What are process type and process variant in process chain?

hi all,
Can anyone explain me what is process type and process variant in process chain ?
regds
hari

Hi Hari,
this is standard SAP Links, u may understand ....
http://help.sap.com/saphelp_nw04/helpdata/en/6e/192756029db54192427cf6853c77a7/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/67/13843b74f7be0fe10000000a114084/content.htm
Thanks, KR

Similar Messages

What are the disadvantages and advantages of type coercion??

What are the disadvantages and advantages of type coercion?
anyone? thanks.

What is the relevance of your question about type coercion within the scope of "Advanced [Java] Language Topics"?

What is watch point and break points?what are there types?

what is watch point and break points?what are there types?

Static Breakpoints
Static breakpoints are always user-independent if there is no specification of a user name. Once a user has inserted the statement BREAK-POINT or BREAK name in an ABAP program, the system always interrupts the program at that point for that user or only for the user name. This procedure is only useful in the development phase of an application when program execution is always to be interrupted at the same place. For more information, refer to the chapter Static Breakpoints.
In HTTP sessions, a static breakpoint is skipped if you did not set additional dynamic HTTP breakpoints in the editor of a BSP page. Instead, a corresponding system log entry is written, which can be checked using transaction SM21.
Dynamic Breakpoints
Dynamic breakpoints are user-specific. Therefore, you should use them if you only want the program to be interrupted when you run it yourself, not when it is being executed by other users. All dynamic breakpoints are deleted when you log off from the R/3 System.
Dynamic breakpoints are more flexible than static breakpoints because you can deactivate or delete them at runtime. They have the following advantages:
· You do not have to change the program code.
· You can set them even when the program is locked by another programmer.
· You can define a counter that only activates the breakpoint after it has been reached.
Special dynamic breakpoints are useful when you want to interrupt a program directly before a particular ABAP statement, a subroutine, or an event, but do not know exactly where to find it in the source code. Event here is used to refer to the occurrence of a particular statement, for example, or calling up a method. Special dynamic breakpoints are user-specific. You can only set them in the Debugger. For more information, refer to the chapter Dynamic Breakpoints.
In HTTP sessions, the system stops both at static and dynamic breakpoints if a dynamic breakpoint was set in the editor of a BSP page before program execution.
Watch point are used to put logical break point for a certain condition..Example..If you want to know when the internal table is getting append..Then you have to give the program name and the internal table in the watch point..
Steps to create a watch point.
Start debugging '/H'.
In the debugging screen press the create watch point button in the application tool bar..
In the program give the program name..
in the field give the field name.
In the relational operator given '='
In the comp. field/value give the value ..
Hope this helps..
Regards,
Parvez.

What are filed simbols and filed groups

what are filed simbols and filed groups?
Regards,
pandu.

Hi
Field Symbols
Field symbols are placeholders or symbolic names for other fields. They do not physically reserve space for a field, but point to its contents. A field symbol cam point to any data object. The data object to which a field symbol points is assigned to it after it has been declared in the program.
Whenever you address a field symbol in a program, you are addressing the field that is assigned to the field symbol. After successful assignment, there is no difference in ABAP whether you reference the field symbol or the field itself. You must assign a field to each field symbol before you can address the latter in programs.
Field symbols are similar to dereferenced pointers in C (that is, pointers to which the content operator * is applied). However, the only real equivalent of pointers in ABAP, that is, variables that contain a memory address (reference) and that can be used without the contents operator, are reference variables in ABAP Objects.
All operations programmed with field symbols are applied to the field assigned to it. For example, a MOVE statement between two field symbols moves the contents of the field assigned to the first field symbol to the field assigned to the second field symbol. The field symbols themselves point to the same fields after the MOVE statement as they did before.
You can create field symbols either without or with type specifications. If you do not specify a type, the field symbol inherits all of the technical attributes of the field assigned to it. If you do specify a type, the system checks the compatibility of the field symbol and the field you are assigning to it during the ASSIGN statement.
Field symbols provide greater flexibility when you address data objects:
If you want to process sections of fields, you can specify the offset and length of the field dynamically.
You can assign one field symbol to another, which allows you to address parts of fields.
Assignments to field symbols may extend beyond field boundaries. This allows you to address regular sequences of fields in memory efficiently.
You can also force a field symbol to take different technical attributes from those of the field assigned to it.
The flexibility of field symbols provides elegant solutions to certain problems. On the other hand, it does mean that errors can easily occur. Since fields are not assigned to field symbols until runtime, the effectiveness of syntax and security checks is very limited for operations involving field symbols. This can lead to runtime errors or incorrect data assignments.
While runtime errors indicate an obvious problem, incorrect data assignments are dangerous because they can be very difficult to detect. For this reason, you should only use field symbols if you cannot achieve the same result using other ABAP statements.
For example, you may want to process part of a string where the offset and length depend on the contents of the field. You could use field symbols in this case. However, since the MOVE statement also supports variable offset and length specifications, you should use it instead. The MOVE statement (with your own auxiliary variables if required) is much safer than using field symbols, since it cannot address memory beyond the boundary of a field. However, field symbols may improve performance in some cases.
check the below links u will get the answers for your questions
http://help.sap.com/saphelp_nw04/helpdata/en/fc/eb3860358411d1829f0000e829fbfe/content.htm
http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/field_sy.htm
http://searchsap.techtarget.com/tip/1,289483,sid21_gci920484,00.html
Syntax Diagram
FIELD-SYMBOLS
Basic form
FIELD-SYMBOLS <fs>.
Extras:
1. ... TYPE type
2. ... TYPE REF TO cif
3. ... TYPE REF TO DATA
4. ... TYPE LINE OF type
5. ... LIKE s
6. ... LIKE LINE OF s
7. ... TYPE tabkind
8. ... STRUCTURE s DEFAULT wa
The syntax check performed in an ABAP Objects context is stricter than in other ABAP areas. See Cannot Use Untyped Field Symbols ad Cannot Use Field Symbols as Components of Classes.
Effect
This statement declares a symbolic field called <fs>. At runtime, you can assign a concrete field to the field symbol using ASSIGN. All operations performed with the field symbol then directly affect the field assigned to it.
You can only use one of the additions.
Example
Output aircraft type from the table SFLIGHT using a field symbol:
FIELD-SYMBOLS <PT> TYPE ANY.
DATA SFLIGHT_WA TYPE SFLIGHT.
ASSIGN SFLIGHT_WA-PLANETYPE TO <PT>.
WRITE <PT>.
Addition 1
... TYPE type
Addition 2
... TYPE REF TO cif
Addition 3
... TYPE REF TO DATA
Addition 4
... TYPE LINE OF type
Addition 5
... LIKE s
Addition 6
... LIKE LINE OF s
Addition 7
... TYPE tabkind
Effect
You can define the type of the field symbol using additions 2 to 7 (just as you can for FORM parameters (compare Defining the Type of Subroutine Parameters). When you use the ASSIGN statement, the system carries out the same type checks as for USING parameters of FORMs.
This addition is not allowed in an ABAP Objects context. See Cannot Use Obsolete Casting for FIELD SYMBOLS.
In some cases, the syntax rules that apply to Unicode programs are different than those for non-Unicode programs. See Defining Types Using STRUCTURE.
Effect
Assigns any (internal) field string or structure to the field symbol from the ABAP Dictionary (s). All fields of the structure can be addressed by name: <fs>-fieldname. The structured field symbol points initially to the work area wa specified after DEFAULT.
The work area wa must be at least as long as the structure s. If s contains fields of the type I or F, wa should have the structure s or at least begin in that way, since otherwise alignment problems may occur.
Example
Address components of the flight bookings table SBOOK using a field symbol:
DATA SBOOK_WA LIKE SBOOK.
FIELD-SYMBOLS <SB> STRUCTURE SBOOK
DEFAULT SBOOK_WA.
WRITE: <SB>-BOOKID, <SB>-FLDATE.
Field Groups
Field groups use a mechanism called extract to store and process data. You define a header and then line structure and the fields that you would like those to have and process them fairly similarly to a table; unless you are dealing with millions of records.
Since internal tables have fixed line structures, they are not suited to handle data sets with varying structures.
An extract is a sequential dataset in the memory area of the program. You can only address the entries in the dataset within a special loop. The index or key access permitted with internal tables is not allowed. You may only create one extract in any ABAP program. The size of an extract dataset is, in principle, unlimited. Extracts larger than 500KB are stored in operating system files. The practical size of an extract is up to 2GB, as long as there is enough space in the file-system.
Reward points if this explains well
Kiran

LSMW: What are Fixed Values and Translations for?

Hi,
I'm working with LSMW and I don't know what are Fixed Values and Translations for? They are on the "Maintain Fixed Values, Translations, User-Defined Routines" step.
Thanks in advance,
Gerard

this is the step,we can process the reusable rules of a project.
Fixed value: Here you can specify length, type, flag for lowercase/uppercase and value in addition to the description.
this is nothing but CONSTANTS in your report programs.
Translation: Here you can enter information on the source field and the target field.
for example, your input file language value will be 2 characters and we need to send only 1 for LANG in SAP.
so here we have to do the translation of 2chars to 1 char.
so, we will give these set of values in this step.
Message was edited by: Srikanth Kidambi

What are replications objects and subscriptions???

Hello All,
I am working with CRM 5.0
I want to know what are replications objects and subscriptions and how it is work with sites and BDocs? The process is not clear to me and how is the relationship between them?
Regards
Jacopo Francois

Hello Jacopo,
The CRM Middleware course material CR500/CR540/CR550 details out the concepts of a Replication Obj,Publication and Subscription.
Let me try and illustrate this concept with a real-world example. This is normally the example I provide whenever I train employees.
What do you do when you want to subscribe for SAP Netweaver magazine published from SAP Press?
1) SAP Press publises a number of SAP magazines. So, first you select the publication of your choice. Your publication = "SAP Netweaver".
2) Next, you have to subscribe for it in the website by furnishing your credit card details, shipping address and the duration of your subscription. So, that becomes your subscription. So, a publication can have many subscriptions (sent by many people)
The replication object is just the abstraction which collects all the publications and their corresponding subcriptions and relates them a particular Bdoc type. Normally, the name of a replication object = Name of the Bdoc type. E.g. BUPA_MAIN. Replication objects can be bulk objects or simple intelligent objects depending on whether mass data or filtered data is desired. Naturally, there will not be any subscriptions for a bulk replication object.
Now, once you have created a site and have done its configuration, you can associate the site to a number of replication objects depending on what type of data would the site be interested in.
Hope you are now able to figure out the meaning of these MW terms and understand the relationship between them.
Please reward with points if this helps!
Thanks,
Sudipta.

What are the type of delta A, E,D GIVE DETAILS ABOUT SCREENSHOTS

what are the type of delta A, E,D GIVE DETAILS ABOUT SCREENSHOTS

Hi,
Delta Process
http://help.sap.com/saphelp_bw33/helpdata/en/84/81eb588fc211d4b2c90050da4c74dc/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a65dce07211d2acb80000e829fbfe/frameset.htm
Re: Delta
Delta Mechanism?
Help with Delta Init and then Delta (how to)
Which delta mechanism?
Delta mechanisim for extractors
/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part2
/people/swapna.gollakota/blog/2008/01/14/one-stage-stop-to-know-all-about-bw-extractors-part1
Thanks,
JituK

What are application events and system events? what is difference between ?

what are application events and system events? what is difference between ?

The Control Framework triggers the event irrespective of the screen flow logic, that is, without processing the PAI and PBO events. These events are called system events. This type of event processing is the default setting.
·The Control Framework processes the PAI module after an event. In this case, you must call method CL_GUI_CFW=>DISPATCHto initiate the event handling of ABAP Objects. These events are called application events.
Application Event : you must first register the events for the control instance and consequently on the frontend.
like..
DATA events TYPE cntl_simple_events.
DATA wa_events TYPE cntl_simple_event.
1. Using field
appl_event , define the event as an application event:
wa_events-appl_event = 'X'.
System events are passed on irrespective of the flow logic of the relevant screen.
1. Change the value of field
wa_events-appl_event in the PBO module:
wa_events-appl_event = SPACE.
Edited by: Devi Raju on Jul 1, 2008 1:48 PM

What are the advanteges and disadvanteges of using pl/sql over hibernate

i knwo that pl/sql are well structure and provide a lot of functionalities with oracle databse , but my question is the hibernate might give some advnateges of scalability over pl/sql.
so what are the advanteges and disadvanteges of using pl/sql over hibernate?
and does oracle recommend using hibernate for connecting JSP with oracle 11i , or it is better to connect the JSP pages with oracle databse using pl/sql ?

812643 wrote:
but if i search for the diferencess then there are a lot of opinions about this ..., specially when they say that with hibernate you can integrate with any DB , and it provides object printed architecture, etc.All databases are not equal. This is a basic and fundamental fact. SQL-Server is not Oracle. Oracle is not SQL-Server. As it is the case with Sybase, Ingres, DB2 and other database products. They are all different. And there are some very core differences between them.
So how would a product like Hibernate treat these database products with their differences? By using the lowest common denominator. Which means your expensive database product is dumbed down - and even MS Access will likely have better and more features.
You also need to decide what is the "permanent" part in your architecture. What is going to the core? What is the expensive part? The app server (with Hibernate)? Or the database server?
What are you likely to change next year? The app server server? Or the database server?
In the vast majority of cases, the core is the database server. That is your biggest expense and investment. As it should be - as it holds that which is most precious to business, data. You want to ensure the integrity of that data. The accuracy of that data. Make sure that it can be easily backed up and recovered. Is flexible to use. Etc. Etc.
The database server is the core - and that is where you need to realise your return on investment. By using the database server to its full extent.
Hibernate does not do that. And in that respect, it is junk.
Why does it not do that? Because many Java developers are totally and fully clueless about what database servers are and how to use them. And want to use them as little plug-in black boxes - bit buckets that are only there to provide a data persistence layer. Instead of using the database server to its full extent, they instead use Hibernate, and try to do their own "+database thing+" in the app layer - and do it poorly and with utter lack of any scalability. (and no, only ignorant Java heads think that scalability means throwing more money and h/w at it)
My largest database processes billions of rows per day, every day, 356 days a year (between 350 to 450 million new inserts into a single table per day). And have been for several years now. It does so using PL/SQL. Using Oracle to its full extent. Then there are Java heads that cannot even design and code an app that effectively process 1% of this volume... and grasp at straws like Hibernate and other Java cr@p to "fix" this - when the actual problem is their total lack of ignorance in how to use and scale the database server.
Hibernate is trash - and a symptom of Java developers's ignorance of database technology.

What are dependency types?

What are dependancy types in variant configuration ?
& what they indicate?
1. Precondition
2. Selection Condition
3. Action
4. Procedure
5. Constraint

Dependancy types in Variant configuration:-
Dependencies let you do the following:
Describe the interdependencies between characteristics and characteristic values
Control which components are selected from a bill of material (BOM) and which operations are selected from a task list
Change the values of fields in BOM items and operations during configuration
1. Precondition
You can use preconditions to hide characteristics and characteristic values that are not allowed and thereby ensure that the configuration of an object is consistent.
2. Selection Condition
You can use selection conditions to ensure that all the objects relevant to a variant are selected:
Selection conditions determine which variants require a specific component or operation
Selection conditions determine when it is mandatory to assign a value to a characteristic
You can allocate selection conditions to the following objects:
Characteristics
BOM items
Operations in task lists
Sub-operations
Sequences of operations
Production resources/tools (PRTs)
3. Action
You use actions to infer values for characteristics. You cannot overwrite values that are set by an action.
You can also use actions to change field values in BOM items or operations in routings.
Now in ECC6 this is Obsolete
4. Procedure
You can use procedures to infer values for characteristics
You can assign procedures to the following objects:
The characteristic value that triggers the procedure
The characteristic that triggers the procedure
The configuration profile of the configurable object
5. Constraint
This dependency type is mainly for intensively interactive configuration tasks and for configuration tasks in which you need to take into account the dependencies between the characteristics of several objects. The main purpose of a constraint is to monitor the consistency of a configuration.
Regards
Samunder Singh
U can also refer the link
http://help.sap.com/erp2005_ehp_04/helpdata/EN/92/58c228417011d189ec0000e81ddfac/frameset.htm

What are data types that can be stored on TemSe?

What are data types that can be stored on TemSe(Storage for Temporary Sequential Data)?
Moderator message: please search for available information/documentation.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
[Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
Edited by: Thomas Zloch on Sep 18, 2011 10:04 PM

Hi
SAP Library: TemSe Data Store:
There are the following TemSe objects, among others:
·        Spool requests (TemSe Name: Spool....)
·        Job logs (TemSe Name: JOBLG...)
·        Objects from other applications, such as Human Resources (TemSe Name: HR)
·        An object whose name begins with KONS; this is object is constantly used by report RSPO1043 and should never be deleted (SAP Note 98065)
Sandra

What are the tables and fields in fico & sd module

what are the tables and fields in fico & sd module

Hi,
 Sales and Distribution:
Customers KNA1 General Data
KNB1 Customer Master Co. Code Data (payment method, reconciliation acct)
KNB4 Customer Payment History
KNB5 Customer Master Dunning info
KNBK Customer Master Bank Data
KNKA Customer Master Credit Mgmt.
KNKK Customer Master Credit Control Area Data (credit limits)
KNVV Sales Area Data (terms, order probability)
KNVI Customer Master Tax Indicator
KNVP Partner Function key
KNVD Output type
KNVS Customer Master Ship Data
KLPA Customer/Vendor Link
Sales Documents VBAKUK VBAK + VBUK
VBUK Header Status and Administrative Data
VBAK Sales Document Header Data
VBKD Sales Document Business Data
VBUP Item Status VBAP Sales Document Item Data
VBPA Partners
VBFA Document Flow
VBEP Sales Document Schedule Line
VBBE Sales Requirements: Individual Records
SD Delivery DocumeLIPS Delivery Document item data, includes referencing PO
LIKP Delivery Document Header data
Billing Document VBRK Billing Document Header
VBRP Billing Document Item
SD Shipping Unit VEKP Shipping Unit Item (Content)
VEPO Shipping Unit Header
Financial Accounting
FBAS Financial Accounting Basis
BKPF Accounting Document Header BUKRS / BELNR / GJAHR
BSEG Accounting Document Segment BUKRS / BELNR / GJAHR / BUZEI
BSIP Index for Vendor Validation of Double BUKRS / LIFNR / WAERS / BLDAT /
 Documents XBLNR / WRBTR / BELNR / GJAHR / BUZEI
BVOR Inter Company Posting Procedure BVORG / BUKRS / GJAHR / BELNR
EBKPF Accounting Document Header (docs from GLSBK / BELNR / GJHAR / GLEBK
 External Systems)
FRUN Run Date of a Program PRGID
KLPA Customer / Vendor Linking NKULI / NBUKR / NKOAR / PNTYP
 / VKULI / VBUKR / VKOAR
KNB4 Customer Payment History KUNNR / BUKRS
KNB5 Customer Master Dunning Data KUNNR / BUKRS / MABER
KNBK Customer Master Bank Details KUNNR / BANKS / BANKL / BANKN
KNC1 Customer Master Transaction Figures KUNNR / BUKRS / GJHAR
KNC3 Customer Master Special GL Transactions KUNNR / BUKRS / GJAHR / SHBKZ
 Figures
LFB5 Vendor Master Dunning Data LIFNR / BUKRS / MABER
LFBK Vendor Master Bank Details LIFNR / BANKS / BANKL / BANKN
LFC1 Vendor Master Transaction Figures LIFNR / BUKRS / GJHAR
LFC3 Vendor Master Special GL Transactions LIFNR / BUKRS / GJHAR / SHBKZ
 Figures
VBKPF Document Header for Document Parking AUSBK / BUKRS / BELNR / GJHAR
FBASCORE Financial Accounting General Services Basis
KNB1 Customer Master (Company Code) KUNNR / BUKRS
LFA1 Vendor Master (General Section) LIFNR
LFB1 Vendor Master (company Code Section) LIFNR / BUKRS
SKA1 G/L Account Master (Chart of Accounts) KTOPL / SAKNR
SKAT G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR
 Description)
MAHNS Accounts Blocked by Dunning Selection KOART / BUKRS / KONKO / MABER
MHNK Dunning Data (Account Entries) LAUFD / LAUFI / KOART / BUKRS /
 KUNNR / LIFNR / CPDKY / SKNRZE /
 SMABER / SMAHSK / BUSAB
FI-GL-GL (FBS) General Ledger Accounting: Basic Functions- G/L Accounts
SKAS G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR / SCHLW
 Key Word list)
SKB1 G/L Account Master (Company Code) BUKRS / SAKNR
FI-GL-GL (FBSC) General Ledger Accounting: Basic
 Functions - R/3 Customizing for G/L Accounts
FIGLREP Settings for G/L Posting Reports MANDT
TSAKR Create G/L account with reference BUKRS / SAKNR
FI-GL-GL (FFE) General Ledger Accounting: Basic
 Functions - Fast Data Entry
KOMU Account Assignment Templates for G/L KMNAM / KMZEI
 Account items
FI-AR-AR (FBD) Accounts Receivable: Basic Functions - Customers
KNKA Customer Master Credit Management : KUNNR
 Central Data
KNKK Customer Master Credit Management : KUNNR / KKBER
 Control Area Data
KNKKF1 Credit Management : FI Status data LOGSYS / KUNNR / KKBER / REGUL
RFRR Accounting Data A/R and A/P RELID / SRTFD / SRTF2
 Information System
FI-BL-PT Bank Accounting: Payment (BFIBL_CHECK_D) Transactions General Sections
PAYR Payment Medium File ZBUKR / HBKID / HKTID / RZAWE /
 CHECT
PCEC Pre-numbered Check ZBUKR / HBKID / HKTID / STAPL
FI-BL-PT-AP(FMZA)Bank Accounting: Payment Transactions Automatic Payments
F111G Global Settings for Payment Program for MANDT
 Payment Requests
FDZA Cash Management Line Items in Payment KEYNO
 Requests
PAYRQ Payment Requests KEYNO
Hope this solves your concern...
Regards,
Habeeb
Assign points if helpful

What are the types of routines

hi experts
can some one give me clear idea on what are the types of routine we use in sap bi
with scenarios?
what is CMC?
Please search the forum before posting a thread
Edited by: Pravender on Apr 7, 2011 12:56 PM

Hi,
In BI 7.0 we have the following types of routines.
1. Start Routine.
2. End Routine.
3. Expert Routine.
This routines can be used in the complex scenarios and to improve the performance of the loading time.
I am elaborating the routine in details here.
1. Start Routine : whenever you create a start routine, the system will automatically give you some predefined data declaration like structure of the type of your source. In start routine you can declare a local data declaration and Global data declaration also. I will give one example.
Suppose you are creating Start routine for transformation from Datasource to DSO. Then when you create start routine the System will provide you a structure of your datasource. By using this structure it will also define an internal table which will be used as changing parameter of a method of a class. It is this changing parameter where you have to do all sorts of manipulation. The changing parameter is both export as well as import parameter. This changing parameter will contain data in the package wise.
In start routine you can also read some database table and store that data into an internal table and this internal table data can then be read in the field level routine. In this case it acts as a substitute of master data look up in the field level transformation.
2. End routine : The end routine is also same as start routine, the only difference is that here the system will provide you with a structure of the target not the source. and rest is all same as start routine.
3. Expert routine : This is the strongest and most complex of all routines. This allows you to design the entire data flow of the transformation. If you create an Expert routine the system will automatically delete all the field level mapping, Start routine and end routine. You also have to take care of the error handling and monitoring
assign points if it helps
Thanks & Regards,
santo

What are the types of lookandfeel is available in oracle forms?

Hi Gurus,
What are the types of lookandfeel is available in oracle forms?
And where i can see?For Example: &lookandfeel=oracle
Regards
Gopinath M

Rosario, don't feel bad -- English is my only language, and those acronyms give me trouble sometimes, too. The quickest and easiest way to find out what they mean is to go to google.com and type in the letters. That is what I do.

What are the advantages and disadvantages of suppressed and unsuppressed content?

what are the advantages and disadvantages of suppressed and unsuppressed content?

Hi Surya,
surya n wrote:
what are the advantages and disadvantages of suppressed and unsuppressed content?
Are you referring to compressed files in your statement?
If yes, then let me give you a general idea about it -
Compressed file occupy less memory space as compared to its uncompressed counterpart, and hence can be uploaded/downloaded faster than the uncompressed one.
Moreover Compressed files are less vulnerable to Malwares and Trojans, provided it is Locked and encrypted as well, Uncompressed files are more vulnerable to Malwares and viruses in general.
I would love to help you with your query however i need to know that in which context you are asking this question so that i can point you in the right direction. Moreover please let me know if you are facing any type of Technical issue in any Adobe Product or Online service.
Regards,
Rahul

What are process type and process variant in process chain?

Similar Messages

Maybe you are looking for