WebStart support for Firefox Browser using Java Linux AMD64

I am trying to setup a Firefox browser to use Java WebStart (jnlp).
I am running Java Linux (AMD64)
but I have no <JAVA_HOME/jre/plugins directory and no libjavaplugin_oji.so file with the Java installation.
1) Can I download libjavaplugin_oji.so plugin somewhere?
2) Will it work in Java Linux (AMD64)?
3) Can Java Linux (AMD64) be setup to operate Java WebStart Technology?
If so, How the h--- do I do it?
Frustrated
Newbean

I have the same problem. Downloaded the 64 bit jre and found no libjavaplugin_oji.so in it.
Then downloaded the 32 bit jre and did the soft link and still no work.
Has anyone made the 32 bit jre work on the 64 bit linux?

Similar Messages

Remote panel plugin support for Firefox browser?

I think I've been through all the relevant material on the NI site, but to no avail. I used to be able to make Remote Panels work with Mozilla by copying the NPLVWin32.dll into the Mozilla plugins directory. This doesn't seem to work with Firefox--at least, not with my Firefox.
I have XP, Firefox 1.0, and LabVIEW 7.1.1, and these tests are all on the machine that has LabVIEW installed, so the run-time engine is not the issue. The symptom is that I get "Click here to download plugin" when trying to load a page with an embedded panel no matter what things I do in the Firefox plugins folder.
Any ideas? I think that Firefox/Mozilla are closing in on 10% market penetration, with much higher rates in Europe, and I'm wondering if others have made this work. This experience has also made me want to know more about how browser plugins work (how the supporting library is selected and located by the browser, how the OBJECT and EMBED tags work, etc.), so good tips on explanatory nuggets are also appreciated.
Thanks,
John

I have no issues using remote panels in Firefox (2.0) I believ 1.5 worked as well.
You only have to make sure you accept the ActiveX component
Ton
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!

How to display Map for viewing in browser using Java

I am fidning a solution for displaying political maps in browser using Java technology.
Is ther anybody with a solution.
Waiting for your respone.
Regards
Mithun

palanithendral wrote:
Hi,
Our application using in English, German, Franch and chinese.You have several different idioms in your application and have not accurately identified where the actual problem is. You have all of the following
-database
-http
-excel
-excel in http
-display on the target computer
The first step with these sorts of problem is to identify where the problem actually occurs.
String chineseCharacter=""; // chineseCharacter like 長长牀床東东彿佛. This chinese data coming from oracle database..A good theory. Now explain how you proved that that is what is coming from the database.
After export the data to excel show the result for é·é¿çåºæ±ä¸å½¿ä½.As another example. Presumably you are referring to what the browser on the target computer displays. Your theory is that that computer and that browser (together) will display the correct information if they had the correct data. How did you prove that?

Browser using java!

Hi all,
I want write a very basic browser using java.
Can you plzz tell me the starting point....I mean which API to look for.
Thanks a buch,
Naren.

Try using JEditorPane. JEditorPane has very limmited HTML support, but it is a good start.

To Develop a Browser using Java

Hi,
I want to know if it is possible to write a browser using java.If so where can i get more information regarding this.
Juz let me know the details.
Thanks in advance...
ramya

Dear Ramya,
You can use JEditorPane with setEditable(false) as the HTML rendering engine. For other components, you have to look elsewhere.
S. Senthil kumar

[svn] 1307: modules: added support for automatically adding " use namespace X", depending on the -target-player value

Revision: 1307
Author: [email protected]
Date: 2008-04-18 16:28:33 -0700 (Fri, 18 Apr 2008)
Log Message:
modules: added support for automatically adding "use namespace X", depending on the -target-player value
* similar to how we add "use namespace AS3"
* symmetric with ASC's -use feature, however we don't have equivalent commandline support yet
Bugs: n/a
QA: Nothing in particular, except for testing the new functionality of -target-player (email me about this)
Doc: Maybe: If we doc about "use namespace AS3" being added to all Flex compiles, we may want to talk about this.
Reviewers: Pete and Erik
Modified Paths:
flex/sdk/trunk/frameworks/flex-config.xml
flex/sdk/trunk/lib/asc.jar
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/BatchCompiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/Compiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/embedding/ScriptCompiler.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/parser/Parser.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/Context.java
flex/sdk/trunk/modules/asc/src/java/macromedia/asc/util/ContextStatics.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/SymbolTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/as3/MetaDataParser.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/Configuration.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/common/DefaultsConfigurator.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleDef.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StyleModule.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/css/StylesContainer.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/InterfaceCompiler.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/reflect/TypeTable.java
flex/sdk/trunk/modules/compiler/src/java/flex2/compiler/mxml/rep/AtEmbed.java
flex/sdk/trunk/modules/swfutils/src/java/flash/swf/tools/SwfxPrinter.java

Thanks for your attention.
In the above logs, higher resolutions seems to be detected on both screens, hence my surprise :
[ 391.631] (II) intel(0): Printing probed modes for output LVDS1
[ 391.631] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
[ 391.897] (II) intel(0): Printing probed modes for output HDMI1
[ 391.897] (II) intel(0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz eP)
If it can help here is also my current xrandr output (after having called it manually to use the preferred resolution of each screen)
itanguy ~ $ xrandr
Screen 0: minimum 320 x 200, current 1680 x 1050, maximum 8192 x 8192
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
1600x900 60.0*+ 40.0
1024x768 60.0
800x600 60.3 56.2
640x480 59.9
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 434mm x 270mm
1680x1050 59.9*+
1280x1024 75.0 60.0
1152x864 75.0
1024x768 75.1 60.0
800x600 75.0 60.3
640x480 75.0 60.0
720x400 70.1
DP1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 disconnected (normal left inverted right x axis y axis)
If needed, I may reboot and provide xrandr output after boot (it will be 1024x768), or could other logs help you ? Please ask...

How to create and install a toolbar to a browser using java

Hi all,
Can any one guide me about how to create and install toolbar to a browser using java ??
please any one help me about this,i am not getting any idea about this..
Thanks and Regards
Sandesh S

I doubt you can. Those browser toolbars are done by implementing to an API provided by the browser. That API, I don't believe, is provided via Java. But of course, that would be entirely up to the browser, not Java.

Which Book is good for e-commerce using JAVA & XML

I want to find a Book that is good for e-commerce using JAVA & XML,
or where can find JAVA & XML new and develop?
can you suggest me?
Thanks very much!

I can recommend "Java and XML" from O'Reilly. It's a very good book.

Where can I download firefox for windows whils using a linux CD?

My current version of Firefox has become corrupt. When I try to download a new version with Internet Explorer or my current version of firefox it goes to 53% unpacked and then it comes up with file corrupt. I have had the same issue before and have solved it by using a linux CD to download a windows version and it unpacks and installs great. I now cannot find a place where I can specify which version I want and it insists on using the download for Linux which is useless for me.

Thank you for your quick reply. I have downloaded it using UBUNTU Put it onto a different partician and have burnt it to a CD and installed it. Its now working perfectly.

Forms Web application is not working on FireFox Browser-with java plugin

Hi All,
We are running custom build forms application using forms 10g and application server 10 g Rel 2. We are using Java Plug-in 1.5.0_06. The application is working fine before recent update from firefox .Now it's not working and keep on asking additional plug in required and taking to java.sun.com for installing the plug in. Even after installing when we access the application it will do the same thing. I tried uninstalling the firefox with the older version and with diffrent java plugin versions.. but the problem still there.. any help will be mush appriciated...
Thanks...
Edited by: rkadaru on May 5, 2010 1:57 PM

plugin and webstart are not yet available in 64bit jre distributions from Sun.
These are targeted to 6u12 or there abouts.
/Andy

Flash plugin installation for Firefox browser

I have a very simple question:
I am running Linux, and I use the latest Firefox browser.
From this site (Adobe) I downloaded the flash plugin
"flash-plugin-9.0.124.0-release.i386.rpm". Then I installed the
package with the "rpm -Uvh ... " command (as superuser of course).
It appeared that the installation succeeded. Afterwards, the
command "rpm -q flash-plugin" shows that it is installed. However,
Firefox still does not see the plash player. What else do I need to
do? Can anybody help?
Thanks for your suggestions.

try this
First, close running Firefox.
Open the terminal (shell prompt)
Install Flash Player
Type the following command to install :
$ sudo apt-get install flashplugin-nonfree
Some people might find voice is not working with newly
installed flash player.
Type following commands to solve this problem
$ sudo apt-get install alsa-oss
$ gksudo gedit /etc/firefox/firefoxrc
Find line that read as FIREFOX_DSP and set to :
FIREFOX_DSP="aoss"
Save and close the file.
Close Firefox and restart it again.

LightweightDispatcher issue with Applets in Browser using Java 7, not 6

Spent the last year at work setting up some GUI JApplets for demos our of code. The JApplets house a number of layers of JPanels and JComponents, but should have no heavyweight components as children. I've set up standalone applications that run one of the JApplets as a child of a JFrame, and those demos have no trouble. When I run the same demo but as a JApplet in a browser, I get errors. Please note that the demo is a JApplet but written like the demo that uses a JFrame, so the JApplet causing an issue is a child of the JApplet the browser knows about.
The issue is seen when the user mouses-over the child JApplet. The listener of the component being moused-over is trying to send an event that the LightweightDispatcher is erroring trying to retarget. It does not seem to find the component that should be receiving the event. For reference, the JApplet implements the mouse-listener interface and is set as the mouse-listener for all its children recursively. Here is the error that is seen:
Exception in thread "AWT-EventQueue-2" java.lang.AssertionError
     at java.awt.LightweightDispatcher.retargetMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.trackMouseEnterExit(Unknown Source)
     at java.awt.LightweightDispatcher.processMouseEvent(Unknown Source)
     at java.awt.LightweightDispatcher.dispatchEvent(Unknown Source)
     at java.awt.Container.dispatchEventImpl(Unknown Source)
     at java.awt.Component.dispatchEvent(Unknown Source)
     at java.awt.EventQueue.dispatchEventImpl(Unknown Source)
     at java.awt.EventQueue.access$000(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.awt.EventQueue$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.awt.EventQueue$4.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.security.ProtectionDomain$1.doIntersectionPrivilege(Unknown Source)
     at java.awt.EventQueue.dispatchEvent(Unknown Source)
     at java.awt.EventDispatchThread.pumpOneEventForFilters(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForFilter(Unknown Source)
     at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
     at java.awt.EventDispatchThread.run(Unknown Source)
and it repeats that for every mouse event that tries to fire within the child JApplet.
Any thoughts on what this could be?
I had a similar issue with key strokes not finding the focused JComponent within the child JApplet, but I made my own KeyboardEventManager to handle that issue. Unfortunately there are no paths like that to override for the mouse listeners, not to mention that there is no focused object for the events erroring.
I do see that when I stop adding the mouse-listeners then the error does not appear, so I'm sure its related to that.
I suppose the most important note here though is that the JApplets were built using Java 6, but the error is seen when running the JApplet with the 1.7 JRE. Also, the JApplet is opened using a JNLP. When the JNLP is set to run at 1.6+ the demo runs fine, when set to 1.7+, the error is seen.
Please let me know if anyone has seen this or has a solution, or if I should report this as a bug to Oracle.

This shouldn't be the case. You did make sure you are pointing the applet at the plug in correct? That means you are using an <object> tag as opposed to the <applet> tag in the HTML file?
If not, run your HTML page through the HtmlConverter that comes with the plugin and try using the resulting HTML.
Bryan

My smartphone Samsung Galaxy Music Duos S6012. It's been released in Dec. 2012 but no support for firefox for mobile. Will it be supported ?

I use Firefox on my desktop and love it. Would love to have it on my smartphone Samsung Galaxy Music Duos S6012. However my smartphone is not supported by firefox. Any changes of it being supported in near future ?
Thanks and Regards
Shriram

Thanks Aron for the reply...
From my smartphone, when I visit google play and search for firefox, both firefox as well as firefox beta are not visible... When I search on my desktop both are visible but saying my device is not supported...
I installed the OpenGL-ES Info app. But when I run it on my device, I just get blank screen with name of the application (OpenGL-ES Info) on top...
No info about OpenGL is displayed... My smartphone has got Ice-cream sandwitch 4.0.4 and it is upgradable to Jelly Bean 4.1
I than installed OpenGLES Extensions Viewer app from google play which displayed the OpenGL details.. Below are the details :
Android Version: 4.0.4
samsung rhea(ARMv7 Processor rev9(v7I)
1 CPU(s)
Resolution: 240x320
Screen Size: LARGE SMALL
Version : OpenGL ES 2.0
Shading Language: OpenGL ES GLSL ES 1.00
Renderer: VideoCore IV HW
Vendor: Broadcom
EGL Vendor: Android
EGL Version: 1.4 Android META-EGL
Max. texture cube map:2048
Max. vertex attribs: 8
Max. texture image units: 8
Max. vertex texture image units: 8
Max. shader binary formats:0
Read color format: 6408
REad color type: 5121
Max. render buffer size: 2048
Max. combined texture image units: 8
Max. varying vectors: 8
Max. vertex uniform vectors: 256
Max. fragment uniform vectors: 256
Num. compressed texture formats:11
Max. texture anisotropy: 0
EGL_KHR_image
GL_APPLE_rgb_422
Looks like my smartphone has got OpenGL ES 2.0 from the above output... Why firefox is not supported in that case ?
Is that anything to do with Shading Language: OpenGL ES GLSL ES 1.00 ???
Thanks & Regards
Shriram

Does EBook-EB720 support a Firefox browser?

purchased the above ebook reader. want to read some items with a browser. Looking through Mozilla I cannot see that there is a browser for the above. Is there?

Hi jules3677,
I can't seem to find any information about the software that runs on the ebook reader. Is it android?
There is a list of devices supported by firefox for mobile [https://www.mozilla.org/en-US/mobile/platforms/ here]. The EB720 is not on it. Firefox for mobile may also work on other android devices (2.1 and above).
If the software on the reader is not android then I am afraid the answer is No.
I hope that helps.
--Edward

Flex/ActionScript3 support for web services using WS-Security

Does Flex/ActionScript3 have support for connecting to a web
service using WS-Security (Policy Creation). I've tried using the
Flex Data Service "Import WSDL" method and it does not allow me to
connect. Is there Flex/AS3 package that can handle creating the
Policy information for a web service that utilizies WS-Security?
Thanks,
Tom

quote:
Does Flex/ActionScript3 have support for connecting to a web
service using WS-Security (Policy Creation).
Yes and no. The "Import WSDL" doesn't create AS3 classes that
allow header injection of the appropriate WS-Security elements.
I've managed to work around this using straight mx:webservice tags
and AS3. There is an open bug at
https://bugs.adobe.com/jira/browse/SDK-15398
that I voted on, the more the merrier.
http://www.jroller.com/wookets/entry/ws_security_in_flex
Has a useful class for creating the soap header elements for a
username token,
In general though, it's been a challenge to get the simplest
of WS-Security pieces working.
-Brett

WebStart support for Firefox Browser using Java Linux AMD64

Similar Messages

Maybe you are looking for