Weird Access Problems - Really Need Your Advice

This is complex and confusing, and I am not an IT expert. Let me provide background and symptoms:
1) I recently moved and transferred ISP providers from Cox to Adelphia.
2 My setup consists of Mac G5, a Powerbook, and an Airport Station. The internet cable from Adelphia runs into the Airport Station. A cable then runs from the Airport Station to the G5, and the connection to the Powerbook is made via wireless. This setup worked very well when Cox was my ISP
3) My Apple Mail client accesses mail servers at Cox, Adelphia, Gmail, and .Mac,
4) When I made the hookup described in 2) I was no longer able to access Gmail from Safari. However, when I directly connected the Adelphia cable to the G5 (cutting the Airport out of the loop) I was able to access Gmail.
5) Upon review from Adelphia they suggested that I make sure that there no static entries had been placed in the DHCP field. I checked the field using the Airport software and cleared the field (I am not sure if this was static entry or had been placed there by Adelphia).
6) I hooked the computers and Airport up as in 2). Now the Gmail could be accessed from Safari. HOWEVER, now I could not access Adelphia's mail from Safari. Also I found that I could not access some the the web pages that came up as a result of Google searchs. This has never occurred before.
7) Additionally, I found now when directly connected the G5 to the Adelphia cable I could still get Gmail, but I no longer could access .Mac from Safari.
Note: I have gone through the same steps above using Foxfire and get similar results
BASIC SUMMARY: 1) When Airport is in the connections cannot get access .Mac from Safari (but can access Gmail and Adelphia). 2) When the Airport is connected I cannot access Adelphia from Safari (but can access Gmail and .Mac).
WHAT SHOULD I DO NEXT???: 1) Should I reset the Airport to its original factory settings and reinstall?. 2) Should I clear out the cookies?. 3) Since these are all related to various mail accounts (Gmail, .Mac, and Adelphia) is there something that could be done with the Apple Mail client???
Need your advice!
Mac G5 Mac OS X (10.3.9)

PLB11,
pretty complex indeed.
I would start by running Network Diagnostics with your standard configuration (i.e. the one with the Airport).
In the Apple menu, select System Preferences, Network, then click on the "Assist me..." button on the bottom. That should give you two options: "Diagnostics" and "Assistant".
Try Diagnostics first. If that doesn't solve your problem, run it again without the Airport. If the problem persists, run Assistant and set up a new configuration from scratch, using the original layout with the Airport.
Please post back the results. Good luck!

Similar Messages

HT4993 A CHINESE STUDENT REALLY NEED YOUR HELP!!

A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam，
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked ,it was excepted to be a global phone. But now I come across with some problems in China using local carrier, everything is working properly except sending text message, and iMessage and Facetime also seem not to work.This is very serious for Apple and me! Will I have the chance to fix this?
I tried all the possible solutions from the Internet, and the Official solution offered by Apple (http://support.apple.com/kb/TS4459), but it doesn't seem to work.
Will Apple help me with this issue? Please do.
Information of my iPhone:
SN: :F1*******8GJ
<Personal Information Edited by Host>

luyao49 wrote:
A CHINESE STUDENT REALLY NEED YOUR HELP!!
Dear Sir or Madam，
As I bought my iPhone 5 (16GB,White) in the USA from Sprint, full price with tax, unlocked
No such thing is sold from any authorized source in the US. The Sprint phone is not unlocked. It can be unlocked by Sprint for use on international (non US) carriers for current Sprint customers in good standing after completing (I believe) 60 days of service.
If you are having problems using certain features on an unsupported carrier, you'll have to work it out with your carrier.

Anybody who can help me? I really need your help

I've tried to execute J2ee tutorial examples.
I don't know why this sample didn't execute...I've already finished to set up J2EE and enviornment variables.
I was trying this part from j2ee tutorial titled as "Packing Web modules".
Whenever I type "asant create-war" to make web modules in command window. I always got error.
Packaging Web Modules(From J2ee tutorial for your information)
A web module must be packaged into a WAR in certain deployment scenarios and whenever you want to distribute the web module. You package a web module into a WAR using the Application Server deploytool utility, by executing the jar command in a directory laid out in the format of a web module, or by using the asant utility. This tutorial allows you to use use either the first or the third approach. To build the hello1 application, follow these steps:
In a terminal window, go to <INSTALL>/j2eetutorial14/examples/web/hello1/.
Run asant build. This target will spawn any necessary compilations and will copy files to the <INSTALL>/j2eetutorial14/examples/web/hello1/build/ directory.
To package the application into a WAR named hello1.war using asant, use the following command:
asant create-war
This command uses web.xml and sun-web.xml files in the <INSTALL>/j2eetutorial14/examples/web/hello1 directory.
To learn how to configure this web application, package the application using deploytool by following these steps:
Start deploytool.
Create a web application called hello1 by running the New Web Component wizard. Select FileNewWeb Component.
In the New Web Component wizard:
Select the Create New Stand-Alone WAR Module radio button.
In the WAR File field, enter <INSTALL>/j2eetutorial14/examples/web/hello1/hello1.war. The WAR Display Name field will show hello1.
In the Context Root field, enter /hello1.
Click Edit Contents to add the content files.
In the Edit Contents dialog box, navigate to <INSTALL>/j2eetutorial14/examples/web/hello1/build/. Select duke.waving.gif, index.jsp, and response.jsp and click Add. Click OK.
Click Next.
Select the No Component radio button and click Next.
Click Finish.
Select FileSave.
A sample hello1.war is provided in <INSTALL>/j2eetutorial14/examples/web/provided-wars/. To open this WAR with deploytool, follow these steps:
Select FileOpen.
Navigate to the provided-wars directory.
Select the WAR.
Click Open Module.
I guess this step is for checking my system about setup information. I not sure how to change it.
the result from execution of ansnt command in dos
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>asant create- war Buildfile: build.xml
j2ee-home-test:
BUILD FAILED D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\common\targets.xml:10: T he j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/c ommon/build.properties.
Set the j2ee.home property to the location of your Application Server installati on.
On Windows, you must escape any backslashes in the j2ee.home property with anoth er backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to:
Total time: 0 seconds
D:\J2ee\j2ee-1_4-doc-tutorial_7\j2eetutorial14\examples\web\hello1>
I've installed J2ee sdk in C:\Sun\AppServer
PATH: %J2EE_HOME%\bin;%JAVA_HOME%\bin;
CLASSPATH: %J2EE_HOME%\lib\j2ee.jar;C:\Java\jre1.6.0_05\lib\ext\QTJava.zip;C:\oraclexe\app\oracle\product\10.2.0\server\jdbc\lib\ojdbc14.jar
J2EE_HOME: C:\Sun\AppServer
JAVA_HOME: C:\Sun\AppServer\jdk
I've installed J2ee with administration 4848, HTTP: 8089 HTTP: 8090
I guess this could refer the target.xml and build.properties. So, I've tried after changing some value, which is fit for my setup.
but, still doesn't work.
targets.xml
<path id="classpath">
<fileset dir="${j2ee.home}/lib">
<include name="j2ee.jar"/>
</fileset>
</path>
<target name="j2ee-home-test" >

<available file="${j2ee.home}/lib/j2ee.jar" type="file" property="j2ee.jar.present" />
<fail unless="j2ee.jar.present">
The j2ee.home property is not properly set in <INSTALL>/j2eetutorial14/examples/common/build.properties.
Set the j2ee.home property to the location of your Application Server installation.
On Windows, you must escape any backslashes in the j2ee.home property with another backslash or use forward slashes as a path separator. So, if your Application Server installation is C:\Sun\AppServer, you must set j2ee.home as follows:
j2ee.home = C:\\Sun\\AppServer
or
j2ee.home=C:/Sun/AppServer
j2ee.home is currently set to: ${j2ee.home}
</fail>
</target>
<target name="clean" >
<delete dir="${build}" />
<delete dir="${dist}" />
<delete dir="${assemble}" />
<delete file="${ear.name}" />
<delete file="${war.name}" />
<delete file="${war.file}" />
<delete file="${client.jar.name}" />
</target>
<path id="db.classpath">
<fileset dir="${db.root}/lib">
<include name="*.jar"/>
</fileset>
</path>
<target name="create-db_common"
depends="init,start-db,delete-db"
description="Create database tables and populate database." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="abort" >
<transaction src="${sql.script}"/>
</sql>
</target>
<target name="delete-db"
description="Deletes the database tables." >
<sql driver="${db.driver}"
url="${db.url}"
userid="${db.user}"
password="${db.password}"
classpathref="db.classpath"
delimiter="${db.delimiter}"
autocommit="false"
onerror="continue" >
<transaction src="${delete.sql.script}"/>
</sql>
</target>
<target name="ping-db"
description="Checks to see if Derby is running." >
<java classname="org.apache.derby.drda.NetworkServerControl"
fork="yes"
resultproperty="db.ping.result">
<jvmarg line="${db.jvmargs}" />
<arg line="ping" />
<classpath refid="db.classpath" />
</java>
<condition property="db.running">
<equals arg1="${db.ping.result}" arg2="0" />
</condition>
</target>
<target name="start-db"
unless="db.running"
description="Starts the Derby databse server."
depends="ping-db">
<sun-appserv-admin
explicitcommand="start-database" />
</target>
<target name="stop-db"
description="Stops the Derby database server."
depends="ping-db"
if="db.running">
<sun-appserv-admin
explicitcommand="stop-database" />
</target>
<target name="admin_command_common">
<echo message="Doing admin task ${admin.command}"/>
<sun-appserv-admin
command="${admin.command}"
user="${admin.user}"
passwordfile="${admin.password.file}"
host="${admin.host}"
port="${admin.port}"
asinstalldir="${j2ee.home}" />
</target>
<target name="create-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="create-jdbc-resource
--connectionpoolid ${conpool.name} ${jdbc.resource.name}" />
</antcall>
</target>
<target name="delete-jdbc-resource_common">
<antcall target="admin_command_common">
<param name="admin.command"
value="delete-jdbc-resource ${jdbc.resource.name}" />
</antcall>
</target>
<target name="deploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="deploy ${war.file}" />
</antcall>
</target>
<target name="undeploy-war">
<antcall target="admin_command_common">
<param name="admin.command"
value="undeploy ${example}" />
</antcall>
</target>
<property environment="env" />
<target name="listprops"
description="Displays values of some of the properties of this build file">
<property file="../../common/admin-password.txt" />
<echo message="Path information" />
<echo message="j2ee.home = ${j2ee.home}" />
<echo message="j2ee.tutorial.home = ${j2ee.tutorial.home}" />
<echo message="env.Path = ${env.Path}" />
<echo message="env.PATH = ${env.PATH}" />
<echo message="" />
<echo message="Classpath information" />
<echo message="classpath = ${env.CLASSPATH}" />
<echo message="" />
<echo message="Admin information" />
<echo message="admin.password = ${AS_ADMIN_PASSWORD}" />
<echo message="admin.password.file = ${admin.password.file}" />
<echo message="admin.host = ${admin.host}" />
<echo message="admin.user = ${admin.user}" />
<echo message="admin.port = ${admin.port}" />
<echo message="https.port = ${https.port}" />
<echo message="" />
<echo message="Domain information" />
<echo message="domain.resources = ${domain.resources}" />
<echo message="domain.resources.port = ${domain.resources.port}" />
<echo message="" />
<echo message="Database information" />
<echo message="db.root = ${db.root}" />
<echo message="db.driver = ${db.driver}" />
<echo message="db.host = ${db.host}" />
<echo message="db.port = ${db.port}" />
<echo message="db.sid = ${db.sid}" />
<echo message="db.url = ${db.url}" />
<echo message="db.user = ${db.user}" />
<echo message="db.pwd = ${db.pwd}" />
<echo message="url.prop = ${url.prop}" />
<echo message="ds.class = ${ds.class}" />
<echo message="db.jvmargs = ${db.jvmargs}" />
</target>
build.properties ��
j2ee.home=
j2ee.tutorial.home=
asinstall.dir=${j2ee.home}
admin.password.file=${j2ee.tutorial.home}/examples/common/admin-password.txt
admin.host=localhost
admin.user=admin
admin.port=4848
https.port=8181
domain.resources="domain.resources"
domain.resources.port=8080
# Derby configuration settings
db.delimiter=;
db.root=${j2ee.home}/derby
db.driver=org.apache.derby.jdbc.ClientDriver
db.datasource=org.apache.derby.jdbc.ClientDataSource
db.host=localhost
db.port=1527
db.sid=sun-appserv-samples
db.url=jdbc:derby://${db.host}:${db.port}/${db.sid};create=true;
db.user=APP
db.pwd=APP
db.jvmargs=-ms16m -mx32m
Is there anyone who can tell me how to change it? I really need your help....
Thank you in advance.

ok,
First of all make sure your tutorial folder is installed from the root:
C:\javaeetutorial5
or
D:\javaeetutorial5
it makes things so simple.
Secondly:
set your jee tutorial home
JAVAEE.TUTORIAL.HOME =
C:/javaeetutorial5
Thirdly: check in:
C:\javaeetutorial5\examples\bp-project
make a copy of the build.properties.sample save it as build.propropties, as a property file,
edit the properties file as in:
build.properties
As follows:
# uncomment the property javaee.home, and add the path
# to your GlassFish Java EE 5 SDK installation
javaee.home=c:/Sun/SDK
javaee.tutorial.home=c:/javaeetutorial5
# Uncomment the property j2ee.server.username,
# and replace the administrator username of the app-server
javaee.server.username=admin
# Uncomment the property j2ee.server.passwordfile,
# and replace the following line to point to a file that
# contains the admin password for your app-server.
# The file should contain the password in the following line:
AS_ADMIN_PASSWORD=admin1234and so fourth. Some of the settings as the application server name is all done for you
and then test it again.
Take care of editing the property file. It can give you headache.
Note also that this is for application server 9.1 - JEE5.
eve

Need your advice on making family videos without losing quality

I need your advice. I don't know where to put my question because I don't know which piece of software I need (so I am posting this in a few places on the forum: sorry). That is exactly the question, I guess.
I have a couple of digital cameras that I use to make family videos. They both produce .avi files. Sometimes I use an iPhone that produces .mov files. So after my children and grandchildren visit, I end up with a bunch of these little videos. I want to combine them into longer videos that I can watch more conveniently on my Apple TV 2 or put on a DVD to send my kids or to my elderly mother-in-law to watch. I know how to combine them using iMovie HD, but that process seems to radically degrade the resolution and/or image quality. The original .avi files are 1024x768 and are very clear and sharp. I can't watch these .avi files on my ATV2 so I've been using Quicktime Player 10.0 to open them and then save them as .mov files. Once I import these files into iTunes, I can watch them on my ATV2 and they too look great on my tv (since they have the same resolution as the original .avi files): sharp and clear. But after I use iMovie HD to combine them (the .avi files) into an .m4v file, they're down to 640x480, and don't look near as good. And the DVD made from this file using iDVD looks equally bad and blocky.
I think what I want to know is, can I change some parameters on iMovie HD to produce files that are as high quality as the original .avi and .mov files? Or if not, what software do I need to accomplish this? I'm not interested in "fancy" movies. These are just home movies, but they are important to us. Should I upgrade my iMovie to do this? Or get Quicktime Pro? Or what? I'd appreciate your advice. I'd like to keep the process as simple as possible.

This is my workflow. I'm sure you will get a variety of opinions, but all I can say for my AVI clips, I've had excellent results for viewing on AppleTV.
I use iMovie HD 6 for organizing the clips into short movies, 15 minutes +/-. Clips are imported into iMovie as DV files. Once the movies are completed, I Export from iMovie as Full Quality, which results in a my-movie.dv file.
I then open the dv file in MPEG Streamclip. There I use the MP4 and iTunes settings for screen ratio and bit rate. 4:3 for Standard Def and 16:9 for High Def. Sounds complicated, but once you open MPEG Streamclip, the settings are simple to figure out.
The main thing to remember about quality is not to upscale your video. If the resolution is 640x480 SD, do not export higher than 640x480.
Here are a couple of screenshots using MPEG Streamclips "Export to MP4" setting:

Plan on going to Manila for vacation and going to bring my iPad 4. Need your advice what to do.

Plan on going to Manila for vacation and going to bring my iPad 4. Need your advice what to do.

Hello Aongtan051,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
About Apple World Travel Adapter Kit
http://support.apple.com/kb/HT4341
The World Travel Adapter Kit includes a USB power adapter, a 30-pin to USB cable, and a set of six AC plugs with prongs that fit different electrical outlets around the world. For world travelers, this is the perfect kit to ensure power connectivity in most countries you may travel to.
Best of luck,
Mario

I just brought an iphone 4 16gb off Ebay and everytime i insert my sim it doesnt allow me to activate any further i really need your help?

i just brought an iphone 4 16gb off Ebay and everytime i insert my sim it doesnt allow me to activate any further i really need your help?

applelogo wrote:
...Please insert another SIM card from a supported carrier or request that this iPhone be unlocked by your carrier. ...
You need to Contact the Carrier that it is locked to...
Also see this discussion.
https://discussions.apple.com/message/21189708

Hi all! I need to buy iPad tomorrow. Need your advice which iPad to buy? For almost the same money I can buy iPad 2 3g or iPad 4 wireless only. Both of them are 16gb and price difference is 70€ for iPad 4

Hi all! I need to buy iPad tomorrow. Need your advice which iPad to buy? For almost the same money I can buy iPad 2 + 3g or iPad 4 wireless only. Both of them are 16gb and price difference is 70€ for iPad 4

16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
How much content will fit on my iPod or iPhone?
http://support.apple.com/kb/HT1867
iPad Mini vs. iPad 2 vs. iPad 4: Which iPad Should You Buy?
http://www.padgadget.com/2012/10/25/ipad-mini-vs-ipad-2-vs-ipad-4-which-ipad-sho uld-you-buy/
 Cheers, Tom

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

Hi. I am reinstalling Macbook Pro OS X from the "question mark icon". During process, there is a question "select the disk where to install Mac OS X" but there is no option/selection in the box. I really need your help guys. I need it badly. :'(

If you got the question mark and you do not see any partition to install OS X to, it is not good.
Close the OS X installer by pressing the red button at the top left corner of the Install OS X window, and open Disk Utility. Then, look at the left sidebar and tell me if you see your hard drive. You should see something like this:
Do not worry if you do not see Macintosh HD or if the option with an arrow shows a different name. This is normal.
If you see it, choose it, go to the Erase tab and erase the drive. Finally, close Disk Utility and reinstall OS X. You will lose everything if you do not have a backup.
If you do not see the drive, it is damaged and it has to be replaced. You can replace the hard drive of a MacBook Pro without voiding the warranty, and any 2'5" SATA hard drive is valid. If you are not an experienced user or you do not want to go inside the MacBook, take it to an Apple Store or reseller.

HT4946 Hi. i downloaded the last version osf ios7, but i skipped the part where i was supposed to sing in to iCloud, now i'm trying to restart my iphone and i can't,,, i don't know what to do i really need your help!!!

Hi. i downloaded the last version osf ios7, but i skipped the part where i was supposed to sing in to iCloud, now i'm trying to restart my iphone and i can't,,, i don't know what to do i really need your help!!!

Just go into settings>Icloud> then sign in there.

When making a circle, illustrator automaticly makes lots and lots of more circles... How to resolve this problem? Really need quick advice!!

Hi there,
I have used illustrator now for a long period of time. Recently I purchased Adobe CC. Had no problems with it untill now.
It's like this. Whenever I try to make a circle (or, square, line or other forms) Illustrator makes lots and lots of more circles within it.
From the moment I click on the page untill I release my mouse, it keeps making circles. (see enclosed picture)
I have really no idea whatsoever how to undo this. I have used Illiustrator CC before for another project, and it worked fine. Now however, it doesn't.
Can anyone help me out here? I have payed projects to deliver, and I really need this to work really soon...
Thnx for your help!
btw, I work on a PC with Windows 8. (don't really think it's relevant, but still..)

Thnx!
I didn't know that could cause it. Which is actually weird since I've recently bought a new laptop. >,<U
Thnx for your help!

Zen microphoto help!! please i really need your h

hello everybody, i bought a zen microphoto 4GB in June and it worked perfectly until two days ago. I turned it on like i do everyday to listen to music on my way to school. i downloaded the newest version of firmware onto it'sthree days before. when i turned it on, it went into recovery mode. so i went to reboot, and it goes back into recovery mode. i tried about 3 times, then it disabled all the functions. i couldn't control anything. so i took out the battery, and left it until i came home. i come home, put in the battery, turn it on. i plug it in the computer, and the computer does not reconize that its docked and the screen goes white and then it shuts off by itself. then it just freezes, it refuses to turn on. i tell my friend today at school and he said the hard dri've crashed and now i have a brick the size of a zen microphoto. is this true, or?is something else wrong with it. please someone help if you can. Creative Zen MicroPhoto 4GBfirmware dowloaded 3 days before--ZENMicroPhoto_PCFW_6__30_04.exepurchased- June 0, 2006 with product replacement plan from best buyproblems started occuring November 7, 2006Message Edited by barylakamil on -09-200603:22 PM

one method i saw and tried worked well but you need to try it at your own risk!!! turn off your microphoto, grab your microphoto with the screen facing you, and either slap your hand against the SIDE of your microphoto, or slap the SIDE of your microphoto against your hand. This method works for me but try it at your own risk. it could damage your hard disk. (its probably already damaged anyways.)and if you really need to turn off your Zen but it wont turn off, i suggest removing the battery.
Message Edited by gmail on -09-200605:34 PM

RSS Bug getting closer to a fix... I really need your help!! Please?

Background: Cannot get SUBSCRIBE button to shoot me into iTunes/podcasts like it did before in v06.
Situation: (iWeb08) and http://www.threeboysproductions.com is a godaddy domain buy. http://web.mac.com/captmench is the actual address.
LONG AND SHORT: I really need to get rid of the www.threeboysetc from anywhere in iWeb but I can't seem to find a way.
Here's why:
Clicking on SUBSCRIBE from my Zachary's Film page generates this address:
http://www.threeboysproductions.com/Site/Zachary_Films/rss.xml
which, if you click on it you'll get the homepage. Why? Not sure but anything past the www.threeboyspetc/ just sends you to the homepage.
so
change www.tbp.com to actual title and you get a nice RSS feed:
http://web.mac.com/captmench/Site/Zachary_Films/rss.xml
HOWEVER --
Take any of those feeds and you'll get the main page again because they all say www.threeboysproductions.com.
For Example this from the RSS feed:
http://www.threeboysproductions.com/Site/ZacharyFilms/Entries/2007/8/25_FirstDinner.html
Sends you back to homepage
change it from www.threeboysproductions... and:
http://web.mac.com/captmench/Site/ZacharyFilms/Entries/2007/8/25_FirstDinner.html
It works fine!!
The xml file generated by iWeb confirms this:
<?xml version="1.0" encoding="UTF-8"?>
<rss xmlns:itunes="http://www.itunes.com/dtds/podcast-1.0.dtd" xmlns:iweb="http://www.apple.com/iweb" version="2.0">
<channel>
<title>Filming Zachary</title>
<link>http://www.threeboysproductions.com/Site/ZacharyFilms/ZacharyFilms.html</link>
<description>Zachary’s never known any other camera but the DVX... so I’ve been able to get some very nice stuff of him all along.</description>
<generator>iWeb 2.0.1</generator>
<ttl>60</ttl>
<itunes:explicit>no</itunes:explicit>
<itunes:author>ThreeBoys Productions</itunes:author>
<itunes:owner>
<itunes:name>ThreeBoys Productions</itunes:name>
</itunes:owner>
AND --
<description><a href="http://www.threeboysproductions.com/Site/Media/ElmoShirt.mov"><img src="http://www.threeboysproductions.com/Site/ZacharyFilms/Media/ElmoShirt1.png" style="float:left; padding-right:10px; padding-bottom:10px; width:192px; height:108px;"/></a>Zachary’s grandmother sent him an Elmo shirt... This is what happened when he opened it up.</description>
<enclosure url="http://www.threeboysproductions.com/Site/Media/ElmoShirt.mov" length="26452526" type="video/quicktime"/>
<itunes:explicit>no</itunes:explicit>
<itunes:duration>00:04:18</itunes:duration>
Please help me get this squared away.
Thanks,
CaptM

Ok... part of this might have come from the migration to 08. I had to trash my old site and rebuilt from ground up (using the same dirt, I think) and maybe I ended up keeping some of the old information.
look at the forward link:
http://web.mac.com/captmench/iWeb/Site/ThreeBoys.html/Site/Zachary_Films/rss.xml
The part iWeb/Site/ThreeBoys.html must be from your old version , so you may want to look at your forward config at your domain host.
You may want to talk to your domain host, because the forward frame is generated by them.

Guys i really need your help, i upated my ipad to io6 but it suddenly shut down and till now it is not working. please any kind heart who will help me would be very much appreciated. thanks

please someone help me regarding my ipad, i updated it to io6 but suddenly it shut down and till today i cannot use it nor turn it on, everytime i turn it on an apple logo only appears on the screen and nothing happens, please i really need a help here thanks

Have you the iPad User Guide? If not, download it from the link under manuals at the start of this forum an tke time to give it a cursory read at the very least.
Also, there is no point in awarding yourself the 'This solved my question' (or indeed 'This helped me') tags since, as you can see, the questioner cannot get any points. (Pardon the pun.) You can learn more about this at
https://discussions.apple.com/static/apple/tutorial/mark.html

Weird Hardware Issues - Need Your Advice

Hello.
I'm having this weird issue lately, and I was wondering if anyone can help.
First, I have a Pentium 4 3.2Ghz HT Presscot CPU, 512 MB RAM and an nVidia GeForce FX5200.
The problem:
I often leave my machine on overnight. When I wake up and get to the machine, I can see that X is using 50% CPU. When I move the mouse, I can see that it reacts very slowly to mouse-over effects. Then when I click a window, or try to access the keyboard, X pretty much freezes, and it loses touch with both the mouse and the keyboard. The only resort is to press the Reset button.
When I do so, my machine does not really reset - It gets stuck even before the BIOS screen comes up.
What I do then is I need to shutdown the computer, wait for a few minutes and turn it back on. When I turn it back on and it actually start working, I get a message from my BIOS, stating that some "overclocking failed". It then asks me to either load the default BIOS settings or to reconfigure the BIOS myself. When I choose the load the default settings, it carries on to GRUB and it's all good.
The cause (what I think, that is):
I think the cause for this is the CPU. My CPU runs at very high temperatures, for some reason. Now my computer is idle, and according to lm_sensors it runs at 68C now. When I came to the machine this morning, lm_sensors showed it was running at 81C.
The thing is I am pretty clueless as far as hardware is concerned. Can that be the reason for it all? What causes X to suddenly go berzerk with its CPU usage?
Any ideas and suggestions would be welcome, as I am pretty clueless.
Thanks a lot for reading

run "ps aux" command will tell you everything that is running
also
open the case make sure all fans are spinning
clean all dust & pet hair if you have a pet
i dont have a pet but i do clean the inside of my box like once a year or more
remove fan housing from heatsink on processor clean all dust between fins
if you dont have one or do consider putting another case fan in there
at one end machine blowing out the other end blowing in to circulate frsh air into box
does your pc sit inside a cabinet? maybe a wood desk cabinet, wood absorbs heat
while the inside of your pc circultes air if inside a cabinet with the same air trapped inside
the pc is only circulating the same air this is only one possibility for your issues but its the 1st place id look
for heat issues
& from what your telling me
81 degree Celsius = 177.8 degree Fahrenheit
i think 212 degrees is boiling , you could damn near cook your meals in a machine that hot
i leave my pc on almost always i have not turned it off in some time & im running
30 degree Celsius = 86 degree Fahrenheit

Safari Peformance Problems - Need Your Advice

Lately my Safari browser has been performing strangely. Often the blue bar that sweeps across the "http" window at the top of the Safari page does not complete its sweep and locks up. Also, I am noticing statements at the bottom of the Safari page saying things like ".......completed 184 out of 191 items",
What is going on here? Do I need to make any changes to Safari? Are these symptoms possibly the result of the web pages that Safari is trying to load having instructions that Safari is not equipped to follow?

Bee,
Thanks for the quick response.
No, I do not have any of the special type software that you enumerate.
Some details on how safari is performing:
1) A good example of what I mentioned in my first note is the behavior when I contact www.cnn.com. The blue bar that sweeps across the top of the page does not complete its sweep and I get a message at the bottom of the page such as ".....completed 93 of 184 items". I then halt the browser. The web page is useable, but evidently parts of it were never completed.
2) Sometimes I simply cannot access a web page. For example I just tried to access http://groups-beta.google.com/group/comp.sys.mac.comm/topics and the browser basically locked up and got nowhere.
3) In another case I can access a web page, but once on the page I cannot get icon driven commands to function. For example, I can contact the Adelphia home page (www.adelphia.net), but on that page are icon driven commands to access my eMail and a support chat room. Neither of these commands work. The browser again locks up. This is most vexing because Adelphia is my new ISP.
Note 1: These problems do not occur with all web pages. I can access many web pages such as amazon.com without any such problems.
Note 2: None of these problems occur when I access the net directly through a modem using my PowerBook.
For me, this is all most confusing.
Your thoughts?

Weird Access Problems - Really Need Your Advice

Similar Messages

Maybe you are looking for