What are Sys Prefs for View desktop on TV monitor

I have the cable connected to the computer and a flat screed TV.
i get the startup display on the monitor, the mouse tracks and the screen saver works but the screen saver pictures are not the same.
I cannot get the computer desktop on the TV monitor so that I can use the computer super drive as a DVD player to watch a movie.
Is there a specific setup fot the system preferences?

I am assuming you have a mini-displayport/thunderbolt to HDMI adapter and of course a HDMI cable.
Set the TV to the input you connected the HDMI cable to.
On your computer, if you open the Displays preferences and do not see an Arrangement tab (or there is an Arrangement tab that shows only a single monitor) then there is something physically wrong with your connection. Try clicking Detect Displays just to see if the computer can now sense the presence of the connection. Check your cables and make sure the mini-displayport plug is pushed firmly in so that essentially all the metal part disappears inside the socket. Mini-displayport plugs can be a little tricky in that you need to make sure the plug is fully seated in their socket.
If you do have an Arrangement tab, and it shows two screens, then click Gather Windows to bring the TV's Displays preferences on to your main screen if the TV is not yet showing an image. Set the proper resolution (probably 720p, 1080i, or 1080p). Set the refresh rate (probably 60Hz) if that preference is shown. You should see a picture at this point. I recommend turning off mirrored displays if it is enabled (more about this below).
You may have to play with the underscan/overscan settings on your TV and the displays prefs for the TV if the picture is too small or larger for the TV screen.
Also, you need to set your Sound preferences to output to the HDMI connection. If the MBP doesn't support audio through the mini-displayport then you will need to connect your stereo audio out to your TV (3.5 mm stereo jack for the compter to usually RCA jacks on the TV).
Arrangements, Menu Bar, Extended Displays, and Mirrored Displays
When you have multiple monitors (and the TV is considered just a monitor) only one monitor is designated as the "main" monitor. That's the one with the menu bar.
If you look at the Arrangement tab in your Displays preferences you will see both monitors. One will have a little white "menu bar" on it. That's your main monitor. You can drag the little menu bar to the other monitor if you wish to make it the main monitor.
You cannot make both monitors main monitors. However there is a third party app called MenuEverywhere that allows you to do that (it has mixed reviews).
Your two monitors can be spatially arranged with the Arrangement in Displays as well. Drag the monitors around each other to define their relationship. Then you can drag the mouse or windows across with in that "space". This is extended desktop mode and I recommend that to be able to use all the available screen real estate. However there is a checkbox in the Arrangement to run in mirrored mode. Now the two images are identical on both screens albeit the max screen size is determined by the smallest screen in the mirrored set. You would of course have the menu bar on both screens since they are mirrors of each other. But I think it's a waste of good screen real estate.

Similar Messages

What are the options for viewing photos with Apple TV 2?

I have an old Apple TV, and load the family photos on the Apple TV itself. On the Apple TV 2, I know you can connect to MobileMe and Flickr.
Aside from MobileMe and Flickr, are there other options for viewing photos on the new Apple TV? Can you stream them from a Mac, or can you stream them from an iPhone/iPad?
If so, how is this initiated from the Apple TV, Mac, or iPhone/iPad?

You can stream from a Mac via itunes selection (iPhoto events or a folder) - it has 8GB of solid state temporary storage, but quite how things are cached/flushed from here is a bit of a mystery - you cannot say designate 2GB to hold photos or prioritise photos over other material.
Even rentals seem to flush if you've watched them and they haven't expired - relative fell asleep during a rental yesterday so i suggested she watched it today and it downloaded from scratch again, and the AppleTV hadn't had anything but music playing in the interim. Silly this really. There's a post on another section where someone used 17GB of their data allowance to watch a HD movie as it kept reloading!
Yes you can stream photos from iPod/iPad using Airplay, but to be honest i don't think ATV2 offers that much over ATV1 for photos (yet anyway), and in some ways it's inferior.
ATV2 is far more responsive/uses less power etc but I'm not convinced you get anything groundbeaking unless you have a lot of guests who could use it via Airplay from their iphones (and with ipads currently without cameras, photos would have to come from somewhere else in the first place).
Message was edited by: Alley_Cat

What are you using for Fan speed AND temp monitor?

Thanks to Bosskiller, my rig seems to be running a bit stabler now! Knock on wood. Is there any program other than MSI's core center that monitor fan speed AND temp? I used to use MBM but it's no longer being supported and CoreCenter doesn't seem all that popular here?

Quote from: BOSSKILLER on 25-September-08, 00:42:40
http://www.cpuid.com/hwmonitor.php
http://www.alcpu.com/CoreTemp/
Actually how accurate is the temp reading on HWMonitor for your MSI board? One thing I noticed is that w/ Coretemeter the temp reading was around 48-50c on Rig#1 and almost 58-60c on Rig#2 (That's my HTPC w/ EXTREMELY tight spacings so still work in progress as far as cooling's concern!) but using HWMonitor I got 31c CONSISTENTLY on both rigs! I'll love to think that I'm indeed running this cool but feeling the exhaust air, I think this 31c reading is not real...

What are the announcements for renting VPS?

What are the announcements for renting VPS? For details, understand VPS and make the choice of rental; for Taiwan VPS and Hong Kong VPS, without records, unlimited contents, wider range, and more efficient experience. Your server will show its excellence with the advantages.
Most station agents become less inclined to virtual hosting, for national space, domain name records are needed, which waste the time; for overseas hosting such as Korea hosting, US hosting, no records, but slower speed than national space; therefore, more and more station agents prefer servers, but because the price of servers are too high, they turn their focus on VPS.
The following are the announcements:
1.Open remote desktop lander:
Start-run-mstsc or start-procedure-nearby-remote desktop connect
2.Several conditions for account halt:
First, client side login cause account halt
Second, certain account quits the remote control in midway when it runs routine
Third, certain routine is restricted by synchronous operation of system administrator.
3. Not install the third party firewall
If you need firewall, please use windows firewall, the third party firewall in VPS will cause system collapse and data loss, the system automatically obtains the newest windows patches and install itself, which do not require human operation. Installing system patches in VPS sometimes will heavily lead to VPS collapse and data loss.
Do not modify remote desktop port.
Because of the specialty of VPS system, default remote desktop port is 3389, do not modify randomly, or the remote connection will be out of work.
4. Except some special conditions that user registration is needed for certain procedure, when the remote connection has been close down, do not forget logout user to save memory resource, and prevent the loading connection next time, if it happens, reboot VPS.
5. VPS has been set with relative security when it was paid, with high security. It suggests that do not open firewall randomly, if you open it by your own, the following ports should be opened: 21(FTP), 3389(remote connection), 80(website http), 3306(MySQL), 1433(SQL Server). Timely check whether there is suspicious account or system log, download 360 safety guard to avoid these files and process.
6. Try not to modify registry hand-actuated, ensure the reboot of VPS. Modify remote ports please add the modified port in firewall first, and then reboot.
7.Modify IIS installation files, backup these files, and then modify them with the software that can keep the file layout, prevent these files from destroying IIS.
8.Website service of VPS and FTP service of IIS are default to open hand-actuated, set Web Publishing Service as automatically if you are station agent. If you often use FTP service of IIS, please set FTP Publishing Service as automatically, i.e. reboot it automatically. If you use serv-u, tick all the system service terms. In the terms of security and resource consumption , it suggests that those users who seldom use FTP do not set it as automatically.

Hi there
"So for ALL the apps, the annual monthly fee is £46.88, but you can rent occasionally for £70.32 pm.... ?" Correct
£17.58 single app plan requires an annual commit - it's £27.34 for the month-to-month plan without annual commit.
Thanks
Bev

What are the settings for datasource and infopackage for flat file loading

hI
Im trying to load the data from flat file to DSO . can anyone tel me what are the settings for datasource and infopackage for flat file loading .
pls let me know
regards
kumar

Loading of transaction data in BI 7.0:step by step guide on how to load data from a flatfile into the BI 7 system
Uploading of Transaction data
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( Transaction data )
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to create ODS( Data store object ) or Cube.
Specify name fro the ODS or cube and click create
From the template window select the required characteristics and key figures and drag and drop it into the DATA FIELD and KEY FIELDS
Click Activate.
Right click on ODS or Cube and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.
4. Monitor
Right Click data targets and select manage and in contents tab select contents to view the loaded data. There are two tables in ODS new table and active table to load data from new table to active table you have to activate after selecting the loaded data . Alternatively monitor icon can be used.
Loading of master data in BI 7.0:
For Uploading of master data in BI 7.0
Log on to your SAP
Transaction code RSA1LEAD YOU TO MODELLING
1. Creation of Info Objects
In left panel select info object
Create info area
Create info object catalog ( characteristics & Key figures ) by right clicking the created info area
Create new characteristics and key figures under respective catalogs according to the project requirement
Create required info objects and Activate.
2. Creation of Data Source
In the left panel select data sources
Create application component(AC)
Right click AC and create datasource
Specify data source name, source system, and data type ( master data attributes, text, hierarchies)
In general tab give short, medium, and long description.
In extraction tab specify file path, header rows to be ignored, data format(csv) and data separator( , )
In proposal tab load example data and verify it.
In field tab you can you can give the technical name of info objects in the template and you not have to map during the transformation the server will automatically map accordingly. If you are not mapping in this field tab you have to manually map during the transformation in Info providers.
Activate data source and read preview data under preview tab.
Create info package by right clicking data source and in schedule tab click star to load data to PSA.( make sure to close the flat file during loading )
3. Creation of data targets
In left panel select info provider
Select created info area and right click to select Insert Characteristics as info provider
Select required info object ( Ex : Employee ID)
Under that info object select attributes
Right click on attributes and select create transformation.
In source of transformation , select object type( data source) and specify its name and source system Note: Source system will be a temporary folder or package into which data is getting stored
Activate created transformation
Create Data transfer process (DTP) by right clicking the master data attributes
In extraction tab specify extraction mode ( full)
In update tab specify error handling ( request green)
Activate DTP and in execute tab click execute button to load data in data targets.

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

What are the steps for using the backup files to reload data to my blackberry curve (8310, i think)?

Connect BB to PC. On 'Desktop Manager'>Backup & Restore tab>Click Restore. Double click .ipd file (backup file created from Desktop Manager).

What are my options for a data plan + upgrade?

So my old phone (Samsung Intensity) broke today, and I'm looking to upgrade to a smartphone. I would prefer an iPhone, but really it's not that big of a deal if I get a Droid. I'm eligible for an upgrade currently. What are my options for a smartphone and a data plan? I'm looking for what's the cheapest option as far as this goes. People tell me an iPhone is free with an upgrade, and that the cost is $20 a month, but I just want to be sure.

Unless you have an old calling plan, you should be able to add a tiered data plan for your new smartphone (i.e., $30 for 2 GB). If you switched to the Share Everything plan, your monthly cost would be $40 line access + at least $50 for 1 GB data (includes unlimited minutes/texts and mobile hotspot, although the hotspot data usage comes out of your data plan), plus, of course, taxes/fees (and insurance, if applicable).
You can check pricing for phones via your on-line MyVerizon account if you click on the Upgrade button. If you are mainly interested in free phones (keep in mind that there's a $30 upgrade fee), there's the Nokia Lumia 822, Spectrum 2, Droid Razr M, iPhone 4, Galaxy Stellar, Marauder, Rhyme, and the Lucid. Several of those are 3G phones.

4.6C to ERP6.0 Upgrade - what are the recommendations for Unicode and Java

Hi All,
Forgive such a basic question.
We are just beginning to look at our ERP6.0 upgrade and am unclear whether we should convert to unicode at the same time, and also what are the uses for the Java stack.
Unicode?
We are a single language Latin-1 site so don't need Unicode. However will it become mandatory eventually? Are we better, if we have the opportunity now, just to convert. Also I believe the Java stack is only Unicode. Does ASCII ABAP and Java Unicode complicate things?
Java?
Will we need it? We are proposing a technical upgrade from our 4.6c Javaless environment. Where does Java come in to play in ERP6.0? Doesn't it increase greatly the iSeries HW requirements? (I'm looking at a 2 way 550 at the moment)
Look forward to hearing your views.
Regards
Steve

Hi Stephen,
at the moment, in a latin-1 environment Unicode is for old customers not a requrirement. This might change in 5-10 years ...
Java: No problem at all with ASCII (in latin-1 environments)
=> there is no need for you, but you could go for it. We did several Unicode conversions already and these Latin-1 conversions are pretty easy and simple especially on iSeries, because of the special InPlace Unicode Conversion.
... but this can be done at any time ...
Regards
Volker Gueldenpfennig, consolut.gmbh
http://www.consolut.de - http://www.4soi.de - http://www.easymarketplace.de

What are bandwidth requirements for FaceTime?

I can't get FaceTime to work. A 'Ping' check tells me that I've got 20Mb download and 1 Mb upload. Is this enough ? What are bandwidth requirements for FaceTime? If I've theoretically got a fast enough connection, then where is the restriction of bandwidth occurring?   How can I find out whether the problem is inside my computer, or on the net?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Try to make a call. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

What are the Prerequisites for MDM

HI,
I would like to know what are the prerequisites for SAP MDM

Hi,
for MDM 5.5 installation, requirements are:
MDM 5.5 Server:
--> Microsoft windows 2000/ 2003/xp
--> Linux -- kernel version 2.4 or higher with the following
libstdc ++.so.5 or higher
glibc 2.2 or higher
 sun Solaris - 8 - sunos 5.8 rev .02/02 or later
DBMS:
--> Microsoft SQL server 2000 ( version 8.0 sp3)
--> Oracle 9.2
--> IBM DB2 8.1 version
MDM 5.5 console/clients:
--> Windows Xp, 2000, 2003 all versions
MDM 5.5 API's:
--> COM
--> JAVA
Desktop Publishing:
--> Quark Express (windows and Macintosh)
--> Adobe In Design (windows and Macintosh)
Installation: MDM 5.5 console/clients:
--> Windows Xp, 2000, 2003 all versions
1.First we have to maintain Database server.(Sql 2000, Oracle 9i)
2. We have to install MDM Server.
3. After that install GUI clients.
3.1. Console
3.2.Importmanager
3.3.Datamanger
3.4.Syndicator
4. Import manager Batch server, Syndication Batch server.
5. Next coming to repositories go to Business content folder And select repositories .
6.Program files --> sap MDM 5.5 --> Server > Archives> Put the repositories.
7. In Console Mount the MDM server.
8. Unachieve the repositories based upon Requirement
Regarding this Any issues please let me know.I will clarify ur doubts.
For MDM Learning
https://www.sdn.sap.com/irj/sdn/mdm-elearning
Please go through this link
Regards
Hari

What are good apps for students

What are good apps for students
Please give as many as you can
Regards, Me

Well, there are literally hundreds of apps for writing.
You can start with apples apps then go from there
Microsoft office compatible apps and services
Apple's iWork apps
http://www.apple.com/iwork/
3rd party Microsoft equivalent apps
http://www.polarisoffice.com/en/iOS.asp
http://www.alwaysonpc.com/aboutOpenOffice.php
http://itunes.apple.com/sg/app/quickoffice-pro-hd-edit-office/id376212724?mt=8&l s=1
http://itunes.apple.com/sg/app/office2-hd/id364361728?mt=8&ls=1
http://itunes.apple.com/sg/app/documents-to-go-premium-office/id317107309?mt=8&l s=1
http://itunes.apple.com/sg/app/polaris-office/id513188658?mt=8&ls=1
Others, including cloud based
Microsoft Office Web Apps:These are versatile apps since they can be used on or off the cloud. Expect a simplified experience to the full version of Microsoft Office suite.
OnLive: Access both a degree of Windows desktop functionality and full Windows versions of Microsoft Office Suite.
CloudOn: This was one of the first solutions for iOS productivity. Syncing with Dropbox, CloudOn offers a more complete Windows desktop. The tradeoff is it also offers a more pared-down version of Word, Excel, and PowerPoint.
rollApp: Offers Open Office programs for iOS, also utilizing Dropbox.
LogMeIn: Remotely access your home computer's desktop from your iOS device. This solution requires coordination of logins, settings, and hookups. The free version does not offer file transfer, but you can get a separate, free app for that.
Google Docs: Now featuring Google Drive for iOS, users no longer have to battle with pressing the Refresh periodically to initiate syncing. This makes collaboration much smoother, resulting in a stronger office productivity product.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

I´ve bought the new IPad3, what a disappointment the 3G does not work, no Internet available, APPLE what are you doing for the all the people in Germany who bought the new IPad3? I´m still an Apple fan, all my products are from Apple but I need a solution

I have been waiting since months for the new IPad4G 64 Gbt. ON recommendation of Apple Support I have changed my IPad 4G last week in the hope that something was wrong with the firts one I bought.
The one I have now has the same problems. WiFi is working however 4G not at all. Apple what can I do? What are you doing for the thausands of German Apple fans who have bought a IPad4G and can not use it. We need a solution NOW. I´m working with this tool and need to be able to rely on it.
Thanks for a feed back.

JKerki wrote:
They had not heard about the problem, however made no problem to change it for an other one. Apple Support Germany pretendet not to know about this problem. However the web is full of complaints.
It would be advisable for Apple to react officially on it. € 799, - for something that doesn´t function is no fun :-((
Isn't replacing your iPad Apple "officially" acting on it?

What are the steps for loading master data

Hello
what are the steps for loading master data? i want to learn about loading all master data and the steps to choose the best way to load the data.
if anyone has documents please send me the documents i will be really greatful
[email protected] thanks everyone
Evion

Hi Heng,
Download the data into a CSV file.
Write a program using GUI_UPLOAD to upload the CSV file and insert records.Chk the below link for example
http://www.sap-img.com/abap/vendor-master-upload-program.htm
Reward Points for the useful solutions.
Regards,
Harini.S

What are Sys Prefs for View desktop on TV monitor

Similar Messages

Maybe you are looking for