Configuration of JMS adapter Using WebSphereMQ
Hi All
I am trying Http to JMS scenario.
I configured my JMS adapter as receiver
Trasport protocol: Web sphereMQ JMS provider.
Queue Connection Factory : com.ibm.mq.jms.MQQueueConnectionFactory
Queue Java class : com.ibm.mq.jms.MQQueue
IP address : 172.17.50.150Where I installed Web Sphere MQ
In SXMB_MONI my http client sends msg without any error
But In runtime work bench whn I observe Adapter monitoring I got error as
Receiver channel. Details: MQJMS2005: failed to create MQQueueManager for '172.17.50.150:QM_APPEL'
PLZ ell me d coz
Thanks
Hi,
for the configuration of a Websphere MQ JMS adapter, you will have to also give details like, Queue Manager Name, channel name, etc.
Just check this link for the same,
http://help.sap.com/saphelp_nw04/helpdata/en/c1/739c4186c2a409e10000000a155106/content.htm
Provide all the correect details and it will hopefully work.
Regards,
Bhavesh
Similar Messages
-
Sending Msg From HTTP client to XI through JMS Adapter using WebSphereMQ
Hello
I am trying to send some msg from Http client
I configured JMS adapter as receiver
Transport Protocol :WEBsphereMQ JMS provider
Message protocol :JMS1.x
I have given the Ip address of my machine where I installed WEB Sphere MQ
Server Port :1416
Transport Protocol :WebSphere MQ
JMS compliant: JMS-compliant
In SXMB_MONI
Http client sends message without any error.
But while tracing I got message
<Trace level="1" type="T">Async barrier reached. Bye-bye !</Trace>
Can anybody tell me the solution..
ThnaksHi,
I have not directly faced this but i may suggest ,
1. What do you see in sxmb_moni, do you have a queue problem?
2. see this File-to-File Scenario Stopped Working the reply from Shravan and the last message.
<i>The XBTO que was the problem. I deleted all LUWs in it and now new transactions are working again</i>
3. You may also use this /people/sap.user72/blog/2005/11/29/xi-how-to-re-process-failed-xi-messages-automatically
Regards,
Anirban. -
How to configure an jms adapter to use ActiveMQ?
Does anyone have an example of how to configure an jms adapter of oracle esb
for third party JMS provider to use ActiveMQ?
I had done something as follow:
1、add activemq shared-library in $SOA_INSTANCE/config/service.xml
2、config a jms adapter fro third party use paramter:
java.naming.factory.initial org.apache.activemq.jndi.ActiveMQInitialContextFactory
java.naming.provider.url tcp://10.20.30.26:61615
but I got a error:ERRJMS_CONN_FAC_NOT_FOUND.
Caused by: javax.naming.NameNotFoundException: org.apache.activemq.ActiveMQConnectionFactory
at org.apache.activemq.jndi.ReadOnlyContext.lookup(ReadOnlyContext.java:225)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at oracle.tip.adapter.jms.JMS.JMSFactory.jndiLookup(JMSFactory.java:237)
at oracle.tip.adapter.jms.JMS.JMSConnectionFactoryFactory.getConnectionFactory(JMSConnectionFactoryFactory.java:138)
... 51 more
what should I do? can someone give me a detail resolvent?I also had done as follows:
1、add activemq shared-library to shared-library named "oracle.esb" in server.xml :
<shared-library name="oracle.esb" version="10.1.3">
<import-shared-library name="apache.activemq"/>
</shared-library>
2、add in $SOA_INSTANCE\j2ee\soa\application-deployments\default\JmsAdapter\oc4j-ra.xml
<imported-shared-libraries>
<import-shared-library name="apache.activemq"/>
</imported-shared-libraries> -
PI 7.11 JMS adapter using JNDI weblogic server issue
Hi SAP experts,
I have a scenario to integrate to a application using JMS adapters. we use SAP PI 7.11 version.
We have deployed JMS drivers successfully and We face issue here to connect to weblogic server
We are using JMS adapter using JNDI to connect to weblogic server version 10.3.
Can anyone help with the exact format to be used in JMS properties table and additional parameters table in JMS communication channel. Your quick help will be appreciated.
A channel error occurred. The detailed error (if any) : com.sap.aii.adapter.jms.api.connector.ConnectorException: Error looking up destination: AccrualDetailsQueue for profile: ConnectionProfile of channel: CC_SND_JMS on node: 3010950 having object id: 673696a9fe8c39fdab32213f0930afb3: javax.naming.NameNotFoundException: Unable to resolve 'AccrualDetailsQueue'. Resolved ''<br> at com.sap.aii.adapter.jms.core.connector.JndiConnectorImpl.createDestination(JndiConnectorImpl.java:168)<brHi Padmini,
Refer to the following link:
http://help.sap.com/saphelp_nw04/helpdata/en/24/4cad3baabd4737bab64d0201bc0c6c/content.htm
It was very helpful to me, for configuring the additional parameters in the communication Channel JMS.
I leave you some screenshots of the settings that I did.
I seize the opportunity to ask you, where do I can get the drivers (.Jar) for Weblogic?
Regards.
Rodrigo. -
Configuration for JMS Adapter Sensor action and JMS Queue sensor action..!!
Hi,
Id like my BPEL process to send an XML message to JMS on Websphere,I was able to do this through a JMS adapter.But I would more like to add sensors into my process which would really do the same thing - send an XML message to JMS Q.
Now I understand that there are two ways to do this,JMS Queue and JMS Adapter - thorugh bpel sensor action.
I am able to use JMS Queue and it works fine , but adds its own xml tags to the message,Is there any way I could send only my xml payload as a message to the queue??
Also could any1 tell me what is the configuration for JMS Adapter sensor action?
Any suggestions how do I go about it??Hey Anirudh,
Thanx for the response :-)
All these hold good when I have an AQ adaptor right,But the thing is I want to send a message to a 'JMS' queue with out actually using an adapter configuration wizard and everythng..So I resolved to JMS queue Sensor action..Heres the xml snippet from the sensorAction.xml files which is generated..
<actions targetNamespace="http://xmlns.oracle.com/Test_JMS_Logging" xmlns="http://xmlns.oracle.com/bpel/sensor" xmlns:tns="http://xmlns.oracle.com/Test_JMS_Logging" xmlns:pc="http://xmlns.oracle.com/bpel/sensor">
<action name="JMS_LogEntry" publishName="" publishType="JMSQueue" enabled="true" filter="" publishTarget="jms/L_Queue">
<property name="JMSConnectionFactory">jms/L_QueueCF</property>
<sensorName>ActivitySensor_JMS</sensorName>
</action>
</actions>
This works grt and adds messages to the queue..But adds its own header info according to the sensor.xsd loacted at the Oracle_home\bpel\system\xmllib\ folder.
Right now the XML message added to the Queue is:-
<actionData xmlns="http://xmlns.oracle.com/bpel/sensor">
<header>
<sensor sensorName="ActivitySensor_JMS" classname="oracle.tip.pc.services.reports.dca.agents.BpelActivitySensorAgent" kind="activity" target="AddLEntr
y" xmlns:pc="http://xmlns.oracle.com/bpel/sensor" xmlns:ns2="http://www.ulrhome.com/2008/10/L_Entry" xmlns:tns="http://xmlns.oracle.com/Test_JMS">
<activityConfig evalTime="completion">
<variable outputDataType="string" outputNamespace="http://www.w3.org/2001/XMLSchema" target="$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName"/>
</activityConfig>
</sensor>
<instanceId>950016</instanceId>
<processName>Test_JMS</processName>
<processRevision>v2009_04_15__40833</processRevision>
<domain>default</domain>
<timestamp>2009-04-15T11:21:23.596-04:00</timestamp>
<midTierInstance>app01.ulrhome.com:9700</midTierInstance>
</header>
<payload>
<activityData>
<activityType>scope</activityType>
<evalPoint>completion</evalPoint>
<durationInSeconds>0.011</durationInSeconds>
<duration>PT0.011S</duration>
</activityData>
<variableData>
<dataType>12</dataType>
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
<queryName/>
<target>$WriteL_Produce_Message_InputVariable/L_Entry/ns2:L_Entry/ns2:LCName</target>
<updaterName>AddL_Entry</updaterName>
<updaterType>scope</updaterType>
</variableData>
</payload>
</actionData>
My requirement is that I need to add a sensor to the BPEL process which posts 'Only my payload message to the JMS queue'..
What I would want the message in the Queue to be is : -
<data>
<ns0:LCName xmlns:ns0="LC_Test1http://www.ulrhome.com/2008/10/L_Entry">LC_Test1</ns0:LCName>
</data>
Also while creating a Sensor action I get another option as JMS Adaptor,I am not sure of what value to type in this wizard..Heres what I keyed in..M sure this is not right..Cos it dosnt work :-)
<action name="SensorAction_JMS" publishName="" publishType="JMSAdapter" enabled="true" filter="" publishTarget="jms/LoggingQueue">
<property name="JMSConnectionName">Log</property>
</action>
</actions>
Could any 1 tel me what values are the right values..And does JMS Adapter mean that I have to create a JMS Apator in the project and give that connection name as a Value..
I am not finding sufficiant Documentation for 'JMS Adapter' so M clueless and right now any help will be appriciated :-)
Regards,
Akshatha. -
Configuration of JMS Adapter in Central Adapter Engine
Hi all,
I have configured Sender JMS Adapter in Central Adapter Engine with the following parameters:
Adapter type : JMS
Transport Protocol : WebSphere MQ (non-jms)
Message Protocol : JMS1.x
Adapter Engine : Integration Server
Queue Connection Factory java class :Com.ibm.mq.jms.MQQueueConnectionFactory
Queue java class : com.ibm.mq.jms.MQQueue
ipadd : localhost
port : 1414
Queue Manager name : TEST.QMGR
Channel Name : CH1
JMS Queue : LQ
CCSID : 437
Protocol : TCP/IP
JMS-compliant : WebSphere MQ(non-jms)
JMS Queue user : MUSR_MQADMIN
Mapping of message : Entire Message = JMS Payload
But the status is red with an error message Sender Details : NULL
Could you please tell me what went wrong?
Regards
SathyaHi,
Make sure that Websphere MQ server is running.
If u r comfortable with java, you can even write a Java code to acces the server and check if the JMS server is working fine. Some times there will be sample applications provided by Websphere MQ itself.
Once the java program works then it will be easy to debug the error over here.
Regards,
P.Venkat -
How to configure the jms adapter
hi all,
i got some trouble trying to configure de JMS adapter, i 'd be glad if some colud give me a hand with this. i'am wordering if there is a complete document about this topic to help me out with de configuration.
thk u all very much.
Regards, PabloHi,
The below URL will help you to understand what is JMS, how to configure and do a testing.
http://learn-oraclesoa.blogspot.co.uk/2013/04/oracle-jms-adapter-tutorial.html
Below will help you to configure the JNDI for JMS
http://manojm-nair.blogspot.co.uk/2013/02/configuring-connection-jndis-for-jms_13.html
Thanks,
Vijay -
Configuration of JMS receiver Using Jboss JMS provider
Hi all..
I am configuring JMS adapter as receiver.
I am using JMS provider JBOSS .
I hav done configuration as
Transport protocol :Acess JMS provider with JNDI
JNDI lookUp Name of q connection factory: org.jboss.naming.LinkRefPairService
Name of JNDI initial Context factory :org.jnp.interfaces.NamingContextFactory
in sxmb_moni I am getting blak&white flag
IN Run time work bench In adapter monitoring I am getting
Receiver channel. Details: Cannot instantiate class: org.jnp.interfaces.NamingContextFactory.
Can anybody plz tell me why this haapend?Did you deploy the JMS client jars to the J2EE Engine?
Cannot instantiate class: org.jnp.interfaces.NamingContextFactory sounds like the Framework can't find the class.
Take a look here:
Re: Using JBOSS JMS provider with XI
Greetz
Sebastian
Message was edited by: Sebastian Simon -
QoS EOIO - How to Configure in JMS adapter?
Hi there,
In order to configure the JMS sender-adapter with EOIO QoS, I need to provide 2 "extra" parameters. These are
1)Queue ID
2)Processing J2EE Cluster Server (ClusterID)
So far I was able to find out the name of the ClusterId in our system but for the Queue ID I still have some doubts.
From the XI documentation I understand that for QoS EOIO , all messages share the same queue. They also say; <i>The "suffix" of this queue must be explicitly set in the application program by a <u>serialization context</u> before the client proxy is called.</i> What exactly is <i>serialization-context</i> in this context?
Can someone provide me with a clear explanation which steps I need to follow in order to use the functionality of QoS EOIO? And if possible some example of the name of an EOIO queue?
Thanks,
R.Hi Roberto,
For queue ID, you can specify any arbitrary queue ID for example, POQueue1, jayqueue or salesorder...
It can be anything you want and no additional configuration is needed. Just specify any name you like to use for queue ID and you are all set.
Thanks,
Jay -
Store and Forward agent configuration in jms adapter - jdeveloper
I am created the store and forward (SAF) agent in weblogic to communicate with another weblogic server.
after creating it i tried to configure it in jms adapter wizard but i can't able see my SAF Queue there.
so now how can i give payload to my SAF queue for testing it.
Please provide any suggestions, i will provide with the points.
Thanks,
Ajay AthuluriSo I don't know much of the details of AIA, and next to nothing of the pre-built integrations, so can't help you much there. However are you sure you've got all the requisite SAF configuration right? The JMS and SAF component hierarchies are a real rats' nest of trouble. This is a setup I've found to work:
* SAF Agent, targeted to a managed server; needs to use the default filestore (ie when configuring it you don't specify one)
* JMS Module containing:
* SAF Remote Context, pointing at your remote WLS instance
* JMS SubDeployment, targeted to the SAF Agent
* Connection Factory, targeted at the managed server
* SAF Imported Destination, targeted at the SubDeployment
* Queue in the Imported Destination, with WLS and JNDI names set up so they're different in the sending domain and receiving domain
The pre-built integrations will (probably) have the JNDI names you need to configure in the documentation.
HTH!
Paddy -
Problem Encountered in JMS adapter using SEEBURGER module
While testing the receiver JMS adapter for XML to EDI conversion using Seeburger module, I am facing errors.
<b>1. The error encountered is</b> :
Error while processing message '4720bc32-2dfc-03d8-0000-00000a2050d3'; detailed error description: java.lang.NullPointerException at com.sap.aii.adapter.jms.core.connector.SendContextImpl.send(SendContextImpl.java:43) ...
<u>SEEBURGER BICXIADAPTER</u> --- Conversion of synchronous request from module chain ended with errors ---Error: [Error:ID=2061;LEVEL=1] XMLDocReader moveNext(): Cannot move to next trigger : Error in line 1: <u>XML file should begin with white spaces or <. (Found char :U(Hex :85</u>). DESCRIPTION: XMLDocReader Exception: Not able to move to next trigger [not specified] - trigger may not right set.
<b>2. The targer PAYMUL xml is as follows</b> :
( At receiver channel, the above should be converted to EDI-Paymul using the Seeburger Module)
<u>PAYMUL XML</u>
<?xml version="1.0" encoding="UTF-8" ?>
- <LIST>
- <S_UNA>
<D_DELIMITER>:+.? '</D_DELIMITER>
</S_UNA>
- <S_UNB>
- <C_S001>
<D_0001>UNOA</D_0001>
<D_0002>2</D_0002>
</C_S001>
- <C_S002>
<D_0004>SAPDM</D_0004>
<D_0007>ZZ</D_0007>
</C_S002>
- <C_S003>
<D_0010>000000000000</D_0010>
<D_0007>55</D_0007>
</C_S003>
- <C_S004>
<D_0017>070201</D_0017>
<D_0019>1150</D_0019>
</C_S004>
<D_0020>01945678912345</D_0020>
- <S_UNH>
<D_0062>1</D_0062>
- <C_S009>
<D_0065>PAYMUL</D_0065>
<D_0052>D</D_0052>
<D_0054>96A</D_0054>
<D_0051>UN</D_0051>
<D_0057>FUN01G</D_0057>
</C_S009>
- <S_BGM>
- <C_C002>
<D_1001>452</D_1001>
</C_C002>
<D_1004>01945678912345</D_1004>
<D_1225>9</D_1225>
</S_BGM>
- <S_DTM>
- <C_C507>
<D_2005>137</D_2005>
<D_2380>20070201</D_2380>
<D_2379>102</D_2379>
</C_C507>
</S_DTM>
- <G_SSG4>
- <S_LIN>
<D_1082>1</D_1082>
- <S_DTM>
- <C_C507>
<D_2005>203</D_2005>
<D_2380>20070201</D_2380>
<D_2379>102</D_2379>
</C_C507>
</S_DTM>
- <S_RFF>
- <C_C506>
<D_1153>ACK</D_1153>
<D_1154>01945678912345</D_1154>
</C_C506>
</S_RFF>
- <S_RFF>
- <C_C506>
<D_1153>AEK</D_1153>
<D_1154>01945678912345</D_1154>
</C_C506>
</S_RFF>
- <S_BUS>
<D_3279>IR</D_3279>
- <C_C551>
<D_4383>UGI</D_4383>
</C_C551>
</S_BUS>
- <G_SSG5>
- <S_MOA>
- <C_C516>
<D_5025>9</D_5025>
<D_5004>5000</D_5004>
<D_6345>EUR</D_6345>
</C_C516>
</S_MOA>
</G_SSG5>
- <G_SSG6>
- <S_FII>
<D_3035>OR</D_3035>
- <C_C078>
<D_3194>ES921998500000000012</D_3194>
<D_6345>EUR</D_6345>
</C_C078>
- <C_C088>
<D_3433>ABNAES17000</D_3433>
<D_1131>25</D_1131>
<D_3055>5</D_3055>
</C_C088>
<D_3207>ES</D_3207>
</S_FII>
</G_SSG6>
- <G_SSG7>
- <S_NAD>
<D_3035>OY</D_3035>
- <C_C080>
<D_3036>XYZ CORPORATION LTD</D_3036>
</C_C080>
- <C_C059>
<D_3042>XX</D_3042>
</C_C059>
<D_3164>XX</D_3164>
<D_3207>ES</D_3207>
</S_NAD>
</G_SSG7>
- <G_SSG11>
- <S_SEQ>
- <C_C286>
<D_1050>1</D_1050>
</C_C286>
- <S_MOA>
- <C_C516>
<D_5025>9</D_5025>
<D_5004>5000</D_5004>
<D_6345>EUR</D_6345>
</C_C516>
</S_MOA>
- <S_DTM>
- <C_C507>
<D_2005>227</D_2005>
<D_2380>2007-02-01</D_2380>
<D_2379>102</D_2379>
</C_C507>
</S_DTM>
- <S_RFF>
- <C_C506>
<D_1153>AIK</D_1153>
<D_1154>01901234567890</D_1154>
</C_C506>
</S_RFF>
- <S_RFF>
- <C_C506>
<D_1153>CR</D_1153>
<D_1154>01901234567890</D_1154>
</C_C506>
</S_RFF>
- <S_FCA>
<D_4471>13</D_4471>
</S_FCA>
- <G_SSG12>
- <S_FII>
<D_3035>BF</D_3035>
- <C_C078>
<D_3194>AT921998500000000011</D_3194>
<D_6345>EUR</D_6345>
</C_C078>
- <C_C088>
<D_3433>ABNAAT14000</D_3433>
<D_1131>25</D_1131>
<D_3055>5</D_3055>
</C_C088>
<D_3207>ES</D_3207>
</S_FII>
</G_SSG12>
- <G_SSG13>
- <S_NAD>
<D_3035>BE</D_3035>
- <C_C080>
<D_3036>ABC CORPORATION 1</D_3036>
</C_C080>
- <C_C059>
<D_3042>XX</D_3042>
</C_C059>
<D_3164>XX</D_3164>
<D_3207>ES</D_3207>
</S_NAD>
</G_SSG13>
- <G_SSG16>
- <S_PRC>
- <C_C242>
<D_7187>11</D_7187>
</C_C242>
- <S_FTX>
<D_4451>PMD</D_4451>
- <C_C108>
<D_4440>SENDERPN1</D_4440>
</C_C108>
</S_FTX>
</S_PRC>
</G_SSG16>
</S_SEQ>
</G_SSG11>
</S_LIN>
</G_SSG4>
- <S_CNT>
- <C_C270>
<D_6069>2</D_6069>
<D_6066>1</D_6066>
</C_C270>
</S_CNT>
- <S_UNT>
<D_0074>1</D_0074>
<D_0062>1</D_0062>
</S_UNT>
</S_UNH>
- <S_UNZ>
<D_0036>1</D_0036>
<D_0020>01945678912345</D_0020>
</S_UNZ>
</S_UNB>
</LIST>
<b>3. The module parameters for Seeburger inputs :</b>
( In receiver communication channel)
<b>Processing Sequence</b>
localejbs/CallBicXIRaBean Local Ent Bean x2e_bic_paymul
SAP XI JMS Adapter/ConvertMessageToBinary Local Ent Bean convert_XI2Bin
SAP XI JMS Adapter/SendBinarytoXIJMSService Local Ent Bean
exit
<b>Module Key</b>
x2e_bic_paymul destSourceMsg MainDocument
x2e_bic_paymul destTargetMsg MainDocument
x2e_bic_paymul logAttID ConverterLog
x2e_bic_paymul mappingName See_X2E_PAYMUL_UN_D96A
x2e_bic_paymul newLine true
x2e_bic_paymul saveSourceMsg XMLEDIHi,
Check Below links,
/people/bla.suranyi/blog/2006/06/08/sap-xi-supports-edifact
http://www.seeburger.it/fileadmin/it/pdf/2005_04_sapphire_Ferrero_transcript.pdf
http://www.seeburger.com/fileadmin/com/pdf/Butler_Group_SEEBURGER_Technology_Audit.pdf
http://www.seeburger.com/fileadmin/com/pdf/AS2_General_Overview.pdf
SAP Adapters
Regards,
Phani -
Regarding Module Configuration of JMS Adapter
Hi,
Now i am working on IDoc to JMS interface, I am facing complexity in creating the structure in Module tab of Receiver JMS Adapter. Because the target system is expecting fixed length file so i should use the Local EJBs available in Module tab of Receiver JMS adapter and i need to pass the fieldFixedLegth parameters for all the nodes coming from DELVRY01 Idoc. I think creating structure for all the nodes in receiver jms adapter is so complex, If you are having any other alternatives, please share with me.
The below is the IDoc xml which is coming from source side.
<?xml version="1.0" encoding="UTF-8" ?>
<DELVRY01>
<IDOC BEGIN="1">
<EDI_DC40 SEGMENT="1">
<TABNAM>EDI_DC40</TABNAM>
<MANDT>100</MANDT>
<DOCNUM>000000000999999</DOCNUM>
<DOCREL>1145</DOCREL>
<STATUS>1</STATUS>
<DIRECT>1</DIRECT>
<OUTMOD>2</OUTMOD>
<IDOCTYP>DELVRY01</IDOCTYP>
<MESTYP>abcde</MESTYP>
<SNDPOR>efghi</SNDPOR>
<SNDPRT>LS</SNDPRT>
<SNDPRN>LMNOP100</SNDPRN>
<RCVPOR>A000000023</RCVPOR>
<RCVPRT>LS</RCVPRT>
<RCVPRN>TB</RCVPRN>
<CREDAT>20056556</CREDAT>
<CRETIM>183734</CRETIM>
<SERIAL>12345678</SERIAL>
</EDI_DC40>
<E1EDL20 SEGMENT="1">
<VBELN>006456451</VBELN>
<VSTEL>4656</VSTEL>
<VKORG>1665</VKORG>
<ABLAD>ABCDEDFJSDFDF</ABLAD>
<ROUTE>DFSDF</ROUTE>
<VSBED>08</VSBED>
<BTGEW>3.000</BTGEW>
<NTGEW>333.000</NTGEW>
<GEWEI>NNN</GEWEI>
<VOLUM>450.190</VOLUM>
<VOLEH>DMBG55TERTQ</VOLEH>
<ANZPK>00000</ANZPK>
<XABLN>0001995346331</XABLN>
<LIFEX>N</LIFEX>
<E1EDL22 SEGMENT="1">
<VSTEL_BEZ>ABCDEFGHIIJFLD</VSTEL_BEZ>
<VKORG_BEZ>SDFKJSDFSDF</VKORG_BEZ>
<ROUTE_BEZ>FSDNFKSDJFKJASDKFJSDJFL</ROUTE_BEZ>
<VSBED_BEZ>FNSDKFSD,F,MSDF,</VSBED_BEZ>
</E1EDL22>
<E1EDL21 SEGMENT="1">
<KDGRP>10545</KDGRP>
<BEROT>teGHGHst FGHHFGHXI </BEROT>
<TRAGR>0001</TRAGR>
<E1EDL23 SEGMENT="1">
<LFART_BEZ>Outbound delivery</LFART_BEZ>
<KDGRP_BEZ>LPHG Wholesale</KDGRP_BEZ>
<TRAGR_BEZ>On HHFH</TRAGR_BEZ>
</E1EDL23>
</E1EDL21>
<E1EDL18 SEGMENT="1">
<QUALF>ORI</QUALF>
</E1EDL18>
<E1ADRM1 SEGMENT="1">
<PARTNER_Q>AG</PARTNER_Q>
<PARTNER_ID>00000GHF12889</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<FORMOFADDR>Makro SA</FORMOFADDR>
<TELEPHONE1>041 3600TERTE605-C...</TELEPHONE1>
<TELEFAX>041 36006TRT47</TELEFAX>
<COUNTRY1>ZHFGHA</COUNTRY1>
<REGION>EHGHC</REGION>
<E1ADRE1 SEGMENT="1">
<EXTEND_Q>100</EXTEND_Q>
<EXTEND_D>6HG15FGHFG05006416</EXTEND_D>
</E1ADRE1>
</E1ADRM1>
<E1ADRM1 SEGMENT="1">
<PARTNER_Q>WE</PARTNER_Q>
<PARTNER_ID>00000178E87T</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<FORMOFADDR>Makro SA</FORMOFADDR>
<NAME1>Makro Port Elizabeth Br 14</NAME1>
<NAME3>t/a Makro SA</NAME3>
<STREET1>CDFJSDLFJLS d</STREET1>
<COUNTRY1>ZFSDFA</COUNTRY1>
<REGION>EFSDFC</REGION>
<E1ADRE1 SEGMENT="1">
<EXTEND_Q>100</EXTEND_Q>
<EXTEND_D>6001534453505006416</EXTEND_D>
</E1ADRE1>
</E1ADRM1>
<E1ADRM1 SEGMENT="1">
<PARTNER_Q>54OSP</PARTNER_Q>
<PARTNER_ID>404534501</PARTNER_ID>
<LANGUAGE>EN</LANGUAGE>
<COUNTRY1>Z5454A</COUNTRY1>
</E1ADRM1>
<E1ADRM1 SEGMENT="1">
<PARTNER_Q>OSO</PARTNER_Q>
<PARTNER_ID>1054400</PARTNER_ID>
<COUNTRY1>Z5453A</COUNTRY1>
</E1ADRM1>
<E1EDT13 SEGMENT="1">
<QUALF>006</QUALF>
<NTANF>2005455470706</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>2005453470706</NTEND>
<NTENZ>00053454000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00005340000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDT13 SEGMENT="1">
<QUALF>003</QUALF>
<NTANF>20070706</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>200705345706</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000053455400</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDT13 SEGMENT="1">
<QUALF>001</QUALF>
<NTANF>20070706</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070706</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDT13 SEGMENT="1">
<QUALF>007</QUALF>
<NTANF>20070709</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20070709</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDT13 SEGMENT="1">
<QUALF>010</QUALF>
<NTANF>20070705</NTANF>
<NTANZ>000000</NTANZ>
<NTEND>20705</NTEND>
<NTENZ>000000</NTENZ>
<ISDD>00000000</ISDD>
<ISDZ>000000</ISDZ>
<IEDD>00000000</IEDD>
<IEDZ>000000</IEDZ>
</E1EDT13>
<E1EDL28 SEGMENT="1">
<ROUTE>ED545S1</ROUTE>
<DISTZ>0.000</DISTZ>
<E1EDL29 SEGMENT="1">
<ROUTE_BEZ>FKLSDJFLSJDFJSDFJLSDJFLKSD</ROUTE_BEZ>
</E1EDL29>
</E1EDL28>
<E1EDL24 SEGMENT="1">
<POSNR>000010</POSNR>
<MATNR>000000000000</MATNR>
<MATWA>000000000</MATWA>
<ARKTX>OmFDFS 2kg.</ARKTX>
<MATKL>FSD5345FSDFLAUND</MATKL>
<WERKS>10FDF40</WERKS>
<LGORT>01</LGORT>
<LFIMG>10545.000</LFIMG>
<VRKME>C54T</VRKME>
<LGMNG>10553545.000</LGMNG>
<MEINS>CT534555345545345</MEINS>
<NTGEW>1653454.000</NTGEW>
<BRGEW>181.000</BRGEW>
<GEWEI>KGM</GEWEI>
<VOLUM>450.190</VOLUM>
<VOLEH>DMQ</VOLEH>
<LADGR>0534543002</LADGR>
<TRAGR>0001</TRAGR>
<VKBUR>UF53401</VKBUR>
<VKGRP>160</VKGRP>
<VTWEG>00</VTWEG>
<SPART>00</SPART>
<GRKOR>000</GRKOR>
<EAN11>16001085031034</EAN11>
<POSEX>000000</POSEX>
<E1EDL25 SEGMENT="1">
<LGORT_BEZ>Main s53453453454tore</LGORT_BEZ>
<LADGR_BEZ>Forklift</LADGR_BEZ>
<TRAGR_BEZ>On pallets</TRAGR_BEZ>
<VKBUR_BEZ>Gener534534al Trade</VKBUR_BEZ>
<VKGRP_BEZ>RSM E534 Cape</VKGRP_BEZ>
<VTWEG_BEZ>FKLSDFKLS</VTWEG_BEZ>
<SPART_BEZ>FSDFSDFJoducts</SPART_BEZ>
</E1EDL25>
<E1EDL26 SEGMENT="1">
<PSTYV>TAN</PSTYV>
<MATKL>FGUND</MATKL>
<PRODH>0125VH</PRODH>
<UMVKZ>1</UMVKZ>
<UMVKN>1</UMVKN>
<KZTLF>B</KZTLF>
<UEBTO>0.0</UEBTO>
<UNTTO>0.0</UNTTO>
<KVGR1>Z4FDFSDFSD</KVGR1>
<KVGR2>TPS</KVGR2>
<E1EDL27 SEGMENT="1">
<PSTYV_BEZ>Standard Item</PSTYV_BEZ>
<PRODH_BEZ>OmoFFD Regular 8X2kg.</PRODH_BEZ>
<WERKS_BEZ>ConFSDFgella DC</WERKS_BEZ>
<KVGR1_BEZ>PE Cust Del</KVGR1_BEZ>
<KVGR2_BEZ>rd party sales</KVGR2_BEZ>
</E1EDL27>
</E1EDL26>
<E1EDL43 SEGMENT="1">
<QUALF>C</QUALF>
<BELNR>FDF</BELNR>
<POSNR>000010</POSNR>
<DATUM>FFSDF</DATUM>
</E1EDL43>
<E1EDL41 SEGMENT="1">
<QUALI>54</QUALI>
<BSTNR>test I Link</BSTNR>
<BSTDT>00000000</BSTDT>
<POSEX>000010</POSEX>
</E1EDL41>
</E1EDL24>
</E1EDL20>
</IDOC>
</DELVRY01>not related
-
Configuring file sender adapter using share
Hello! I need to read file from shared directory with user name and password. How can I configure user name and password verification?
Hi,
If you are accessing the file in the same server(shared directory) then there is no need of user name password.NFS protocol used for accessing the file in the local server path.i thing shared directory is created in XI server for accessing you from your local PC.If then that authentication for accessing you from your local PC to XI system.Not for XI-file adapter.
If you are accessing the file from different server then you should use FTP protocol.That time only user name and password require.
Regards,
Prakasu.M -
How to set values in JMS Adapter using Adanced specific Message Attributes
Hi Frnds,
in my scenarios i have to add extra header information MQ Message,
using Adanced specific Message Attributes i defined 7 parameters(Transaction,Environment,shema......) all are type Interger.But i have to set values ( Transaction type,Enviroment,shema....).
Where i can set values ??
help me on this...
Regards,
Raja SekharHi Vijay,
Thanks for your replay,as per your input i creted dynamic configuration method,
i taget structure luks like this
<Data>
<Mesage>
<gl_update>
<header>
<ean1>
<ean2>
</header>
<gl_update>
<Message>
i written UDF and mapped to header element gl_update,
but i am getting below error message in MONI
SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">EXCEPTION_DURING_EXECUTE</SAP:Code>
<SAP:P1>com/sap/xi/tf/_MM_ ffjms_</SAP:P1>
<SAP:P2>com.sap.aii.mappingtool.tf7.IllegalInstanceExcepti</SAP:P2>
<SAP:P3>on: Cannot create target element /ns0:MT_jms_ _a</SAP:P3>
<SAP:P4>sync_out/Data/Message/ GLUpdate. Values missi~</SAP:P4>
<SAP:AdditionalText />
<SAP:Stack>Runtime exception occurred during application mapping com/sap/xi/tf/_MM_ ffjms_; com.sap.aii.mappingtool.tf7.IllegalInstanceException: Cannot create target element /ns0:MT_jms_ asyncout/Data/Message/ GLUpdate. Values missi~</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
i want to know i mapped to UDF to GL_Update is is correct, to which element i have to map.
i think there is no prob with UDF,its executing ,giving warning messages
help me on this,
Regaards
Raj -
Async/Sync Bridge in JMS Adapter using modules
Hi All,
can you please help me on this, I have done a JMS to SOAP scenario where I have used two JMS comm channels.
one is for sender JMS system and another is for getting the response message back.
can any one please tell me should I maintain a receiver agreement with the comm channel thru which I am getting the response message back to the JMS system?
and can I maintain the same connection parameters in both of this JMS comm channels?
Thanks
VineetHi,
The same connection parameters can be used across the two Jms channels. And you have to define two receiver agreements, one of Receiver Soap and the other for Receiver Jms.
I am not completely sure whether it works, even with no receiver agreement at Jms receiver side.
Regards,
Swetha.
Maybe you are looking for
-
My MP560 got the dreaded B200 code, meaning get a new printer. Hesitated to buy another Canon, but the MX922 had all the features I was looking for. Easy set up, but first problem was printing from the internet, 922 wanted to use paper in the top tra
-
How to introduce Space between currencyCode and number using convertNumber in adf
Hi, We are trying to use the af:convertNumber tag inside the af:outputText to apply the currency code in front of the number. We would like to introduce a space between currency code and number by using the currency converter. Sample code snippet is
-
HP Pavillion A5T37AV#ABA unable to open program.
My Adobe Illustrator application won't open. It starts to open, then shuts down. I've tried restarted the computer and reinstalling the software with no luck. This doesn't happen with my other Adobe programs.
-
BrowserLab Pricing Announcement
Please head over to the BrowserLab Team Blog to read today's announcements covering pricing, and a hint about a new product we're working on. http://blogs.adobe.com/browserlab/ Bruce Bowman BrowserLab product manager
-
Concatenation of constant charecter as prefix with charecteristics IO value
Hi Experts, I have a infocube with huge data,in which material number is one of the characteristic infoobject namely 'zmatnr' holds values like 123456789. I want to display the material number values in a format like MN123456789 where MN(constant ch