WES 7 OSD standalone (works) vs bootable (fails) - Failed to find suitable device driver for device (help)

Hi everyone,
I'm trying to deploy a Windows Embedded Standard 7 (trial key at the moment) image in SCCM 2012 SP1 with a very simple task sequence.
I have a 'build and capture' and an OSD TS. I'm testing these on Hyper-V PCs and both work fine when i create stand alone media. The problem arrises when I try to deploy (or build & capture) with a bootable media;
The TS starts, formats the disk, applies the OS, Windows and network settings, Apply Device Drivers etc., but when it reboots into Windows
(or WES7 to be exact) it cant boot. The Windows Boot Manager reports a 0xc0000359 for storvsc.sys
And I can't figure out what's wrong. I will post the SMSTS log further down below. The SAME TS works fine when it's a stand alone media.
I have tried to:
- Apply the WIM manually (nothing wrong - boots fine)
- Create and apply driver package for the Hyper-V machines (from the MSI's Windows5.x-HyperVIntegrationServices-x86 and Windows5.x-HyperVIntegrationServices-x64)
- No dice
- Create a new boot image with the hyper-v drivers in it. No dice
- Google everything related I can think of.
I suspect it has something to do with the lines where it says:
"Failed to find a suitable device driver for device xxx”
It also has a couple of 401 errors when trying to get the packages, but it seems like it DOES end up getting the content.
Please help! What could it be?
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
I have 2 Hyper-V machines; one w. legacy network adapter - one not. Both have same issue.
SMSTS log key points are (the log is too long to post here):
401 - Authentication failure on request with anonymous access, retrying with context credentials.
OSDDriverClient
5/6/2014 4:03:41 PM     612 (0x0264)
401 - Authentication failure on request with context credentials, retrying with supplied credentials.
OSDDriverClient
5/6/2014 4:03:41 PM     612 (0x0264)
Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/s3cap.inf to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\s3cap.inf
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vmbusvideo.cat to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vmbusvideo.cat
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Downloaded file from http://<CUSTOMER DP REMOVED>:80/SMS_DP_SMSPKG$/56D13589-D906-4697-8A1E-1CC3211902AA/sccm?/vms3cap.sys to C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA\vms3cap.sys
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Download done setting progress bar to 100
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) VerifyContentHash: Hash algorithm is 32780
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Failed to open Software\Microsoft\Sms\Mobile Client\Software Distribution registry key. The client should not get checked for RWH OpLock Type
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Installing driver "Microsoft Emulated S3 Device Cap"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Adding "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to Windows driver store.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting %SystemRoot% to "C:\WINDOWS"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Getting namespace "Microsoft-Windows-PnpCustomizationsNonWinPE" for architecture "amd64"
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Added list item with key value '1'
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Writing configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Successfully saved configuration information to C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Setting temporary directory to 'C:\_SMSTaskSequence\PkgMgrTemp'.
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Calling Package manager to add drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:41 PM    612 (0x0264)
Command line for extension .exe is "%1" %*
OSDDriverClient
5/6/2014 4:03:41 PM
612 (0x0264) Set command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM    612 (0x0264)
Executing command line: "X:\windows\Pkgmgr\dism.exe" /image:"C:" /windir:"WINDOWS" /apply-unattend:"C:\_SMSTaskSequence\PkgMgrTemp\drivers.xml" /logpath:"C:\_SMSTaskSequence\PkgMgrTemp\dism.log"
OSDDriverClient
5/6/2014 4:03:41 PM    612 (0x0264)
Process completed with exit code 0
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Dism successfully added drivers to the offline driver store.
OSDDriverClient
5/6/2014 4:03:45 PM    612 (0x0264)
Successfully added "C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA" to the Windows driver store.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Successfully installed driver "Microsoft Emulated S3 Device Cap".
OSDDriverClient
5/6/2014 4:03:45 PM    612 (0x0264)
Entering ReleaseSource() for C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) reference count 1 for the source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA before releasing
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Released the resolved source C:\_SMSTaskSequence\ContentCache\56D13589-D906-4697-8A1E-1CC3211902AA
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{57164F39-9115-4E78-AB55-382F3BD5422D}\{FD149E91-82E0-4A7D-AFA6-2A4166CBD7C0}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0000)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Intel 82443BX Pentium(R) II Processor to PCI Bridge'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Generic Monitor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{A9A0F4E7-5A45-4D96-B827-8A841E8C03E6}\{242FF919-07DB-4180-9C2E-B86CB68C8C55}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Numeric data processor'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Ranking compatible drivers for VMBUS\{35FA2E29-EA23-4236-96AE-3A6EBACBA440}\{2450EE40-33BF-4FBD-892E-9FB06E9214CF}
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_8E607B402D9A9C9A0FBC0881F11231BDA52B4C8851F1BA00F7E8B3D932FC4871 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_54E81CFA62FCB88FCA9D60C01594AA5FCEE40F9D5B28F47DE2A7B70C91268F17 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) SCOPEID_4AA3EF76-E8E6-4FC3-8E79-00F39F7D1CB5/DRIVER_C01B80DA1C014302CC793357FF0F1C0486554D11_0E4046FEF6FF1BC7776A060DF1B19003E0B5640936488E08E61C41D47A8B26C2 (SMS Driver Rank = 0x0001)
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Driver "Hyper-V Heartbeat" has already been installed.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'Microsoft System Management BIOS Driver'.
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264) Failed to find a suitable device driver for device 'CD-ROM Drive'.
OSDDriverClient
5/6/2014 4:03:45 PM 612 (0x0264)
Exiting with return code 0x00000000
OSDDriverClient
5/6/2014 4:03:45 PM
612 (0x0264)
In advance: Sorry...

Hi,
0xc0000359 for storvsc.sys
Looks like Hyper-v Storage Controller driver issue.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

Hello, I am a user of the iPhone is not the place for bi çıkıcak turkey apple brand products and product support and equipment does not work as it used to fix and send back waiting for your help. Please support me in this regard quit

We are all iphone users just like you.
Do you have a question for fellow iphone users?

T440s windows 10 upgrade failed due to lack of Lenovo driver for ac-7260

Anyone know when or where Lenovo will release / has released a windows 10 compatible driver for the Intel Wireless ac-7260 wifi adapter (mine is in my T440S)? Currently it's not possible to upgrade because the wifi adapter fails to operate correctly and I can find no update from Lenovo for my notebook and the ac-7260 adapter on the site that supports windows 10. I also tried the Intel "generic" drivers but that failed to resolve the problem. I tried many things and just could not get it to work for many different reasons that all boiled down to the adapter driver failing to work and giving errors or simply not working at all. Now that Windows 10 is released surely Lenovo has an adapter driver somewhere for it?

RESOLVED: Turns out I had an "Array networks" SSL VPN client installed as part of my Softlayer ISP's remote desktop package, not Cisco at all but caused the same exact problem. I had to uninstall it completely and have since found out it doesn't work at all with Windows 10 and there is no timeframe to have it updated and Array networks or maybe just Softlayer apparently haven't gone out of their way to inform the public. Thank you guys for your help and I hope others in future will benefit from this post.

Just paid $6.99 for iPad highlighter at App Store. It's supposed to let me highlight things in a PDF file. I see no way to make it work in a PDF file. Thanx ahead of time for any help.

Just paid $6.99 for iPad highlighter at App Store. I can find no way to make it work in the iPad file when I call it up. It just sits there like any other app. Thanx in advance for the help. [email protected]

See if the developer has a website with intstructions. Check around in the app for instructions. They're often under settings. Contact the developer.

Autoscroll is not working. Even though I've enabled that funciton in the options menu, it is not working. I'm using a Lenovo Thinkpad. Thanks for your help.

I press the middle button on my Lenovo Thinkpad and try to scroll over a long web page but the page do not scroll. I have ticked the Autoscroll box on the options menu.
I switch to the Chrome browser and it works ok.
Please I appreciate your help. The Firefox 4 is awesome. I want to use as default browser but I really need the Autoscroll feature.
Thanks

Just as an update to this post, I was playing around with my printer just now. The specific printer issue I was having, when I created this post, was printing a shipping label via PayPal. After you create a shipping label a pop-up comes with the label where you can print. I was able to print a label (the one printed earlier with my dad's macbook air) in the landscape setting, but not the portrait setting. I wanted to see if this issue was persistent with any type of print job, so I printed out the homepage for google. I was able to print it just fine in both portrait and landscape. So, oddly for now, the only issue seems to be printing the PayPal shipping label in the portrait setting. I know this is such a weird and specific issue, but I would genuinely appreciate it if someone could help me figure out what's going on. For now, printing in the landscape setting is fine, but I'd much prefer to ship in the portrait setting. Also, in case it helps, when I printed the label via my dad's macbook air, I was able to print it just fine in the portrait setting. So this problem seems to be with my macbook pro.

HT204387 why wont my bluetooth work? whenever i turn it on, it keeps searching for devices even when there is an ipod touch 4g right beside me ( and the bluetooth in that ipod touch is turnned on too. so i dont know why its not working

pls i need help

The ipod and iphone will not connect. This has never been a feature of either device.
Bluetooth is supported for stereo headsets/speakers, handsfree telephone devices/headsets, some keyboards, some peer-to-peer apps from the app store and internt tethering where provided by the carrier.
Other than this, it will not connect to another device/phone/computer.

Can someone tell me the correct driver for the fuji xerox docuprint p205b for os x as the one on the fuji site does not work thank you!

I am desperate to find the correct driver for the p205b docuprint priner i know that the one on the fuji site is wrong and you need to install a driver for anothe rmodel as I found this in a forum last year and successfully installed on another mac but now I don't know where I got the info from, help !!! =)

I have the same printer and I'm using Lion 10.7.4.
I'm facing problems getting the mac to print via wireless.
I've installed the driver from http://support.apple.com/kb/DL904 as suggested by sig.
I've linked up the printer to the router via usb. It works like a charm with usb on Lion and wireless on windows.
Could anybody help ? I've included photos for more information. Many thanks.

SCCM 2012 OSD Task Sequence Fails "An error occurred while retrieving policy for this computer"

We have SCCM 2012 R2. I amm trying to start OSD task sequence from bootable media.
Hyper-v client gets DHCP ip and starts MDT bootable media, but could not find policy.
From F8 I can ping SCCM/DP/MP server.
What could be the cause?

Yes, this DHCP client is in the same subnet as other working clients.
smsts.log from client
Request was successful. TSPxe
21.03.2014 14:14:14 324 (0x0144)
pNext != NULL, HRESULT=80004005 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,1970)
TSPxe 21.03.2014 14:14:14
324 (0x0144)
reply has no message header marker TSPxe
21.03.2014 14:14:14 324 (0x0144)
DoRequest (sReply, true), HRESULT=80004005 (e:\nts_sccm_release\sms\framework\osdmessaging\libsmsmessaging.cpp,5868)
TSPxe 21.03.2014 14:14:14
324 (0x0144)
Failed to get client identity (80004005)
TSPxe 21.03.2014 14:14:14
324 (0x0144)
ClientIdentity.RequestClientIdentity (), HRESULT=80004005 (e:\nts_sccm_release\sms\client\tasksequence\tsmbootstrap\tsmediawizardcontrol.cpp,1113)
TSPxe 21.03.2014 14:14:14
324 (0x0144)
failed to request for client
TSPxe 21.03.2014 14:14:14
324 (0x0144)
Exiting TSMediaWizardControl::GetPolicy. TSPxe
21.03.2014 14:14:14 324 (0x0144)

BDD 2007 -- ZTI -- OSD error "The Operating System Installation Failed Unspecified Error (80004005)

Hi there
Wonder if anyone can advise me on a BDD 2007 OS deployment issue? (Apologies if this is in the wrong forum, I couldn't see a forum for BDD 2007.)
First of all, this BDD 2007 server and the OSD config was not done by me. For info, it is part of a SMS 2003 infrastructure.
I am trying to get the XP Pro build process working. I am led to believe the config has been completed.
Unfortunately, after booting the pc from the nic, I get an error. This is the order:
- the 'Initializing Windows PE' splash appears for perhaps 15 seconds
- very briefly, the text changes to 'Initializing Network'
- for a second or two only 'Initializing Windows PE' appears again
- then this error message appears:
"SMS Operating System Deployment - The Operating System Installation failed. Please contact your system administrator for assistance. Unspecified Error (80004005)"
I've spent some time looking into this error (80004005) and from what I can gather it possibly means 'access denied'.
I'm assuming after Windows PE loads the first Task Sequence begins, and if this possibly is where the issue lies?
One thing I cannot understand - the first Task Sequence (Initialization) has this command line (as do most, with different .wsf file):
cscript.exe "%SCRIPTROOT%\ZTIGather.wsf" /localonly
However, I cannot access %SCRIPTROOT% at all, Windows says it can't find it. I can run other variables such as %USERPROFILE%, %SYSTEMROOT%, etc, but cannot open %SCRIPTROOT%.
Is it simply the case that I should create a new system variable (that has not been created by whoever built the server)?
Thanks
John Henry

Since no one has answer this post, I recommend opening a support case with CSS as they can work with you to solve this problem.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Unable to install Adobe Digital Reader 3.0. Keep receiving error message "migration has stopped working" and then installation fails.

Every time I try to install Adobe Digital Reader 3.0 I get an error message "migration has stopped working" and the installation fails. Is there a solution to this?

Trying to install. Installation fails and I am unable to open it to migrate
epub books to transfer to ereader
In a message dated 8/31/2014 9:50:51 A.M. Eastern Daylight Time,
[email protected] writes:
Unable to install Adobe Digital Reader 3.0. Keep receiving error message
"migration has stopped working" and then installation fails.
created by kglad (https://forums.adobe.com/people/kglad) in
Downloading, Installing, Setting Up - View the full discussion
(https://forums.adobe.com/message/6688648#6688648)

Time Machine not working after ethernet card failed

A couple of weeks back my iMac Core Duo's ethernet failed. As a logic board replacement for a 3.5 year old iMac would be expensive I instead bought an Apple USB Ethernet adapter (which works great). However, now Time Machine will not work, it says it cannot find the built in network interface. It does not matter whether I connect the external drive directly via firewire or over the network to my Mac Mini (which will backup with either connection).
Here is the console error:
+Time Machine: Error setting backup path: Error Domain=com.apple.TimeMachine.Preferences Code=-1 UserInfo=0x1864bdf0 "Time Machine could not be configured. The built-in network interface could not be found."+
+_CSBackupGetMachineMACAddress - IOServiceGetMatchingServices did not find an ethernet service with kIOPrimaryInterface true+
I tried the instructions on the Apple Support page http://support.apple.com/kb/HT3275#5, but that did not work. Can anyone help?

Hi, and welcome to the forums.
It's a long shot, but try a "Full Reset" of Time Machine, per item #B3 of the Time Machine - Troubleshooting *User Tip* at the top of this forum.
TM uses your Mac's Ethernet Address, which is embedded in the hardware of, guess what, your logic board, to identify your computer. This is how it keeps the backups for each Mac separate, so you can back-up more than one Mac to the same place without conflicts.
To find this address, use the System Profiler app (click the Apple icon at the left of your Menubar, then +About this Mac,+ then +More Info.+
Select Network in the sidebar, then Ethernet then find a line like this: +*MAC Address: 0a:1b:2c:3d:4e:5f+* That code, omitting the colons, is what TM puts in a hidden file on your TM volume to identify it as your Mac's backups.
Since your internal Ethernet card failed, you may not see that at all. If not, neither, apparently, can Time Machine. Other than getting a new logic board, I don't think there's a workaround.

The iTunes upgrade didn't complete. Message comes up that says: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privideges to start system services." ...And neither Abort, Retry, or Ignore work.

The iTunes upgrade didn't complete. Message comes up that says: "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privideges to start system services." ...And neither Abort, Retry, or Ignore work.

Hi DaHare,
Thanks for using Apple Support Communities. If you are having trouble with Apple Mobile Device Service starting correctly, this article has steps you can take:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Cheers,
- Ari

HT1926 While updating my iTunes this message came up "Service 'apple mobile device' (apple mobile device) failed to start. Verify that you have sufficient privileges to start system services" what can I do to get my iTunes to work again?

While updating my iTunes this message came up "Service 'apple mobile device' (apple mobile device) failed to start. Verify that you have sufficient privileges to start system services" what can I do to get my iTunes to work again?

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Script that works in command line fails in EM.

Hi,
I'm using AIX 5.3 and tivoli dpo 5.4.1. Oracle DB is EE version 10.2.0.3
the following script works fine when I run it through a normal shell. (i.e. invoking rman by hand)
RMAN> run {
2> allocate channel oem_sbt_backup type 'sbt_tape' format '%U' parms 'ENV=(BLKSIZE=104857600, TDPO_OPTFILE=/usr/tivoli/tsm/client/oracle/bin64/tdpo.opt)';
backup as BACKUPSET current controlfile tag '06052007023232';
restore controlfile validate from tag '06052007023232';
release channel oem_sbt_backup;
3> 4> 5> 6>
channel oem_sbt_backup: validation complete, elapsed time: 00:00:08
Finished restore at 05.06.2007
released channel: oem_sbt_backup
RMAN>
but the same script run through the Enterprise Manager console gives me :
RMAN-03009: failure of allocate command on oem_sbt_backup channel at 06/05/2007 14:40:46
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27000: skgfqsbi: failed to initialize storage subsystem (SBT) layer
IBM AIX RISC System/6000 Error: 610: Unknown system error
Additional information: 7011
ORA-19511: Error received from media manager layer, error text:
SBT error = 7011, errno = 610, sbtopen: system error
And I cannot find anything from this message (errno=610) in metalink, google or here.
dsmerror.log and dsmoraerror.log tell me nothing, neither does sbtio.log. tdpoerror.log is empty.
In fact everything is look fine except for EM failing to backup to tape.
Does anyone know what is happening or what that error means?
Thank you for your time.
Regards
Oli

Have you configured your default channels from OEM, try configuring all your default channels at RMAN level, so that you dont have to specifiy in run { } script;
For Eg. in my environment , i have following settings and backup command works fine both from shell and grid
its Oracle 9.2.0.6
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 3;
CONFIGURE BACKUP OPTIMIZATION ON;
CONFIGURE DEFAULT DEVICE TYPE TO DISK;
CONFIGURE CONTROLFILE AUTOBACKUP ON;
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '/rman_backup/%F';
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE 'SBT_TAPE' TO '%F_TAPE_CONTROLFILE';
CONFIGURE DEVICE TYPE 'SBT_TAPE' PARALLELISM 4;
CONFIGURE DEVICE TYPE DISK PARALLELISM 5;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT '/rman_backup/d_%d_s_%s_p_%p_t_%t' MAXPIECESIZE 1536 M;
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' MAXPIECESIZE 1536 M PARMS "ENV=(NB_ORA_CLIENT=topdb1,NB_ORA_SERV=ilsdb2)" FORMAT 'd_%d_s_%s_p_%p_t_%t';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/opt1/app/oracle/product/ora92/dbs/snapcf_topaz.f'; # default
BACKUP DEVICE TYPE SBT CURRENT CONTROLFILE;

Adobe Story - I am trying to install the desktop application (to work offline) - and it fails whilst initializing

Adobe Story - I am trying to install the desktop application (to work offline) - and it fails whilst initializing
Any ideas?

Hi Four23olly,
Please follow the article: Troubleshoot download and install issues to resolve your installation issues with Creative Cloud Desktop Application.
Thanks,
Ratandeep Arora

WES 7 OSD standalone (works) vs bootable (fails) - Failed to find suitable device driver for device (help)

Similar Messages

Maybe you are looking for