Weird acting of Socket class while build for iOS device

Hello,
It's kind of weird and frustrating using Socket class to build package for iOS device (iPad in my case) - I do have the certificates files (P12, Provisioning) and I can build a package from FB4.5.1 too, but if I build the package as 'Fast' mode through 'Run Configuration' wizard the Socket works okay, but if I package with 'Standard' mode it never works - even I tested both the modes in same device! Any suggestions/idea - I couldn't able figure out why it's acting strange in different modes!
Thank you.

This is still become ridiculous - I've read in a document online that non-working socket has bug-fix with AIR 2.7, I was using 2.6 previously - so I downloaded the latest AIR 3.0 SDK and rebuild the project - yet its not working! This is ridiculous!

Similar Messages

Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP

Getting the error " [java] Problem invoking WLST - java.lang.RuntimeException: Could not find the OffLine WLST class " while building the O2A 2.1.0 PIP. I am using the Design Studio 4.3.2 for building the O2A 2.1.0 PIP. Please let me know how to resolve this issue. Here I am enclosing the log file .

We have basically the same issue when we try to create the interpreter using the embedded method..
I was able to use the interpreter embedded in a java client as long as the weblogic jars were located in a weblogic install if I tried to use them from a maven repository no luck at all...
All of this worked easily in 9.2 now in 10.3 it seems more error prone and less documented.
I have seen close to a 100 posts on issues related to this so is there a document which outlines specifics....
We / I have used weblogic now for almost 10 years and moving from 8.1 to 9.2 was painful and we expected the move from 9.2 to 10.3 not to be soo bad but its proving to be as painful if not more painful than moving to 9.2. We seem to spend a good bit of our time working around issues in the next new release that were not in the previous one..
Any help would be appreciated I think we will open a support case but even that is more painful...
Any help would be greatly appreciated..
PS: We confirmed that all jars in the startweblogic classpath were in the startup. The server we have the embedded wlst instance is a managed server and we are using the component in a war... Are there any restrictions which we are unaware of.
Error we get is
1 [ERROR] com.tfn.autex.order.weblogic.QueueMaintenanceUtility.addQueue():217 Error Adding Queue wowsers JNDI Name wowsers Exception: Invocation Target exception while getting the WLSTOffLineScript path

Error coming while installing Berkeley database for IOS Device.

Hi I want to install berkeley db in my MAC. My Xcode version is 4.5.2. I downloaded db-5.3.21(Berkeley) from oracle site.I installed command line tool for xcode. I installed berkeley db in my MAC for iPhoneSimulator. Where as for iPhone device I am unable to install. I am following below link for installing the berkeley db. http://docs.oracle.com/cd/E17076_02/html/installation/build_unix_iphone.html
When I am installing berkeley db for IOS device it is showing following error.
checking for arm-apple-darwin11.4.2-sh... no checking for sh... /bin/sh checking for a BSD-compatible install... /usr/bin/install -c checking for arm-apple-darwin11.4.2-cc... /Applications/Xcode.app/Contents/Developer/Platforms/iPhoneSimulator.platform/Developer/usr/bin/gcc checking whether the C compiler works... no configure: error: in /Users/celstra/rajaramesh/db-5.3.21/build_unix': configure: error: C compiler cannot create executables See config.log' for more details
............................... The error is telling that C compiler cannot create executables... But for iPhonesimulator it is not showing the error...
Steps performed for installing Berkeley database for IOS device.
export DEV_iOS=/Developer/Platforms/iPhoneOS.platform/Developer
export SDK_iOS=${DEV_iOS}/SDKs/iPhoneOS6.0.sdk
export COMPILER_iOS=${DEV_iOS}/usr/bin
export CC=${COMPILER_iOS}/gcc
export CXX=${COMPILER_iOS}/g++
export CFLAGS="-arch armv6 -pipe -Os -gdwarf-2\
-no-cpp-precomp -mthumb -isysroot $SDKROOT "
export CXXFLAGS="-arch armv6 -pipe -Os -gdwarf-2\
-no-cpp-precomp -mthumb -isysroot $SDKROOT "
export CFLAGS=${LDFLAGS}
export CXXFLAGS=${LDFLAGS}
//export CPP=”/usr/bin/cpp ${CPPFLAGS}”
export LD=${COMPILER_iOS}/ld
export AR=${COMPILER_iOS}/ar
export AS=${COMPILER_iOS}/as
export NM=${COMPILER_iOS}/nm
export RANLIB=${COMPILER_iOS}/ranlib
../dist/configure --host=arm-apple-darwin9\
--prefix=$SDKROOT ...
Same steps i performed for iPHONESIMULATOR. But at that time c complier works fine. But while i am try to install for IOS device it is showing above error.
Can we need any license software for this installation. Could any one please provide exact document regarding installation for IOS device.
Any advice would be appreciated.
Edited by: 1000547 on Apr 17, 2013 12:58 AM
Edited by: 1000547 on Apr 17, 2013 1:03 AM
Edited by: 1000547 on Apr 17, 2013 2:31 AM

Thanks for the reply komal i did that but not cleared..one thing when i create the build from my flash builder the error happens.but the same project i used in another flashbuilder and create build..That build works fine...is there any chance for flash builder compiler problem.
cheers,
venkat

Flex 4.5 build for ios

HI,
Right at the beginning of my flex journey and so I'm using examples to see how stuff is done.
I have done the recent adobe flash builder update and can make simple flex builds for ios, google android and blackberry. Cool.
I have sourced a demo flex 4.5 project that was done for android (I think before the update) but when I go to do a build for ios
the option on the drop down is not there (just has google, no ios or blackberry) So I guess the project thinks its in pre-update mode
So the question is, what is causing the drop down to only have google, is there some library/framework/script I need to add or something
so this demo flex project that was writen for android can be tested on ios.
hope this makes sense!
thanks
mike

OK
I found it project>properties add a device
KBn

File.upload on Air SDK for iOS devices failed to send http request to server.

I am trying to use ActionScript's File.upload to upload a file on Air SDK for iOS8 environment, but the File.upload does not work properly. No handler about the file upload is executed after File.upload is invoked, and no exception is caught. When I check the network traffic of the server side, I found that no http request even hit the server after File.upload is executed. The code snippet here is very simple.
private var file:File;
private var dir:File;
//This method is executed to create a file and upload it when the Upload Button is pressed.
protected function OnUploadButtonPressed(event:MouseEvent):void{
var str:String = 'This is test';
var imageBytes:ByteArray = new ByteArray();
for ( var i:int = 0; i < str.length; i++ ) {
imageBytes.writeByte( str.charCodeAt(i) );
try{
dir = File.applicationStorageDirectory
var now:Date = new Date();
var filename:String = "test" + now.seconds + now.milliseconds + ".txt";
file = dir.resolvePath( filename );
var stream:FileStream = new FileStream();
stream.open( file, FileMode.WRITE );
stream.writeBytes( imageBytes );
stream.close();
file.addEventListener( Event.COMPLETE, uploadComplete );
file.addEventListener( IOErrorEvent.IO_ERROR, ioError );
file.addEventListener( SecurityErrorEvent.SECURITY_ERROR, securityError );
file.addEventListener(ErrorEvent.ERROR, someError);
file.addEventListener(ProgressEvent.PROGRESS, onProgress);
file.upload( new URLRequest("http://10.60.99.31/MyPath/fileUploadTest.do"));//This line does not work. No handler is executed. No http request hit the server side.
} catch( e:Error ) {
trace( e );
//Complete Handler
private function uploadComplete( event:Event ):void
trace( "Upload successful." );
//IOError handler
private function ioError( error:IOErrorEvent ):void
trace( "Upload failed: " + error.text );
//SecurityError handler
private function securityError(error:SecurityErrorEvent):void{
trace( "Security error:" + error.text );
//Other handler
private function someError(error:ErrorEvent):void{
trace("some error" + error.text);
//Progress handler
private function onProgress(event:ProgressEvent):void{
trace("progressHandler");
When executed on Air Simulator, it works fine as expected, and the file is successfully uploaded to the server. But When executed on iOS devices(in my case, iPad), as I explain early, no handler about the file upload is executed, and no the http request even hit the server. So I think the problem may be in the client side. It seems that the Air SDK for iOS just failed to send the http request for some reason.
To make my problem more clear, I list my environment below:
Development Environment: Windows7 (64bit) / Mac os 10.9.4 (Tested on OS platforms.)
IDE: Flash Builder 4.7
Air SDK: 3.8 / 16.0.0 (After I updated to the lastest Air SDK 16.0.0 , the problem still exists.)
Application Server: Tomcat7 + Spring
Target OS: iOS 8
I have been struggling for this for days. So I really appreciate it if anyone has any idea about this.
Thanks in advance.

Hi bluewindice ,
As you have quoted ( ActionScript's File.upload does not work on Air SDK for iOS devices ) , this issue has been replicated at our end, and our team will be working on it.
Thanks,
Tushar

How to integrate flash media server 4.0 live streaming for iOS devices ?

Hi All,
I have website which has live streaming module its working fine, same module i want to integrate for iOS devices. For live video streaming we are using FMS 4.0. So please let me know how we can integrate this for iOS devices using flash media server 4.0.
Thanks in Adavnce
Mohammad Sharique

You need to place the crossdomain.xml in the webroot folder. Create a text file in the webroot folder using notepad, and call it crossdomain.xml. The text below will give you a wide open access policy, which is fine for testing.
<?xml version="1.0"?>
<!DOCTYPE cross-domain-policy SYSTEM "http://www.macromedia.com/xml/dtds/cross-domain-policy.dtd">
<cross-domain-policy>
<allow-access-from domain="*" />
</cross-domain-policy>
For debugging HTTP streaming I recommend you get hold of something like Charles or Fiddler. These will greatly assist in pinpointing any issues.

No,I recently buy an android device which is running ver 4.0 and has flash player.So please make Adobe Flash Player for IOS devices pls!pls .

No,I recently buy an android device which is running ver 4.0 and has flash player.So please make Adobe Flash Player for IOS devices pls!pls .

You need to contact the folks at the link below.
http://www.adobe.com/aboutadobe/contact.html

F4V player for iOS devices ?

Hi All, Is there any player to play .f4v file for iOS devices application. (We are using Flash Media Server 4.0). Thanks In Advance Mohammad Sharique

You need to contact the folks at the link below.
http://www.adobe.com/aboutadobe/contact.html

Lag When Programming For iOS Device With Adobe Flash Professional.

Hi, I'm trying to make an Application for iOS device, Everything is find, but when i installed it on my iphone 4 and my iPhone 4S my game start lagging, i don't what to do, i tried to simplifed the code but nothing is working i dont know if it's in the rendering or when i'm trying to export, but on my iPhone it's lagging.
Any Help Please, Solution ?
Thanks
Francis

Target gpu on the device you're testing .. you'll get much better results.
You can do it on the xml configuration file on <renderMode> or if you're publishing in flash on the settings of renderMode select GPU.
Also get rid as much as you can from vector graphics and use bitmaps instead.
You can use Adobe's method of converting a vector in bitmap like this : myMC.cacheAsBitmap = true;
And also if you're moving an object, scaling or changing it's transparency use myMC.cacheAsBitmapMatrix = new Matrix();
These are some basic optimization tips.

HT1338 Java for iOS devices

I am currently out of country and unable to log onto my personal email account via Comcast.net. It is requiring me to have JavaScript activated. But I have looked almost everywhere for a download for either my iPad or 4s iPhone runnning most current iOs. Is there a location to download or is it even available for iOs devices?

Java and Javascript are two very different things so don't confuse them.
If you're asking about Java there are mentions of it on the web but I've never tried to get it on the iPhone see How to Use Java on An iPhone
If you asking about Javascript then that is possible. Open settings on the iPhone go to Safari and make sure javascript is enabled see How to enable JavaScript on the iPhone

Design for iOS devices

I am a novice with web design but was able to make a fairly simple site that looks fine with Safari or Firefox on my desktop but on an IOS device the spacing and layout are all out of wack.
Is there a special way to design for IOS devices?
Thanks in advance

This particular forum was created to help those transitioning from Photoshop.com to Adobe Revel. Your question does not pertain to that topic.
We also have many other forums relating to other Adobe products at: http://forums.adobe.com

Phonegap integration. Building for Android device

hey all,
i'm trying to build an apk file for android device.
Easy with Dreamweaver yes.
Difficulty comes when you try to add some specific functionality : for instance you may want to post some stuff on the user 's facebook wall.
PhoneGap provides a plugin for that : https://github.com/davejohnson/phonegap-plugin-facebook-connect
But this plugin needs some addional stuff from the android SDK. It needs some java classes, namely the facebook android sdk : https://github.com/facebook/facebook-android-sdk
Has anybody any hint on how we could include that stuff in dreamweaver installation?
In my opinion we need to rebuild android.jar (not tried yet) but there may be another solution to tweak Dreamweaver. Or has anybody another solution to post on facebook/twitter from a native apk coming from a jquery/phonegap project under Dreamweaver?
thanks in advance for reactions/advices/...
Loic

I did that on a mac :-)
however it was a standard eclipse project. I had to include the correct JARS (facebook+phonegap) in the library path and everything was fine quite easily. I mean there was no additional SDK to install due to OSX.
What I remember too is this: there is no facebook app installed on the emulator. It means when you run your app on it and try to connect to facebook through phonegap, the browser will open and ask for authentication. On your device, if the FB app is installed a nice popup will open and ask for authentication and authorization (or just confirmation if you are already authenticated).
in conclusion there's no need to buy a mac for that. Be sure to check phonegap forum and post your problem. Phonegap releases have evolved a lot and they are quite responsive.
Loic

Flash builder mobile app hangs on Realease Build after air 3.1 (3.2 - 3.8) for IOS devices

The app stoped working after air 3.1 on IOS devices...Its is a Flex/actionscript mobile project...as of May 1st apple forced us to use newer sdk so i updated to air 3.8 and have tried every version since 3.1...the app only works perfectly in release build from air 3.1...on air 3.8 debug on device works perfectly non-debug run on device crashes with sigbus or sig 11 ...Ive used xcode console and device logs and they have not been helpful...since they reference post compiled native code which i dont have acces to i have tried every fix on the web. Ive been trying to figure this out for days..Does anyone have any insight on this issue.
Curently Using:
Flash Builder 4.7
air 3.8 beta
Compiler options:
-locale en_US
-swf-version=21
-omit-trace-statements=false
-keep-as3-metadata+=Inject

The app stoped working after air 3.1 on IOS devices...Its is a Flex/actionscript mobile project...as of May 1st apple forced us to use newer sdk so i updated to air 3.8 and have tried every version since 3.1...the app only works perfectly in release build from air 3.1...on air 3.8 debug on device works perfectly non-debug run on device crashes with sigbus or sig 11 ...Ive used xcode console and device logs and they have not been helpful...since they reference post compiled native code which i dont have acces to i have tried every fix on the web. Ive been trying to figure this out for days..Does anyone have any insight on this issue.
Curently Using:
Flash Builder 4.7
air 3.8 beta
Compiler options:
-locale en_US
-swf-version=21
-omit-trace-statements=false
-keep-as3-metadata+=Inject

Flash Professional CS5.5 crashes while publishing for iOS

Greetings,
I'm having the same problem as is detailed in the forum post below from March 8th:
http://forums.adobe.com/thread/972499
The problem is that Flash Professional CS5.5 crashes every time I try to publish my 'Hello World' project for iOS. The crash happens anytime I press the OK or Publish buttons while configuring the iOS Settings. This is the tutorial I am attempting to complete:
http://help.adobe.com/en_US/as3/iphone/WS789ea67d3e73a8b2-240138de1243a7725e7-7ffc.html
I sent a crash report to adobe, which I could duplicate if that helps.
Any help with this would be greatly appreciated
Thanks,
Jeremy

Hi,
There could be an issue with your latest Java Runtime Environment. Could you please uninstall your current JRE and try install a version prior to that?.
You can find a list of JRE updates here at http://www.filehippo.com/download_jre_32/history/
Thanks!
Mohan

Out of Memory Error when exporting release build for IOS

I recently changed my project to use the new AIR 3.3 SDK.
When I try to package my game for iOS, I get an error part way through the build, that says
Exeption in thread "main" java.lang.OutOfMemoryError: Java heap space.
I took a screenshot:
It's frustrating because now it doesn't build at all.
I have tried changing the -vmargs for the sdk to have 16Gb of RAM available, (and many other multiples of 1024m) in the hope that this would fix it.
I've also installed the JDK as it is supposed ot handle memory better than the JRE, but have no idea how to point FB to use that.
I've changed the Xmx value to 1024m in Flashbuilder.ini and eclipse.ini (it seems it doesn't start if it's higher than that) and still no luck.
Can anyone help with this?
Cheers,
Ben

Well I don't have to render as I go, it is just a choice. I checked to see if all the video and stills were rendered. I re-rendered after making sure all of the options were checked, removed all of the stills from the timeline just in case the still format was the problem, then attempted to export again. It took about 2 hours. I watched with activity monitor and it took almost all of the available disc space then my computer shut itself down. When I rebooted there was a Quicktime file 320 GB in size but would not open. I got an error message that it was not a mov. file.
But to answer your question:
Video is 29.97fps DV/DVCPRO
Frame size is 720 x 480
3.0 mb/sec
16 bit Integer
Aplha= None /ignore
Composit is Normal
NTSC-CCIR 601
Stereo
Stills are at 25.0 fps JPEG

Weird acting of Socket class while build for iOS device

Similar Messages

Maybe you are looking for