WH tax line items cleared along with Other line items Message no:8I701
hI guru,
When i run J1INCHLN System givem the error is : Withholding tax line items cleared along with other line items, message no:8I701
Pleas any one give solution ..
I also cheked as respective g/l for tds IN FBL3N . All line items are opend.
Also cheked all selection parameter in J1INCHLN and FBL3N .is same .
Why the sys behaviour like this .
Thanks is andvance
Milind
HI,
he error is occuring in this part of the
unction Module J_1IEWT_CHALLAN_UPDATE
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
LOOP AT p_t_ausz1.
Select the cleared line item from bseg table.
SELECT SINGLE * FROM bseg INTO p_bseg_tab
WHERE bukrs = p_t_ausz1-bukrs
AND belnr = p_t_ausz1-belnr
AND gjahr = p_t_ausz1-gjahr
AND buzei = p_t_ausz1-buzei
AND ktosl = 'WIT'
AND qsskz NE space .
IF sy-subrc <> 0.
This is not an ewt clearing transaction relevant for challan update.
p_no_with_clear = 'X'.
EXIT.
ELSE.
APPEND p_bseg_tab.
ENDIF.
ENDLOOP.
Even if one line item chosen is not of withholding tax entry, system
should exit by error message.
DESCRIBE TABLE p_bseg_tab LINES p_bseg_lines.
DESCRIBE TABLE p_t_ausz1 LINES p_with_lines.
IF p_bseg_lines > 0.
At least one entry is found in bseg table for challan update. IF p_with_lines NE p_bseg_lines.
At least one line chosen by the user is not for challan updation.
MESSAGE e701(8i).
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>.
This is a clear case,that you are trying to post some documents
which does not match with the selection parameters.
I feel the above problem could be due to some document/s (open items of
the earlier years)are incorrect which is causing the reported problem.
Kindly run the challan update program for smaller date range so that you
can find the faulty document.
Hope this solves your query.
Reg
Madhu M
Similar Messages
-
Withholding tax lines are being cleared along with other line items
Hi All,
While doing J1INCHLN(payment making of TDS), system giving error i.e.
"Withholding tax lines are being aleared along with other line items"
Please suggest me in this issue...it would be great help for me.
Thanks,
SaisriHi,
As per my analysis we found some documents, here We have made advance payment to vendors with TDS and again rised invoce to vendors with TDS and these documents have been nockedoff in F-54.
We have many documents of such nature and as per me it is because of these documents the system is throwing error. Pls. advice as to how to proceed on this.
Thanks,
Saisri -
I am missing many elements, it seems in my InDesign program. How can this be? I am taking a course at the local college (inDesign CS6), and when going through the book and steps, I keep noticing that I am missing things. For example: When I open a New Document - no new document window shows up on my screen, and there is no way to change the page size, etc that shows up. 2.) There is no Object Styles panel - Window>Styles>Object Styles - but the Object Styles option doesn't exist. 3.) There is no Effects panel to be found, either. As I continue the course, more and more things keep showing up like this. What is going on? I am not doing something wrong; my instructor verified that indeed these things seem to be missing. I purchased the Adobe Creative Suite 6 Design & Web Premium disk for Windows OS. Please help!
I did have trouble installing the disk, but thanks to someone in the forum, I was able to drag everything to the desktop and it installed that way. Could that be why this is happening?The Knowledge Base plugin is not required, but the Master Page is, so there's definitely an install problem. Go back to Help, and hold down the Ctrl key while you click on About InDesign. What is the full version number in the upper left of the dialog that appears?
Also, go to Adobe - Exchange : Download the Adobe Extension Manager and download and install the latest version of the CS6 extension manager. -
How to get Header data into multiple times along with the Line Items
Dear All,
I have problem while mapping the Header data and line item data to the flat file structure, Header data have to repeat along with the Line item data in the flatfile.
Details is below.
Example
Header record is one
E1EDK01
E1EDKA1
Line items are two
E1EDP01
E1EDP01
I want in the flat file two records having duplicate data in the fields which is belongs to header data
Like :
Record # partner data Line item data
Record 1 : WE name1 city 00010 materialname1 156
Record 2 : WE name1 city 00020 materialname2 198
( WE name1 city - data is same in the record 1)
For this what I did is I mapped the node E1EDP01 to the flat file message type node then I got all the line item data and first record is with header data but not in the second record.
I tried all node functions but no result because Idoc itself header data exists one record, I am not able to copy.
If any one knows , please give solution.
It is great help to me.
Thanks in Advance.
RamaraoDear Ramarao,
This will help you,
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/f59730fa-0901-0010-df97-c12f071f7d3b
No Documentation for Mapping Function useOneAsMany (Mapping Problem)
/people/claus.wallacher/blog/2006/04/17/replication-of-nodes-using-the-graphical-mapping-tool
/people/narendra.jain/blog/2005/12/30/various-multi-mappings-and-optimizing-their-implementation-in-integration-processes-bpm-in-xi
/people/sravya.talanki2/blog/2005/12/08/message-mapping-simplified-150-part-ii
Thanks & Regards
Agasthuri Doss -
How to automate the adding of check-box along with each numbered item in Framemaker file ?
I tried using the wingdings font as check-box. But I don't want to use it manually every time. I want to have it as a style part of my procedure style (numbering style). I need the check-box along with each numbered item. Whenever I apply my numbering style in FM, I should get something like:
" <checkbox> 1. <text> "Use "N:\u2751\ <n+>.\ " for the autonumber format.
"N" Use counter N
"\u2751" One of many checkboxes available in Unicode
"<n+>" increment the counter
"." ordinary period
"\ " non-breaking space
This assumes that you are on FM8 or later, and your Unicode font has that glyph code point populated (Arial Unicode MS does if your font doesn't).
Don't use WingDings (or Zaph Dingbats) anymore. Using codepage overlays has any number of issues, and these two sets of legacy codepage dingbats don't even match each other. -
I seem to have lost my home and bookmarks button along with others from my web browser
I seem to have lost my home and bookmarks buttons, along with others, from my web browser
<u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History...Help)? Hold down the key ( key in OSX) and press the following letters in this exact order: V T M
The Menu Bar should now be displayed permanently, unless you turn it off again (View > Toolbars). Turning the Menu Bar on and off is a new feature in version 3.6.
<u>'''See other bars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
<u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
<u>'''Full Screen mode'''</u>
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''
<u>'''''Other Issues''''': to correct security/stability issues</u>
<u>'''Update Java'''</u>: your version 1.6.0_19; current version 1.6.0.20 (<u>important security update 04-15-2010</u>)
''(Windows users: Do the manual update; very easy.)''
See: '''[http://support.mozilla.com/en-US/kb/Using+the+Java+plugin+with+Firefox#Updates Updating Java]'''
Do the update with Firefox closed. -
I had a drive failure and lost the iWeb file along with other things.
I did manage to save a lot of user file documents but I don't see or
recognize the iWeb site file. It was on a 15" G4 Titanium pb.
I'm trying to find a way, using version 2.0.4 of iWeb on a different
pb to recover the file into the iWeb app or a way to download the site into iWeb.
There are 6 pages of images and text, and it
would be a task for me to recreate the whole thing again. I did
download the site but I don't know how or if I can get iWeb to see it and open it.
Does anyone have any knowledge about this? The link to my site:
<http://web.mac.com/danauerbach>
Any suggestions will be most appreciated.
dan auerbach
[email protected]Unfortunately iWeb cannot read or import previously published files, only generate them. You'll have to recreate your site from scratch.
However, Chapter 2.3 on the iWeb FAQ.org site has tips on using some of the existing files, image, audio, video, etc., from the published site in the recreation of the site.
OT -
AS it stands now, in order to use the calculator that comes with the Dashboard, you cannot read from a list of numbers in, lets say, word or excel. The dashboard is full screen and nothing can stand along side it. Is there a way to get the calculator from the dashboard to appear along with other programs? Can anyone recommend a calculator which will work as a stand alone app?
there is one, just search with spotlight "Calculator".
It works great!
Hope this helps. -
Image on jsp from database along with other elements on image.
Hi All,
I wish to display an image which is stored in my database along with other contents on the page.
I am able to display the image on an entirely new page but I do not wish to display it on a new page. Neither frames etc fit on my current page design.
Kindly helpI have a jsp page ..
I have a byte stream in which i have stored the image from the database (the image is stored in databse as blob) in that jsp.When i use output stream object to display the image from the database (as suggested by many in this forum), the image is displayed in a new page. I wish to display the image along with my other elements like text etc in the same page. -
I just got an iPhone 4S model number MD439LL/A still have the box that it came in along with other info. I can not find Siri. I have looked in settings>general and settings>general>restrictions. Can anyone help me out?
That model is an iPhone 4, not a 4S.
http://support.apple.com/kb/HT3939 -
HT5225 how do I get my icloud a/c onto my mailbox along with other email a/c's ?
How do i get move my icloud a/c onto my mailbox along with other email accounts ?
What Mac OS are you using? It should be setup automatically if using 10.7.2 or later after moving to iCloud.
-
On Itunes, when I press on a movie that I would like to watch it does not come up. All that comes up it a green screen with other lines in it. How can I fix it?
On Itunes, when I press on a movie that I would like to watch it does not come up. All that comes up it a green screen with other lines in it. How can I fix it?
-
Send all line items of a sales order to IPC along with condition lines data
We wrote some pricing routines in R/3, where while doing he calculations for condition line item, we needed to pull in the material information for previous line items. So we exported vbap and imported it inside the routine to be able to have access to all the line items in the sales order. Now, we need to put in the same kind of logic in CRM/IPC. My question is what would be the equivalent of SAP's(import/export) commands for internal tables in case of IPC. I looked at the BADI CRM_COND_COM_BADI but still do not see how I can send all the line items data to IPC. So I guess, the question comes down to, how do I send all the line items of the sales order (whole VBAP in R/3 terms) to IPC along with the condition line data? Can someone please help?
ThanksHi Vaibhav,
If you can get the list of Sales orders which has deleted line items and force completion status. You can manage them in BI via lookup or navigation attribute.
Just my views I am sharing .
Thanks,
KDJ -
Show the PO and Invoice Number along with Distribution Line Info
Does any one have some code that can show the PO and Invoice number along with the distribution line detail?
I'm tring to get to the po.po_vendors for segment1 and po.po_distributions_all but it screws up at the po.po_lines_all table which needs outer joins and it's just not working for me.In case Invoice Distribution is matched to a Purchase Order then
ap_invoice_distributions_all.PO_DISTRIBUTION_ID and ap_invoice_distributions_all.DIST_CODE_COMBINATION_ID is the link to po_distributions_all table
Hope this help
Ashish -
Splitting a shopping cart with one item line into a PO with several lines
Hi,
I am using SRM 6.0, I would like to know whether it is possible from a SC with one item line to generate only one PO but with multiple lines for the same vendor. The quantity would be the same.
ThanksHi,
No this is not available in the standard system. I am guessing you mean you have an SC with 1 item qty 10. And you want to split this into eg two items in the PO QTY 5 per item ? This is not possible in the standard system. An item has a unique GUID assigned so if you were to split this item it would lead to further complications generating follow-on documents and carrying out checks on the items.
I hope this helps,
Kind Regards
Lisa
Maybe you are looking for
-
IMac (Mid 2011) Constantly Crashing
Hi Everyone! I have a mid 2011 iMac and (27 inch, 2.7 i5, 4gb RAM) and it has started crashing regularly on start up/wake and (recently) when I open apps. I don't think it is app specific. I've tried reinstalling OSX, I've scanned the entire system f
-
When I use AIR in the eclipse IDE I cant get any code hinting to show if I am using an AIR application. If its a Flex application its fine. Even if I have two applications open I can just click in the non-AIR window and code hinting is working and cl
-
Library Backup Question/Error
Well, 3 months and 657 CDs later, I just finished moving everything to itunes (YAY). Now I am trying to backup. I started the process and it told me it would take 16 DVDs. So last night I was putting them in and swapping them out every 10 mins or so
-
Statement of account aging query
hi, im using 12.1.3 what is the query to find out the aging of a particular ACCOUNT as shown on footer of STATEMENT OF ACCOUNTS report?
-
ACS 4.2.1 on Win 2008 Svr - CSMon conflict with WMI
Hi all, I currently have 4 servers running ACS v4.2.1 on Windows Server 2008 sp2 (no R2). This operating system is supported according to Cisco documentation. However, there are several Windows event log errors. I want to focus on one issue. The