Wf component container not starting with Virtual host

Hi,
We have setup fresh instance of R 12.1.1 on Solaris with Virtual host. Did installation with rapidwiz -servername virtual.
Now when we end setting up wfmailer setup it refused to start saying component services are not up. While looking at it, it is still looking for Physical host rather Virtual. Can anyone suggest how to resolve this.
Thanks

Post in 11i thread closing it

Similar Messages

Http tunnelling not working with virtual host

Hi,
We have recently migrated our application from OC4J server to the Weblogic 11g server. There is one EJB client module which connects using t3 protocol. We are trying to use Http Tunneling for it. The server setup consists of two machines (machine1.global.com and machine2.global.com) in clustered mode. A virtual host cbs.global.com is configured to load balance across the above 2 two machine. Also Apache HTTP Server plugin is used for handling the web tier.
For enabling tunneling, we have checked the 'Enable HTTP Tunneling' check box in the server. Also in the Httpd.conf file, we have added a block for
<Location /HTTPClnt>
SetHandler weblogic-handler
</Location>
If we give the initial context url as http://machine1.global.com:7005 or http://machine2.global.com, then it is working fine. But when we give the virtual host names - http://cbs.global.com or http://cbs.global.com:7005, it is not working. This application needs to be accessed outside the company network, so we cannot directly give the machine names and have to make it work using virtual host.
Please advise whether any other settings need to be done for enabling the tunnelling for virtual hosts.
Highly appreciate your help in this regard.
Best Regards,
Jaison
Edited by: user13152776 on Aug 29, 2011 7:00 PM

Thanks Peter for the reply.
We are having multiple managed servers configured to multiple ports - 7003, 7005, 7007, etc. Please find below the mod_wl_ohs.conf file
# NOTE : This is a template to configure mod_weblogic.
LoadModule weblogic_module "${ORACLE_HOME}/ohs/modules/mod_wl_ohs.so"
# This empty block is needed to save mod_wl related configuration from EM to this file when changes are made at the Base Virtual Host Level
<IfModule weblogic_module>
# WebLogicHost <WEBLOGIC_HOST>
# WebLogicPort <WEBLOGIC_PORT>
# Debug ON
# WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/weblogic.log
# MatchExpression *.jsp
# Dev Cluster Configuration - Port 7003
<Location />
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7003,nooslux051d.gl.2wglobal.com:7003
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/devcluster.log
MatchExpression *
</Location>
<Location /intApp>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7003,nooslux051d.gl.2wglobal.com:7003
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/devcluster.log
MatchExpression *
</Location>
# Ocean Cluster Configuration - Port 7005
<Location /CQS>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7005,nooslux051d.gl.2wglobal.com:7005
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/oceancluster.log
MatchExpression *
</Location>
# Websi Cluster Configuration - Port 7007
<Location /si>
SetHandler weblogic-handler
WebLogicCluster nooslux050d.gl.2wglobal.com:7007,nooslux051d.gl.2wglobal.com:7007
Debug ON
WLLogFile /app/oracle/middleware/user_projects/domains/base_domain/ClusterLogs/websicluster.log
MatchExpression *
</Location>
</IfModule>
Best Regards,
Jaison

SAPOSCOL does not start with SAP Host Agent processes

Dear all,
on one of our servers the SAPOSCOL process is not running. The latest SAP Host Agent is in place - automatic updating has been finished sucessfully but after the restart of the host agent processes SAPOSCOL returned the following entry in log dev_saphostexec:
[Thr 01] Fri Nov 25 11:23:30 2011
[Thr 01] *** WARNING => /usr/sap/hostctrl/exe/saposcol -l -w60 pf=/usr/sap/hostctrl/exe/host_profile exit with status 4 [OsCollectorW 171]
It is only a warning but as a consequence no SAPOSCOL process is running.
Any ideas? Your quick response will be very much appreciated
Regards,
Mattias Umlauf

Hi
if
/usr/sap/hostctrl/exe/saposcol -status
shows no PID but shared memory attached either cleanipc
or try to force start saposcol
/usr/sap/hostctrl/exe/saposcol -f
Regards
Stanislav

Path login does not start with a "/" character

I get a "java.lang.RuntimeException: Path login does not start with a "/" character" in my WebApplication.
- Http Status 500
- The server encountered an internal error () that prevented it from fulfilling this request.
Instead I excepted the site for a Re-Login (timout after 10 min), What's wrong?
The server I use is: Sun Java System Application Server Platform Edition 8.0 (build b57-fcs)
Here is the full StackTrace:
[#|2004-05-26T14:50:50.609+0200|SCHWERWIEGEND|sun-appserver-pe8.0|javax.enterprise.system.container.web|_ThreadID=17;|Standard
WrapperValve[OwaFolderTree]: Servlet.service() for servlet OwaFolderTree threw exception
java.lang.RuntimeException: Path login does not start with a "/" character
at org.apache.catalina.core.ApplicationContextFacade.doPrivileged(ApplicationContextFacade.java:451)
at org.apache.catalina.core.ApplicationContextFacade.getRequestDispatcher(ApplicationContextFacade.java:255)
at com.space2go.icafe.S2GHttpServlet.service(S2GHttpServlet.java:3260)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:861)
at sun.reflect.GeneratedMethodAccessor114.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:289)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:500)
at org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:311)
at org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:205)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:283)
at org.apache.catalina.core.ApplicationFilterChain.access$000(ApplicationFilterChain.java:102)
at org.apache.catalina.core.ApplicationFilterChain$1.run(ApplicationFilterChain.java:192)
at java.security.AccessController.doPrivileged(Native Method)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:263)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardContextValve.invokeInternal(StandardContextValve.java:261)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:215)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:200)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:180)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:582)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.webservice.EjbWebServiceValve.invoke(EjbWebServiceValve.java:134)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.security.web.SingleSignOn.invoke(SingleSignOn.java:272)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at com.sun.enterprise.web.VirtualServerValve.invoke(VirtualServerValve.java:209)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:161)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:156)
at com.sun.enterprise.web.VirtualServerMappingValve.invoke(VirtualServerMappingValve.java:166)
at org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:154)
at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:569)
at org.apache.catalina.core.ContainerBase.invoke(ContainerBase.java:979)
at org.apache.coyote.tomcat5.CoyoteAdapter.service(CoyoteAdapter.java:211)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:692)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.processConnection(Http11Protocol.java:647)
at org.apache.tomcat.util.net.TcpWorkerThread.runIt(PoolTcpEndpoint.java:589)
at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:691)
at java.lang.Thread.run(Thread.java:534)

It looks like you are getting this error when trying to use the RequestDispatcher. There are two different flavors of the RequestDispatcher :ServletRequest.getRequestDispatcher that will take a relative path and ServletContext.getRequestDispatcher that will only take absolute paths (ie start with a '/').
If yoy are trying the use the second version of RequestDispatcher you'll need to adjust the path to an absolute path.
http://java.sun.com/products/servlet/2.3/javadoc/javax/servlet/ServletContext.html

DB is not starting with spfile .

Hi ,
i am running DB (10.2.0.4) DB on solaris.x64 platform.
When i started the database after install , its giving error as
SQL> startup
ORA-00064: object is too large to allocate on this O/S (1,3994560)
I checked the sga_target size in spfile , which is set to (729145600 bytes ~ 595 M)
When installed another DB with sga_target size as 412 M
and started the DB it gives follwing error .
SQL> startup
SQL> ORA-00821: Specified value of sga_target 412M is too small, needs to be at least 552M
if i start the same DB with pfile where sga_target has set to 1632 M , the DB is starting successfully.
My question is if it is starting with this higher value of sga_target in with pfile , why it is not starting with a lesser value.

Cause: The specified value of sga_target is too small for the SGA to accommodate all of the necessary SGA components such as the log buffer, buffer pools, shared pool, etc.
Action: Set sga_target to the recommended value or reduce the values of any SGA component size parameters you have specified.
The previous solutions where correct, but if you're not providing a full path on the "CREATE SPFILE" make sure you have defined the parameter SPFILE. Otherwise you'll get the SPFILE created on $ORACLE_HOME/dbs/spfileDBNAME.ora
Regards,
Enric Moya

KIMYONG: "Service Component Container Not Running" error 시 조치사항

KIMYONG: "Service Component Container Not Running" error 시 조치사항
Purpose
WF Agent Listener 를 구동하고자 할때 아래 error를 발생하며 멈추게 됩니다.
이를 조치하는 방법은
ERROR
CANNOT START 'WORKFLOW AGENT LISTENER - ERROR:
"THE SERVICE ERROR COMPONENT CONTAINER"
Solution
전체적인 절차는 아래와 같습니다.
1. apache 를 bounce 합니다.
2. Workflow Mailer Service를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Service Components icon
d. Click on the Workflow Mailer Service link (Container column)
e. Select Workflow Mailer Service
f. Select Start from the list of values (top)
g. Click on go.
h. Wait until the Workflow Mailer service is "Activated"
3. Workflow Agent listener Service 를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Service Components icon
d. Click on the Workflow Agent listener Service link (Container column)
e. Select Workflow Agent listener Service
f. Select Start from the list of values (top)
g. Click on go.
h. Wait until the Workflow Agent listener service is "Activated"
4. Workflow Mailer를 시작합니다.
a. Workflow administrator Web Applications Responsibility
b. Workflow Manager
c. Click on Notification Mailers icon
d. Select Workflow Notification Mailer
e. Select Start from the list of values (top)
g. Click on go.
h. Do the same for the workflow deferred agent listener
Reference
Note 559388.1

Hi,
I'm having the same problem as you did.
I've tried pushing the button Go in the Oracle Workflow Manager - Service Components.
And it showed
An error has occurred!
The Service Component Container is not running.
Should I uninstall my Oracle Workflow?
And install a new installation of Oracle Workflow?
What does it mean by the "wfinstall"?
Is it the Oracle Workflow Configuration Assistant? which I can access using the wfinstall.bat.
Or should I replay the Oracle Workflow Configuration Assistant (wfinstall.bat) and choose Upgrade option?
Or should I uninstall all of my Oracle installation and start installing from the beginning?
BTW, what if I don't use (or have) OID?
Is it required?
Any clue would be grateful.
Thanks.
Buntoro

I have a column of names, some DO NOT start with a capital letter, how do I filter them

new to Mac environment and i have a column of names, some DO NOT start with a capital letter, how do I filter them

HI PTU,
You can mark the rows starting with lower case letters using a formula, then filter on the contents of the column containing the formula. For the example below, the names are in column B and the formula is in column C.
C2: =IF(AND(CODE(B)>=95,CODE(B)<=122),"!!!","")
CODE returns the ASCII code for the first character in the target cell. Lower case letters have ASCII codes in the range specified in the formula: a = 95, z = 122
For names starting with characters in this range, the forula returns a string of three exclamation points. For any other initial character, the formula returns a null string ( "" ).
An empty cell in column B will cause the formula to return an error in that row of column C. You can avoid this by embedding the formula in an IF statement that suppresses the calculation if the length of the entry in column B is less than one character. Revised formula shown below.
C2: =IF(LEN(B)<1,"",IF(AND(CODE(B)>=95,CODE(B)<=122),"!!!",""))
Regards,
Barry

Database not start with srvctl command in rac 10g

hi
when i change parameter in sqlnet file
SQLNET.AUTHENTICATION_SERVICES= (NTS) to SQLNET.AUTHENTICATION_SERVICES= (NONE)
then database is not started with srvctl utillity but started with sqlplus enviroment.
please help in this issue

user521214 wrote:
hi,
we are implementing security policy for our client. our databas is on RAC . As per the security, we need to revoke sys dba priviliges. when i used SQLNET.AUTHENTICATION_SERVICES=(NTS) in sqlnet.ora or SQLNET.AUTHENTICATION_SERVICES=(NONE). the instance not start with the following command in rac 10g.
$srvctl start database -d abc
$ crs_stat -t
Name Type Target State Host
ora.db.db application OFFLINE OFFLINE
ora....b1.inst application ONLINE OFFLINE hosttest01
Edited by: user521214 on Apr 21, 2011 4:08 AMIs this the only parameter you changed? What happens when you undo this modification?
What do you see on log files?

Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.

Hi,
I have a MBP 13' Late 2011 and Yosemite 10.10.2 (14C1514).
Until yesterday, I was using Garmin ConnectIQ SDK and all was working fine.
Yesterday, I've updated my system with latest security updates and Xcode updates too (Version 6.2 (6C131e)).
Since, I can't launch the ConnectIQ simulator app, I have this message in console :
8/04/2015 15:19:04,103 mds[38]: There was an error parsing the Info.plist for the bundle at URL Info.plist -- file:///Volumes/Leto/connectiq-sdk-mac-1.1.0_2/ios/ConnectIQ.bundle/
The data couldn’t be read because it isn’t in the correct format.
<CFBasicHash 0x7fa64f44e9a0 [0x7fff7dfc7cf0]>{type = immutable dict, count = 2,
entries =>
0 : <CFString 0x7fff7df92580 [0x7fff7dfc7cf0]>{contents = "NSDebugDescription"} = <CFString 0x7fa64f44f0a0 [0x7fff7dfc7cf0]>{contents = "Unexpected character b at line 1"}
1 : <CFString 0x7fff7df9f5e0 [0x7fff7dfc7cf0]>{contents = "kCFPropertyListOldStyleParsingError"} = Error Domain=NSCocoaErrorDomain Code=3840 "The data couldn’t be read because it isn’t in the correct format." (Conversion of string failed.) UserInfo=0x7fa64f44eda0 {NSDebugDescription=Conversion of string failed.}
I have looked at this file and it looks like a binary plist
bplist00ß^P^V^A^B^C^D^E^F^G^H
^K^L^M^N^O^P^Q^R^S^T^U^V^W^X^Y^Z^[^\^]^^^_ !"$%&'()'+,^[\CFBundleNameWDTXcodeYDTSDKName_^P^XNSHumanReadableCopyrightZDTSDKBuild_^P^YCFBundleDevelopmentRegion_^P^OCFBundleVersi on_^P^SBuildMachineOSBuild^DTPlatformName_^P^SCFBundlePackageType_^P^ZCFBundleShortVersionString_^P^ZCFBundleSupportedPlatforms_^P^]CFBundleInfoDictionaryVersion_^P^RCFBundleE xecutableZDTCompiler_^P^PMinimumOSVersion_^P^RCFBundleIdentifier^UIDeviceFamily_^P^QDTPlatformVersion\DTXcodeBuild_^P^QCFBundleSignature_^P^ODTPlatformBuildYConnectIQT0611[iph oneos8.1o^P-^@C^@o^@p^@y^@r^@i^@g^@h^@t^@ ^@©^@ ^@2^@0^@1^@5^@ ^@G^@a^@r^@m^@i^@n^@.^@ ^@A^@l^@l^@ ^@r^@i^@g^@h^@t^@s^@ ^@r^@e^@s^@e^@r^@v^@e^@d^@.V12B411RenQ1V14C109Xiphoneos TBNDLS1.0¡#XiPhoneOSS6.0YConnectIQ_^P"com.apple.compilers.llvm.clang.1_0S8.1_^P^Tcom.garmin.ConnectIQ¡*^P^AW6A2008aT????^@^H^@7^@D^@L^@V^@q^@|^@<98>^@ª^@À^@Ï^@å^A^B^A^_^A?^AT^ A_^Ar^A<87>^A<96>^Aª^A·^AË^AÝ^Aç^Aì^Aø^BU^B\^B_^Ba^Bh^Bq^Bv^Bz^B|^B<85>^B<89>^B<93>^B¸^B¼^BÓ^BÕ^B×^Bß^@^@^@^@^@^@^B^A^@^@^@^@^@^@^@-^@^@^@^@^@^@^@^@^@^@^@^@^@^@^Bä
I guess it is a normal format but my system seems to be unable to read binary plist ?
I tried some stuff with plutil
plutil -lint Info.plist
Info.plist: Unexpected character b at line 1
Same for convert
plutil -convert xml1 Info.plist
Info.plist: Property List error: Unexpected character b at line 1 / JSON error: JSON text did not start with array or object and option to allow fragments not set.
I also try to download a fresh version of the connectIQ SDK and no changes.
Any idea ?
Thanks

Step by step, how did you arrive at seeing this agreement?

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?

Hi, Im from Philippines,.... i am currently using my iPhone 4 (iOs.6.3)it started when i upgrade it from iOs4 to iOs 6.3 , My iPhone doesnt identify numbers even if its in my contact if its not starting with +63 ..what will i do?
I change everything into +63 and i thought everything is already fine,.. and then now , i dont know what happened why it doesnt recognize numbers with +63 anymore

Hello hsielglad,
Thank you for your question. iTunes 11.1 is required to update to and sync with iOS 7. If you are still running iTunes 10.6.3, I recommend trying to obtain the update by going to the iTunes menu and selecting Check for Updates.
iTunes: How to install the latest version
http://support.apple.com/kb/HT5654
If you continue to get the message that iTunes is up to date, you can download the latest version of iTunes here:
Download iTunes
http://www.apple.com/itunes/download/
Once the file downloads, double click on the installation file that downloaded to initiate the installation.
Best,
Sheila M.

Error: response does not start with HTTP

hi,
i am using a MIDP class to send a string to a java servlet which then returns a .gif image. the string is being successfully to the servlet, but an exception is being thrown when the image is being sent back.
java.io.IOException: response does not start with HTTP it starts with: GIF89aï4
at com.sun.midp.io.j2me.http.Protocol.readResponseMessage(Protocol.java:2166)
at com.sun.midp.io.j2me.http.Protocol.finishRequestGetResponseHeader(Protocol.java:1934)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1598)
at com.sun.midp.io.j2me.http.Protocol.sendRequest(Protocol.java:1517)
at com.sun.midp.io.j2me.http.Protocol.openInputStream(Protocol.java:484)
my code is as follows in the midp class :
HttpConnection c = null;
InputStream is = null;
StringBuffer sb = new StringBuffer();
String url="http://localhost:8090/ProjectServer/createMap";
url=url+"?Source="+src+"&Destination="+dest;
try {
c = (HttpConnection)Connector.open(url,Connector.READ_WRITE, true);
c.setRequestMethod(HttpConnection.GET); //default
//is = c.openDataInputStream();
is = new DataInputStream(c.openInputStream()); //openInputStream(); // transition to connected!
Image im=null;
try
ByteArrayOutputStream bStrm = new ByteArrayOutputStream();
int ch;
while ((ch = is.read()) != -1)
bStrm.write(ch);
// Place into image array
byte imageData[] = bStrm.toByteArray();
// Create the image from the byte array
im = Image.createImage(imageData, 0, imageData.length);
finally
// Clean up
if (is != null)
is.close();
the code in the servlet is as follows :_
ServletContext sc = getServletContext();
// Get the MIME type of the image
String mimeType = sc.getMimeType("route.gif");
if (mimeType == null) {
sc.log("Could not get MIME type ");
response.setStatus(HttpServletResponse.SC_INTERNAL_SERVER_ERROR);
return;
// Set content type
response.setContentType(mimeType);
// Set content size
response.setContentLength((int)file.length());
// Open the file and output streams
FileInputStream in = new FileInputStream(file);
OutputStream outstream = response.getOutputStream();
// Copy the contents of the file to the output stream
byte[] buf = new byte[1024];
int count = 0;
while ((count = in.read(buf)) >= 0) {
outstream.write(buf, 0, count);
in.close();
outstream.close();
il be immensely grateful if some1 cud tell me whre i am gng wrong.
thnx,
nev

Hi, I�m trying to do the same as above, get MP3 from a Shoutcast server.
I got the same fault ("response does not start with HTTP it starts with: ICY") when I tried to open an HttpConnection as bellow:
============================================
HttpConnection conn = (HttpConnection) Connector.open("http://64.236.34.196/stream/1074");
Then I tried to open a socket connection as bellow:
======================================
SocketConnection conn = (SocketConnection) Connector.open("socket://64.236.34.196:80");
String get = "GET /stream/1074 HTTP/1.1";
DataOutputStream os = conn.openDataOutputStream();
os.writeUTF(get);
InputStream is = conn.openInputStream();
But then I got the following error:
=========================
java.lang.SecurityException: Target port denied to untrusted applications
Could someone help me to find out what is going on?
Thanks a lot!

A name should not start with any special characters

I need to put a condition in iF statement such that a name that is given by the user should not start with any special charecters.A dialog box should display indicating this conditon.Can u plz give sample code for this.My code is as below.
//text box for giving the name
JTextFeild ReportNameText;
//the name is stored in String
String name=ReportNameText.getText();
//Here tell me how the if condition should be written
//condition to be mentioned

Already asked, and answered, here: http://forum.java.sun.com/thread.jspa?threadID=727919
See reply 4 in that thread, and scsi-boy's suggestion of writing another
method to check for "special" characters. And the links to the String
and Character API documentation given.

"Layer 1 does not start with a new cell" replicator error

Hi All,
I recently sent a dual layer +R DVD off to our replication house and their system is returning a message that says: "Layer 1 of DVD-Video does not start with a new cell".
I know from reading that the dual-layer breakpoint must be set to the end of a cell, but what does the word "cell" translate into for DVDSP4?
I had the DVD DL+R set to Automatic and Non-Seamless for output for the break point. Should I just try setting the break point manually at the beginning or ending of a track that would be dubbed as just a little more than half the size of the content? (I know in OTP, the Layer 0 has to be bigger than Layer 1)
Please Help!
Cheers,
Dusty

Thanks both of you for your replies.
Eric, I am currently exporting DDPs to send in to the replicator. I also emailed them asking if they accept this format for delivery. (Which I would hope they would, as it is, an answer to DLT of sorts) Thanks for bringing this up, DDP is new to me, as this is our first DL project for replication.
Drew, to answer your reply, yes I have two viable markers (chapter markers) that show up in black, not grayed out, in the tab you mentioned under formatting. I chose manual break point selection for this last disc I burned and chose chapter 4 of that track. (chapter 4 and chapter 5 of track 6 are only options) I have to assume that the "automatic" setting was selecting chapter 5, as it had to see that as the last viable marker available to select, as described in the DVDSP4 manual.
DVDSP4 says that all markers are considered cells- Or actually that tracks are cells and that the markers within them make up more cells. So my question, outside of DDP option, would be, "what truly constitutes a cell boundary in DVDSP4?" Is it the markers within the tracks or the beginning or ends of the tracks themselves?
As a side note, I burned the disc that received the error, "Layer 1 doesn't start with a new cell" from an IMG i created from DVDSP4 through Disk Utility. Word is that IMG's somehow don't include breakpoint information.
So at this point I don't know if it is the IMG or the fact that DVDSP4 wants the break at one of two possible chapter markers in track 6.
(Some more background- this is a TV show season DVD, with thirteen tracks of video, each with 12-14 chapter markers a piece.)
Any more thoughts to help clear the air on what constitutes a true new cell boundary?
Thanks sooo much Eric and Drew, I know this a long read.
Cheers,
Dusty

HWS file error when not starting with Ch 0

Hello,
I used the "niScope EX Save to File - HWS Low Level - Single Channel Stream.vi" as my starting point and added 8 channels for a 5105 card. Although this is a complex Queue-based vi, it works fine as long as my RAID is fast enough.
However, we have need to take data from channels 4 to 7 and not start with Ch 0. When I do this, my LabVIEW HWS reader does not see any data, nor does the MATLAB code I have written to read our HWS files.
Looking at the file in HDFView, I see that the data starts in vector0 and not vector1, as when I record Channels 0 to 3.
Perhaps I need to use the HDF5 LabVIEW code to force the writing to a different location in the HDF file?
Thanks for your help.

Hello,
I was out of the office Mon. and Tues. I took out a section that just collects one 5105 card in a steaming, continuous collect mode. This is part of a much bigger VI and I included the “Helper Aps” folder that has all the sub-VIs for that larger app. There are more sub-VIs than you need for “5105 Cont Collect.vi”, but it should run once you tell it where the sub-VIs are. Included is a quick-look reader I use to look at the data.
The data file Ch_0_to_3_5105-0.hws can be read, but the Ch_4_to_7_5105-0.hws file cannot.
Thank you for your help.
Attachments:
5105_Cont_Collect.zip ‏3267 KB

Managed server is not starting with MSI mode

Managed server not starting with MSI mode even though we enabled the managed server independence mode
Started the admin server and managed server first time enabled the MSI mode.
Restarted all admin and Managed server.
We have tested the following scenarios
scenarios1: Stopped the Admin server and restarted the Managed server with MSI mode it comes up.
scenarios2:Admin server is running but not able to connect to the managed server
In this scenario
we have removed the Network cable and restarted the managed server its throwing ldap error.
<Aug 14, 2010 1:58:32 PM SGT> <Error> <Security> <BEA-090870> <The realm "myrealm" failed to be loaded: weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: [Security:090730]Failed to verify credential mapper LDAP hierarchy
netscape.ldap.LDAPException: failed to connect to server ldap://sgppsr00383:16827 (91)
at netscape.ldap.LDAPConnSetupMgr.connectServer(LDAPConnSetupMgr.java:515)
at netscape.ldap.LDAPConnSetupMgr.openSerial(LDAPConnSetupMgr.java:435) at netscape.ldap.LDAPConnSetupMgr.connect(LDAPConnSetupMgr.java:274)
at netscape.ldap.LDAPConnSetupMgr.openConnection(LDAPConnSetupMgr.java:199)
at netscape.ldap.LDAPConnThread.connect(LDAPConnThread.java:109)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:1083) at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:954)
at netscape.ldap.LDAPConnection.connect(LDAPConnection.java:781)
at weblogic.ldap.EmbeddedLDAPConnection.getAndInitDelegate(EmbeddedLDAPConnection.java:2031)
at weblogic.ldap.EmbeddedLDAPConnection.add(EmbeddedLDAPConnection.java:1065) at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.addEntry(DefaultCredentialMapperLDAPHelper.java:537)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.createOrgUnit(DefaultCredentialMapperLDAPHelper.java:432)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.verifyHierarchy(DefaultCredentialMapperLDAPHelper.java:407)
at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.<init>(DefaultCredentialMapperLDAPHelper.java:146) at weblogic.security.providers.credentials.DefaultCredentialMapperLDAPHelper.getInstance(DefaultCredentialMapperLDAPHelper.java:112)
at weblogic.security.providers.credentials.DefaultCredentialMapperProviderImpl.initialize(DefaultCredentialMapperProviderImpl.java:93)
at com.bea.common.security.internal.legacy.service.SecurityProviderImpl.init(SecurityProviderImpl.java:53)
at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:340) at com.bea.common.engine.internal.ServiceEngineImpl.findOrStartService(ServiceEngineImpl.java:292)
at com.bea.common.engine.internal.ServiceEngineImpl.lookupService(ServiceEngineImpl.java:263)
at com.bea.common.engine.internal.ServicesImpl.getService(ServicesImpl.java:71)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealm(CommonSecurityServiceManagerDelegateImpl.java:461) at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadRealm(CommonSecurityServiceManagerDelegateImpl.java:822)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initializeRealms(CommonSecurityServiceManagerDelegateImpl.java:851)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1007)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:854) at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64) at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209) at weblogic.work.ExecuteThread.run(ExecuteThread.java:181)
- with nested exception:
Managed server looking for ldap configuration from admin server.
I have checked the all configuration file same on both managed server and admin server.
Please let me know How to recover the managed server in this scenario.
Edited by: user10773210 on Aug 16, 2010 11:55 PM
Edited by: user10773210 on Aug 17, 2010 2:38 AM

thanks for the reply....
the managed server is pointing to jrokit_160_22_D1.1.1-3 jdk....the server has enough ram also...while running the managed server showing status 'STARTING' for long period of time...and the admin server health goes 'Warning' because of threadpool....when we stop the managed server then adminserver health becomes ok...

Wf component container not starting with Virtual host

Similar Messages

Maybe you are looking for