WF with Multi-condition is not work
Hi All,
I am using an object subtype of the FIPP - document park, which is called a YFIPP01, and I have to include a new atribbutes (vbkpf-Blart). swo1:
YFIPP01.DocumentType DocumentType (released)
Now my WF is being generated and the workitem too. But my WF is working with a small problem, I made multiple condition using the new attribute (Blart) is not working.
When I check the log through the Tcode SWEL/Workitem see that the attribute in the container (Blart) is marked "not set".
SWEL/Workitem :
Display Container Instance for Workitem 00000004081
Expression Values
Documenttype <Not Set>
Any help is very welcome.
Joao
Karri Kemppi, First thanks for responding.
If you test/instantiate an object in SWO1, is the attribute getting populated? You should test it in SWO1 at the first place. Only after you get it working there, you can expect it to work in workflow.
ok I had already tested the object as shown below and the attribute is populated.
YFIPP01 005019000002282011
Atributos
DOCUMENTNO 1900000228
DOCUMENTTYPE T1
FISCALYEAR 2011
FLAGCOMPLETE X
FLAGRELEASED
LEVELCOUNTER 00
OBJECTTYPE YFIPP01
SOURCECOMPANYCODE 0050
USERCHANGE ABAP
Similar Messages
-
BI Web services - Prompts with 'OR' condition are not working
Hi Gurus
I am using BIWS to build my Xcelsius dashboards . When i building a webservice from webi report having two data providers named fact & dim and i merging two data providers and the result i am using in a report.
The Fact data providers contains a query filters with 'OR' conditions applied in it.
when i test this webservice with the values it always displaying the last refreshed instance of report even i purge the data before building web service.
Could you please let me know is any one faced this issue. I am using Webi rich client 12.3.1 version
Note *: The web service works fine if i am using query filters with 'AND' condition.
Kindly check this do the needful
Cheers
KarunHai
Check this
Re: Web Intelligence BI Web Services and Xcelsius
http://everythingxcelsius.com/xcelsius-training/xcelsius-and-business-intelligence-web-services-biws/3642
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/00536d65-f9cf-2e10-0eaa-f3346306dc1a
http://www.asug.com/CalendarEventDetails/tabid/150/eventid/2509/Default.aspx
http://www.forumtopics.com/busobj/viewtopic.php?p=819152 -
SetProperty with multi valued properties not working
having the same problem as this post:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.personalization&item=603&utag=
looks like i'm getting a null pointer from PropertyBean.PropertyObject for some
reason. i took the code available in the admin tool and tried to replicate that,
but it doesn't seem to work properly. the article link above shows the same details
of the problem that i'm having.Dan,
I took a quick look at the code and need a little more information to
determine whether this is a bug. Could you switch off JIT so we can see line
numbers on the exception? It appears that the EntityPropertyManager thinks
that you are setting a simple Text property. You could also try repeatedly
calling setProperty passing each String from your ArrayList.
Sincerely,
Daniel Selman
"Dan Kim" <[email protected]> wrote in message
news:3af6f412$[email protected]..
>
having the same problem as this post:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.develo
per.interest.personalization&item=603&utag=
>
looks like i'm getting a null pointer from PropertyBean.PropertyObject forsome
reason. i took the code available in the admin tool and tried toreplicate that,
but it doesn't seem to work properly. the article link above shows thesame details
of the problem that i'm having. -
If condition statement not working in jsp scriptlet
<%
String hostName = java.net.InetAddress.getLocalHost().getCanonicalHostName();
if(hostName.endsWith("dinesh.com"))
System.out.println("it works");
else {
System.out.println("it doesn't work");
%>
I am getting output as it works & it doesn't work. It seems the If condition is not working. Pls help with this issue.
ThanksDinesh_Nala wrote:
Even the condition in if is returning true, the x value i am get as "/user2/"How did you knew that it returns true? Or did you just expect that? Do you trust yourself more than Java? Too bad.
Just debug it:
System.out.println("Actual hostname value: [" + hostName + "]");
System.out.println("Does it end with dinesh.com? " + hostName.endsWith("dinesh.com")); -
Guard Condition is not working
Dear Friends,
I have created a dashboard using BI queries. output of queries is displaying via charts.
Now i have to display charts one by one in single layer. Here i triggered the Select Event on the output of CHART A and Guard Condition as well.
Now guard condition is not working properly. i want display of CHART A first then after clicking on tab i want display of CHART B. But here i always get CHART B first, which is not the requirement.
I am using VC 7.0 with flex2 compiler. EP patc level is SP17.
Kindly hep me out to resolve this.
Thanks & Regards
NiveditaDrag an output from your table to a data store and add a field to the datastore (lets call it GUARDFIELD). Click the connector between the table and the data store. Make sure the event name is select and assign GUARDFIELD with the following value:
STORE@GUARDFIELD+1
Now add a guard condition to the select connector between the table and chart B and use following code:
STORE@GUARDFIELD>0
This is going to check that GUARDFIELD is greater than 0, which will only be true when you click the table for first time. If this doesn't make sense let me know and I'll try find the blog which explains this. -
Multi touch gestures not working in mountain lion?
Any one else having problems with their multi gesture trackpad not working when you wake your notebook from sleeping with Mountain Lion? If I restart it fixes it but once it falls asleep it stops working again.
I've been having the same problem. When my MBP would wake from sleep any touch gestures that used more than two fingers would not work. I also had the issue where the MBP would forget the wireless network when it woke from sleep. I found this answer on another thread and it worked on both issues for me.
Instructions:
Reset PRAM: http://osxdaily.com/2010/11/15/reset-pram-mac/
Reset SMC: http://osxdaily.com/2010/03/24/when-and-how-to-reset-your-mac’s-system-managemen t-controller-smc/ -
After "upgrading" from trial to FCPX 10.0.3 multi cam does not work
After "upgrading" from trial to FCPX 10.0.3, multi cam does not work anymore. Everything was fine in the trial version, but now the multicam clip I made in trail is shown, but not with the 4 windows, only the first angle can be seen. And I can not find (import) the cuts I made in the trail. The settings are the same in both versions. Am I missing something? Is it possible that I have to start from scratch and all work is lost?
When I double click the multi cam clip I see all four angles in the timeline, one underneath the other...
Any help is appreciated! Thanks!There is an excellent podcast tutorial series called "Creative COW Final Cut Help Tutorials Podcast (SD)"
in the iTunes Store.
The latest three are video podcasts and go into great depth concerning the new Multicam in 10.0.3
Can't recommend them enough. -
Multi scanner software not working after E71 FW U...
Multi scanner software not working after E71 FW Update to 3.1
Nice bit of trouble-shooting. Thanks for sharing the final solution.
-
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
AndyIf you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
Try running the install program for the ZSC with the following command line:
setup.exe /V"STUNINSTALL=1"
If you've specified an uninstall password, try this one instead:
setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
Let me know if that helped you.
Daniel
>>>
From: Andy_DeWees<[email protected] du>
To:novell.support.zenworks.endpoint-security-management
Date: 2/5/2009 12:52 PM
Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
Windows xp sp3
ESM 3.5.154
Thanks,
Andy -
SSRS 2012 multi select parameter not working in Report Manager.
Hello,
I have one report with Multi select parameter. its working fine in bids, report server but I am facing some issue on report manager 2012.
Issue is, In Multi select parameter I have Suppose 6 value a,b,c,d,e,f after the deployment on report manager for the first time report is working fine with selecting all the value. but for the second time if my selection include either
a or f report gives no result and check box get unselect.
I also try on different report manager but same result.
what can be a issue here causing problem only for two value but working fine for other value?
Thanks,Hi Javed,
The Issue is with when you click on View Report button of Report Manager for Parameters which contain CHAR(10) and CHAR(13).
Where ever that Column is used in Report Data Set ,
Use replace(replace(Param,char(10),''),char(13),'') function.
----------------Please Mark This as Answer if it helps to solve your problem---------------------------- -
my iphone 3gs with version 4.0 not works for apple TV what should i do?
Welcome to the Apple community.
You should update your iPhone software. -
Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything possible
Connecting Wahoo Blue HR with iPhone 5 does not work, tried everything what I could find in the interenet as solution??????
IPhone 4s, iOS 7.1.1: iphone can't connect to wahoo HR BT4.0 sensor :((( Wverything worked fine with iOS 6 !!!
-
Hyperlink with tracking applied does not work in PDF
We use lots of web addresses in our advertising and generally the web addresses automatically convert to hyperlinks when we distill the files and make PDFs. Recently we've had two instances where someone applied tracking or justification to the line of text containing the url to make it spread across the page. When we make our PDF the url is not clickable. Is there anyway around this? We tried actually creating a hyperlink manually in InDesign by using the Hyperlinks panel and entering the address, but that didn't work either.
Peter,
We'll look into that. We already do two separate PDFs for print and web, but
we are distilling both right now. Wouldn't be too much of a problem to
change to exporting the web version I don't think.
I did a test, just curious, is there a way to keep it from putting a black
box around the link on the PDF?
Thanks for your help! We appreciate it!
Beth
From: Peter Spier <[email protected]>
Reply-To: <[email protected]>
Date: Fri, 14 May 2010 13:24:04 -0600
To: Beth Phillips <[email protected]>
Subject: Hyperlink with tracking applied does not work in PDF
Distilled PDF uses Postscript which does not support hyperlinks and
interactivity. To make your hyperlinks in ID you'll need to export and check
the Include Hyperlinks and Include Interactiviity boxes.
Your printer doesn't need hyperlinks because they don't work on a printed
page. The requirements for print and interactive PDF are quite different, and
you may find you need to make two versions.
> -
XI ALERTS with out BPM Are not working.
Hi All,
We are on XI 3.0 sp14. Alerts with out BPM are not working. I want to apply notes 906044, 876546. It says i need to make some changes to the following functions. I could not able to find these Function modules in the first place. Can some one help me out?
<b>Note -
Object -
Name</b>
906044 -
function---- SXMS_ALERT_ERROR_RECEIVE
906044 -
function --- SXMS_ALERT_ERROR_SEND
906044&876546--method ---CL_XI_ALERT HAS_ACTIVE_RULE
906044 -
method -
CL_XI_ALERT_UTIL GET_MDT_URL
905896 -
method -
CL_XI_ALERT CREATE_ALERT
Thank you
Ganges Leaves.Ganges
Login into XI Developement and give SE37 Transaction. Then you give SXMS_ALERT_ERROR_RECEIVE and click 'display'.
Then you check for the methods CL_XI_ALERT HAS_ACTIVE_RULE, CL_XI_ALERT_UTIL GET_MDT_URL, CL_XI_ALERT CREATE_ALERT and make the changes according to service notes. If you dont find this methods in this function then you can try in SXMS_ALERT_ERROR_SEND.
Regards,
---Mohan -
Why condition does not work.
Hi Pros,
in my bex query, there is a CKF OT hours, having a value 30.000, when I set a condition for 'OT hours = 30.000', but get no result out. could you please tell why condition does not work.HI,
please check the "Characteristic Assignment" Tab in change condition window.
In that tab default selection as "All Characteristic in the drill down independently" change that selection as "Individual characteristic and Char. combinations" and choose the particular characteristic. for ex OT hours against employee means select employee alone.
Regards
Sureshkumar C
Maybe you are looking for
-
Creative Media Source 5 and Zen
I own the Zen VW and use the Creative Media Source 5. The problem I find is when I try to transfer songs to the Zen. I am trying to copy my smart playlist of fi've star tracks over. On the pc it has over 000 tracks, but only 550 or so end up on my Ze
-
Dataguard showing 8hr lag between logs between primary and physical
I'm showing around 8 hrs between when my primary sends the redo to my physical standby. My protection mode is at maximum performance. I'm wondering if I should change the time that my primary sends the redo to something shorter? Is this ok to have su
-
Slow internet connection - Linksys WRT54G2
About a week and a half ago my wireless router started performing very slowly for no apparent reason. I've tried resetting it to factory defaults, increasing the security (changed from WEP to WPA2), and changing the wireless channel. I tried plugging
-
The shutting down of my macbook at times is hanging or takes long ever since I upgraded the operating system to Lion. I am forced to hold down the on button for some seconds to shut it down manually. What could be the course of this?
-
BW Archiving run Locks data upload
Hello BW Experts. We are working with Archiving, but we have one problem, when we do data load to InfoProvider, data Load is failing due to Archiving run locks. If we run Delete archiving step, then we can do data upload to InfoProvider without any