        lwa_compop-tdnoprev = lc_x.         "No print preview
        lwa_compop-tdnoprint = lc_x.         "No printing from print preview
        lwa_compop-tdiexit   = lc_x.
*------ Setting control parameters
        lwa_ctrlop-getotf    = lc_x.
        lwa_ctrlop-no_dialog = lc_x.
        lwa_ctrlop-device    = lc_printer.
*------ Call smartform function module
        CALL FUNCTION lv_func_mod
          EXPORTING
            control_parameters = lwa_ctrlop
            output_options     = lwa_compop
          IMPORTING
            job_output_info    = lwa_return
          TABLES
            it_mseg            = lit_mseg
          EXCEPTIONS
            formatting_error   = 1
            internal_error     = 2
            send_error         = 3
            user_canceled      = 4
            OTHERS             = 5.
*------ If smartform function module successful
        IF sy-subrc EQ 0.
*-------- Transfer OTF data to internal table LIT_OTF
          lit_otf[] = lwa_return-otfdata[].
*-------- Convert to PDF
          CALL FUNCTION 'CONVERT_OTF'
            EXPORTING
              format                = 'PDF'
              max_linewidth         = 132
            IMPORTING
              bin_filesize          = lv_len_in
            TABLES
              otf                   = lit_otf
              lines                 = lit_tline
            EXCEPTIONS
              err_max_linewidth     = 1
              err_format            = 2
              err_conv_not_possible = 3
              OTHERS                = 4.
*-------- If above function module is successful
          IF sy-subrc EQ 0.
*---------- Mail body
            CLEAR lwa_objtxt.
            CONCATENATE 'TR Report of RF Inbound Deliveries'(001)
                        'is attached.'(002)
                       INTO lwa_objtxt SEPARATED BY space.
            APPEND lwa_objtxt TO lit_objtxt.
*---------- Append Date and Time into Body of email.
            CLEAR lwa_objtxt.
            MOVE 'File is generated on'(003) TO lv_info.
            lv_time = sy-uzeit.
            CONCATENATE lv_time+0(2)
                        lv_time+2(2)
                        lv_time+4(2)
                        INTO
                        lv_time2 SEPARATED BY lc_colon.
            CONCATENATE sy-datum+4(2)
                        sy-datum+6(2)
                        sy-datum+0(4)
                        INTO lv_date2 SEPARATED BY lc_slash.
            CONCATENATE lv_info
                        lv_date2
                        'At'(004)
                        lv_time2
                        INTO lv_info
                        SEPARATED BY space.
            lwa_objtxt = lv_info.
            APPEND lwa_objtxt TO lit_objtxt.
*---------- Document size
            CLEAR: lv_lines, lwa_objtxt.
            DESCRIBE TABLE lit_objtxt LINES lv_lines.
            READ TABLE lit_objtxt INTO lwa_objtxt INDEX lv_lines.
*---------- Populate packing list for body text
            CLEAR lwa_objpack.
            lwa_objpack-head_start = 1.
            lwa_objpack-head_num   = 0.
            lwa_objpack-body_start = 1.
            lwa_objpack-body_num   = lv_lines.
            lwa_objpack-doc_type   = lc_raw.
            APPEND lwa_objpack TO lit_objpack.
            CLEAR lwa_objpack.
*---------- Mail subject line
            CLEAR lwa_doc_data.
            lwa_doc_data-obj_name = 'TR REPORT'(005).
            lwa_doc_data-obj_descr = 'TR Report of RF Inbound Deliveries'(001).
            lwa_doc_data-doc_size = ( lv_lines - 1 ) * 255 + STRLEN( lwa_objtxt ).
*---------- Populating internal table LIT_OBJBIN
            LOOP AT lit_tline INTO lwa_tline.
              TRANSLATE lwa_tline USING ' ~'.
              CONCATENATE lv_buffer lwa_tline INTO lv_buffer.
            ENDLOOP.
            TRANSLATE lv_buffer USING '~ '.
            DO.
              APPEND lv_buffer TO lit_objbin.
              SHIFT lv_buffer LEFT BY 255 PLACES.
              IF lv_buffer IS INITIAL.
                EXIT.
              ENDIF.
            ENDDO.
*---------- Get total no.of lines of Object table(attachment)
            CLEAR lv_lines.
            DESCRIBE TABLE lit_objbin LINES lv_lines.
*---------- Packing list for attachment
            lwa_objpack-transf_bin = lc_x    .
            lwa_objpack-head_start = 1       .
            lwa_objpack-head_num   = 1       .
            lwa_objpack-body_start = 1       .
            lwa_objpack-body_num   = lv_lines.
            lwa_objpack-doc_type   = lc_pdf .
            lwa_objpack-obj_name = 'TR REPORT'(005).
            lwa_objpack-obj_descr = 'TR_REPORT'(006).
            lwa_objpack-doc_size = lv_lines * 255.
            APPEND lwa_objpack TO lit_objpack.
            CLEAR lwa_objpack.
*---------- Giving the receiver email-id
            CLEAR lwa_receiver.
            lwa_receiver-receiver = lv_dlist.
            lwa_receiver-rec_type = lc_c.
            APPEND lwa_receiver TO lit_receiver.
*---------- Calling the function module to sending email
            CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1'
              EXPORTING
                document_data              = lwa_doc_data
                put_in_outbox              = lc_x
                commit_work                = lc_x
              TABLES
                packing_list               = lit_objpack
                contents_bin               = lit_objbin
                contents_txt               = lit_objtxt
                receivers                  = lit_receiver
              EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
            IF sy-subrc EQ 0.
*------------ Wait upto 2 secounds
              WAIT UP TO 2 SECONDS.
*------------ Call the RSCONN01 (SAPconnect: Start Send Process)
              SUBMIT rsconn01 WITH mode = lc_int
*             WITH output = 'X'
              AND RETURN.
            ENDIF.
          ENDIF.
        ENDIF.
      ENDIF.
    ENDIF.
ENDIF.
REFRESH: lit_mseg    , lit_temp   , lit_otf     , lit_tline   ,
           lit_objtxt , lit_objpack, lit_objbin , lit_receiver.
CLEAR:   lwa_ctrlop , lwa_compop , lwa_return , lwa_tline   ,
           lwa_objtxt , lwa_objpack, lwa_doc_data, lwa_objbin ,
           lwa_receiver.
CLEAR:   lv_func_mod , lv_len_in , lv_time     , lv_time2    ,
           lv_date2    , lv_info    , lv_lines    , lv_buffer   .
Code Formatted by: Alvaro Tejada Galindo on Feb 15, 2008 3:13 PM

How to email a pdf file (attachment with password) using ABAP?

Hi Colleagues,
I
n abap, how do you email a pdf file that contains password?
(pdf with password, not the whole email).
A custom program is created. Inside this program, it
retrieves the spool number and converts it to a pdf file
(using function module '....abapspool...'). No parameter to put password.
I was able to do the above. The problem is how to put password on
the pdf file.
Once the user receives the email (say from hotmail or outlook) with pdf attachment, clicks on the pdf, it will as ask for an attachment.
sap version 4.7.
Questions:
- how to code in ABAP to include the pdf with password in an email
received from hotmail or outlook?
- any function modules or classes that can do the pdf password?
- do we need to install another technology or add-on application or
???? to do it? If yes, do we code in abap?
- any other ideas?
Thanks in advance.
Raymund

Hi Colleagues,
I
n abap, how do you email a pdf file that contains password?
(pdf with password, not the whole email).
A custom program is created. Inside this program, it
retrieves the spool number and converts it to a pdf file
(using function module '....abapspool...'). No parameter to put password.
I was able to do the above. The problem is how to put password on
the pdf file.
Once the user receives the email (say from hotmail or outlook) with pdf attachment, clicks on the pdf, it will as ask for an attachment.
sap version 4.7.
Questions:
- how to code in ABAP to include the pdf with password in an email
received from hotmail or outlook?
- any function modules or classes that can do the pdf password?
- do we need to install another technology or add-on application or
???? to do it? If yes, do we code in abap?
- any other ideas?
Thanks in advance.
Raymund

Sending mail with PDF file attachment ?

Hi All,
I have scenario File ---> Mail, monitoring FTP directory for PDF file and sending using mail attachment.
At the moment i am using JAVA mapping to construct the mail package structure follow all the step in this blog : XI Mail Adapter: An approach for sending emails with attachment with help of Java mapping
it is working if i am using text file but then how to encode the pdf content so i can send throught the mail adapter. ?
Thank you and Best Regards
Fernand

Hi,
Actually, i am using this java code below :
try {
    //     create XML structure of mail package
    String output = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>"
           + "<ns:Mail xmlns:ns=\"http://sap.com/xi/XI/Mail/30\">"
           + "<Subject>" + mailSubject     + "</Subject>"
           + "<From>" + mailSender     + "</From>"
           + "<To>" + mailReceiver     + "</To>"
           + "<Content_Type>multipart/mixed; boundary=\"" + boundary + "\"</Content_Type>"
           + "<Content>";
    out.write(output.getBytes());
    // create the declaration of the MIME parts
    //First part
    output = "--" + boundary + CRLF
           + "Content-Type: text/plain; charset=UTF-8" + CRLF
           //+ "Content-Transfer-Encoding: 8bit" + CRLF
           + "Content-Disposition: inline" + CRLF + CRLF
           + mailContent + CRLF
    //Second part
    + "--" + boundary + CRLF
    + "Content-Type: Application/pdf; name=" + attachmentName + CRLF
    //+ "Content-Transfer-Encoding: base64" + CRLF
    + "Content-Disposition: attachment; filename=" + attachmentName + CRLF + CRLF;
    out.write(output.getBytes());
    //Source is taken as attachment
    copySource(in, out);
    out.write("</Content></ns:Mail>".getBytes());
} catch (IOException e) {
    throw new StreamTransformationException(e.getMessage());
protected static void copySource(InputStream in, OutputStream out)
     throws IOException {
    byte[] bbuf = new byte[in.available()];
    int bblen = in.read(bbuf);
    if (!(bblen < 0)) {
      //String sbuf = new String(bbuf);
      //String encoded = Base64.encode(sbuf);
      // replace all control characters with escape sequences
      //sbuf = sbuf.replaceAll("&", "&");
      //sbuf = sbuf.replaceAll("\"", """);
      //sbuf = sbuf.replaceAll("'", "'");
      //sbuf = sbuf.replaceAll("<", "<");
      //sbuf = sbuf.replaceAll(">", ">");
      out.write(bbuf);
This code working fine with text file but not for pdf file. because i got error in mail adapter :
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: com.sap.aii.messaging.util.XMLScanException: java.lang.NullPointerException; nested exception caused by: com.sap.engine.lib.xml.parser.NestedSAXParserException: Fatal Error: com.sap.engine.lib.xml.parser.ParserException: Unsupported character: 8f(:main:, row:11, col:4)(:main:, row=11, col=4) -> com.sap.engine.lib.xml.parser.ParserException: Unsupported character: 8f(:main:, row:11, col:4)
I guest the problem because the mail adapter doen't accept pdf content insite the mail package.
please advise me
Best Regards
Fernand

Rename PDF file attachment

Is it possible to submit a form via email as a whole PDF but rename the PDF attachment in the process? I am using Acrobat X. I would like to set the PDF file name attachment to the value of a form field.

Yes, I have access but the local machine of every user is a mobile device (specifically an iPad). So I don't think that's possible. So this cannot be done via JavaScript when a button is pressed before the submit operation takes place? The iPad app does allow the execution of JavaScript in the PDF.
--- NEW CODE GOES HERE TO RENAME THE PDF ---
this.submitForm({
    cURL:strMailTo,
    aFields: aSubmitFields,
    cSubmitAs: "PDF"

Problem when trying to send a mail with pdf file attached

When I use this features from Adobe reader, a new mail is opened with pdf file but my Outlook signature is not set automatically. Note that all is right configure in Outlook 2007 for the signature option...
Do you have a solution for this problem ?

someone else reported this (unless it was you) You'll have to insert your sig manually.

Require PDF File attachment in Mail

Hi Experts,
I am doing the Proxy-XI-Mail scenario. I am sending the Mail related data like Content, Content_Type from R/3 to XI and configured the Mail receiver adapter.
R/3 coding:-
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT_TYPE = 'application/pdf;name="filename.pdf"'
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-CONTENT = G_CONTENT
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-FROM = From_Mail.
G_ALERT_INPUT-MT_R3REQUEST_MAIL_SEND-MAIL-TO = To_Mail.
and then calling the client proxy
ID Mail Receiver configu:-
Selected Use Mail Package option
Content encoding base64
Keep attachment option is also selected.
I am geeting the Filename.pdf in mail as attachment.
Problem is:- I am not able to open the attached PDF File and error is:- 'Adobe Reader could not open filename,pdf because it is either not a supported file type ot because the file has been damaged (for example, it was sent as an email attachment and wasn't correctly decoded'
I think some conversions may be required to convert the XML Payload data into PDF file format for the Mail receiver adapter.
Please suggest
Thanks & Regards
Jagesh

Hi Jagesh,
The content type of the Pdf has to be identified, in order to conver the pdf successfully, You need to perform the conversion usign the PayloadSwapBean the Module tab. You use this when you want to receive attachment using Mail adapter. You need to configure few steps in Module Configuration
There you need to mention your MIME header paramenters Content-Type, Content-Description.
How this can be configured and how process with PayloadSwapBean check the below link
http://help.sap.com/saphelp_nw04/helpdata/en/2e/bf37423cf7ab04e10000000a1550b0/frameset.htm
Module Processor
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/cd/5af7c0c994e24fb0d0088443513de2/content.htm
Regading MessageTransformBean, Migrating Dispatcher Classes
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/57/0b2c4142aef623e10000000a155106/frameset.htm
Regards,
Prasanna

Webservice that Accept PDF/File Attachment

Similar Messages

Maybe you are looking for