What are the little red squares on the lower left hand corner of a movieclip in the actions panel?

What do the little red squares on the lower left hand corner of the movieclips in the actions panel mean? [Fig. 1]
I'm working off this template in Flash CS3, that's using ActionScript 2.0 actually.
I don't know whether or not that means anything in regards to the above inquire?
Again, any help is appreciated.
Fig.1

OK, I think I might have figured this out.
First. You guys keep insisting it's the Movie Explorer. It is not. It is the Actions Panel. You can see for yourself. Option+F9 opens the Actions Panel. Option+F3 opens the 'Explorer Window'. They are similar in appearance but they're not the same thing. They're just not.
Second. I believe that the red dots on the movieclips, and also buttons, indicates when there is actionscript directly on the movieclip and/or button, as oppose to actionscript written on a frame within a movie clip and/or button.
You really have to pay special attention to the top of the Actions Panel right next to where it says 'Actions' there's a dash '–' and then it says either 'Frame', 'Movie Clip', or 'Button'. This indicates exactly where you're about to write script to, or where you're reading the script from, so it's important to pay attention to this.
That left side pane, in the Actions Panel, is divided by 'Scene' and by 'Symbol Definition(s)' and it's confusing because it's possible to have a symbol appear more than once depening on where the actionscript is located (i.e. on a frame or on the movie clip or button itself).
For example if you have script on a FRAME within movie clip A, it'll appear in the SYMBOL DEFINITION(S) pane, without a red box, but if you were to write script on movie clip A itself, it would still not have the red box on it in the SYMBOL DEFINITION(S) pane, BUT it would appear again as movie clip A in the SCENE pane, and this time it would appear with the red box next to it, casue it now has actionscript directly on the movie clip itself. Wow, how confusing is that ha.
Keep in mind that if you made a movie clip B, within movie clip A, and if you placed actionscripts directly on movie clip B, NOT on a frame, then movie clip B would get a red box and appear UNDER movie clip A, within the SYMBOL DEFINITION(S) pane, NOT the SCENE pane. Ha.
If you wrote script on a FRAME within movie clip B it would appear in the SYMBOL DEFINITION(S) again, yes a second time, twice, but WITHOUT a red box. Confused yet? ha.
I don't know why Flash decided to do it this way. But it starts to make sense when you're actually viewing it, when it's in front of you. I think this is just for actionscript 2.0 (and for actionscript 1.0 presumably), but I don't think this is the case for ActionScript 3.0, because in as3 it's all instance name based, and targeting based, so there's no such thing as writing script directly onto a symbol of any kind, button, movie clip or otherwise.
But yeah, that's it in a nutshell.
Thanks for trying to help anyway.

Similar Messages

What are the actions required immediately?

DB: 10.2
Hello All,
I had some issues.
I used rman utility to run the backup after that I run CROSSCHECK command. rman> CROSSCHECK copy;
rman> CROSSCHECK backup; &
rman> DELETE EXPIRED backup;
I am getting following output.
logged as a sys (sysdba)
SQL> select * FROM V$RECOVERY_FILE_DEST;
NAME SPACE_LIMIT SPACE_USED SPACE_RECLAIMABLE
/flash_recovery_area 7147483648 7143581696 0
NUMBER_OF_FILES
167
SQL> show parameter db_recovery_file_dest;
NAME TYPE VALUE
db_recovery_file_dest string /flash_recovery_area
db_recovery_file_dest_size big integer 7147483648
SQL> archive log list;
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 223
Next log sequence to archive 223
Current log sequence 225
what are the actions required immediately?
DN

HI
you will have to create manager as portal role and assigned to them necessary worksets containing necessary worksets look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions and applications you need to do it .please do not forget to give points
with regards
subrato kundu

All my video clips within my movie have a yellow warning symbol in the lower left-hand corner. Can't seem to understand why. Help?

All my video clips in an almost-complete movie now have a yellow warning symbol in the lower-left hand corner. How can I resolve this?

It's hard to say - as You can select to use another one in another location - which I know nothing about.
• to find out where iMovie tries to find material - As I remember it one put the pointer arrow ontop of one yellow exclemation mark and "Hands off" for some secondes - and it will tell.
I use to do a quick - [Shift+cmd+3] to do a screen dump - so that I can read this address in full and try to set all material back to this location. iMovie can not be set to find it elsewhere - only alt is to re-insert material and now not move it - but this is most often a more tedious way - than just move material back to where iMovie tries to find it.
• To set iPhoto to another Library
- Start iPhoto - BUT KEEP - alt-key down during full up-start (also called the option key)
- Now You can select another one
Yours Bengt W

How do I add the option to see the artwork (in the lower left hand corner of the sidebar) of the song currently playing in my library, like I could in previous versions of itunes?

How do I add the option to see the artwork (in the lower left hand corner of the sidebar) of the song currently playing in my library, like I could in previous versions of itunes?

Along with iTunes DJ & Cover Flow, that option has gone...
tt2

I would like to not have the little box in the lower left hand corner telling me where the browser is going. Can I remove it?

Lower left hand has address bar running until page is loaded. Can I remove it?

There are other things that need your attention.
Your plugins list shows that you have the Mozilla ActiveX plugin installed.
*Mozilla ActiveX control and plugin module
The Mozilla ActiveX plugin is not compatible with Firefox 2 and 3 and you should remove it.<br />
For instructions on how to remove the Mozilla ActiveX plugin see: http://kb.mozillazine.org/ActiveX
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
# Adobe PDF Plug-In For Firefox and Netscape "9.4.4"
# Shockwave Flash 10.2 r152
# Next Generation Java Plug-in 1.6.0_23 for Mozilla browsers
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://kb.mozillazine.org/Flash
*http://www.adobe.com/software/flash/about/
Update the [[Java]] plugin to the latest version.
*http://kb.mozillazine.org/Java
*http://www.oracle.com/technetwork/java/javase/downloads/index.html (Java Platform: Download JRE)
Update the [[Adobe Reader]] plugin to the latest version.
*http://get.adobe.com/reader/otherversions/

How do I get rid of this stupid box in the lower left hand corner?

There is this awful box you put into firefox 4 and I want to get rid of it
http://img827.imageshack.us/img827/310/thisstupidbox.png

The easiest way is to use the Status-4-Evar add-on. With it you can choose to not display any of the status messages or url hover previews, or display them in the add-ons bar or location bar instead.
https://addons.mozilla.org/firefox/addon/status-4-evar/

Quick report what are the notiifications are send out from SRM via SOST

Hi all
Can i have a list of messages sent out of SRM (from SRM via SOST.)
sc completed by the buyer -
but i want a set of all reports. so that i can decide i can filter go / no-go from srm system .
any help is appreciated,
what are the events are triggered notification.
for eg. COMPLETED ...when buyer completed , requestor gets notification.
so what are the other events. i have forgotten
user creation too right? like that many..
WHAT ARE THE ACTIONS IF I DO IN THE WEB , SOST entries will get created?. I KNEW BACKEND METHOD to download all sost message. but really we should know without seeing sost.
Muthu

You can check the fields of these tables via SE11
Purchase Document Date - EKKO-BEDAT
Item Description - EKPO-TXZ01
Net price per item - EKPO-NETPR.
Regards,
Rich Heilman

System beep every time I mouse to the lower left hand screen corner

Can anyone help me with this?
Every time I mouse to the lower left hand corner of the screen, I get a system beep.
I am using a Mac Book Pro with a 24 inch Cinema Display attached.
I do not use Expose or Spaces, I have no hot corners set.
I have no hot corners set for the screen saver.
Any suggestions?

Sounds like the beep I get when I go to the upper right corner, for which I've set the "All windows" in expose. Try this: go to System Prefs >expose&spaces, and set your lower left corner for all windows. Then close system prefs, and throw your mouse into the lower left corner to activate expose. Then go back to system prefs and set that corner for nothing (just the dash). Now try it and see if that beep still happens.

What are the difference between 4.6c and 4.7 versions?

what are the difference between 4.6c and 4.7 versions?
if any please give me answer
regards
ramanji

Hi,
Upgrade SAP or Installation of SAP R/3 and ECC
What is ECC? Where to find the installation steps of ECC 5/6.0 with SQL as database and on windows platform with the steps including Solution Manager installation?
http://service.sap.com/instguides
ECC means Enterprise Central Component.
There are all the relevant installation guides. You NEED SAPNet access because without a registered and licensed SolMan installation number you will not be able to generate the SolMan key for the ECC installation.
Upgrade to 4.7
Have you gone through an upgrade to 4.7?
What are the difference or changes associated with 4.7.
If you are currently on 4.6C and are inching forward to upgrading to 4.7 then this information might be useful to you.
There is very little difference between 4.6 and 4.7, the only "steps" you should need are steps in SU25 ( skip step 1) Then go through all your role and perform a merge old new to bring in the new authorization objects
Just to forewarn you of a potential problem which have been encounter at the point of writing.
After updating/ modifying roles in step 2C, when going back into 2C to make sure all roles are now green, 70% have gone back to red!
The maintenance done is ok, but there seems to be a problem while trying to go back into the roles again to re-generate.
SAP recognizes them as needing "adjustment", so you cannot pick them up in mass generate in PFCG as they do not come in, even though the authorizations tab is red.
This problem is currently with SAP and it is confirmed that nothing have been done wrongly.
Generally, the work is quite manageable in the upgrade, but don't be surprised at how big the upgrade is when compared to upgrading from 46b to 46c.
If we have full software of 46c and 47E is it possible to upgrade 46c to 47E or there is a seperate 47E upgrade software need to be requested from SAP?
Where I can get the document with upgrade steps on the service market place?
It is of course possible and supported:
http://service.sap.com/inguides
--> SAP Components
--> SAP R/3 Enterprise
--> (choose your version)
at the bottom there is an "Upgrade guide" for Windows and Unix.
For Upgrades it is recommended to read ALL the notes mentioned in the
upgrade guide and to make sure one is using
- the correct version of the "tp" program
- the correct version of the "R3trans" program
- the correct version of the "R3up" program
All that is explained in the upgrade guide and in the corresponding notes.
If this is your first upgrade you should take a person, that has some experience on doing that for the first time.
Installation of SAP R/3
Currently we are going to install SAP on a new IBM server from the existing COMPAQ server. Where can I get the steps for that.
Configuration is :
   OS - windows 2003 server
   DB - Oracle 9i
   SAP 4.7
http://service.sap.com/instguides
--> SAP Components
--> SAP R/3 Enterprise
--> SAP R/3 Enterprise Core 4.70 / Ext. Set 2.00 (SR1)
--> Inst. Guide - R/3 Enterprise 4.7 x 2.00 SR1 on Win: Oracle
The above url is the SAP Service Marketplace with all the information you need to install, configure and run system. You need to be a valid licensed customer with a user ID and PASSWORD to use that.
Without access you won't be able to successfully run any SAP systems because it has notes, patches etc.

What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: NTSC - CCIR 601
Frame Size: 720 x 480
Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
Display Format: 4:3 Letterbox
MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
Tape: DigiBeta
Original Aspect Ratio: 1.55 (14:9)
Vid Rate: 29.97 fps
Pixel Aspect: Square
Frame Size: 720 x 540
Anamorphic: YES
Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
Please feel free to ask for clarification or further information you need to answer my question.
Thank you so much in advance for your help!
Best, Noetical.
BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

Hi Nick...thanks for taking the time to reply to my question.
Nick Holmes wrote:
What you have there is a mess.
NTSC pixels are never square.
NTSC is 720x486, even when it is Anamorphic.
You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
The same DVD will automatically letterbox on 4:3 TVs.
Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version.
Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

IPhone 3G - thinking of getting one but... what are the potential issues?

I'm thinking of getting an iPhone 3G because:
1. I've been writing iPhone apps with a friend of mine (already have two in the app store) and I think I'm probably the only iPhone developer in the world who doesn't actually own an iPhone himself. My friend and partner in this venture has worked extra time doing actual testing on her original iPhone (and we've had other beta testers too), but there is only so much I can do in the simulator. I can't develop multi-touch or accelerometer features without my own device. And I feel I shouldn't put the entire hardware testing burden on her.
2. I like the iPhone browser and the ability to use apps and a lot of other aspects of the iPhone.
3. I live in Japan, and switching from my AU cell phone to the iPhone is actually a bargain here. There is no money down, and the payment plans start at like $25/month to a max of about $68/month. So it's actually cheaper here than in the U.S. Even adding in the $10-$15 extra charge for 24 months until the phone itself is paid off, it's no more expensive than my current cell phone. And I can keep my current phone number.
So it would seem to be a no-brainer. I should just walk over to my nearest Softbank store and get one, right?
The only thing holding me back is this - every time (and I mean every single time with no exaggeration) that I have ever purchased an Apple portable device, including every single one of my many MacBooks and MacBook Pros over the years and the iPod nano 3G I bought last year, have had problems that needed immediate care and replacement or servicing and, in the case of the iPod 3G that awful "tilted LCD" problem that after 3 exchanges I had to have the consumer affairs office in Tokyo arrange with Apple for me to get a refund on.
I love the systems, I am using my MacBook Pro right now as I write this message (already been repaired twice and the trackpad is acting funny again - glad I have AppleCare), but I dread the mental stress of dealing with getting my new out-of-the-box Apple products fixed. I feel they have quality checking problems with certain of the product lines.
I just know that there is going to be something really annoyingly wrong with the iPhone 3G as soon as I turn it on - like obviously dead pixels, or a tilted LCD like with the iPod nano 3G, or some weird color discolorations, or something loose and jiggly like with my MBP battery cover or ... I don't know... something. It's just happened too often with me to not be wary.
So my question is this. If the Softbank store lets me turn on and check out the iPhone before buying it, what are the things I should look out for?
Are there common, well-known issues with the iPhone 3G that I can check for, similar to the tilted screen issue on the iPod nano 3G?
Any suggestions would be welcome.
I would like to get an iPhone. I just want one with no problems out-of-the-box.
Thanks for any suggestions,
doug
Message was edited by: Doug Lerner2

{quote:title=Doug Lerner2 wrote:}
But if it is something more subtle like "the colors seem wrong" or "the screen is not set straight" it will take more arguing. And I can't stand arguing about stuff like that just to get a good phone.
So... What were the problems you had with your phone?
Well the only reason I got the IPhones was because it was a birthday gift,And the first phone I got was the 16G in white so when we got home My screen was jumping so I said okay maybe if I power my phone off and than cut it back on maybe it will started to work a little better,While it didn't I just made thing worse My screen was only jumping it wouldn't come back on after that,So I was so mad cause we had to drive a 138 miles to get my phone and than my cousin came over and she have the same phone I had just got.But her phone look like she had it for some years the white on the back of the phone had turned a off white.
So we had to drive other 138 miles there and back for me to get other phone and when I made it to the Apple store I didn't know you suppose to call and make appt before you come up there about your phone.So I'm standing up there telling them that I just came yesterday and drove a 138 miles here and back and I just had to turn around and do it again today.So they went on and seen me and ask me what was going on with my phone.So I told them as they can see it was not coming on no more.
So they exchange my IPhone and I didn't get the same color due to how my cousin white IPhone was looking like,So I got a black IPhone instead.
So the new phone I got was working so good and than about two weeks later my phone would blink on and off and it would freeze on you during call's are anything.So you already know what I had to do again I had to drive other 138 miles there and back and I was not happy about that at all.So this time before I went I made appt that morning to come and they told me to come around 200pm but for me to try to be there at least ten minutes early.So I made it there around 145pm they didn't get to me still around 315pm.So when they final call me to go talk to someone about what's going on with my phone.They ask me for my receipt and I let them know I didn't have it cause they didn't give it to me cause yale told me I didn't need it cause yale was going to send it to my email address.
So they went to try to look up my email address,That took them other 30 minutes to find it,But they finial found it in there system.So they went on and exchange my phone again with no problem at all.
So this phone I got was doing so good, I really thought my trouble was all over still I saw a black line running down my screen of my phone.So I had to get on the phone with apple again so I can make other appt for the 3rd time,So I can go up there and bring this phone so they can look at it,Cause I thought maybe I was seening something are it suppose to be on my phone and I didn't know,But to come to find out it didn't suppose to be on my phone so they had to replaces my phone for the 3rd time.
So I bent haveing this phone That I got now about 3 months now and I got to tell you I went through **** and back to get this phone and it's really doing good really love the phone so much I'm so glade that I didn't give up on this phone because I was haveing so much bad luck with getting a IPhone I was about to give up but I am so glade that I kept trying.It really is a great phone to have it have so much on this phone I love it.I just hope I don't have no more problem down the line cause I don't want to go through this again.
I feel were you are coming from cause I wouldn't want nobody to go through what I went through try to getting my phone.
But I'M telling you,it might be worth you going through this at the end..The TV on this phone is so unbelievable I'M telling you,you going to love it.Before I go to sleep at night I listen to my i pod on my IPhone and I love it that's how I go to sleep at night are I might watch a movie that I have on my phone at night.It's a great phone to have all the way around I give it a ten.
And other thing you said you don't like to arguing sometime you just have to do that.you and me have so much in common cause I don't like that my self,I feel like why should I have to raise my voices to get my point a cross that's just crazy to me.
So how long do yale have to exchange something were you stay.

What are the attributes available on Task Status Notification?

Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread Subject

Hi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman

CS3 - What Are the Best Export Settings for Animation?

I have edited a project in Premiere Pro CS3. It is animated, and I want to preserve as much of the quality of the animation as I can.
What are the best possible settings that I can use to export the video to a .MOV file?
A little background info, in case it helps:
The animations were created in After Effects, and the .MOV files were made with the Animation codec.
After editing in Premiere, I exported the finished file to the Animation codec. It looks so-so.
Important: I imported the Premiere Project into After Effects, and exported the project with After Effects. The After Effects Quicktime file looks better than the Premiere version of the Quicktime file. (And has a higher data rate, in case that matters.)
What kind of settings do I need to select in Premiere when I export the video to make the .MOV file look as good as it can?
(And please don't be afraid to dumb it down.)
Thx!

Try an Uncompressed "QT" file. (Component YUV - 10-bit)
BTW: Did your PPRO Settings match the AEFX Comp you exported from?

What Are the Exact Basic rules for Replying a Thread...... -:) @};-

Hi Experts,
After Looking into the forums many days I had a small conclusion about forums,
SAP Forums are better place I have seen for getting a goo dhelp & Knowledge...
Why can't we make it a BEST Place.
This is just a small doubt which I would like to clear myself first,
I have seen many users In the forums asking for a Basic Questions
When cleared, But still they want to have a Spoon feeding with a Sample Code.
When Sample Code Given they will provide the original code and requests for Modifications.
These always looks to me as crazy.
I have seen somelong time agin by moderators posting that In SCN there will be no SPOON FEEDING.
I am not sure whether if still this Rule AVAILABLE or NOT.
Ok if the task is really difficult let them ask again and again,
And it was not replied, let them repost, I agree with them.
And How about a User Registered in SDN very long back and asking for a silly question in below thread,
[Sendin Email to the recipent list -Need correct FM |Getting the address from shipto partner of Bil. item not directly from C.ma]
This is one more example, really funny, The thread poster needs the solution at any cost, he doesn't require and Suggetions,,, {He Only needs Solution}
[Radio Buttons |Radio Buttons;
[Turning Off Debugger |Turning Off Debugger;
[Regarding Amount in words|Regarding Amount in words;
There are 100's of threads like this....Everyone knows this facts.
Check this who answered this one and who replied correct answer, who copied, finally who was rewarded...!
[how to validate POsting period |Re: how to validate POsting period]
Now My Real Problem is....!
User is always intelligent, Only the weakness is in Contributor, trying to help them,..,
And I openly say that Someone requesting for basic help is not DUMB, But the Contributor replying forgets
the basic rules " Why Contributing ?"
According to me It's not the Requestor to see Rules & Requlations before posting the threads,
But its responsibilty for the Contributing person to see th Rules & Requlations before replying the threads,
If we follow the rules and stand on a single word or rule or anything there will be Good Result.
Major Problem is in US not anyone else.
Example Some one saying search in the forum,,, then please no replies after that...
But we are very pity hearted again we post the solution,,,
But it is not at all enough(for cintribtor's)... they will copy the solution and post again by slight Modifications,
And Some users are having 500,600,700,800 Posts with 0 points, registered long long back.
They are completly dependent on forums,,, As they goto office and as they eat, The same they open forums and ask Queries...
They will never realize what they are doing,, and we will never let them improve better...
Finally Lets Discuss About this and Correct & Suggest me if I am wrong,
Is my thoughts are going in the right way or not I am not even sure... Please Aslo Correct me if I did any mistakes.
Thanks & regards,
Dileep .C
Edited by: Dileep Kumar Chinnaiah on Apr 29, 2009 12:33 PM
Title Changed Form
"What to do when someone asking for Basic Questions" to "What Are the Exact Basic rules for Replying a Threads...... "

Hi Stephen,
Very useful Information,
First tell me a little something about my self...
After completion of my certification(as a fresher) I was down the streets hunting the job,
with the insufficient knowledge and being a non-experienced person, I never got one.
And mean while when I got my "S-UserID", I used to be proud, To say frankly, I registerd in SDN & SAP all at a time, without even knowing what I can do there..,
When I got a job afterwords I was doing the job and never seen SDN page for many months,
when I came to know that of we have doubts we can post at SDN. then started requesting help,
I posted only a little, I didnot got the proper response. on that day I decided,
still there are some places where we cannot get help on time and there will be people waiting to get help,
Why cant I put some of my efforts to help others.
Then I searched some topic by Topic in SDN topic by Topic I used to read threads just for knowledge.
when I feel my self comfort for contributing, I started contibuting...!
If you haven't read it, take a look first, so you can understand where things are now.
I dont know where things are now. But these in this thread I mentioned clearly what I seen from the day I started contributing.
I searched with the terms of 'Rules for replying', The results are not as I expected, and this link has subject as
"O SDN, where art thou?" So it dosent hit my in the list.
Like everybody until a certain stage I am also rushing for points.
But I most cases I never tried to copy paste answers. If I done some then that is just to point it myself some day,
I have no hopes or no intrest on the points...! This was discussed with Rob & Matt, at my inital contribution where my points are 36.
From that day till date I have changed a lot to myself.
Everyone cannot change like me because they are not like me & And I dont even expect that...!
I will be online almost 6-8Hrs a day, Not even getting intrest to see the forums just because of the co-contributors.
My only point is I am just requesting to a co-contributor,
Clearly In a example : Lets say contributor has replied to a thread, and if you know that is a correct solution,
please dont reply any more, If you have a better solution than that, then only reply,
Even there is one reply in the thread not a matter, if correct answer leave that query.
If still error persists, Show up with your Idea's...
Dont let down the contributor, by copying his reply and editing and pasting(edit only if incorrect).
I am just looking for this one exactly to circulate between ourselfs.
For this we a little support from moderators to circulate(may be as a rule or may be as a mail to them)
You may say again how many mails we have to send, It dosent matter, one mail to one person one time,
and +ve factors will show up definetly.
A real contributor always understand what I am talking about, but some one who hunts for points will never.
I am really sorry if I am troubling with my doubts & requests,
If so, Pleae forgive me,,
Thanks & regards,
Dileep .C

What are the major issues to consider in code review? Or performance analys

What are the major issues to consider in code review? Or performance analysis?

I would not recommend you to try to optimize performance by checking the coding.
There is the code inspector which can do all which makes sense automatically.
The above mentioned points are not the real issues.
Instead of code review you should execute test cases and measure the exection time.
1. With STAD if you want to get good time measurement
2. With SE30 and ST05, if you want to have data for further anaylsis.
Check total time (SE30), check whether DB part is large, then go to SQL trace. Do the check mentioned here
/people/siegfried.boes/blog/2007/09/05/the-sql-trace-st05-150-quick-and-easy
to find the SQL bottlenecks.
The major point about SQL problems is index support, if there is no proper index support then the performance will be poor. Be aware, that problems are only visible, if you tables are filled.
In a test system where you have very little data, you will never encounter performance problems.
Check also the Top10 of the SQ30 hit list.
Be aware that a proper performance analysis is not a 5 minutes job.
Siegfried

What are the little red squares on the lower left hand corner of a movieclip in the actions panel?

Similar Messages

Maybe you are looking for