What are the AM Tuning parameters need to be set for 500 concurrent users

Hi All,
We are using JDEVADF_11.1.1.5.0.
What are the exact AM parameters(Pooling and Scalability tab) to be set when we planned for 500+ concurrent users?
Along with this do we need to set any parameters at weblogic server level, if any please give inputs.
Any input's would be appreciated.
Thanks in advance.
Regards,
Dinesh

We can?t give you exact numbers as there are many factors influencing the performance. In hte end you have to make a load test to find the right set of parameters. A good starting point is Andrejus's blog Andrejus Baranovskis's Blog: Stress Testing Oracle ADF BC Applications - Internal Connections and  Andrejus Baranovskis's Blog: Stress Testing Oracle ADF BC Applications - Do Connection Pooling and TXN Disconnect Level
Timo

Similar Messages

  • BAPI_SHIPMENT_COST_ESTIMATE  What are the min. required parameters to pass

    Hi All,
       I would like to know what are the minimum required  parameters to pass in BAPI BAPI_SHIPMENT_COST_ESTIMATE. And from which tables I can pull out that information to pass to this BAPI.
    Does this BAPI creates a shipment cost document in the system or just shows the estimate of the shipment cost.
    If it creates a shipment cost document then its good for me. but if it shows us just the estimate does it shows estimate for each delivery (total Qty, Unit Price & Total Price). 
    What will be the item category it will pick. I like to see it picks  basic price related item category.
    Does any body has used this bapi ?
    Appreciate your fast reply.
    Regards,
    Leona

    Hello, I´ll try to answer your question:
    1. is it possible to run the bapi without actual shipment number and the shipment ( & cost ) will be created in simulation mode ?
    I think that the bapi only run with external shipment number and only run in simulation mode, that´s mean the bapi can not create any shipment and cost document, if you want to create a shipment use BAPI_SHIPMENT_CREATE, to create a cost document I don´t know if there is a bapi but you can create easily with transaction VI01 (batch-input)
    The shipment number that you use to call the bapi is a ficticious number always between external range indicated in field V_TVTK-NUMKE with the shipment type that you use.
    2. is it possible to perform estimation to inbound shipments ?
    Yes it´s depend on the shipment type. In standard system 0010 is used
    In the example that I have I use an inbound delivery
    3. does the bapi creates shipment and scd in simulate mode like transaction VICI ( from sales order ) ?
    I think that the bapi only run in simulation mode and it can not create any document
    4. is there any problem if i customized my scd item categories to open manualy ?
    I think that the bapi needs to work properly automatic iten categories
    can you please post sample code ( or any other doc's ) for this bapi ?
    I send you a document with an example if you give me an e-mail because I don´t know how to attach a word document
    Best regards,

  • What are the content conversion parameters

    Hi All
    This link contains the text file.
    http://www.census.gov/foreign-trade/schedules/d/dist.txt
    what are the content conversion parameters are required to convert that text to xml.

    <sen_dt>
         <prefix>
              <heads>
                   <dc>               
                   <pc>
                   <name>
              <main>
                   <dcno>
                   <pcno>
                   <name1>
    <rec_dt>
         <prefix>
              <District_code>             District code      optional
              <port_code>              port code          1
              <name>                   name              
         <main>
              <District_code_no>
              <port_code_no>
              <name1>
    content conversion
         document name:<sen_dt>
         document namespace:http::----
         document offset:--
         recordset name:input
         recordset structure:heads,1,main,*
         recordset sequence:Ascending
         recordset per message:----
         keyfield name:---
    prefix.fieldfixedlengths:---
    prefix.endSeparator:---
    prefix.fieldNames;---
    prefix.keyFieldvalue:--
    prefix.keyFieldlnStructure:---
    main.fieldFixedLengths:9,
    main.fieldSeparator:|
    main.endSeparator:'nl'
    main.fieldNames:district code,port code,name
    main.keyFieldValue:
    main.keyFieldlnStructure:

  • What are the content conversion parameters for this structure

    Hi All,
    The below file is the text file. what are the content conversion parameters are required and what is the structure to create in the IR to convert into xml.
    Schedule D - District/Port List (by District Code) [Produced13APR11]
    District |    Port      |    Name
    Code     |    Code      |
    01       |              |    PORTLAND, ME
             |    0101      |    PORTLAND, ME
             |    0102      |    BANGOR, ME
             |    0103      |    EASTPORT, ME
             |    0104      |    JACKMAN, ME
             |    0105      |    VANCEBORO, ME
             |    0106      |    HOULTON, ME
             |    0107      |    FORT FAIRFIELD, ME
             |    0108      |    VAN BUREN, ME
             |    0109      |    MADAWASKA, ME
             |    0110      |    FORT KENT, ME
             |    0111      |    BATH, ME
             |    0112      |    BAR HARBOR, ME
             |    0115      |    CALAIS, ME
             |    0118      |    LIMESTONE, ME
             |    0121      |    ROCKLAND, ME
             |    0122      |    JONESPORT, ME
             |    0127      |    BRIDGEWATER, ME
             |    0131      |    PORTSMOUTH, NH
             |    0132      |    BELFAST, ME
             |    0152      |    SEARSPORT, ME
             |    0181      |    LEBANON AIRPORT
             |    0182      |    MANCHESTER USER FEE AIRPORT, NH
    02       |              |    ST. ALBANS, VT
             |    0201      |    ST. ALBANS, VT
             |    0203      |    RICHFORD, VT
             |    0206      |    BEECHER FALLS, VT
             |    0207      |    BURLINGTON, VT
             |    0209      |    DERBY LINE, VT
             |    0211      |    NORTON, VT
             |    0212      |    HIGHGATE SPRINGS/ALBURG

    since in this case you dont seem to have a key value to figure out what your header is, it is better to go for a two level mapping. i.e first read all the data - each line as an xml tag. and in the first mapping group it as required and then use it for your original mapping.
    Regards,
    Ninu

  • What are the steps which we need to tack care to point  XI 3.0 to BW PI 7

    Hi Experts,
    Need help please, right now we are sending data through XI 3.0 to BW 3.5 system, the scenario's is working fine. Now client wants to upgrade BW3.5 system to PI 7, XI system is same 3.0.
    Now what are the steps which we need to tack care to point  XI 3.0 to PI 7 to work existing scerarious.
    Thanks,
    Venkat.

    Hi Venkata,
    When you say PI 7, do you mean BI 7?
    Carlos

  • What are the steps (High level) needed to implement US Payroll?

    Hi,
    What are the (high level) steps needed to implement US Payroll?
    Please provide any relavent URLs for any steps if possible.
    Thanks,
    Prabakar

    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Define employee attributes
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create payroll area
    Transaction Code:-PE03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Check Default Payroll Area
    Transaction Code:-PA03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
    Transaction Code:-PA03
    Personnel Management Personnel AdministrationOrganizational Data Organizational Assignment Create control record
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine EE Sub Group Grourping for PCR and Collective Agreement Provision
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine Reason for Change
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck PayScale Area
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayCheck Assignment of PayScale Structure to Enterprise Structure
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDetermine Default for PayScale Data
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PaySetup Payroll Period for Collective Agreement Provision
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayDefine PayScale Salary ranges
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Create Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type Group u201CBasic Payu201D
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Text
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Entry Permissibility Per Infotype
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Check Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Employee Sub Group Grouping for Primary Wage
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Personnel Sub Area Grouping for Primary Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataBasic PayWage Types Define Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionDefine Reason for Change
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCreate Wage Type Catalog
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type Group u201C Recurring Payments and Deductionu201D
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type text
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Entry Permissibility Per Infotype
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Personnel Area Grouping for Primary Wage Type
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataRecurring Payment and DeductionWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Define Reasons for Changes
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationaPPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
    Transaction Code:-OH11
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments Wage TypesCreate Wage Type Catalog
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type Group Additional Payments
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional Payments and DeductionWage TypesCheck Wage Type CatalogCheck Wage Type
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Entry Permissibility for Additional Payments
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
    Transaction Code:-OH13
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesCheck Wage Type CatalogCheck Wage Type Characteristics.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Employee Sub Group Grouping for Primary Wage Type.
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
    Transaction Code:-OH00
    Personnel Management Personnel AdministrationPayroll DataAdditional PaymentsWage TypesDefine Wage Type Permissibility for each PS and ESG
    This is not the complete once just for reference purpose i have given it to u
    Edited by: Sikindar on Nov 19, 2008 9:19 AM

  • What are the hierarchy relevant parameters?

    What are the hierarchy relevant parameters?

    <sen_dt>
         <prefix>
              <heads>
                   <dc>               
                   <pc>
                   <name>
              <main>
                   <dcno>
                   <pcno>
                   <name1>
    <rec_dt>
         <prefix>
              <District_code>             District code      optional
              <port_code>              port code          1
              <name>                   name              
         <main>
              <District_code_no>
              <port_code_no>
              <name1>
    content conversion
         document name:<sen_dt>
         document namespace:http::----
         document offset:--
         recordset name:input
         recordset structure:heads,1,main,*
         recordset sequence:Ascending
         recordset per message:----
         keyfield name:---
    prefix.fieldfixedlengths:---
    prefix.endSeparator:---
    prefix.fieldNames;---
    prefix.keyFieldvalue:--
    prefix.keyFieldlnStructure:---
    main.fieldFixedLengths:9,
    main.fieldSeparator:|
    main.endSeparator:'nl'
    main.fieldNames:district code,port code,name
    main.keyFieldValue:
    main.keyFieldlnStructure:

  • What are the coding standards we need to follow?

    While developing SAPUI5 applications what are the coding standards we need to follow.

    Hi,
    Refer SAPUI5 SDK - Demo Kit
    Regards,
    Chandra

  • What are the parts i will need for my ipod since my ipod screen remains completly blank white

    what are the parts i will need for my ipod since my ipod screen remains completly blank white

    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • What are the logical database source (SQVI) should i use for quick viewer

    Dear expert,
    Would like to seek for your help, how to use (SQVI) quick viewer/SAP query to generate the listing of   and can I use SQVI -quick viewer and select the data source as logical database source to generate in order to generate the listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
    Between, what are the data source should I use for logical database to generate the query with listing of GL account number,GL account descrition , tax category,posting without tax allowed column in the query by company?
    Please help.
    Many Thanks.
    Regards,
    Karen

    Hi,
    Thank you for the prompt reply, what I would like the query to generate is the master data GL listing for GL account,GL description,Tax category, posting without tax allowed column where i use BRF as the data source for logical database to generate the quick viewver but the BRF data source do not have the GL description.
    How I can join table/join query or what are the data source should i use so that i can able to generate the query with GL master data listing by company code by display GL account,GL description,Tax category, posting without tax allowed?
    Between,do you have any reference/link/document on the how to use the SQV1?
    Also, what the difference between SQV1 and SQ01 ?
    And also what are the sap query,inforset query,quick viewer mean for and what are the difference between them also when should i use sap query,inforset query,quick viewer  to generate the query?
    Please help.
    Many thanks.
    KH

  • Recommended tuning parameters 10gAS 9.0.4 for 500 users

    Hi,
    we have Oracle 10gAS 9.0.4 deployed on multiprocessor windows using J2EE + WebCache type of installation
    couple hundred EJBs, signed applet as the client gui
    datasource connection pool using oracle thin driver
    what would be the recommended tuning parameters for 500 concurrent users hitting this web/appserver?
    Thanks,
    Arpad

    Dear Malmstrom ,
    Hope U R fine,
    I am New to Oracle AS. We r deploying an application created in Oracle forms and reports 10g using Oracle database 10gR2 and FRServices 10g.
    We r facing a no. of problems
    1). A very frequently accessed form generates FRM-92102 while accessing using web.
    while other forms seems to be ok.
    2). We r facing Some times Reports generated using Oracle forms does not display page or hangs.
    What we accessed is that We have just Installed Oracle FRServices and did not configured it.
    Both oracle Database and FRServices are on one machine using windows 2000 Adv. Server which is an IBM dual processor machine with 2G RAM and 2G Virtual Space.
    We r also going to shift Oracle database on RHEL 4.0 with Database 10gR2 using the same machine while we have planned to install FRServices on a seperate machine that is P4 2.8 with 1G RAM + 2G Virtual Memory.
    Our requirement is that Maximum of 200 users with 40 concurrent sessions.
    PLS suggest us the recommended settings for Oracle FRServices.
    Thanks and waiting for ur reply.
    Aamer Javaid.
    [email protected]

  • What are the installer(setups) I need to install for webcenter Portal

    I use a 32bit laptop now and I want to start working on webcenter portal. What are the applications I need to install in order so I can successfully get my webcenter working. I already have installed Jdeveloper 11.1.1.6.0
    Thanks

    This depends on what exactly you mean by 'my webcenter'.
    If all you want is develop your own webcenter applications (using the WebCenter Framework), you might be good to go only with the webcenter jdev plug-in (see http://www.oracle.com/ocom/groups/public/@otn/documents/webcontent/156082.xml#oracle.webcenter.app). Your apps will be deployed to the integrated WLS. There will be two important missing pieces:
    a) WebCenter Content as the document storage (requires also a database)
    b) BPEL/BPM as the workflow engine
    You might also want to install WebCenter Portal: Spaces, or deploy your apps to a separate WebCenter Portal server (running on its own Weblogic Server).
    Optionally, you might also want to utilize other servers contained in the WebCenter Portal license such as Secure Enterprise Search for enterprise searching and/or Oracle Access Manager for enabling single sign-on between the above mentioned components.

  • What are the system settings, etc., needed for a project in DV widescreen?

    Hello - to do a project in DV widescreen -- what are the proper system settings and what steps must I take to import and log footage? I've tried the anamorphic -- but viewer doesn't connect to camera -- sorry this is so rudimentary but if anyone can help me get it going, I'd be very grateful. Thank you!

    If your footage is DV NTSC, it is anamorphic if it's widescreen. You should be able to simply use the "Easy Setup" for DV NTSC Anamorphic and edit your heart out.
    If you can't see the camera, might trash preferences: http://fcprescue.andersholck.com/
    And if that doesn't work, QT 7 should be reinstalled: http://docs.info.apple.com/article.html?artnum=301852
    Jerry

  • I overcharged my ipad 2 battery for about 3 hours. what are the consequences, i overcharged my ipad 2 battery for about 3 hours. what are the consequences

    i overcharged my ipad 2 battery for about 3 hours. what are the consequences? and there are these tiny fibers and dust that enters insideipad screen. how will i clean them. .please help

    Relax, you cannot "over" charge it.  The built in charging protection ensures it will not overcharge the battery or do any damage leaving it plugged in.  Many folks (myself included) leave our iPads and iPhones plugged in overnight, all night, so they are charged and read for use the next day.

  • What are the Batch mode parameters for Receiver JDBC Adapter

    Hi All,
             Could some pls tell me how to set bacth mode in receiver JDBC adapter and what are its parameters and how to configure them. i beleive there is something like max count parameters etc..
    Regards,
    Xier

    Hi,
    Check this for more info
    http://help.sap.com/saphelp_nw04s/helpdata/en/64/ce4e886334ec4ea7c2712e11cc567c/frameset.htm
    Regards
    Seshagiri

Maybe you are looking for

  • HP Deskjet Printer has stopped connecting wirelessly?

    My HP Dekjest 3050 printer has been working perfectly well for approximately one year.  it has suddenly decided it cannot locate my home wireless network?!  The blue 'wireless' light is flashing slowly and on the HP support website the solution is to

  • Video "Dropouts" with FCS and Mountain Lion

    I would like to see if anyone else is having this problem and maybe save some folks from the experience. I have two macs. #1- Imac, 2.93, core 2 duo, 4g ram, 24". #2-Macbook Pro, 17", 2.53, 4g 4t g-raids Clean Install done on Imac of Mountain Lion. 

  • Oracle apache dont sends forms

    Hello i got a question i have a installed Oracle9i with integrated APACHE Webserver and PHP 4. The Webserver does interpret my php code very well but i cant send my forms. I have tried it also just with HTML with the same result if i click on the sen

  • Re-initiate Vectors in Loop

    import java.util.Vector; public class testClass {    private Vector basket = new Vector();    private Vector vowels = new Vector();    testClass(){        basket.add("apple");        basket.add("orange");        basket.add("starfruit");        basket

  • Mod_wl_20.so for Redhat EL5

    I'm looking for the Weblogic Plugin for WLS 9.2 MP2 that will work with RHEL5. The ones that come with the software are linked against libstdc++.so.5 and that doesn't ship with RHEL, only libstdc++.so.6 . Hopefully I don't have to download 10 and ins