What are the changes to be done on BW end during hardware change of source system?

Hello Gurus,
There is some hardware changes happening and I need help in certain things which I need to do from BW point of view. First of all, I have attached a figure showing my system landscape. I would kindly request you to go though the fig first.
For QA, initially we were using AG3 as the source system, now they have made the hardware changes, made a system copy of AG3 into the new system AEQ. We have connected our BW QA system to this new system AEQ. Now when I check the system, there are no data in set up tables (I am using SD and MM), but there are data in tables. But when I replicate data sources from AEQ to BW QA, the existing transformations and DTPs will disappear. So, that left me with 2 options-
1. Either transport old transformation and DTP from BW DEV to BW QA
2. Or create new transformation and DTP in BW QA system.
Can you experts please suggest me what should be the solution?
Also, please note that, the basis team started the hardware changes with ECC QA system for some reason. Once ECC QA is fine, they are planning to make the changes in ECC DEV system (from AG2 to AED). Currently, AG2 is connected to BW DEV and AEQ is connected to BW QA.
Can you please suggest me whether there will be any issue if we opt to transport transformation and DTP from BW DEV to BW QA when BW DEV is still connected to old source system? Or, is there any other easy way to sort this out? Please suggest?
Thanks a lot
Rakesh

Hi,
1. Either transport old transformation and DTP from BW DEV to BW QA?
Yes, better to transport from bw dev to bw qa
2. Or create new transformation and DTP in BW QA system?
at BW Quality, creation may not be possible. Better to transport from bw dev to bwq.
or use standard abap program to activate transformations and dtp.
When changes are applying at source then you just need to take care the delta queues
clear all queues by running related V3 jobs and delta info packs. make them as 0 count.
once basis team was done changes later try to check your delta loads at bwq .
Thanks

Similar Messages

What are the connections to be done for file-to-RFC scenario in XI & R3 ?

Hi,
What are the connections to be done for file-to-RFC scenario in XI & R3 & also if it is RFC-to-File .
I need to know what type connections used for file-to-RFC in backend .
In SLD it should be Third Party or WEB AS ABAP..

Hi Nandan,
Perform the following configurations...
SAP XI
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (IDX1)
a) Select create new button
b) Enter the port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
SAP R/3
1) RFC Destination (SM59)
a) Choose create.
b) Specify the name of the RFC destination
c) Select connection type as 3 and save
d) In the technical settings tab enter the details SAP SID/URL and system number#.
e) Enter the Gateway host as same details above SID/URL.
f) Gateway service is 3300+system number#.
g) In the Logon /Security tab, enter the client user & Password details of Destination system.
h) Test the connection and remote logon.
2) Create Port (We21)
a) First Select Transactional RFC and then click create button
b) Enter the destination port name as SAP+SID (The starting char should be SAP)
c) Enter the destination client.
d) Enter the RFC Destination created in SAP R/3 towards other system.
e) Save
Regards
San
Remember to set the thread to solved when you have received a solution there is a Way.

What are the documentations you have done.

Hi,
What are the documentation you have done in SD module, This is the Question which I had faced in the Interview, Did any one explain me meaning of documentation with Examples.
Regards,
Arjun.

Hallo sir,
could you please expalain me the SD relavant documentations with some examples.
Arjun.

What are the ways to Run an LAb veiw application remotely in windows Xp /2000 System.

I need to run LV Appliccation remotely what is the best possible way to do.
Suresh Thangappan

Hello Suresh T,
Remote front panels may be the easiest way for you to run your VIs remotely. They work by allowing you to embed your VIs into a web page. Please see the links below for more information.
Remote Panels in LabVIEW -- Distributed Application Development
Developing Remote Front Panel LabVIEW Applications
Regards,
Matt F
Keep up to date on the latest PXI news at twitter.com/pxi

What are the interfaces done in Shipping

hello SD gurus,
i am new to SAP n i am attending interview in my first interview itself i was posed a question . what are the interfaces u have done in Shipping?
so i request any one to help me in this regard wich not helps here but to prepare my self to make ready with all other topics also plz help me in answering this question even not exactly but also related
bye
venu

Dear Venu,
dont worry about it. Well interfaces are nothing but the sap system talks with a non sap system which the client has been using. Like we have an interface to manage the shipping functionality in our system called nistevo. The data from the delivery flows to that particular interface through BAPI's or some program so that the other system understands the information sent and it starts working. Also the confirmations from that other system are updated in SAP using these Zee programs. In a nutshell, interfaces are non sap systems which talk with sap.
Hope it helps. Please reward if useful.
Thanks & Regards
Sadhu Kishore

What are the steps to be carried out for installing 0cca_cc1 - business

Hi All,
what are the steps to be done for 0cca_cc1 for installation of business content and then how is the data extracted from r/3?
- how to install nor use the standard queries and there are 2 update rules how to activate them too? for 0cca_cc1.
Pls let me know the url for standard datasource for 0cca_cc1
Thanks
Pooja

Goto source system (e.g. R/3). Execute RSA5 transaction.CLick on SAP and press + symbol on the top. then press find to get your datasource. press activate datasource. This will activate your datasource. In RSA6 you will get the activated datasource.
Then in BI side you replicate your datasources and the installed datasource will be visible. Then create the data flow if not installed.
Delta is relatively a big topic. Refer following:
/people/swapna.gollakota/blog/2007/12/27/how-does-a-datasource-communicates-delta-with-bw
/people/sap.user72/blog/2004/12/23/logistic-cockpit-delta-mechanism--episode-two-v3-update-when-some-problems-can-occur
What you need to do from your end is create init infopackage, load the data. Once done create delta infopackage and load the data. If you are in 7.x then need to create DTP accordingly.
But just remember the datasource should be delta capable. In infopackage when you get only full option then you can say the datasource is not delta capable.
Edited by: Shailesh Naik on May 11, 2009 11:08 AM

What are the steps would liket take using AR,AP,GL Datasource in R/3

Hi,
When i would like to use SAP content data source Like ,AR,AP,GL
data source what are all the master data need to activate for this.
Ex: for AR we need to activate the Customer master data
what abt AP,GL what are the master data need to be activated while using SAP content data source in R/3.

What are the steps i need to do in source system?.First of all identify the data source and what are the master data need to be used for the data source like AP,AR,GL in R/3.
Find out what Cubes, ODS's will be used - > HELP.SAP using the datasource.
Activate transaction datasources.
See Infosource Overview and activate relevant master datasources in RSA5 - ECC.
Install content on BI side.
It doesnot matter what datasources you activate first, it is just a preferred way to load transaction data only after master data.
What are all the masterdata need to activate before going to activate AR,AP,GL data source in R/3.
Infosource Overview

What are the Master data that should be uploaded for Go live

Can any one tell me what are the SD master data that should be uploaded during GO live

Hi Prem,
SD Master data includes:
- Customer Master data
- Material Master data
- Customer-Material Info records
- Enterprise Structure info (Dist Channels,Divisions etc)
- Condition Master Data in Pricing.
I believe, all these need to be uploaded during GO Live.
regards,
Raj

What are the Premier, Extended and Sustaining Support Dates for Beehive?

If you look at the Oracle Lifetime Support Policy for Oracle Fusion Middleware (found at http://www.oracle.com/us/support/lifetime-support/lifetime-support-software-342730.html), Beehive is not listed. What are the dates that Premier and Extended support end for the various versions of Beehive?

Oracle Beehive has been added to the online Oracle Lifetime Support policy document
http://www.oracle.com/us/support/library/lifetime-support-technology-069183.pdf

What are the steps in Apple Configurator iPad restore? It appears to me that Configurator repeats steps, but it probably is that I don't know what happens and when.

what are the steps in Apple Configurator iPad restore? It appears to me that Configurator repeats steps, but it probably is that I don't know what happens and when.

If you have a rescue email address (which is not the same thing as an alternate email address) set up on your account then you can get a clue to what it is, and potentially use it, by going to https://appleid.apple.com/ and clicking 'Manage your Apple ID' on the right-hand side of that page and log into your account. Then click on 'Password and Security' on the left-hand side of that page and on the right-hand side you should see an option to send security question reset info to your rescue email address.
If you don't have, or don't want to use, your rescue email address (you won't be able to add/change it until you can answer 2 of your questions) then you will need to contact iTunes Support or Apple to get them reset (which will be by phone as they need to verify your id - we are fellow users here on these forums).
e.g. you can try contacting iTunes Support : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Account Management , and then 'Forgotten Apple ID security questions'
or try ringing Apple in your country and ask to talk to the Accounts Security Team : http://support.apple.com/kb/HE57
When they've been reset you can then use the steps half-way down this page to add/change rescue email address for potential future use : http://support.apple.com/kb/HT5312 . Or you could change to 2-step verification : http://support.apple.com/kb/HT5570

I want to create a new customized screen layout for responsive HTML5 output. I don't want to use the ones present in the gallery. What are the steps to do so?

I don't wish to use the ones already present in the gallery. They do not meet my requirements. Therefore, I want to create/design my own screen layout for the responsive HTML5 output. Please let me know the steps to do so. How to create a SLZ file, what is the code that I need to write. What are the components that I need to create to have a complete screen layout to be used in a responsive HTML5 output.

That would require inline formatting and I doubt that is an option.
If I am following you, the header area is full width of the screen so I cannot see how it can be broader, Perhaps you mean deeper? A screenshot might help here. The change would be made in the layout.css file.
That would be a change in the layout.css.
I suspect that too is controlled by the layout.css.
To make the changes you would have to go into the layout.css and modify that. As you will see, it is a very complex CSS and that is why I said creating you own layout is not easy. Hopefully when Willam is available again, he may be able to give you some more specific information.
I think Willam will confirm that if you cannot read the existing CSS to make those changes, then creating your own skin would be beyond your capabilities. Please do not take any offence there, I am simply emphasising how complex a task it is to create a skin from scratch. It's not one I would take on.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

What are the consequences of changing the scratch disc??

What are the consequences of changing the scratch disk? Everything was fine with my project until I tried to work on a new project for someone else. I uploaded new footage to a new session and changed the scratch disk to my other external hard drive. Now there is confusion with my initial project..

This is something we all live with. You have to be careful going back and forth between projects, if you are using different scratch disks for each. If you are editing a project on one scratch disk, then start a new project on another, remember to switch back to the original scratch disk when you go back to the original project. Otherwise render files will wind up on the wrong drive, or worse, you will capture to the wrong drive. Each issue is correctable by managing your media over to the proper drive, and deleting then deleting from the other.

SOA Suite 10g and SOA Suite 11g? what are the major changes in these two?

Hi Experts,
I am keen in knowing about Soa Suite 11g. SOA Suite 10g and SOA Suite 11g, BPEL changes? what are the major changes in these two product/tool wise? Is now OSB is part of Soa Suite 11g? it would be helpful for us to know what are the major changes and updates or modifications came in 11g.
Please share this valuable information.
Is there still any version is in progress from Oracle, which is yet to be officially launched from oracle?

what are the major changes in these two product/tool wise? Few major changes to enlist are that SOA suite 10g was using Oracle Application Server (OC4J) however 11g is on Weblogic and 11g is based on SCA. B2B is now part of SOA suite itself and OSB can share a domain with SOA. You may refer below link to know few more -
http://blogs.oracle.com/soabpm/2010/03/11gr1_patchset_2_111130_soa_fe.html
Is now OSB is part of Soa Suite 11g? OSB has a separate installer but can share a domain with SOA and SOA-direct binding is also supported now. Refer below link to know more about new features in OSB 11g -
http://download.oracle.com/docs/cd/E14571_01/relnotes.1111/e10132/osb.htm#CJACHEHJ
Is there still any version is in progress from Oracle, which is yet to be officially launched from oracle?No major release is planned. Patches for 11g R1 may come.
Regards,
Anuj

What are the key steps & order to follow: changes in my flat file structure

HI,
I have a Cube which sits on ODS.
In the ODS, the are 6 characterisics: Char1, Char2,...., char6; and 3 key figures: kf1, kf2, and kf3.
The ODS is loaded through a flat file.
Through an update rule and startup routine, the ODS updates the cube.
Now, I have a new requirement to add 2 new characteristics (Cha10, char20) and one 2 key figures (KF55, KF66)).i.e. the flat file will now be coming in with these new fields.
I have an idea but this this is the first time I really have to implement, I need to be sure.
What are the key steps that I need to go through and in what order?
Thanks

What version are you running ?
Will you need to load history data as for these new fields or is it just going forward ?
Is it all one to one mapping for the new fields ?
1. Make sure you know to what dimensions you need to add the new chars ? New dimension for these two ?
2. New chars to be made keyfields ?
3. Update Type for keyfigures Overwrite or Additive ?
Enhance the Cube, DSO, change TRFN/TR/UR..

What are the steps to change the name on the "House" in the side bar on OSX Mavericks?

What are the steps required to change the name on the "House" in the side bar for OSX Mavericks?

You want to change your username. First, make a backup of your files with Time Machine, as any error may damage your user.
Then, follow these steps to change your username > http://support.apple.com/kb/ht1428 Be very careful, as it requires to log in as root

What are the changes to be done on BW end during hardware change of source system?

Similar Messages

Maybe you are looking for