WebSphere MQ JMS adapter

I've been stuck on this for nearly a week, think I better ask here...
After adding the following JAR file from MQ6 client to com.sap.aii.af.jmsproviderlib:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
Unlike other people who has a option of WebSphere MQ JMS Provider, I only have WebSphere MQ(non-JMS) and I'm unable to connect to the queue. Only "Adapter has not provided any status information about this channel" is returned.
I can't find any useful error message for troubleshooting, does anyone can give me a hand on this?

Hi..Robert,
in sender side u will get the web sphere MQ(non-jms) and in receiver side u will get the web sphere MQ jms provider..
u have mentioned the parameters as jms queue ,channel name and queue manager name in capital letters only..
regards,
Pasi..
pls reward points if it helpful...

Similar Messages

Configuration of JMS adapter Using WebSphereMQ

Hi All
I am trying Http to JMS scenario.
I configured my JMS adapter as receiver
Trasport protocol: Web sphereMQ JMS provider.
Queue Connection Factory : com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java class : com.ibm.mq.jms.MQQueue
IP address : 172.17.50.150Where I installed Web Sphere MQ
In SXMB_MONI my http client sends msg without any error
But In runtime work bench whn I observe Adapter monitoring I got error as
Receiver channel. Details: MQJMS2005: failed to create MQQueueManager for '172.17.50.150:QM_APPEL'
PLZ ell me d coz
Thanks

Hi,
for the configuration of a Websphere MQ JMS adapter, you will have to also give details like, Queue Manager Name, channel name, etc.
Just check this link for the same,
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/content.htm
Provide all the correect details and it will hopefully work.
Regards,
Bhavesh

How to install Oracle AS JMS Adapter on Websphere (or any J2EE server)

Hi,
We have a requirement in which the client wants to connect to the OC4J JMS running in SOA Suite (Oracle Application Server 10.1.3.4).
They are using Websphere. We are exploring ways by which they can connect from Websphere application to Oracle AS OC4J JMS.
One option is - deploy the Oracle AS JMS adapter in Websphere and then use it to connect to the OC4J JMS.
Please let us know if this is the right approach. Also, if so, kindly point to the documentation regarding how to install the JMS adapter on 3rd party J2EE servers such as websphere.
Rgds,
Amit

While searching the knowledge base I found the following note, which seems to suggest that Oracle Adapters are not deployble on other J2EE application servers:
Support For Jca Adapter In Other Application Servers Like Jboss [ID 1114738.1]
==============================================
From the statements in documentation it may be implied that jca adapter should be deployable on any application server that is compliant with j2ee/jca. Please note that this cannot be implied at this time and jca adapter cannot be deployed on other application servers than OAS in BRM 731 due to some technical constraints. So currently we can support only OAS and not JBoss or another application server , in BRM 731. The documentation will be updated accordingly to reflect this.

Problem with Send using JMS Adapter with Websphere MQ

Hi,
We have two scenarios using JMS Adapter with MQ:
1. File->PI->MQ
This works fine and drop the file in MQ correctly.
2. MQ->PI->File
This gives an error reading from the queue: (see highlighted in the log below). It correctly connects to the queue name. But it fails with the message "Could not begin a AF transaction".
Our PI version is 7.0 SP 13
Websphere MQ Version 6.0.
Any idea what could be wrong?
Cluster Node Administration Information Availability Times
Cluster Node Details for Channel CC_JMS_MQ_Sender
Short Log
In the Last 4 Hours Server 0 15_92786
_Sucessfully connected to destination 'queue:///MMPP.PLM.FGH41? CCSID=37&targetClient=1'_
Line 1 / 1
Processing Details for Cluster Node Server 0 15_92786
Type
Time Stamp
Message ID
Explanation
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d Error while processing message '2e6206f0-7925-11dd-bc02-0003bae50b4d'; _detailed error description: com.sap.aii.adapter.jms.api.channel.filter.MessageFilterException: Could not begin a AF transaction: TxManagerException: Unable to open transaction: com.sap.engine.services.ts.exceptions.BaseSystemException at com.sap.aii.adapter.jms.core.channel.filter.TxManagerFilter.filterSend(TxManagerFilter.java:103) ..._
9/2/08 2:27:28 PM 2e6206f0-7925-11dd-bc02-0003bae50b4d XI message ID corresponding to JMS message with ID 'ID:414d512071736431202020202020202047d9462024028b02' will be created as a new GUID with value '2e6206f0-7925-11dd-bc02-0003bae50b4d'
Amith Dharmasiri

Checked the drivers installed in :
/usr/sap/<SID>/DVEBMGS<SYSNO>
/j2ee/cluster/server0/bin/ext/com.sap
.aii.af.jmsproviderlib
They are available and properly added to aii_af_jmsproviderlib.sda.
The drivers are:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
These were installed per OSS note 747601.
Any other suggestions, why retrieving from MQ doesn't work?

Problem in JMS-Adapter with CharacterSet Websphere MQ

Hi,
we have the following scenario:
JMS -> PI -> File
We have a local Websphere MQ Queue Manager and the follwoing configuration in our sender adapter:
Transport-Protocol: WebSphere MQ (non JMS)
Message-Protocol: JMS 1.x
ConnectionFactory: com.ibm.mq.jms.MQQueueConnectionFactory
Java-class Queue: com.ibm.mq.jms.MQQueue
CCSID: 819
Transport: TCP/IP
JMS-conform: WebSphere MQ (non JMS)
In the local queue manager the messages (XML-Messages with header <?xml version="1.0" encoding="ISO-8859-1"?>) have characterSet 819 (ISO-8859-1). That's correct. You can open the files with XMLSpy and it works.
When we receive the messages by our JMS Sender Adapter all the character seems to be in UTF-8 and I don't know why. All the special characters are wrong cause the header of the XML-message shows ISO-8859-1 but all the signs are decoded in UTF-8.
In the other direction (JMS Receiver adapter, File -> PI - JMS) we have the same problem.
We create a ISO-8859-1 message in mapping (and it is really ISO-8859-1) and send it via JMS Receiver Adapter to the local message queue. But there the message arrives in UTF-8 encoding. I don't understand this.
Does anybody know what could be the cause for this?
Does the JMS adapter convert the messages from ISO-8859-1 into UTF-8?
Are there any parameters we have to set?
I hope anybody has an idea what's wrong.
Regards
Thorsten
Edited by: Thorsten Hautz on Oct 12, 2010 5:42 PM

Hi,
thanks a lot for your replies.
our driver settings are correct (as I can see).
I removed value 819 from CCSID, but we have the same effect.
The messages in the local queue manager are TextMessages in XML.
Does anybody know, if we need the standard modules (ConvertJMSMessageToBinary and ConvertBinaryToXMBMessage) in this case?
Is it possible to set the CCSID for the message payload anywhere in the configuration?
The CCSID in the Source tab doesn't have any influence to the encoding of the payload message, only to the header data.
Regards
Thorsten

JMS adapter fails to open IBM WebSphere MQ Manager V6 Remote Queue

Hello,
We are trying to connect to a Remote Queue with the SAP PI 7.0 SP9 JMS adapter to IBM WebSphere MQ V6 on Linux SLES9 x86_64.
We did deployed the JMS-adapter with the V6 native libaries on SAP PI.
In the Communication Channel we use the Adapter Type = JMS, Sender, Transport Protocol = WebSphereMQ(non-JMS).
The MQ Queue Manager is on the same server as SAP PI so we use localhost, Server Port, Queue Manager Name, Channel Name and JMS Queue Name
The <sid>adm user is a member of the mqm group.
When I check the RWB I see this fault message:
Error during channel initialization; exception trace: javax.jms.JMSException: MQJMS2008: failed to open MQ Queue at ...
and also
com.ibm.mq.MQException: MQJE001: Completion Code 2, Reason 2045
When we lookup the reason 2045 we get this explaination on MQ:
MQRC_OPTION_NOT_VALID_FOR_TYPE
We also have a type = Receiver Communication Channel on the same MQ Queue Manager that one is working fine.
Please advise!
Best regards,
Mike Laanen

Mike,
check whether the Queues are created and activated if it done. then check whether you have authorization for those queues.
Regards
Sreeram.G.Reddy

Error in JMS Adapter while communicating with WebSphere MQ 7.5

Guys,
I am trying to integrate JMS Adapter with WebSphere MQ.
JMS Adapter : 14.0.2.0
WebSphere MQ : 7.5
I am getting error like below. Please help me out. Thanks
17/04/14 16:25:49 java.lang.NoSuchMethodError: com.ibm.msg.client.jms.JmsSession.createQueue(Ljava/lang/String;)Ljavax/jms/Queue;
at com.ibm.mq.jms.MQSession.createQueue(MQSession.java:708)
at com.acta.adapter.jms.MQConfigHandler.getQueue(MQConfigHandler.java:74)
at com.acta.adapter.jms.JMSAdapter.getQueue(JMSAdapter.java:547)
at com.acta.adapter.jms.JMSGetOperation.start(JMSGetOperation.java:398)
at com.acta.adapter.sdk.OperationWrapper.runOperation(OperationWrapper.java:171)
at com.acta.adapter.sdk.OperationWrapper.run(OperationWrapper.java:94)
at java.lang.Thread.run(Thread.java:662)
I have added following jars in class path of the adapter.

Problem solved after removing j2ee.jar file from classpath !

Anyone successfully deployed BPEL + JMS Adapter (for MQ) to WebSphere?

Anyone successfully deployed BPEL Process Manager + JMS Adapter (for MQ) to WebSphere (i.e not OAS/OC4J)?
If you have - I would love to see a valid example of the ra.xml and oc4j-ra.xml files in your jca/JmsAdapter.rar file - to see how you configured access for the JMS Adapter to your remote MQ queues.
Thank you
Dennis

Hi Garima,
Please check the following:
1. Add dhbcore.jar also to aii_af_jmsproviderlib.sda and deploy it.
2. Check the existence of your JMS drivers.
3. Check the following link and Install the drivers as the way it is mentioned in the guide 'How To Install And Configure External Drivers For JDBC & JMS'
https://websmp204.sap-ag.de/~form/sapnet?_SHORTKEY=01200252310000071155&_SCENARIO=01100035870000000202
There are 4 files which needs to be added. http://help.sap.com/saphelp_nw04/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/frameset.htm
Any of the above solutions should help you solve the problem.
Regards,
Abhy

JMS Adapter Websphere MQ problem

Guys,
I have a problem with websphere MQ using JMS adapter to send messages to XI.
When I send a message with 2 line items to MQ, XI JMS adapter is picking up only the first line item always and second line item just dissapears.
MQ --> XI --> System1
Any suggestions?

Hi,
see the below links
/people/alessandro.guarneri/blog/2006/01/04/jms-sender-adapter-handling-too-short-lines
/people/william.li/blog/2006/11/13/how-to-use-saps-webas-j2ees-jms-queue-in-exchange-infrastructure
content conversion
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f02d12a7-0201-0010-5780-8bfc7d12f891
SAP help-
http://help.sap.com/saphelp_nw2004s/helpdata/en/cd/d85a9d6fab7d4dbb7ae421f710626c/content.htm
Regards
Chilla..

JMS Adapter: Sending data with WebSphere MQ Client to XI

Hi,
I want to send data from the WebSphere MQ Client to the XI. Is this possible and what do I have to do except configuring the JMS queues in Visual admin?
Thanks in advance
Dominic

hi
xi jms adapter will read/write data frm queue.
but u want to access the jms queues in XI WAS frm ur MQ client
..will hv to access it directly frm ur client
chk this
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/604e2b64-e689-2910-64b3-ffd650f83756
rgds
arun

JMS adapter and Websphere MQ availability issue

Hi,
My customer uses XI 3.0 and JMS adapter to communicate with WS MQ.
They have several MQ Server instances in separate physical machines, for availability purpose.
the intention is, in case of MQ Server failover, the secondary MQ Server try to connect with the XI-JMS adapter.
The question is:
Is this mechanism possible in an automatic way or is it needed some manual process or configuration of JMS adapter?. Also, is there any alternative more recommendable from the SAP XI adapter point of view?
Thanks in advance,

Thanks Bhavesh and Satya,
Very helpful your answers.
I have another question related with XI and JMS adapter. The scenario is several MQ nodes in separate physical machines sending and receiving messages to/from the same XI-JMS adapter (centralized).
Is this supported by XI-JMS adapter confguration? If not, does anybody knows an alternative way to implement it?
Thanks again in advance,

Sending Msg From HTTP client to XI through JMS Adapter using WebSphereMQ

Hello
I am trying to send some msg from Http client
I configured JMS adapter as receiver
Transport Protocol :WEBsphereMQ JMS provider
Message protocol :JMS1.x
I have given the Ip address of my machine where I installed WEB Sphere MQ
Server Port :1416
Transport Protocol :WebSphere MQ
JMS compliant: JMS-compliant
In SXMB_MONI
Http client sends message without any error.
But while tracing I got message
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
Can anybody tell me the solution..
Thnaks

Hi,
I have not directly faced this but i may suggest ,
1. What do you see in sxmb_moni, do you have a queue problem?
2. see this File-to-File Scenario Stopped Working the reply from Shravan and the last message.
The XBTO que was the problem. I deleted all LUWs in it and now new transactions are working again
3. You may also use this /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Regards,
Anirban.

Configuring JMS adapter for a BPEL process which puts a msg in a Q of MQ

Hi,
I am trying to develop a BPEL process which picks up a message from a Q in Websphere MQ and puts that message in another Q of MQ after processing that.
I have updated the oc4j-ra.xml with the following inputs:
<connector-factory location="eis/MQSeries/Queue" connector-name="Jms Adapter">
 <config-property name="connectionFactoryLocation" value="com.ibm.mq.jms.MQQueueConnectionFactory"/>
 <config-property name="factoryProperties" value="QueueManager=TestManager;TransportType=1;Hostname=machine's ip address;Port=1414;Channel=channel name for connecting to client"/>
 <config-property name="acknowledgeMode" value="AUTO_ACKNOWLEDGE"/>
 <config-property name="isTopic" value="false"/>
 <config-property name="isTransacted" value="true"/>
 <config-property name="username" value="admin"/>
 <config-property name="password" value="welcome"/>
 </connector-factory>
But while testing the BPEL process, I get the error:
<remoteFault>
<part name="code" >
<code>null</code>
</part>
<part name="summary" >
<summary>file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - WSIF JCA Execute of operation 'Produce_Message' failed due to: Adapter Framework unable to create outbound JCA connection. file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12141 ERRJMS_CONN_FAC_NOT_FOUND. Unable to instantiate connection factory. JMS adapter was unable to look up the connection factor com.ibm.mq.jms.MQQueueConnectionFactory neither through JNDI nor instantiate it as a Java class Please examine the log file to determine the problem. ; nested exception is: ORABPEL-12511 Adapter Framework unable to create outbound JCA connection. file:/D:/OraBPELPM_2/integration/orabpel/domains/default/tmp/.bpel_MQMessaging_1.0.jar/Outbound.wsdl [ Produce_Message_ptt::Produce_Message(SourceEmployee) ] - : The Adapter Framework was unable to establish an outbound JCA connection due to the following issue: ORABPEL-12141 ERRJMS_CONN_FAC_NOT_FOUND. Unable to instantiate connection factory. JMS adapter was unable to look up the connection factor com.ibm.mq.jms.MQQueueConnectionFactory neither through JNDI nor instantiate it as a Java class Please examine the log file to determine the problem. Please examine the log file for any reasons. Enable DEBUG logging in the BPEL Console. </summary>
</part>
<part name="detail" >
<detail>null</detail>
</part>
</remoteFault>
Can anyone tell me what has gone wrong in setting the connection factory for the Q or what else I have to configure to sort out this problem?
Thanks,
Jayatu

I am experiencing the exact same issue while configuring for Tibco EMS!!!
I have also checked the oc4j-xa.xml file etc and I am also unable to find any guidance on the steps required from XML config files through to adapter wizard entries!

Problem with JMS Adapter after upgrade to 7.1

Hi All,
After an upgrade the JMS adapter connecting IBM Websphere MQ gives the following error:
Error connecting due to missing class: com.ibm.mq.jms.MQQueueConnectionFactory. Ensure that all resources required are present in the JMS provider library: aii_af_jmsproviderlib.sda
Since we are now on PI 7.1, the directory the JMS adapter should be looking for the libraries should be com.sap.aii.adapter.lib.sda. Has anyone else come across this problem after an upgrade? Should we remove the old aii_af_jmsproviderlib.sda?
Edited by: Luqman on Oct 31, 2008 5:39 PM

does following JAR files in place in aii_af_jmsproviderlib.sda.
●      com.ibm.mq.jar
●      com.ibm.mqbind.jar
●      com.ibm.mqjms.jar
●      connector.jar (use the JAR file from the J2EE client directory)
can u check n confirm.
i hopw u have followed the proper deployement process.
chirag

Error in reciever JMS adapter (SENARIO FILE - XI- JMS )

HI everyone,
My previous error is solved (Error in getting initialcontext). I have deployed the required jar files on server.
Thanks to you'll.
Now I am getting the following error in JMS adapter monitoring RECIEVER CHANNEL . NO DETAIL INFORMTION SET.
i AM USING IBM websphere MQ series for recieving JMS messages from XI.
I have made Queue manager,
Queue,
reciever channel.
and have also provided the following details in my communication channel in XI
QueueConnection FactoryJavaClass : com.ibm.mq.jms.MQQueueConnectionFactory
QueueJavaClass : com.ibm.mq.jms.MQQueue
Ip address or server name : <my ip address> since i have installed IBM JMS server on my system.
server port :1415
QueueManagerName :QM_apple
channel name : reciever_channel
jms Queue: Q1
character set id (ccsid): This I have not given , Idont know what to give here
Transport protocol :tcp/ip
Please guide me to go further , I am stucked at the error , No reciever details set. What should i do?

Hi Deepak ,
Please refer this forum post .. if this helps.
Reg:Receiver Mail Adapter
Regards,
srinivas

WebSphere MQ JMS adapter

Similar Messages

Maybe you are looking for