Websites fail to load unless https
Hi,
Using either Chrome or Safari many websites will fail to load unless I manually change the protocol from http to https.
If I don't - I almost always get:
I have tried both a wired and a wireless connection and also flushing my dnscache.
Any help or thoughts would be appreciated.
Also if it helps debug:
It fails to load a jquery file: http://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.min.js
But it works when I do: https://ajax.googleapis.com/ajax/libs/jquery/1.8.2/jquery.min.js
I tried the port scan utility and it shows (if I just do: http://ajax.googleapis.com)
However, I tried an external port checker and that failed:
Similar Messages
-
Websites failing to load, games lag, but connectio...
Hello,
Hoping someone here might be able to help me out with this one. For the past few days now some web pages havbe been failing to load and games are occasionally disconnecting. However the entire time our connection seems to be remaining stable and connected.
It appears to happen for no reason, and it only affects some websites. bbc.co.uk, google search, and these Broadband forums. Other sites will load perfectly fine, including both the BT speedtest and the ookla speedtest (both of which show our internet speed & ping to be perfectly fine.
I'm at a loss as to what could be causing this issue. I've set the DNS settings in my network adaptor to google DNS to see if that makes a difference, but the fact it affects online gaming in the form of lag makes me thing this is not the case.
I'm hoping to try a traceroute the next time the issue happens, and hopefully have it complete. The problem is by the time we confirm a non-working site and get part way through the traceroute the problem seems to fix itself so we cannot get confirmation of where the issue is coming from.
I'm wondering if anyone else is having similar problems, or has maybe had a similar problem in the past and can suggest any steps or tests I can take to find/remedy this problem?nothing has been posted here about it have you checked the service status page or the status phone line 08001690199 and see if there is any problems in your area
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’ -
Some websites fail to load page on safari
Two websites, Twitter and my bank fail to load properly. The page starts to load then hangs when the blus bar is about a quarter of the way across the address bar. The fault is intermittant - sometimes the page loads fine - and it doesn't seem to be the site as if I use another mac the problem is not replicated on it and the page comes up. I have cleared the cache etc and it doesn't seem to help. Any ideas anyone?
You can try resetting Safari using the option under the Safari menu. You might not want to reset everything, so I suggest looking at the options.
-
Websites would not load unless I move my cursor for Firefox RC
Whenever I load a website, I notice that unless i move my cursor a little, the website would not load. I didnt notice this for previous versions of FF though.
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]] -
Is anyone having issues with loading the Apple website from firefox or safari from a PC. This is an on going issue. What is the solution? I'm tired of looking at the wheel continuously spinning.
Is anyone having issues with loading the Apple website from firefox or safari from a PC
If they are you'll probably find them in the Safari forums, as this forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to your question. -
Safari 6 fails to load secure/https sites
i cant load many password secured sites, because I commonly get a Safari error page stating that Safari cannot establish a secure connection to the server...whats going on with this? Very frustrating to say the least after the long update. Once in a while i get a rectangle in the address bar that says https, and if I click it you see the certificate info. Is there some setting im missing to work smoothly again?
oddly enough, this one works, so there you go...
-
Smart Menus fail to load fully since update to ff33 ok with all other browsers.
After the update of firefox to 33.01 and every one since the menu system on my clubs website fails to load correctly the site is quinton-mc.org.uk it uses the SmartMenu system and works perfectly well ia all other browsers on my Linux machine ,
Present system is
firefox 33.0.3
KDE 4.14.2
Arch Linux Kernel 3.17.2-1
java version "1.7.0_71"
OpenJDK Runtime Environment (IcedTea 2.5.3) (Arch Linux build 7.u71_2.5.3-1-x86_64)
OpenJDK 64-Bit Server VM (build 24.65-b04, mixed mode)
The site loads correctly on the previous version of Firefox 32* Seamonkey Qupzilla Opera Konqueror & chromium
Thanks PeteThanks for your reply cor-el. I had never heard of nor seen the pref network.http.max-connections until I read about it in some of the replies in this support forum. People were saying 256 was the old setting and a new setting of 48 would correct my problem. When I followed the instructions to get to - see - and change the setting I discovered that my network.http.max-connections was already set to 48. I never did this. The only way I can think of that this setting was changed is that it happened by an automatic update to my Firefox browser. So, the problem I have was probably happening while this setting was at 48 all along. It is still set at 48 and I am still having the same problem. I will try as you suggest and set it to 30 and see what happens. I'll let you know the results. That's again for your response.
-
Live Preview - failed to load resource error
Peter-
I was having problems with the Live preview and tried your debugging method.
I received the following in Chrome:
Failed to load resource: http://127.0.0.1:9222/json
Is there a security setting I need to change?
Thanks!
JoshJosh -- What OS are you on?
Thanks!
- Peter -
Applet failed to load when visited using HTTPs protocol with Java 7
We have a java applet on our website which worked for ages. Then Java 7 came out, people installed it. When people with Java 7 visiting our website using HTTPS, the applet failed to load (ClassNotFoundException). The same site and the same applet, when visit using regular HTTP, it works fine.
People with previous version of Java (1.6.x) can see the applet using either HTTP or HTTPs with no problem.
Anything we can do on our side to resolve this problem for people with Java 7 and like to stay with HTTPS?
Googled and didn't see any relevant result. Any pointer would be much appreciated.Thanks for the quick response.
Not much on the stack trace, did a tread dump below.
It is an application requires login, please sent and email to [email protected] and I will sent you the url and login info by email.
Thanks
plugin2manager.parentwindowDispose
Java Plug-in 10.4.0.22
Using JRE version 1.7.0_04-b22 Java HotSpot(TM) Client VM
User home directory = C:\Users\dchen
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
Dump thread stack ...
2012-05-10 17:17:59
Full thread dump Java HotSpot(TM) Client VM (23.0-b21 mixed mode, sharing):
"D3D Screen Updater" daemon prio=8 tid=0x04fa1800 nid=0x530 in Object.wait() [0x0a0df000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at sun.java2d.d3d.D3DScreenUpdateManager.run(Unknown Source)
- locked <0x296c0248> (a java.lang.Object)
at java.lang.Thread.run(Unknown Source)
"ConsoleTraceListener" daemon prio=4 tid=0x04fa0000 nid=0x269c in Object.wait() [0x09c8f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at com.sun.deploy.uitoolkit.ui.ConsoleTraceListener$ConsoleWriterThread.run(Unknown Source)
- locked <0x296c0c90> (a com.sun.deploy.uitoolkit.ui.ConsoleTraceListener$BoundedStringBuffer)
"AWT-EventQueue-1" prio=6 tid=0x04fa2000 nid=0x1730 waiting on condition [0x0a6ce000]
java.lang.Thread.State: RUNNABLE
at com.sun.deploy.uitoolkit.ui.ConsoleHelper.dumpAllStacksImpl(Native Method)
at com.sun.deploy.uitoolkit.ui.ConsoleHelper.dumpAllStacks(Unknown Source)
at com.sun.deploy.uitoolkit.impl.awt.ui.SwingConsoleWindow$2.actionPerformed(Unknown Source)
at javax.swing.JComponent$ActionStandin.actionPerformed(Unknown Source)
at javax.swing.SwingUtilities.notifyAction(Unknown Source)
at javax.swing.JComponent.processKeyBinding(Unknown Source)
at javax.swing.KeyboardManager.fireBinding(Unknown Source)
at javax.swing.KeyboardManager.fireKeyboardAction(Unknown Source)
at javax.swing.JComponent.processKeyBindingsForAllComponents(Unknown Source)
at javax.swing.JComponent.processKeyBindings(Unknown Source)
at javax.swing.JComponent.processKeyEvent(Unknown Source)
at java.awt.Component.processEvent(Unknown Source)
at java.awt.Container.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.KeyboardFocusManager.redispatchEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.preDispatchKeyEvent(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(Unknown Source)
at java.awt.DefaultKeyboardFocusManager.dispatchEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Window.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
at java.awt.EventQueue.access$000(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.awt.EventQueue$3.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue$4.run(Unknown Source)
at java.awt.EventQueue$4.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
"TimerQueue" daemon prio=4 tid=0x04f9e000 nid=0x3e0c waiting on condition [0x09f3f000]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x24620900> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(Unknown Source)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
at java.util.concurrent.DelayQueue.take(Unknown Source)
at javax.swing.TimerQueue.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
"AWT-EventQueue-4" prio=4 tid=0x04fa1400 nid=0x255c waiting on condition [0x0945f000]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x246209e8> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(Unknown Source)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
at java.awt.EventQueue.getNextEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
"Applet 5 LiveConnect Worker Thread" prio=4 tid=0x04f9f400 nid=0x3994 in Object.wait() [0x05d9f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at sun.plugin2.main.client.LiveConnectSupport$PerAppletInfo$LiveConnectWorker.run(Unknown Source)
- locked <0x24620ac8> (a java.lang.Object)
at java.lang.Thread.run(Unknown Source)
"AWT-EventQueue-0" prio=6 tid=0x04f9fc00 nid=0x3b2c waiting on condition [0x0608f000]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x2979ab70> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(Unknown Source)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
at java.awt.EventQueue.getNextEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)
"AWT-Shutdown" prio=6 tid=0x04f9e800 nid=0x244c in Object.wait() [0x0669f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at sun.awt.AWTAutoShutdown.run(Unknown Source)
- locked <0x2979acd8> (a java.lang.Object)
at java.lang.Thread.run(Unknown Source)
"TimerQueue" daemon prio=6 tid=0x04fa0c00 nid=0x3914 waiting on condition [0x0a65f000]
java.lang.Thread.State: WAITING (parking)
at sun.misc.Unsafe.park(Native Method)
- parking to wait for <0x29c27340> (a java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject)
at java.util.concurrent.locks.LockSupport.park(Unknown Source)
at java.util.concurrent.locks.AbstractQueuedSynchronizer$ConditionObject.await(Unknown Source)
at java.util.concurrent.DelayQueue.take(Unknown Source)
at javax.swing.TimerQueue.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
"JVM[id=2]-Heartbeat" daemon prio=6 tid=0x04f9ec00 nid=0x3c98 in Object.wait() [0x0687f000]
java.lang.Thread.State: TIMED_WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at sun.plugin2.main.server.HeartbeatThread.run(Unknown Source)
- locked <0x2979a7a0> (a sun.plugin2.main.client.PluginMain$Heartbeat)
"Browser Side Object Cleanup Thread" prio=6 tid=0x04f9d000 nid=0x3ce4 in Object.wait() [0x0710f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x2979a958> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(Unknown Source)
- locked <0x2979a958> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(Unknown Source)
at sun.plugin2.main.client.LiveConnectSupport$BrowserSideObjectCleanupThread.run(Unknown Source)
"CacheCleanUpThread" daemon prio=6 tid=0x04f9dc00 nid=0x2500 in Object.wait() [0x0655f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x2979a978> (a com.sun.deploy.cache.CleanupThread)
at java.lang.Object.wait(Object.java:503)
at com.sun.deploy.cache.CleanupThread.run(Unknown Source)
- locked <0x2979a978> (a com.sun.deploy.cache.CleanupThread)
"CacheMemoryCleanUpThread" daemon prio=6 tid=0x04f9d400 nid=0x1ac4 in Object.wait() [0x0611f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x2979aa68> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(Unknown Source)
- locked <0x2979aa68> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(Unknown Source)
at com.sun.deploy.cache.MemoryCache$LoadedResourceCleanupThread.run(Unknown Source)
"SysExecutionTheadCreator" daemon prio=6 tid=0x04f9c800 nid=0x3ff4 in Object.wait() [0x0660f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at sun.plugin.util.PluginSysUtil$SysExecutionThreadCreator.run(Unknown Source)
- locked <0x2979aa88> (a sun.plugin.util.PluginSysUtil$SysExecutionThreadCreator)
"AWT-Windows" daemon prio=6 tid=0x04f8f000 nid=0x3480 runnable [0x026af000]
java.lang.Thread.State: RUNNABLE
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(Unknown Source)
"Java2D Disposer" daemon prio=10 tid=0x04f8d000 nid=0x1920 in Object.wait() [0x064ff000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(Unknown Source)
- locked <0x2979ad68> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(Unknown Source)
at sun.java2d.Disposer.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
"Java Plug-In Pipe Worker Thread (Client-Side)" daemon prio=6 tid=0x04f8a000 nid=0x580 runnable [0x0617f000]
java.lang.Thread.State: RUNNABLE
at sun.plugin2.os.windows.Windows.ReadFile0(Native Method)
at sun.plugin2.os.windows.Windows.ReadFile(Unknown Source)
at sun.plugin2.ipc.windows.WindowsNamedPipe.read(Unknown Source)
at sun.plugin2.message.transport.NamedPipeTransport$SerializerImpl.read(Unknown Source)
at sun.plugin2.message.transport.NamedPipeTransport$SerializerImpl.readByte(Unknown Source)
at sun.plugin2.message.AbstractSerializer.readInt(Unknown Source)
at sun.plugin2.message.transport.SerializingTransport.read(Unknown Source)
at sun.plugin2.message.Pipe$WorkerThread.run(Unknown Source)
"Timer-0" prio=6 tid=0x04f3d800 nid=0x2c38 in Object.wait() [0x0521f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
- waiting on <0x2979b0a8> (a java.util.TaskQueue)
at java.lang.Object.wait(Object.java:503)
at java.util.TimerThread.mainLoop(Unknown Source)
- locked <0x2979b0a8> (a java.util.TaskQueue)
at java.util.TimerThread.run(Unknown Source)
"traceMsgQueueThread" daemon prio=6 tid=0x04f19c00 nid=0x3b50 in Object.wait() [0x054cf000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at com.sun.deploy.trace.Trace$TraceMsgQueueChecker.run(Unknown Source)
- locked <0x298209e0> (a java.util.ArrayList)
at java.lang.Thread.run(Unknown Source)
"Service Thread" daemon prio=6 tid=0x04e80c00 nid=0x2930 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"C1 CompilerThread0" daemon prio=10 tid=0x04e7c400 nid=0x2648 waiting on condition [0x00000000]
java.lang.Thread.State: RUNNABLE
"Attach Listener" daemon prio=10 tid=0x04e7b000 nid=0x1b5c runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"Signal Dispatcher" daemon prio=10 tid=0x04e77c00 nid=0x1bd0 runnable [0x00000000]
java.lang.Thread.State: RUNNABLE
"Finalizer" daemon prio=8 tid=0x022e1000 nid=0x3d00 in Object.wait() [0x04c5f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.ref.ReferenceQueue.remove(Unknown Source)
- locked <0x2979b330> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(Unknown Source)
at java.lang.ref.Finalizer$FinalizerThread.run(Unknown Source)
"Reference Handler" daemon prio=10 tid=0x022df800 nid=0x3644 in Object.wait() [0x04bdf000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at java.lang.Object.wait(Object.java:503)
at java.lang.ref.Reference$ReferenceHandler.run(Unknown Source)
- locked <0x2979a0c8> (a java.lang.ref.Reference$Lock)
"main" prio=6 tid=0x0036d800 nid=0x2f40 in Object.wait() [0x00a2f000]
java.lang.Thread.State: WAITING (on object monitor)
at java.lang.Object.wait(Native Method)
at sun.plugin2.message.Queue.waitForMessage(Unknown Source)
- locked <0x2979b3b8> (a sun.plugin2.message.Queue)
at sun.plugin2.message.Pipe$1.run(Unknown Source)
at com.sun.deploy.util.Waiter$1.wait(Unknown Source)
at com.sun.deploy.util.Waiter.runAndWait(Unknown Source)
at sun.plugin2.message.Pipe.receive(Unknown Source)
at sun.plugin2.main.client.PluginMain.mainLoop(Unknown Source)
at sun.plugin2.main.client.PluginMain.run(Unknown Source)
at sun.plugin2.main.client.PluginMain.main(Unknown Source)
"VM Thread" prio=10 tid=0x022de400 nid=0x3cc0 runnable
"VM Periodic Task Thread" prio=10 tid=0x04ea9000 nid=0x3fd4 waiting on condition
.main.client.PluginMain.run(Unknown Source)
at sun.plugin2.main.client.PluginMain.main(Unknown Source)
"VM Thread" prio=10 tid=0x022de400 nid=0x3cc0 runnable
"VM Periodic Task Thread" prio=10 tid=0x04ea9000 nid=0x3fd4 waiting on condition
Done. -
I have been uploading pictures of booksd to ABE.com for ages. I am able to view these images on the site. Today, without warning, I am unable to do this. Coincidentally, I note that I can no longer view film footage on the BBC news pages. The Latest Headlines column is also showing "Live Bookmark Feed failed to load". Please help.
If images are missing then check that you aren't blocking images from some domains.
*Check the permissions for the domain in the current tab in "Tools > Page Info > Permissions"
*Check that images are enabled: Tools > Options > Content: [X] Load images automatically
*Check the exceptions in "Tools > Options > Content: Load Images > Exceptions"
*Check the "Tools > Page Info > Media" tab for blocked images (scroll through all the images with the cursor Down key).
If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
Make sure that you do not block third-party images permissions.default.images
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
Try to remove the current Latest Headlines feed and create a new feed.<br />
You can visit http://fxfeeds.mozilla.com/en-US/firefox/headlines.xml -
HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2
Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command
prompt...) DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because
it has no enabled devices associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then
restore the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command prompt...)
DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because it has no enabled devices
associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then restore
the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help... -
Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>
<!--<binding name="webHttpBindingWithJsonP" transferMode="StreamedRequest" />-->
<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>
<!--<protocolMapping>
<add binding="basicHttpsBinding" scheme="https" />
</protocolMapping>-->
<!--<serviceHostingEnvironment aspNetCompatibilityEnabled="true" multipleSiteBindingsEnabled="true" />-->
</system.serviceModel>
<system.webServer>
<!--<modules runAllManagedModulesForAllRequests="true"/>-->
<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>
<!--
To browse web app root directory during debugging, set the value below to true.
Set to false before deployment to avoid disclosing web app folder information.
-->
<!--<directoryBrowse enabled="true"/>-->
</system.webServer>
</configuration>
Thanks,
SwathiRight on - I have done that a number of times.
-
Firefox fails to load websites after using Thunderbird
When using my new laptop HP Pavilion dm 1, Windows 7 Home Premium, Firefox 4 fails to load any websites after I have used Thunderbird v3.1.9. The only solution is to reboot which is becoming very annoying. I use Firefox 4 and Thunderbird on 3 HP Desktops using Windows 7 Pro without this problem occurring. I have uninstalled Firefox and Thunderbird and then reinstalled and the problem persists. I even did a complete recovery of the laptop starting fresh as it came from the factory and the problem continues. I have disabled and erased all history. I have tried safe mode. Nothing seems to work. I did note on laptop that default manager 2.2 is not enabled (comes up false in troubleshooting log)...not sure if that's a problem as I am traveling in Dubai and cannot match it against my desktop settings. So long as I do not open Thunderbird I have no problems with Firefox. Could there be some kind of conflict between these programs?
Reload web page(s) and bypass the cache in such cases.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC) -
When trying to load bank account https it says dom menu failed to load
hi when trying to go into a bookmark for bank account, https i get a error that says dom menu failed to load?
Try to access that page via the main page (www.ncsecu.org) and don't use a link (bookmark) to a specific page.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]] -
FireFox images not loading in local folders (firebug error-Failed to load given URL)
I am having difficulty when developing websites in local folders (Windows7 computer). The webpages I make are showing images in IE9 & Chrome but not FireFox (nor Safari nor Opera).
In FireFox I get Firebug "Failed to load given URL" prompt.
I am using html5 & external linked css stylesheet & the html/html5 & css code validates.
I have tried using rel path ie images/image.gif & absolute path references ie C:/RPD_Programming/RPD WEB/amwcsnew/index.html
and have tried using % to eliminate whitespace in references but I cannot get FireFox to display images!!
This has been a problem for me for around 2 weeks now & is very frustrating. Some website code/templates I have downloaded from the internet display the websites properly (ie load images fine) when I open them locally in FireFox. Why does my code not allow the images to load in FireFox (paths/permissions/other issue??). How can I fix this?
Here is example css & html5 not displaying images from local directory in FireFox (fine in IE9 & Chrome):
style.css
/* CSS Document */
/*Basic Reset*/
margin:0;
padding:0;
html{
/* HTML5 display-role reset for older browsers */
article, aside, details, figcaption, figure,
footer, header, hgroup, menu, nav, section {
display: block;
body{
width:1200px;
margin:0 auto;
header{
height:450px;
background:url("C:/RPD_Programming/RPD WEB/amwcsnew/images/header.gif");
background-repeat:no-repeat;
#mid{height:750px;
background:url('C:/RPD_Programming/RPD_WEB/amwcsnew/images/mid.gif')no-repeat;
footer{height:286px;
background:url('C:/RPD_Programming/RPD WEB/amwcsnew/images/footer.gif')no-repeat;
index.html
<!doctype html><!-- simplified doctype works for all previous versions of HTML as well -->
<!--html5 template from www.impressivewebs.com_modified by RPD-->
<!-- Paul Irish's technique for targeting IE, modified to only target IE6, applied to the html element instead of body -->
<!--[if lt IE 7 ]><html lang="en" class="no-js ie6"><![endif]-->
<!--[if (gt IE 6)|!(IE)]><!--><html lang="en" class="no-js"><!--<![endif]-->
<head>
<!-- simplified character encoding -->
<meta charset="utf-8">
<title>amwcs-new</title>
<meta name="description" content="amwcs">
<meta name="author" content="rpd">
<!-- Delete these two icon references once you've placed them in the root directory with these file names -->
<!-- favicon 16x16 -->
<link rel="shortcut icon" href="/favicon.ico">
<!-- apple touch icon 57x57 -->
<link rel="apple-touch-icon" href="/apple-touch-icon.png">
<!-- Main style sheet. Change version number in query string to force styles refresh -->
<!-- Link element no longer needs type attribute -->
<!-- <link rel="stylesheet" type="text/css" media="all" href="css/style.css" />-->
<link rel="stylesheet" href="css/style.css?v=2">
<!-- Modernizr for feature detection of CSS3 and HTML5; must be placed in the "head" -->
<!-- Script tag no longer needs type attribute -->
<script src="js/modernizr-1.6.min.js"></script>
<!-- Remove the script reference below if you're using Modernizr -->
<!--[if lt IE 9]>
<script src="http://html5shiv.googlecode.com/svn/trunk/html5.js"></script>
<![endif]-->
</head>
<!-- If possible, use the body as the container -->
<!-- The "home" class is an example of a dynamic class created on the server for page-specific targeting
<body class="home">-->
<body>
<!-- ******************************************************************** -->
<!-- The content below is for demonstration of some common HTML5 elements -->
<!-- More than likely you'll rip out everything except header/section/footer and start fresh -->
<!-- First header has an ID so you can give it individual styles, and target stuff inside it
<header id="hd1"> No way Hosay-not by default! Default is <header> tag (RPD edit) -->
<header>
<!-- "hgroup" is used to make two headings into one, to prevent a new document node from forming -->
<hgroup>
<h1>amwcs</h1>
<h2>tagline</h2>
</hgroup>
<!-- Main nav, styled by targeting "#hd1 nav"; you can have more than one nav element per page -->
<nav>
<ul>
<li><a href="#">Home</a></li>
<li><a href="#">About</a></li>
<li><a href="#">Services</a></li>
<li><a href="#">Contact</a></li>
</ul>
</nav>
</header><!--End header & or #hd1 header div id if used-->
<!-- This is the main "div" that wraps the content generically; don't use "section" for this -->
<div id="mid">
<!-- The first of two "section" elements for demo purposes; optional class added for styling (hs1 = "home section 1") -->
<section class="hs1">
<!-- Each section should begin with a new h1 (not h2), and optionally a header -->
<!-- You can have more than one header/footer pair on a page
<header>
<h1>This is a Page Sub Title</h1>
</header> -->
<p>Some content...</p>
<!-- The h2 below is a sub heading relative to the h1 in this section, not for the whole document -->
<h2>Demonstrating EM and STRONG</h2>
<!-- "strong" is used for SEO and contextual hierarchy -->
<p><strong>This text will have more importance (SEO-wise and contextually)</strong></p>
<!-- "b" is used for stylistic offset of text that's NOT important contextually -->
<p><b>This text has visual importance but has no contextual or SEO importance</b></p>
<!-- "em" is used for colloquial-style emphasis -->
<p>This is a <em>very</em> colloquial expression.</p>
<!-- There can be multiple footers on each page -->
<!-- Secondary headers and footers don't necesarily need ids; they can be targeted via context (i.e. ".hs1 footer")
<footer>
<!-- incite a riot: http://24ways.org/2009/incite-a-riot
<p>Author: <cite>Louis Lazaris</cite></p>
</footer> -->
</section><!-- .hs1 -->
<!-- This is another section; doesn't have header/footer because it's not required -->
<section class="hs2">
<h1>This is another section</h1>
<p>This is some dummy content</p>
</section><!-- .hs2 -->
</div><!-- #mid -->
<!-- The "aside" element could be a sidebar (outside an article or section) -->
<!-- Or it could reference other tangentially-related content within an article or section
<aside id="sidebar">
<p>Sidebar content</p>
</aside>-->
<!-- The main footer has an ID for targeting, similar to the main header -->
<footer >
<p>copyright © year</p>
</footer>
<!-- Remote jQuery with local fallback; taken from HTML5 Boilerplate http://html5boilerplate.com -->
<!-- jQuery version might not be the latest; check jquery.com -->
<script src="http://ajax.googleapis.com/ajax/libs/jquery/1.4.4/jquery.min.js"></script>
<script>!window.jQuery && document.write(unescape('%3Cscript src="js/jquery-1.4.4.min.js"%3E%3C/script%3E'))</script>
<!-- Below is your script file, which has a basic JavaScript design pattern that you can optionally use -->
<!-- Keep this and plugin scripts at the bottom for faster page load; combining and minifying scripts is recommended -->
<script src="js/general.js"></script>
<!-- asynchronous analytics code by Mathias Bynens; change UA-XXXXX-X to your own code; http://mathiasbynens.be/notes/async-analytics-snippet -->
<!-- this can also be placed in the <head> if you want page views to be tracked quicker -->
<script>
var _gaq = [['_setAccount', 'UA-XXXXX-X'], ['_trackPageview']];
(function(d, t) {
var g = d.createElement(t),
s = d.getElementsByTagName(t)[0];
g.async = true;
g.src = ('https:' == location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js';
s.parentNode.insertBefore(g, s);
})(document, 'script');
</script>
</body>
</html>
I am most grateful for help & look forward to replies & fixing this-thanks
NB
Is there a FireFox guide/manual in pdf format available anywhere? I have not found one yet & a FireFox reference might be useful!You need to use file:// as the protocol instead of C:/. The latter may never work (C:\ might).
Where is the main HTML located ?
Easiest if to store the images in a sub folder of the location because you can't go back via ../ beyond that root location for security reasons.
See:
*http://kb.mozillazine.org/Links_to_local_pages_do_not_work
Maybe you are looking for
-
I know you can rewire Ableton into Logic but is there a way to use Apple loops in Ableton?
-
Extreme as File Server vs. Mac Mini G4
Hello all, I have an iMac 24" 2008 and a Macbook White 2010 which I use for work both at home and away. I have all my work files and databases on an external hard disk plugged into the Airport Extreme as a file server. I can also access this when awa
-
Good evening everyone, I have a file of numbers to be printed via AirPrint, in print preview the contents of the paper takes up all the space on a page, but when I go to print, the content is always smaller leaving 2/3 cm unused ? advice?
-
Send report result to mobile phone
Hi, Is it possible to send report result information to a mobile phone via SMS/text? Thanks, Milind
-
ICal new Reminders don't save data without 'apply' button
When I create an iCal reminder, entries are lost switching fields, unless I click 'apply' button after EVERY change. Example: enter title field, then tab or click to date field; result = title field is lost, reverting to default "New Reminder". This