What are the methods available to modify standard reports?
What are the methods available to modify standard reports?
<b>Hi,
I think you can copy those reports into Zreports</b>
Similar Messages
-
The big picture is that I'm trying to use labview to interface to a DSP board.
I already have a small windows application "app" which communicates with the dsp. Now I want Labview to grab data from the "app" and plot/analyze ... etc.
I'm a novice at this 'interprocess communication stuff", what can I use to pass data back and forth between between the "app" and LV?
use ActiveX, DMA, streams, etc.?
In a crude sense I could just have the "app" write the data to a file and then have LV read the file. (can two applications read the file at the same time?), but
this seems very slow and clumsy. I'd rather have a RAM based FIFO which both could access.
Thanks!
G
Details:
Pentium120 Windows 95 Host
Spectrum TMSC30 DSP
VC++6
LV6It depends on what 'interprocess communication' your "app" program has available.
I regulary use DDE to control a PLL App which controls our PLL via the LPT Port. This is only a write process, but works very easily. The read is equaly easy. You need to know the various "keywords" like service, topic and instruction which the "app" will respond to.
Generaly I found ActieX to be more extensive, meaning its probably going to take longer and more steps to achive similar simple results.
The file does not seem to be the best way.
Hope that helps a bit. -
What are the methods to modify SAP standard tables?
hi
what are the methods to modify SAP standard tables?.APPEND structures AND CUSTOMIZING INCLUDES.
these are the two methods.. but customizing includes we, as a developers do not use.
generally we use .APPEND structures to modify standard tables.
note that we need an access key to modify atandard tables.
we can create an apend structure and add that structure to the standard table at the end.
note that .append structures should only be added only at the end.
that is the reason we use .append structures to modify standard tables.as we should not include a field in the middle and disturb the original order of the standard table fields as it may effect many objects depending on the standard table.
but Some standard tables for which there is a LONG datatype field can never be modified.
the reason is the LONG datatype field should always be there at the end and also .APPEND strutures should always be there at the end. there will be a conflict. so, some standard tables can not be appended. -
What are the attributes available on Task Status Notification?
Hi,
I need to send the information below when a task is completed or rejected. So I would like to know if they are available. I think so because I've got them from Task Status Notification (OIM standard email definition). If not, what are the attributes available on Task Notification?
<Tasks.Task Name> is <Task Details.Status>.
<Task Details.Status>
<Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
Thanks,
Renato.
Hi,
I have implemented some java code to workaround the problem below... But I don't believe this does'n work in OIM :-):-):-):-) Please, tell me if you are using task status notification in OIM and if your email defintion has the variables below.
Thanks,
Hi,
One of OIM email templates is Task Status Email Notification. I am trying to notify the user (Notification tab) using this template but it didn't work. Even when I set the Object Name and Process Name values for an email definition, it does not work.
How have you implemented task status notification in your workflows? I think if this template exists in OIM, by default, so it is posible to have the information below during notifications.
I think I'll have to call Oracle's Support.
=======================================================
Subject: Process task <Tasks.Task Name> is <Task Details.Status>.
Body:
The Process task <Tasks.Task Name> is <Task Details.Status>.
The details of this process task are as follows:
Process Task Name: <Tasks.Task Name>
Process Task Status: <Task Details.Status>
Resource Name: <Resource.Resource Name>
Target User: <Users.First Name> <Users.Last Name> [<Users.User ID>]
Assigned to: <Task Information.Assignee First Name> <Task Information.Assignee Last Name> [<Task Information.Assignee User ID>]
Response Code : <Responses.Response>
Response Description : <Responses.Description>
Error Details : <Task Details.Reason>
=======================================================
As I've said, the e-mail was sent but in blank:
The Process task is .
The details of this process task are as follows:
Process Task Name:
Process Task Status:
Resource Name:
Target User: []
Assigned to: []
Response Code :
Response Description :
Error Details :
Is it possible to have those fields available on notifications?
Thanks,
Edited by: Renato.Guimaraes on 23/10/2009 08:05
Edited by: Renato.Guimaraes on 24/10/2009 15:57
Edited by: Renato.Guimaraes on 26/10/2009 13:31
I didn't get any answer until now.. Below it is what I've done.
a) Create an entity adapter that is assigned to the post-update of the Specific Task Info data object.
b) Select the task information searching by SCH_KEY, for example (I have to do more tests)
SELECT
sch.sch_key, sch.sch_status, sch.sch_note, mil.mil_key, rsc.rsc_data, rsc.rsc_desc
FROM
osi, sch, mil, rsc
WHERE
mil.mil_key = osi.mil_key and
osi.sch_key = sch.sch_key and
sch.sch_key = ? and
rsc.rsc_key = osi.rsc_key
c) Load the e-mail definition template and replaces the fields
d) Sends the e-mail
With that I solved another problem: I have to send an e-mail always the assignee adds a note to the task.
Edited by: Renato.Guimaraes on 28/10/2009 08:51. How I did that
Edited by: Renato.Guimaraes on 12/11/2009 12:19
Edited by: Renato.Guimaraes on 13/11/2009 07:22 Changed the Thread SubjectHi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman -
What are the methods called while navigating from one applet to another one
Hi All,
Could any one brief me about "When you navigate from one applet to another what are the methods called ?".
Thanks in advance.
Best Regards,
N.Madhusudhanan.http://forum.java.sun.com/thread.jsp?forum=421&thread=426771&tstart=0&trange=100
-
What are the commands available to read a file from application server and
What are the commands available to read a file from application server and store the file into an internal table?
Hi,
To read a file from an Application Server to an Object there is a command in ABAP called <b>READ DATASET</b>. After that file is transported to that object you have to do a loop and put that data in an Internal Table.
This statement exports data from the file specified in dset into the data object dobj. For dobj, variables with elementary data types and flat structures can be specified. In Unicode programs, dobj must be character-type if the file was opened as a text file.
For dset, a character-type data object is expected - that is, an object that contains the platform-specific name of the file. The content is read from the file starting from the current file pointer. After the data transfer, the file pointer is positioned after the section that was read. Using the MAXIMUM LENGTH addition, the number of characters or bytes to be read from the file can be limited. Using ACTUAL LENGTH, the number of characters or bytes actually used can be determined.
In a Unicode program, the file must be opened with an arbitrary access type; otherwise, an exception that cannot be handled will be triggered.
If the file has not yet been opened in anon-Unicode program, it will be implicitly opened as a binary file for read access using the statement
OPEN DATASET dset FOR INPUT IN BINARY MODE.
. If a non-existing file is accessed, an exception that can be handled can be triggered.
Influence of Access Type
Files can be read independently of the access type. Whether data can be read or not depends solely on the position of the file pointer. If the latter is at the end of the file or after the file, no data can be read and sy-subrc will be set to 4.
Influence of the Storage Type
The import function will take place irrespective of the storage type in which the file was opened with the statement OPEN DATASET.
If the file was opened as a text file or as a legacy text file, the data is normally read from the current position of the file pointer to the next end-of-line marking, and the file pointer is positioned after the end-of-line marking. If the data object dobj is too short for the number of read characters, the superfluous characters and bytes are cut off. If it is longer, it will be filled with blanks to the right.
If the file was opened as a binary file or as a legacy-binary file, as much data is read that fits into the data object dobj. If the data object dobj is longer than the number of exported characters, it is filled with hexadecimal 0 on the right.
If the specified storage type makes conversion necessary, this is executed before the assignment to the data object dobj. Afterwards, the read data is placed, byte by byte, into the data object.
System Fields
sy-subrc Meaning
0 Data was read without reaching end of file.
4 Data was read and the end of the file was reached or there was an attempt to read after the end of the file.
Thanks,
Samantak.
<b>Rewards points for useful answers.</b> -
What are the frameworks available out there
I just want to know what are the frameworks available out there for Desktop application ?
I want to create a standalone application in Java and I heard that I can make it easier if I follow a framework.
After having a look at frameworks for Java, it just completely confuse me, as it is very different from frameworks for Flash (which I do most).
The java framework covers much more stuff than what Flash framework covers (which mainly regulate the way how the SWF communicate with the server and the design of the classes )
I still wonder what is the definition of framework in Java ? Do I really need one for a standalone application, or I just need to follow the MVC design for my classes ?
I just need to get it right before I actually work on my program.
Thanks. -
What are the bapi available of md07
Hi friends.
what are the bapi available for 'MD07'. actually i need particular material no details for open stock and closing stock and Ist RDS and 2nd RDS value.
anybody tell usefull answer.
regards
pauldharmaHi Dharma,
Check out this:
BAPI_MATERIAL_STOCK_REQ_LIST
Thanks
Gurjot S -
What are the enhancements available for LIS?
What are the enhancements available for LIS?
Hello,
Check if this weblog may help you:
/people/vikash.agrawal/blog/2006/12/18/one-stop-shop-for-all-your-lo-cockpit-needs
There, you have a good article about this on link: Enhancing LO DataSource Step by Step
Kind regards,
Edited by: Bruno Garcia on Jun 3, 2008 12:24 PM -
What are the tools available for gps NMEA data streams reception ?
Since no software for bluetooth connection for my Holux GPS device to my iPad2, I plan to write one myself. What are thr tools available and what is the simplest development platform just for this simple task? That is just to read the NMEA ASCII stream from the Bluetooth device.
It depends on what 'interprocess communication' your "app" program has available.
I regulary use DDE to control a PLL App which controls our PLL via the LPT Port. This is only a write process, but works very easily. The read is equaly easy. You need to know the various "keywords" like service, topic and instruction which the "app" will respond to.
Generaly I found ActieX to be more extensive, meaning its probably going to take longer and more steps to achive similar simple results.
The file does not seem to be the best way.
Hope that helps a bit. -
What are the steps in creating a customised report?
Dear Experts,
can you help me with your expereince what are the steps involved in creating a customised report?
Who generates the requirement?
Who prepares the functional spec and what information it contains?
Who approves the functional spec once it is prepared?
You can take the followig case as an example:
The customer requirement is that a report can be run for everything that is received in a given area and compare the price at which the material was received to the standard or moving average price in SAP.
Here, what information you will give to ABAP ers to devlop the report?
I would appreciate if anyone can help me with the entire process.
Full points to be awarded for a satisfactory reply.
Regards,
Ranjanhi
>Who generates the requirement?
client or end user
>Who prepares the functional spec and what information it contains
there should be a specific format and it is to be filled by the functional consultant
http://www.sap-img.com/general/what-are-functional-specification-in-sap.htm
http://erp.ittoolbox.com/groups/project-management/erp-projectmanagement/samples-for-sap-functional-specification-1194336
>Who approves the functional spec once it is prepared?
abaper or the TL
http://sap.niraj.tripod.com/id67.html
get the proper info from ur customer as what means all information
get the proper fields he required
regards
KI -
What are the Connectors available for KM file repository?
Hi All,
Which are different connectors available for KM?
Apart from below list
Windows File Server
Web Servers (HTTP)
WebDAV compliant servers (MS Sharepoint, MS Exchange Public Folders, LiveLink)
mySAP PLM DMS
SAP Knowledge Warehouse
Lotus Notes
3rd Party DMS (Filenet, IXOS)
EP KM repository
is any of above connector is not used now a days??
These are the list given in documentation of EP 6.
So if in EP 7, if they have included more or removed any then please let me know
Regards,
PuravHi
There is another connector for KM
DMS CONNECTOR FOR KM
Thanks -
What are the methods used for creating customer
i have to upload a text file and create customer using idoc .can any one suggest the methods used to fullfil this requirement
Hi,
Upload the file using the function module GUI_UPLOAD into an internal table then try to pass the values from the file to the segments in the idoc DEBMAS03 using the function module MASTERIDOC_CREATE_DEBMAS to create the customer.
Any doubts regarding you can clarify.
Thanks&Regards
Sarves -
What are the css available in OAF?
Hi,
We use CSS in item static styled text.
For example CSS=OraInstructionText.
May I know like that what kind of CSS available.
Thanks,
LavanHi Lavan,
•OraFieldText :Updatable Fields
•OraDataText :Display Only Fields
•OraPromptText :Used for Prompts, Checkboxes
•OraLinkText :For Links/URLs
•OraInstructionText :For Plain Text Instruction
Please refer below link for more detail.
http://www.scribd.com/doc/62704815/CSS-Styles
Thanks,
Dilip -
What are the variables available on 0CALDAY
HI EXPERTS,
I want to know the list of variables on a 0calday.How can i know?
Can i get this information for all the standard characteristics / time chars.?
Beacause ,when i open my query designer ,i see only few variables under the characteristic 0calday.
For example,
when user enters a date, i need to show him both entered date and entire months in next column.
so i need to find.Is there any SAP variable available already for this purpose?
I aslo have some columns.........etc,,
Can any one help. me..
Regards
LaxmanHi Experts,
I want to extend my doubt a little more.
I have a requirment as below.
User will enter a range of Date say 01.06.2011 to 25.06.2011.
I need to show him data in two columns one cloumn for the entered day range and second column for prevoius month date rangei.e(01.05.2011 to 25.05.2011)
can i achive this without using Customer Exit.
Regards
Laxman
Maybe you are looking for
-
Firefox deleted my downloads can they be restored?
I run Firefox 28.1.0 latest version. my tablet is a nook HD + software 2.20 I accidentally delete and yes on the downloads page. It was a complete accident. I have a neuromuscular problem. Is there any way to fix it? Thanks for answering in advance.
-
Installing WXP on new Satellite Pro L550
Hi, I have a new Sat Pro L550 and need to downgrade to XP. If I want to go back to Windows 7 in future can I? Thanks, Lisa
-
Pick Release using backend API
Hello All , I am trying to pick release one sales order using standard API WSH_DELIVERIES_PUB . I am using the below block. DECLARE -- Standard Parameters. p_api_version NUMBER; p_init_msg_list VARCHAR2(30); p_commit VARCHAR2(30); --Parameters for WS
-
When try to add COPA-charecteristics (tcode: KEA5) getting DUMP
Hi Experts, When we try to add a new COPA-charecteristics with tcode KEA5 , we are getting below dump. Runtime Errors DATA_LENGTH_0 Exception CX_SY_RANGE_OUT_OF_BOUNDS Date and Time 01.11.2011 10:12:11 Short text: In
-
Master Data Datasource Enhancement or Custom Datasource
HAI Im implementing the BI7.0 for procurement. We need to the data for VENDOR from XK03(T-code). In XK03 , we have some custom defined class and its charateristic values . So if i want to use 0vendor then i need to enhance the standard datasource of