WEP Encryption Key not remembered when restarting the Equium M50-244

I am running an Equium M50-244 Laptop, with a BT Home Hub 7838 wireless router. Nearly everytime I power up this notebook it has no wireless connection. I therefore have to go into Control Panel, Network Connections, and get it to find a new connection.
Then have to type in WEP Encryption Key number twice to get a new connection.
This is obviously a lengthy procedure so I need to get the Laptop to recognise the Encryption Key and store it for the next time I power on.
I am running Windows XP Home with Service Pack 2, and a Norton Anti Virus and Firewall.
Any help would be much appreciated
Peter

Hello
I agree with Louis. Your WLAN cards support WPA encryption and, if possible, you should use it.
Anyway: for WLAN configuration try to use Windows settings and defined WEP password should be remembered for your WLAN. I have configured it on many different notebooks and after choosing the listed WLAN the password was already defined and only thing that must be done is to click on button Connect.

Similar Messages

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

When my Mac battery dies and I turn it back on, it always crashes on the grey screen with the progress bar, then it restarts (taking forever) and does not remember any of the programs I was running. MacBook Pro 13 inch running Mavericks

http://osxdaily.com/2014/10/17/os-x-yosemite-installation-stuck/
also use the Command-L to view logs during installation

HT204306 when I restart my ipod I appeared that I have to activate it , but I can not remember which is the email that is associated with my ipod

when I restart my ipod I appeared that I have to activate it , but I can not remember which is the email that is associated with my ipod and I can not use until you activate it and use all those who believed that they could be and I get not you can use this email

To address this at the Apple ID level, use Apple's iForgot service, or click here and contact Apple.
To address this at the device level, you need to be its original owner, and take the device and its purchase receipt to a physical Apple Store.
(125961)

I am getting a message Internal Error Instacast keys not defined when I open one of the local tv news apps on my iPad. What do I need to do to fix it?

I am getting an error message "Internal error Instacast Keys not defined" when I open a news app from one of my local tv stations. What is causing this?

Hello, MommaLloyd24.
Thank you for visiting Apple Support Communities.
Here are the steps I would recommend going through as they should resolve the issue.
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
Jason H.

Windows cannot connect to the printer the local print spooler service is not running please restart the spooler or restart the m

We have 7 computers on a local network 3 of them have local printers 2 and are brand new Vista equiped. we shared the local printers on the vista machines but they are unaccessable from one vista to the other... it works from an XP to a Vista, but not from a Vista to a Vista.... go figure.... When we try to add the printers, the error message that we get is: "windows cannot connect to the printer. the local print spooler service is not running. please restart the spooler or restart the machine."
I would appreciate any help...
Thank you

This worked for me. GP
Problem : error 1075 and Local print spooler service is not running.
problem description : I have a Lexmark x4270 all in one. I installed the driver for it in my new laptop running Vista. Turns out the driver is not for Vista but XP. I uninstalled the XP driver and downloaded a Vista driver from Lexmark. When I try to run the printer software I get a message "Local print spooler service is not running. Please restart the spooler or restart the machine." I tried all of that. I have looked this problem up on the web and it is quite common with Vista. Many of the "solutions" say it is a problem with an incomplete removal of the incorrect printer driver and they show how to correct in the registry. I am not comfortable tinkering with the registry and thought I'd consult with you first.
I tried "everything" I could to fix the problem of getting "error 1075" fixed in my HP laptop running Vista. HP came up with simple solution below. The regedit part is what fixed mine. I did not need the safe mode part. I think Lexmark should add the solution to your knowledge base.
==============================
From HP: Please perform the below given steps in safe mode to resolve the issue.
Reboot your notebook and press F8. The system will show some booting options select safe mode.
Note: Starting computer in safe mode may take some time.
Uninstall the printer using Programs and Features from the control panel of your notebook.
Uninstalling any software from Control Panel :
1. Click on Vista (start) button
2. Click on control panel
3. Double click on Programs and Features
4. Click on YOUR Lexmark Printer and click on remove.
Download and reinstall the printer software using the below given link :
http://downloads.lexmark.com/cgi-perl/downloads.cgi?ccs=229:1:0:438:0:0&searchLang=en&os_group=Windows%20Vista&target=
NOTE: Clicking the link may give an error indicating it is invalid.
Copy and paste the entire link in a new browser window.
After the installation of drivers, restart the notebook into normal mode. Now plese check with printing any document. If the still persists then perform the below given steps :
Click on Vista (Start) button, and type Regedit.exe in search bar
Navigate to the following branch
HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ Spooler
In the right-pane, double-click the DependOnService value
Delete the existing data, and then type RPCSS
Close Regedit.exe
Restart the computer.
This should resolve the issue.
For information on keeping your HP and Compaq products up and running, please visit our Web site at:
http://www.hp.com/go/totalcare

Firefox is slow or locks up on both my work PC and home iMac and is not resolved by restarting the program or restarting my computer.

This has been happening both at work on my PC and at home on my iMac. Pandora locks up. Videos lock up. Facebook won't load on my iMac under firefox. And it is not solved by restarting the program or the computer. I make sure to install all updates when requested. I am forced to use Chrome now! Oh the horror!

Please give some details; what computers systems, what Firefox version?
Does this happen on some web sites , many?
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences#advanced'''<Enter> in the address bar.
Under '''Advanced,''' Select '''General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

Transportation lane KEY not getting generated in the table

Transportation lane KEY not getting generated in the table
Hi folks,
The issue is like this :
We have a weekly workorders upload program from legacy systems to SAP-APO. The legacy planners send a .CSV file containing material-wise workroders. A customised zee program picks these quantities & writes them in Prod.planned keyfigures in SNP planning book. This process is done for the manufacturing locations only.
Lately workorders for two particular material M1 & M2 had failed to get upload. It gives the error 'NO VALID SOURCE OF SUPPLY COULD BE FOUND' in its Job log. We did some debugging & found that for successful materials the TRPID is getting generated in the table /SAPAPO/V_TRPROD whereas this TRPID is missing for M1 & M2. Why this is happening is our main concern. We tried deleting the PPM & creating this again, assuming that the PPMID is the precursor for generating this TRPID, but this yielded no results.
____ for successful upload______________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY of successfully loaded workorder
Enter
This gives the following results
TRPID = TRPID KEY
LOCFR = LOCID KEY for manufacturing location
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for successfully loaded workorder
( This seems a self-lane, i.e both TO & FROM location are same)
____ for unsuccessful upload________
se16 --> /SAPAPO/V_TRPROD
Version = 000
LOCTO = LOCID KEY for manufacturing location
MATID = MATID KEY for unsuccessfully loaded workorder
Enter
This gives the following results
Error = No Table entries found for specified KEYS
We are perplexed why this TRPID is not getting generated for these two particular material M1 & M2?
We have deleted their PPM & re-created them to cross-check if the PPMID KEY is the trigger for generating the TRPID key. This didn't work!
Please let us know in case someone faced a similar issue.
Many Thanks.
Kumar
Edited by: Blue Lotus on Jun 9, 2011 2:44 PM

Yes Anand.
We deleted the PPM & created it again, which didn't work.
Later on we deleted the product itself from APO & re-CIFed it from R3 & then re-created the PPM.
The PPMID which was missing earlier is now getting created! However no luck with the TRPID.
Why this TRPID is not getting generated in our only concern
Regards
Kumar

HT204053 How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

How can I delete my iCloud account which I do not remember anything about the information that I entered about 4 years ago. It always asks my birth date but it seems I did not enter my correct date how can I bypass this question???

You cannot delete the account from the server (partly to prevent the username from becoming available again and some-one else using it to pretend to be you).. Having disengaged your devices from it, go to http://icloud.com and delete any data in there such as contacts and calendars. Then just ignore it.

Im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active,and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??

im having trouble changing my security questions, they are from years ago so i do not remember them and the reset email is no longer active.., and i dont know how i can use the account because i added money to it but it asks for the questions. anybody help??
this says it all..

Welcome to the Apple Community.
Contact Apple through iTunes Store Support, and explain that you have forgotten your 3 security questions, that you can reset your password, but doing so doesn't reset your security questions.
Remember, support will receive hundreds, if not thousands of requests per day, some from people trying it on, others with little explanation and others that are written extremely poorly. Take the time to explain your situation properly, be precise and concise, brief but comprehensive.

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic? Is this possible?

How can i set songs within a playlist, or an entire playlist, so that they are not included when using the shuffle function on IPOD Classic?
Is this possible?

You can set any song to Skip when shuffling.
In your iTunes Library, highlight the song and right-click/Get Info. On the Options tab is the Skip when shuffling box. Select that and then Sync the iPod with your Library.

Finder not working, when click the infinity sigh comes, can't open any file

finder not working, when click the infinity sigh comes, can't open any file?

That could be an indication your drive is failing. If you do not have a current Backup, that is top priority.

RE: my input fields does not display when running the page

my input fields does not display when running the page
why is that so?

Hi,
Can you send the HTML code for us?
Afonso

Macbook pro not turning on after SMC reset. I have the following problem. Yesterday I noticed that my mbp 2011does not sleep when closing the screen. smc due loud fan and an X on battery symbol

Yesterday I noticed that my mbp 2011 dos not sleep when closing the screen cover. Today I Turner my laptop in. However the fan was working loudly and stayed loud. After Start I noticed an X on Battery symbol. Clicking on it, it showed 'no battery.' I found out that a potential solution for this problem was SMC reset. I also noticed that the leds on magsafe was not lightning. Despite this I tried to execute the smc reset as described on apple support site. Switching off, plugin the magsafe connector, pushed the buttons shift + alt+ ctrl + power. Then i pushed the power button, but my mbp is not turning on. I pushed several times on the power button but nothing works. The magsafe is also dark meaning the leds not lightning. Can anyone here help me on this ?

Problem solved by my own. But do not how :) magsafe again working and the laptop tooo

OK so i need to reset my security questions because i do not remember them,but the link that is given for my email is incorrect. i do not know how to change that?

OK so i need to reset my security questions because i do not remember them,but the link that is given for my email is incorrect. i do not know how to change that?

You need to ask Apple to reset your security questions; ways of contacting them include clicking here and picking a method for your country, phoning AppleCare and asking for the Account Security team, and filling out and submitting this form.
They wouldn't be security questions if they could be bypassed without Apple verifying your identity.
(103340)

HT201303 I cannot access my account as I do not remember any of the answers to the security questions??what shall i do??

Hi everyone, I cannot access my itunes account fully as I cannot answer the security questions as I do not remember any of the answers, there are 3 security questions and I need some advice on how to reset these questions as I have credit on my account which I need to use but cannot at the moment due to the security questions not being answered, please help..............................

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can try going to https://appleid.apple.com/ and click 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you might see an option to send security question reset info to your rescue email address.
If you don't have a rescue email address then see if the instructions on this user tip helps : https://discussions.apple.com/docs/DOC-4551

WEP Encryption Key not remembered when restarting the Equium M50-244

Similar Messages

Maybe you are looking for