Webutil-Forms(IAS10g) on Linux O.S does not work
Hi folks!.
I have a forms applic. that use webutil library.IAS10g(9.0.4) it is installed on linux,but
i can not execute the entire enviroment.So i put binaries,webutil.jar and jacob.jar
on a windows box with IAS9i(9.0.2) and it is work fine.
I am not sure,but i think it is a problem with sign.properties,sign.bat,and makecert.bat
files.Cause i need webutil for encryptation purposes,and on java console
when a get into enviroment through IAS9i on Windows i see all certification executions on
it,but when i log on Linux-IAS10g enviroment i don't see any certification executions
on java console.
Any people that use Forms(IAS10g)-webutil over Linux O.S could help me?
Two reasons why webutil will not work.
1) your env. Lang = UTL8 ( this is the first problem)
2) in webutil.pll there is a function webutil_core...
where the webutil.cfg will be read. Here the
libaray will hang up. Insert a return result... then it will work fine.
Similar Messages
-
Linux logfile monitoring does not work after using "privileged datasource"
Hello!
I have noticed a strange behaviour on one of my Linux Agents (lets call it server_a) regarding logfile monitoring with the "Microsoft.Unix.SCXLog.Datasource" and the "Microsoft.Unix.SCXLog.Privileged.Datasource".
After successfully testing monitoring of /var/log/messages on server_a with the "Privileged Datasource". This test has been on server_a and the MP containing this rule has been delete from the management gorup before the following tests.
I wanted to test another logfile (lets call it logfile_a) using the normal datasource "Microsoft.Unix.SCXLog.Datasource" on server_a. So I created the usual logfile rule (rule_a) in XML (which I have done countless times before) for monitoring
logfile_a. Logfile_a has been created by the "Linux Action Account User" with reading rights for everyone. After importing the Management Pack with the monitoring for logfile_a I had the following warning alert in the scom console managing
server_a:
Fehler beim Überprüfen der Protokolldatei "/home/ActionAccountUser/logfile_a" auf dem Host "server_a" als Benutzer "<SCXUser><UserId>ActionAccountUser</UserId><Elev></Elev></SCXUser>";
An internal error occurred. (the userid has been changed to keep the anonimity of our action account).
To make sure I did not make any mistakes in the XML i have created a new logfile rule (rule_b) monitoring "logfile_b" on "server_a" using the "Logfile Template" under the authoring tab. logfile_b was also created by the "Linux
Action Account User" and had reading rights for everyone. Unfortunately this logfile rule created the same error:
Fehler beim Überprüfen der Protokolldatei "/home/ActionAccountUser/logfile_b" auf dem Host "server_a" als Benutzer "<SCXUser><UserId>ActionAccountUser</UserId><Elev></Elev></SCXUser>";
An internal error occurred. (the userid has been changed to keep the anonimity of our action account).
Although both rules (rule_a and rule_b) used the "Microsoft.Unix.SCXLog.Datasource" which uses the Action Account for monitoring logfiles, the above error looks to me as SCOM wants to use the privileged user, which in this case it not necessary
as the Action Account can read logfile_a and logfile_b without any problems.
So after a few unsuccessfull tries to get both rules to raise an alert I tried to use the "Microsoft.Unix.SCXLog.Privileged.Datasource" for rule_a as last resort. Then suddenly after importing the updated Management Pack I finally received the
alert I desperately waited for this whole time.
Finally after lot of text here are my questions:
Could it be that the initial test with the Privileged Log Datasource somehow screwed up the agent on server_a so it could not monitor logfiles with the standard log datasource? Or may anyone of you might have an idea what went wrong here.
Like I said both logfile could be accessed and changed by the normal Action Account without any problems. So privileged right are not needed. I even restarted the scom agent in case something hanged.
I hope I could make the problm clear to you. If not, don´t hesitate to ask any questions.
Thank you and kind regards,
PatrickHello!
After all that text, I fogrot the most essential information..
We are currently using OpsMgr 2012 SP1 UR4, the monitored server (server_a) has agent version 1.4.1-292 installed.
Thanks for the explanation of how the logprovider works. I tried to execute the logfilereader just to see if there are any errors and everything looks fine to me:
ActionAccount @server_a:/opt/microsoft/scx/bin> ./scxlogfilereader -v
Version: 1.4.1-292 (Labeled_Build - 20130923L)
Here are the latest entry in the scx.log file:
* Microsoft System Center Cross Platform Extensions (SCX)
* Build number: 1.4.1-292 Labeled_Build
* Process id: 23186
* Process started: 2014-03-31T08:29:09,136Z
* Log format: <date> <severity> [<code module>:<process id>:<thread id>] <message>
2014-03-31T08:29:09,138Z Warning [scx.logfilereader.ReadLogFile:23186:140522274359072] scxlogfilereader - Unexpected exception: Could not find persisted data: Failed to access filesystem item /var/opt/microsoft/scx/lib/state/ActionAccount/LogFileProvider__ActionAccount_shome_sActionAccount_slogfilewithoutsudo.txtEDST02
2014-03-31T08:29:09,138Z Warning [scx.core.providers.logfileprovider:5209:140101980321536] LogFileProvider InvokeLogFileReader - Exception: Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4
2014-03-31T08:29:09,138Z Warning [scx.core.providers.logfileprovider:5209:140101980321536] BaseProvider::InvokeMethod() - Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4 - [/home/serviceb/ScxCore_URSP1_SUSE_110_x64/source/code/providers/logfile_provider/logfileprovider.cpp:442]
* Microsoft System Center Cross Platform Extensions (SCX)
* Build number: 1.4.1-292 Labeled_Build
* Process id: 23284
* Process started: 2014-03-31T08:30:06,139Z
* Log format: <date> <severity> [<code module>:<process id>:<thread id>] <message>
2014-03-31T08:30:06,140Z Warning [scx.logfilereader.ReadLogFile:23284:140016517941024] scxlogfilereader - Unexpected exception: Could not find persisted data: Failed to access filesystem item /var/opt/microsoft/scx/lib/state/ActionAccount/LogFileProvider__ActionAccount_shome_sActionAccount_stest.txtEDST02
2014-03-31T08:30:06,142Z Warning [scx.core.providers.logfileprovider:5209:140101980321536] LogFileProvider InvokeLogFileReader - Exception: Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4
2014-03-31T08:30:06,143Z Warning [scx.core.providers.logfileprovider:5209:140101980321536] BaseProvider::InvokeMethod() - Internal Error: Unexpected return code running '/opt/microsoft/scx/bin/scxlogfilereader -p': 4 - [/home/serviceb/ScxCore_URSP1_SUSE_110_x64/source/code/providers/logfile_provider/logfileprovider.cpp:442]
Strangely I could not acces the "Action Account User" directory under /var/opt/microsoft/scx/log as "ActionAccount" user. Is it ok for the directory to have the following rights: drwx------ 2 1001 users? Instead of "1001" it should say "ActionAccount",
right?
This could be a bit far fetched, but perhaps the logfile provider can´t access logfiles as the "ActionAccount" on this server because it needs to write in the scx.log file. But as the "ActionAccount" can´t access the file, the logfile provider throws
an error. And as "Privileged Account" the rule works flawlessly, as the logfile provider running in root context can access everything.
Don´t know if that makes sense, but right now it sounds logical to me. -
Linux shared library does not work in fedora core 4
I have transferred an application that ran perfectly on fedora 3 to fedora 4. It uses a shared library that I wrote in C.
The vis no longer appear to recognise this file as a shared
library. I have recompiied the library in fedora 4 but this makes
no difference.
Any ideas?Hi jbroughton,
There are few things that I need to know in order to investigate why your file is no longer being recognised:
What version of LabVIEW are you using?
What is your kernal version of federa four?
Is your application a built executable?
What is your librarying doing currently when you try to call it? If any error popups what are the error codes and messages you are getting?
Can you call your C library outside of LabVIEW?
Thanks
Emma R
NIUK & Ireland -
WebLogic 8.1 SP4 on Linux - thread dump does not work
I have setup WebLogic 8.1 SP4 on RedHat Linux AS 3.3 with Sun JVM (142_05). When I try to perform a thread dump using weblogic.Admin, I receive the following error in the stderr file. I have also tried the kill -3 but still no thread dump. Is there some trick to this ?
cannot load libary 'stackdump': java.lang.UnsatisfiedLinkError: no stackdump in java.library.pathI am getting the same error as well
cannot load libary 'stackdump': java.lang.UnsatisfiedLinkError: no stackdump in java.library.path
I am creating a simple domain using the domain config wizard and I hope all the PATH and LD_LIBRARY_PATH are set by the default scripts. But I am still getting this error.
But Kill -3 <PID> works though!
Is is a know problem OR am I missing something?!
Bala -
Only on one linux machine sync does not work and message is useless
On one Linux machine, running OpenSuse 11.3, I cannot sync. The error message is useless, all it says is that sync failed for an unknown reason. Sync works on all the other machines, Win 2K running in a XEN VM on Linux (customized kernel and environment that started a few years ago as OpenSuse 10.3), Linux Mint and XP on a laptop.
I checked the key, its the same as all the other machines, checked the iptables log, no problems, etc.. Since I have no access to any internal data or logs, I cannot go any further in assessing the problem.
Firefox version is 4.01, extensions are the same for all versions running on the various machines.Ah! You are still using the old sync account. (deprecated) will be next to the Firefox Sync account. Try the new one :-) [[How to update to the new Firefox Sync]]
-
Access to Outlook Anywhere does not work
Good evening,
I recently installed an Exchange Server 2013 CAS / MB.
Until now, the server presented a few errors (mainly in the
event log) that does not seem to significantly influence functionality.
This week I published the server on the Internet and verified various malfunctions
related to the access from outside.
In particular from outside:
1 - OWA does not work with Windows integrated authentication, it works with the Forms based authentication;
2 - Outlook Anywhere does not work from internet.
I've done a lot of research and testing without success.
With regard to the first issue (which is not a priority but can relate to second one)
add that in Firefox I get a first authentication request. If
I enter credentials it ask again for identical authentication (repeatly), if I cancel it shows a second one that instead allows me access (are slightly different).
I assume that the first is the integrated Windows application and the second is basic authentication.
Internet Explorer shows me only the first authentication request and if I cancel shows blank page.
The problem is
priority 2:
Outlook connects without problems on LAN network, the Internet
seems to download the correct information
(autodiscover), but then does not connect
to the server (connection to Microsoft Exchange is unavailable).
If you manually edit the settings,
auto-configuration server returns as
a [email protected]. If I change
manually the server (and proxy settings
http), the result does not change.
- Setting information -
The server is installed
in the LAN network and is exposed on the Internet through
a firewall (Pat on port 443, et al. not 80)
on a public address.
The public and private DNS have been configured with a
host record (A) and two
CNAME (webmail and autodiscover).
The internal Outlook clients connect
with autodiscover and HTTPS /
NTLM / SSL (Outlook connectivity
status).
IMAP, SMTP, POP, ActiveSync function.
Exchange remote connectivity analizer retrieves Autodiscover information but doesn't pass test for RPC/HTTP access (it discard accesson
port 443 and try port 80, SPF isn't configured).
The navigation to the url
https://proxyexternalURL/rpc/rpcproxy.dll has the same behaviour like problem 1.
Test-OutlookConnectivity returns unmanaged error ('WARNING: An unexpected error has occurred and a Watson dump is being generated: Failed to find the probe result for invoke now request id -- and probe workdefinition id --').
Errors in eventviewer: 5011 - WAS (one time), 139 - MSExchange OWA (some not ripetitive), 3028 - MSExchangeApplicationLogic (every 6 hours), 106 - MSExchange common (many during working hour), 65535 - application (some at nighttime 00.00 - 03.00 a.m.), 1006
- MSExchangeDiagnostic (every 30 min), 6002 - MSExchange Mid-Tier Storage (about every 5 minutes), 5 - MSExcahnge Workload Management (one time).
Ask for further information.
- Cmdlet and Autodiscover output -
Get-OutlookAnywhere | fl name,*auth*,*ssl*,*host*
Name : Rpc (Default Web site)
ExternalClientAuthenticationMethod : Basic
InternalClientAuthenticationMethod : Ntlm
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
SSLOffloading : True
ExternalClientsRequireSsl : True
InternalClientsRequireSsl : True
ExternalHostname : webmail.name_domain.test
InternalHostname : webmail.name_domain.test
Get-OutlookProvider | ft -autosize
Name Server CertPrincipalName TTL
EXCH msstd:webmail.name_domain.test 1
EXPR msstd:webmail.name_domain.test 1
WEB
1
Get-AutodiscoverVirtualDirectory | fl name,*auth*,*url*
Name : Autodiscover (Default Web site)
InternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
ExternalAuthenticationMethods : {Basic, WSSecu.testy, OAuth}
LiveIdNegotiateAuthentication : False
WSSecu.testyAuthentication : True
LiveIdBasicAuthentication : False
BasicAuthentication : True
DigestAuthentication : False
WindowsAuthentication : False
OAuthAuthentication : True
AdfsAuthentication : False
InternalUrl :
ExternalUrl :
Get-MapiVirtualDirectory | fl name,*auth*,*url*
Name : mapi (Default Web site)
IISAuthenticationMethods : {Basic, Ntlm, Negotiate}
InternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
ExternalAuthenticationMethods : {Basic, Ntlm, Negotiate}
InternalUrl : https://webmail.name_domain.test/mapi
ExternalUrl : https://webmail.name_domain.test/mapi
Autodiscover.xml
<?xml version="1.0" encoding="utf-8"?>
<Autodiscover xmlns="http://schemas.microsoft.com/exchange/autodiscover/responseschema/2006">
<Response xmlns="http://schemas.microsoft.com/exchange/autodiscover/outlook/responseschema/2006a">
<User>
<DisplayName>user</DisplayName>
<LegacyDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Recipients/cn=e4c0c18c8f214afbb5152bb08823179d-user</LegacyDN>
<AutoDiscoverSMTPAddress>user@name_domain.test</AutoDiscoverSMTPAddress>
<DeploymentId>d60c71c9-3740-404c-a38c-aa24e6105432</DeploymentId>
</User>
<Account>
<AccountType>email</AccountType>
<Action>settings</Action>
<MicrosoftOnline>False</MicrosoftOnline>
<Protocol>
<Type>EXCH</Type>
<Server>72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</Server>
<ServerDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test</ServerDN>
<ServerVersion>73C082C8</ServerVersion>
<MdbDN>/o=organization_name/ou=Exchange Administrative Group (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=72036b30-a4d4-4b42-9c39-445bd04c23a6@name_domain.test/cn=Microsoft Private MDB</MdbDN>
<PublicFolderServer>webmail.name_domain.test</PublicFolderServer>
<AD>DC2.name_domain.test</AD>
<ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
<EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
<OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
<ServerExclusiveConnect>off</ServerExclusiveConnect>
<CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
</Protocol>
<Protocol>
<Type>EXPR</Type>
<Server>webmail.name_domain.test</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
<EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
<EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
<OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
<UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
<ServerExclusiveConnect>on</ServerExclusiveConnect>
<CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
<EwsPartnerUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsPartnerUrl>
<GroupingInformation>LAN</GroupingInformation>
</Protocol>
<Protocol>
<Type>WEB</Type>
<Internal>
<OWAUrl AuthenticationMethod="Basic, Fba">https://webmail.name_domain.test/</OWAUrl>
<Protocol>
<Type>EXCH</Type>
<ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
</Protocol>
</Internal>
<External>
<OWAUrl AuthenticationMethod="Basic">https://webmail.name_domain.test/</OWAUrl>
<Protocol>
<Type>EXPR</Type>
<ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
</Protocol>
</External>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>webmail.name_domain.test</Server>
<SSL>On</SSL>
<AuthPackage>Ntlm</AuthPackage>
<ASUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</ASUrl>
<EwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
<EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
<OOFUrl>https://webmail.name_domain.test/EWS/Exchange.asmx</OOFUrl>
<UMUrl>https://webmail.name_domain.test/EWS/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
<CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
</Protocol>
<Protocol>
<Type>EXHTTP</Type>
<Server>webmail.name_domain.test</Server>
<SSL>On</SSL>
<AuthPackage>Basic</AuthPackage>
<ASUrl>https://webmail.name_domain.test/ews/exchange.asmx</ASUrl>
<EwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EwsUrl>
<EmwsUrl>https://webmail.name_domain.test/ews/exchange.asmx</EmwsUrl>
<EcpUrl>https://webmail.name_domain.test/ecp/</EcpUrl>
<EcpUrl-um>?rfr=olk&p=customize/voicemail.aspx&exsvurl=1&realm=name_domain.test</EcpUrl-um>
<EcpUrl-aggr>?rfr=olk&p=personalsettings/EmailSubscriptions.slab&exsvurl=1&realm=name_domain.test</EcpUrl-aggr>
<EcpUrl-mt>PersonalSettings/DeliveryReport.aspx?rfr=olk&exsvurl=1&IsOWA=<IsOWA>&MsgID=<MsgID>&Mbx=<Mbx>&realm=name_domain.test</EcpUrl-mt>
<EcpUrl-ret>?rfr=olk&p=organize/retentionpolicytags.slab&exsvurl=1&realm=name_domain.test</EcpUrl-ret>
<EcpUrl-sms>?rfr=olk&p=sms/textmessaging.slab&exsvurl=1&realm=name_domain.test</EcpUrl-sms>
<EcpUrl-publish>customize/calendarpublishing.slab?rfr=olk&exsvurl=1&FldID=<FldID>&realm=name_domain.test</EcpUrl-publish>
<EcpUrl-photo>PersonalSettings/E.testAccount.aspx?rfr=olk&chgPhoto=1&exsvurl=1&realm=name_domain.test</EcpUrl-photo>
<EcpUrl-tm>?rfr=olk&ftr=TeamMailbox&exsvurl=1&realm=name_domain.test</EcpUrl-tm>
<EcpUrl-tmCreating>?rfr=olk&ftr=TeamMailboxCreating&SPUrl=<SPUrl>&.testle=<.testle>&SPTMAppUrl=<SPTMAppUrl>&exsvurl=1&realm=name_domain.test</EcpUrl-tmCreating>
<EcpUrl-tmE.testing>?rfr=olk&ftr=TeamMailboxE.testing&Id=<Id>&exsvurl=1&realm=name_domain.test</EcpUrl-tmE.testing>
<EcpUrl-extinstall>Extension/InstalledExtensions.slab?rfr=olk&exsvurl=1&realm=name_domain.test</EcpUrl-extinstall>
<OOFUrl>https://webmail.name_domain.test/ews/exchange.asmx</OOFUrl>
<UMUrl>https://webmail.name_domain.test/ews/UM2007Legacy.asmx</UMUrl>
<OABUrl>https://webmail.name_domain.test/OAB/e66d9a4a-6ed2-4512-b72f-522381524dd9/</OABUrl>
<ServerExclusiveConnect>On</ServerExclusiveConnect>
<CertPrincipalName>msstd:webmail.name_domain.test</CertPrincipalName>
</Protocol>
</Account>
</Response>
</Autodiscover>
Get-OwaVirtualDirectory | fl name,*auth*,*url*
Name : owa (Default Web Site)
ClientAuthCleanupLevel : High
InternalAuthenticationMethods : {Basic, Fba}
BasicAuthentication : True
WindowsAuthentication : False
DigestAuthentication : False
FormsAuthentication : True
LiveIdAuthentication : False
AdfsAuthentication : False
OAuthAuthentication : False
ExternalAuthenticationMethods : {Basic}
Url : {}
SetPhotoURL :
Exchange2003Url :
FailbackUrl :
InternalUrl : https://webmail.name_domain.test/
ExternalUrl : https://webmail.name_domain.test/Follow the results of the test
Outlook Anywhere (RPC over HTTP).
Has been used an account for which
outlook anywhere works. The account
for which the outlook anywhere does not work is
an administrative account and therefore
can not be used in the test.
Autodiscovery returns the
same result for both mailbox.
I'm testing RPC/HTTP connectivity.
Testing RPC over HTTP has not been exceeded.
Test steps
Microsoft connectivity Analyzer is attempting to test the Autodiscover service for user_test@domain_name.test.
Test the Autodiscover service has not been exceeded.
Test steps
I'm trying to contact the Autodiscover service with each method available.
I was not able to contact the Autodiscover service with no method.
Test steps
I'm trying to test the possible URL for the Autodiscover service https://domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.www
I'm testing the TCP port 443 on the host domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Remote certificate subject: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test issuer: E = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name,
L = city, S = state, C = test.
I am validating the certificate name.
I could not validate the certificate name.
More info about this issue and how to resove it
The host name domain_name. testing does not match any name found on the certificate and server = it_staff@domain_name.test, CN = * domain_name. test, OU = it staff, O = domain_name, L = city, S = state, C = test.
I'm trying to test the possible URL for the Autodiscover service https://autodiscover.domain_name.test/AutoDiscover/AutoDiscover.xml
The test of this potential URL for the Autodiscover service has not been exceeded.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 443 on the host autodiscover. domain_name. tests to check that is open and listening.
The door has been opened properly.
I'm testing the validity of your SSL certificate.
The SSL certificate has not exceeded one or more validation controls.
Test steps
Microsoft connectivity Analyzer is attempting to obtain the SSL certificate from the remote server autodiscover. domain_name. test on port 443.
Microsoft connectivity Analyzer got the remote SSL certificate.
Other details
Remote certificate subject: CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test issuer: CN = domain_name-DC1-CA, DC = domain_name, DC = test.
I am validating the certificate name.
I validated the certificate name.
Other details
I found the host name autodiscover. domain_name. test in the voice of the alternative name of the certificate object.
Elapsed time: 1 ms.
I am validating the reliability of certificates.
I was not able to validate the reliability of the certificate.
Test steps
Microsoft connectivity Analyzer is attempting to generate certificate chains to a certificate CN = webmail. domain_name. test, OU = it staff, O = domain_name, L = city, S = city, C = test.
I failed to build a certificate chain for the certificate.
Other details
Failed to generate the certificate chain.
May be missing the required intermediate certificates.
I'm trying to contact the Autodiscover service using the HTTP redirect method.
I was not able to contact the Autodiscover service using the HTTP redirect method.
Test steps
I'm trying to resolve the host name autodiscover. domain_name. DNS test.
I was able to resolve the host name.
IP addresses are returned: xxx.yyy.zzz.kkk
I'm testing the TCP port 80 on the host autodiscover. domain_name. tests to check that is open and listening.
The specified port is blocked, is not listening or doesn't produce the expected response.
More info about this issue and how to resove it
I encountered a network error while communicating with the remote host.
I'm trying to
find the
SRV DNS record _audiscover._tcp.domain_name.test.
I failed to find
the SRV record of the
Autodiscover service
in DNS.
Some clarifications:
1 - xxx.yyy.zzz.www and xxx.yyy.zzz.kkk
are two static public addresses
of which only the latter exposes Exchange services;
2 - The certificate
*. Domain_name.test is not related
to Exchange services;
3 -I imported the certificate
of the issuing CA on the standalone test PC to validate the certificate.
3- The port 80 is not open and are not published SRV records.
Best regards. -
Error: ELM does not work from UI
Hello guru´s,
hard to explain this briefly, but here it goes.
We´re trying to upload an ELM from UI, and it doesn´t work. But the thing is, if you just SAVE from UI (not launch), and then you go to CRMD_MKTLIST and you flag required fields, it works. But obviously, we need to do that from UI.
Besides this, we´ve implemented a Badi CRM_MKTLIST_BADI for a specific format but it´s never called from UI; however, if we simulate the execution from SAP GUI, this BADI works correctly.
Thanks in advance.SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik -
10g JSpell PJC does not work with latest JSpell version
Looks like latest (10g) forms demo - Spell check with JSpell does not work with the latest version of the JSpell software (does not look like this demo been changed from the previous version).
Does anybody has a success running this or have any suggestions how to integrate it together?
Thanks for any input.We're in contact with JSpell on this issue and will revise the integration code as soon as we recieve the relevant updates from them.
-
DefaultCommand and initialFocusId does not work!
The defaultCommand on af:form and initialFocusId on af:document does not work in ADF Faces ( alt least for me)!
Does it work for anybody else?
This is functionality we cannot do without!
JohnnyHi,
the initial focusId is a bug that is already filed. The failing of defaultCommand isn't reported as far as i can see. So hances are this is another issue to follow up on
Frank -
Error Parser does not work, even in SSX3
SunSudio Express (December 2006 release) introduces some interesting new features, but there are still problems. For the first time, I was able to debug Fortran 90 applications in Linux, but debugging is still very limited. Furthermore, the Fortran error parser does not work, even when compiling using Sun's f95 compiler. This is a heavy disadvantage. I assume that Fortran error parsing is not supported on Linux, although the tutorials don't make this point clear: In the Options window, there are settings concerning C/C++ (and its parser), but there are no similar options for the Fortran parser, even in "Advanced Setings" (which are similar to the old Options window). My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.
I don't think that I'm doing something wrong, but I want to ask, just to be sure: has someone had seen the Fortran error parser working on Linux? What about Fortran word completion?SunSudio Express (December 2006 release) introduces some
interesting new features, but there are still problems. For the first time,
I was able to debug Fortran 90 applications in Linux, but debugging is
still very limited. This is good to know that you were able to debug a f90 application
on Linux. What problems do you see? Please, report them, and we
will file them as bugs or RFEs (requests for enhancements).
Furthermore, the Fortran error parser does not work, even when
compiling using Sun's f95 compiler. Yes, you are right, this feature does not work yet.
This is a heavy disadvantage. I assume that Fortran error parsing
is not supported on Linux, although the tutorials don't make this
point clear: Yes, it does not work yet on all platforms.
In the Options window, there are settings concerning C/C++ (and
its parser), but there are no similar options for the Fortran parser,
even in "Advanced Settings" (which are similar to the old Options
window). There will be similar options for Fortran.
My Linux system is Debian 3.1 (Sarge), with JDK 1.5.0.09.JDK 1.5.0.09 is ok.
We do not target Debian system, but we assume everything
should work there (we test on Red Hat and SUSE).
Good to know that our assumption is correct :-)
I don't think that I'm doing something wrong, but I want to ask, just
to be sure: has someone had seen the Fortran error parser working
on Linux? No. It does not work on Linux, and it does not work on other platforms.
What about Fortran word completion? No, this feature is not implemented yet.
Thanks you for trying Sun Studio 12 Express release and for your report.
Nik -
I downlaod bdb-5.0.21 and build it on the arm linux.But dbsql does not working.
root@Moxa:/dev/shm# ./dbsql a.db
Berkeley DB 11g Release 2, library version 11.2.5.0.21: (March 30, 2010)
Enter ".help" for instructions
Enter SQL statements terminated with a ";"
dbsql> create table b( t int);
/dev/shm/a: library build did not include support for locking
/dev/shm/a: library build did not include support for locking
/dev/shm/a: library build did not include support for locking
/dev/shm/a: library build did not include support for locking
/dev/shm/a: library build did not include support for locking
/dev/shm/a: PANIC: Operation not supported
/dev/shm/a: unable to join the environment
Error: database disk image is malformed
dbsql> .quitHello,
How did you configure/build the Berkeley DB SQL interface? And are you sure your PATH, LD_LIBRARY_PATH are set up properly?
I just built 11.2.5.0.21 on Linux configuring with --enable-sql and I can run your test:
dbsql
Berkeley DB 11g Release 2, library version 11.2.5.0.21: (March 30, 2010)
Enter ".help" for instructions
Enter SQL statements terminated with a ";"
dbsql> create table b(t int);
dbsql>
The build instructions are at:
http://www.oracle.com/technology/documentation/berkeley-db/db/installation/build_unix_sql.html
Thanks,
Sandra -
Excel File read using WebUtil does not work. Gives java.lang.NoSuchMethodEr
We have a form which reads from an Excel File. The form works in development env., but in the live env when we deployed the form it does not work. Form fails @ the 1st call to Client_OLE2 where we set the Excel file to read.
For both the envs. the values are given here:
(1.) Client Forms Version : Forms [32 Bit] Version 10.1.2.0.2 (Production)
(2.) Application Server Version : 10.1.2.0.2
(3.) AS Linux Version : (Live) RHEL 5.7 Tikanga / (Dev) Red Hat Enterprise Linux AS release 4 (Nahant Update 4)
(4.) Client Sun JRE Version :Version 1.5.0 (build 1.5.0_10)
(5.) Client Web Browser & Version: I.E 8.0.6001 or Mozilla 3.0.15
(6.) WebUtil Version: 1.0.6Both envs. are the same except the Linux version.
Works fine in Dev but does not work in Live. Other Webutil functions like file open dialog box works fine in live, only this Excel read is not working.
Full Error message
Java Plug-in 1.5.0_10
Using JRE version 1.5.0_10 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\dinesha.IIL
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
RegisterWebUtil - Loading WebUtil Version 1.0.6
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
Forms Applet version is : 10.1.2.0
Exception in thread "AWT-EventQueue-3" java.lang.NoSuchMethodError:
com.jacob.com.Dispatch.put(Ljava/lang/Object;Ljava/lang/String;Ljava/lang/Object;)V
at
oracle.forms.webutil.ole.OleFunctions.set_obj_property(OleFunctions.java:1216)
at
oracle.forms.webutil.ole.OleFunctions.setProperty(OleFunctions.java:333)
at oracle.forms.handler.ComponentItem.setCustomProperty(Unknown Source)
at oracle.forms.handler.ComponentItem.onUpdate(Unknown Source)
at oracle.forms.handler.JavaContainer.onUpdate(Unknown Source)
at oracle.forms.handler.UICommon.onUpdate(Unknown Source)
at oracle.forms.engine.Runform.onUpdateHandler(Unknown Source)
at oracle.forms.engine.Runform.processMessage(Unknown Source)
at oracle.forms.engine.Runform.processSet(Unknown Source)
at oracle.forms.engine.Runform.onMessageReal(Unknown Source)
at oracle.forms.engine.Runform.onMessage(Unknown Source)
at oracle.forms.engine.Runform.processEventEnd(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.redispatchEvent(Unknown Source)
at oracle.ewt.lwAWT.LWComponent.processEvent(Unknown Source)
at java.awt.Component.dispatchEventImpl(Unknown Source)
at java.awt.Container.dispatchEventImpl(Unknown Source)
at java.awt.Component.dispatchEvent(Unknown Source)
at java.awt.EventQueue.dispatchEvent(Unknown Source)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(Unknown
Source)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.pumpEvents(Unknown Source)
at java.awt.EventDispatchThread.run(Unknown Source)We connected to Live AS server via VPN and ran the Form in a client machine (where the Dev. is working) but same problem.
Any help would be greatly appreciated.Channa,
I sounds like you might have missed a configuration step on your Linux application server (AS). I recommend you go back through the configuration of your AS and verify each step of the WebUtil Runtime Setup Checklist was completed correctly. Seach the Forms Help system on "Runtime Setup Checklist" for a copy of the checklist.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly. -
Insert in Tabular form does not work after the upgrade to APEX 4.0
Hi all,
Thx in advance for looking into the issue.
We are running into following issue when we upgraded APEX 3.2 to APEX 4.02
1) The Tabular form insert does not work.
2) We are fatching the value of the Global variable APEX_APPLICATION.g_XXXX in a procedure and we get null for this value after submit for new row to be inserted.
The tabular form was working fine in APEX 3.2.
The Update and Delete works just fine.
Any help in this regard is highly appreciated.
Thx and regards,
MaheshHere is my workaround to get the ADDROW/SUBMIT working again if you have a legacy Tabular Form:
1 PAGE ATTRIBUTES
JAVASCRIPT
FUNCTION AND GLOBAL VARIABLE DECLARATION
var htmldb_delete_message='"DELETE_CONFIRM_MSG"';
2 DELETE BUTTON
ACTION WHEN BUTTON CLICKED
URL Target change to
javascript:apex.confirm(htmldb_delete_message,'MULTI_ROW_DELETE');
3 ADDROW BUTTON
ACTION WHEN BUTTON CLICKED
Action
redirect to URL
URL Target
javascript:addRow();
4 PROCESS
APPLYMRU (activitated by button ADDROW)
CONDITION
never or delete
5 PROCESS
ADDROWS
CONDITION
never or delete
6 CHANGE PAGE TEMPLATE to e.g. THEME 13 One Level Tabs.
7 IF YOU WANT ADD FUNCTIONALITY TO GOTO BOTTOM OF PAGE AFTER ADDROW
1. In the page footer put <a name="bottom_of_page"></a>
2. Amend the action when the "ADD" button is clicked to scroll down to the new region by doing the following:
- edit "ADD" button
- Go to "Action when button Clicked" section
- Amend "URL Target" from
javascript:addRow();
to
javascript:addRow();window.location='#bottom_of_page' ;
regards
PaulP -
Update process does not work on Tabular Form
Hello,
I have 2 tabular forms on one page, which are using manual update processes.
First form is created using wizard, and therefore works perfectly.
The update process is as follows:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f01.COUNT
LOOP
lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*03*(i) || '|' || APEX_APPLICATION.G_f*04*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Second form is created manually, using the following code:
SELECT apex_item.checkbox (30,
'#ROWNUM#',
'onclick="highlight_row(this,' || '#ROWNUM#'|| ')"',
NULL,
'f30_' || '#ROWNUM#'
) delete_checkbox,
CATALOG_ID,
apex_item.hidden (31, CATALOG_ID)
|| apex_item.text (32,
LANG,
80,
100,
'style="width:100px"',
'f32_' || '#ROWNUM#'
|| apex_item.hidden (33, wwv_flow_item.md5 (LANG, DESCRIPTION)) LANG,
apex_item.text (34,
DESCRIPTION,
80,
100,
'style="width:255px"',
'f34_' || '#ROWNUM#'
) DESCRIPTION
FROM V_CATALOGS
UNION ALL
SELECT apex_item.checkbox
(30,
TO_NUMBER(9900 + LEVEL),
'onclick="highlight_row(this,' || '#ROWNUM#' || ')"',
NULL,
'f30_' || TO_NUMBER (9900 + LEVEL)
) delete_checkbox,
NULL,
apex_item.hidden (31, NULL)
|| apex_item.text (32,
NULL,
80,
100,
'style="width:100px"',
'f32_' || TO_NUMBER (9900 + LEVEL)
|| apex_item.hidden (33, NULL) LANG,
apex_item.text
(34,
NULL,
80,
100,
'style="width:255px" ' ,
'f34_'
|| TO_NUMBER (9900 + LEVEL)
) DESCRIPTION
FROM DUAL
WHERE :P18_TEMP = 'ADD_ROWS1'
CONNECT BY LEVEL <= 1However, the update process does not work on this form.
I created it using the first one as an example, but with the id's of the second form:
DECLARE
lc_string VARCHAR2(4000);
BEGIN
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
LOOP
lc_string := lc_string|| '[' ||APEX_APPLICATION.G_f*32*(i) || '|' || APEX_APPLICATION.G_f*34*(i) || ']';
END LOOP;
--Database processing using the concatenated string here
END;Also, both forms are opening in a modal pop-up dialog window.
I use a Dialog Region plug-in for that.
Please advise, what is causing a problem with update?Sloger,
if this is your tabular form
SELECT apex_item.checkbox (30,
...and this is your update statement
FOR i IN 1..APEX_APPLICATION.G_f*30*.COUNT
...Then you will only ever update records that have been checked. Unchecked checkboxes are not passed back in the global array. You need to have a hidden column with the ID's for the record and loop through that when you are updating/inserting. That is why the built in tabular form has a MRU and a MRD. the MRU loops through the hidden ID column. The MRD loops through the checkbox.
Thanks,
Tyson Jouglet -
Command_link does not work outside of form
if command_link is outside of form, it is rendered without a warning notes, but does not work correctly.
Sorry, you did not get my point again.
Currently, I check how JSF RI helps developer to recognize his/her mistakes.
In case of command_link outside of the form, RI says "Everything is all right. Spend the next couple minutes (couple hours or days, depends of developer qualification) to find this trick.
Maybe you are looking for
-
I created a pdf fillable form using Acrobat 9 and imported it into FormsCentral. Everything works fine! Is it possible now to make the form fillable as a web form? That would be not just a homerun, but a grand slam for me!
-
I paid for the program and cannot access it please help may i talk to someone?
-
Nokia 6210 Nav, PC Connectivity Cable Drivers
When trying to connect my 6210 to my PC it takes about an hour or more and it says it is installing the PC Connectivity Drive. After all this it seems to only stay connected for a short time and then drops out. Can anyone offer help? Thanks
-
My Java Virtual Machine cannot be found?
I just installed SPSS (statistics software) for school. I have an error at -36 and my Java Virtual Machine cannot be found. What is the issue, and what are my options?
-
Hi , I created a Navigation Bar of 'Element Type' - Categories and gave the 'Dispaly Mode' as Drop-down List . I attached this through the Navigation Bar Portlet in my Page. When I try to submit the list by the Button 'GO' it gives me the following e