What are the relevent steps to take in tracking a lost iphone 5 taking into account that the battery was dead at the time

You would have neede to have "Find my phone" activated on the iphone
Log into icloud https://www.icloud.com/ and track.

Similar Messages

What are the time units dsiplayed in timeline?

this might be a dumb question, but I wanted to time an event I taped with my sony hd camera. i imported the clip into pe 9 and tried to judge the time by looking frame by frame at the timeline. the units appear like this 01:30;25. but the final two digits jump from 25 to 00. what the heck does that mean? are these frame units, seconds, a novel timekeeping system invented by adobe? i realize a video camera is not a timekeeping instrument, so perhaps I'm asking too much...but now I'm curious... what are these units displayed in the timeline, and why do they jump at the increments they do? set by my sony camera? or adobe?
thanks...
david

David,
For most recorded footage, it is 29.97, though there are a few cameras, that really do shoot at 30 FPS. Using Interpret Footage, and looking at the FPS, should give you the real detail.
Unfortunately, camera mfgrs. play a tad "fast and loose" with their exact specs. It is tough to get to the real answer, to the question that you are asking.
Going back decades, stereo equipment mfgrs. used some "highly inflated" wattage numbers, and the consumers were first confused, and then a bit outraged. In time, they settled on more realistic numbers, and terms. Do you remember the RMS (Root Mean Square) wars with auido gear?
Wish that I had a 100% accurate answer for you.
Hunt

US-PY-PT What are the time of wage types?

Gurus,
I am new to HR and have some basic questions.
I read some documentation and need some clarifications.
1. What is time wage type?
    All the wage types created in B2 cluster (assuming PT component is enabled).
2. What is non-time wage type? (also refered as dialog wage type)
     All wage types created by PA30 infotypes.
    The only exception is 2010 which can have user
     entered wage types. If enter wage type has only number - then it is time wage type. Otherwise, it
     is non-time wage type.
Do I understand this correctly?
Are there any changes needed for the above two statements?
Please help...
Thanks,

Dear,
1. What is time wage type?
Time Wage types are generated during time evaluation with their amount as only NUm field is there for time wage types as Overtime hours
2. What is non-time wage type? (also refered as dialog wage type)
Valuation of non time wage types are done out of Time Evaluation . Like wage types entered in IT 0008 , 0014, 0015 etc
3.
In IT 2010 we can enter Time wage types as well as other wage types even this IT is used for enttering Overtime wage types
Warm Regards,
Kapil Kaushal

Icloud oin device is signed into account that has been deleted so cannot signout of it. what can i do?

icloud on iphone is signed into account that has been deleted/inactive and cannot signout of it as no pw is available and cannot reset it either as it doesn't find the apple id back. what can i do?

Welcome to Apple Support Communities
Do not worry. Hold Sleep (the button you have at the top of the phone) and Home buttons at the same time until your phone restarts, and then try installing the iOS update again.

What are the steps would liket take using AR,AP,GL Datasource in R/3

Hi,
When i would like to use SAP content data source Like ,AR,AP,GL
data source what are all the master data need to activate for this.
Ex: for AR we need to activate the Customer master data
what abt AP,GL what are the master data need to be activated while using SAP content data source in R/3.

<i>What are the steps i need to do in source system?.First of all identify the data source and what are the master data need to be used for the data source like AP,AR,GL in R/3.</i>
Find out what Cubes, ODS's will be used - > HELP.SAP using the datasource.
Activate transaction datasources.
See Infosource Overview and activate relevant master datasources in RSA5 - ECC.
Install content on BI side.
It doesnot matter what datasources you activate first, it is just a preferred way to load transaction data only after master data.
<i>What are all the masterdata need to activate before going to activate AR,AP,GL data source in R/3.</i>
Infosource Overview

What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?

Hello All,
What are the steps needed to make the field in the DFF Additional Information for Agent only take numbers, commas & hyphens?
Navigation
Bob Sales manager<Ebiz form<service request tab<SR type<DFF<additional information for agents <cheque number
The field Cheque number Character allowed (, -) in the DFF Additional Information for Agent should only take numbers
Thanks & Regards
Ayesha

Thanks Sridar
If we use Number we cannot separate the cheque numbers with , or -
We need to enter numbers along with comma and '_' in cheque number field.
Thanks & Regards
Ayesha

Hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

hi i have an iphone 4 which is from canada nd i have seen one sim inside it which is a canadian sim ,iam staying in india so can i use that phone in india and please tell me what are the steps ihave to take for using that canadian phone in india

Only the carrier to whom the device is locked can authorize it's unlocking. Contact the carrier to see if they offer unlocking and if you qualify.

I have creative suite cloud products installed on my work computer. What are the steps I need to take to install them on my home/back up computer?

I have creative suite cloud products installed on my work computer. What are the steps I need to take to install them on my home/back up computer?

just log into your account and start downloading your apps, https://creative.adobe.com

Recently bought a MacBook Pro And sometimes Delete key is detached (loose). I would like to know what are the steps to take to repair it?

Recently bought a MacBook Pro And sometimes Delete key is detached (loose). I would like to know what are the steps to take to repair it?

If it is within the warranty period, take it in to an Apple store genius bar for repair.
Ciao.

I have a macbook with Tiger. What are the steps I need to take to upgrade to Lion and the cloud? I have the Snow leopard disk just received from Apple.

What are the steps I need to take to upgrade my Macbook with Tiger to Lion and the cloud? I have the install disk for Snow Leopard.

Hi Carol, good/sound advice by Ziatron so far.
We need more info about your Mac to see if it will even be capable,
So we know more about it...
At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: iMac
Model Identifier: iMac7,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.4 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 6 GB
Bus Speed: 800 MHz
Boot ROM Version: IM71.007A.B03
SMC Version (system): 1.21f4
You'll need to buy SL/10.6 first & get it to 10.6.8, then get Lion... if you can run it.
Or if you can erase your disk...
http://store.apple.com/us/product/MD256
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
    * DVD drive for installation
    * Some features require a compatible Internet service provider; fees may apply.
    * Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It looks like they do still have it:
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
Snow Leopard/10.6.x Requirements...
Lion/101.7 System requirements
    •    x86-64 processor (Macs with an Intel Core 2 Duo, Intel Core i3, Intel Core i5, Intel Core i7, or Xeon processor.)
    •    At least 2GB of memory, (I say 4GB)
    •    Latest version of Mac OS X Snow Leopard (10.6.8), with the Mac App Store installed
    •    At least 4GB of disk space for downloading, (I say 40GB at least)
Like Snow Leopard, Lion does not support PowerPC-based Macs (e.g., Power Macs, PowerBooks, iBooks, iMacs (G3-G5), eMacs).
Lion also does not support 32-bit Intel Core Duo or Core Solo based Macs. Rosetta is no longer available in Lion, which means Lion no longer supports PowerPC applications.
It looks like Apple will have Lion available on USB drives for $69...
http://store.apple.com/us/product/MD256

What are the steps in cin

hi genius
This question asked by tcs what about cin, what are the steps in cin . What is
the use of cin, I told cin consist of j1nfac ,j1nexp, j1nedp,j1nstk but he is asking
how do u configure by step by step how do u do in ides step by step can any one help

Dear nag nageshwar,
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
Enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
This start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
Indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilisation
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, Multiple credit
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to availa the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no create' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock .
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity, you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
Make the settings in Customizing Basic India for Logistics General, by choosing Taxes on Goods Movements Account Excise Duties Using Condition Technique and Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose .
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Excise Rate Maintenance screen, which you can Master Dataaccess from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
Similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
Each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use : In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax On Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
You have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use subtransaction types, enter the accounts for each subtransaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for alltransactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
 Material Master  Logistics General 1. Go to IMG Define Structure of Data Screen for eachConfiguring the Material master Screen Sequence.
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Hope this helps you.
Do award points if you found them useful.
Regards,
Rakesh
P.S. you can send me a mail at my mail id [email protected] for any specific details

What are the config steps for contract mass change and quota arrangement?

Hi friends
what are the config steps for contract mass change and quota arrangement?
Regards
Raj Kumar

Process Flow
The mass change process consists of four steps. You navigate between these steps by choosing the Next and Back buttons located at the bottom right-hand corner of the screens.
       1.      Search for contracts
You search for and select the contracts or the contract hierarchy that you want to change.
Contracts that have the status Closed cannot be changed.
       2.      Define mass changes
You specify the changes you want to make.
You make changes at header data level and at item data level by choosing the relevant change methods. A green tick appears next to each change parameter so that you can see where changes are already active.
Once you enter this step, the documents you have selected to be changed are locked so that other users cannot make changes to them until you are finished with this process.
       3.      Simulate mass changes
Here you can perform a trial run of your mass changes. This simulation step is optional.
We recommend that you perform this step so that you can check how the change methods you have chosen will be processed by the system.
You receive status messages about the change methods for each contract and can quickly see whether any errors arise in connection with the proposed changes at this stage. From this step, it is easier for you to go back and correct the error than after applying the changes.
Background processing
The system processes the changes in the background.
If there are a large number of contracts to be processed, this step could take some time to complete. In this case, you can leave the transaction so that you can, for example, carry out other tasks in the meantime.
The system sends you an e-mail once the simulation step is complete. The e-mail contains a link to the relevant screen in the application so that you can return to it when it is convenient for you to do so. If you have left the SRM application, you can only return via this link.
Here you can see the status of the changes and, if necessary, you can correct any errors by going back to the Define mass changes step.
The messages that you receive in the simulation step are not confirmation that a change has been performed. They simulate the messages you get after you apply the changes. You must complete the final step of the mass change process and apply the changes before they take effect.
       4.      Carry out mass changes
Here you apply the changes to the contracts.
You cannot reverse this step, which is why we advise you to perform the simulation step beforehand.

Migrate from taxinj to taxinn what are the precautions to take, what will

CAN ANYONE HELP ME, FOR MY CLINENT THE REQUIREMENT IS TO CHANGE FROM EXISTING TAXINJ PROCEDURE TO TAXINN, THE ARE CHANGING FROM TAXINJ TO TAXINN ..BCAZ IN THE CURRENT TAXINJ PROCEDURE THEY ARE MAINTAINING 300 TAX CODES FOR 20 COMPANYCODES AND 190 PLANTS, 250 LOCATIONS. 1230 ENDUSERS.
SO THEY ARE COMING ACROSS DAY TO DAY PROBLEM.
BOFORE GOING TO MIGRATE FROM TAXINJ TO TAXINN WHAT ARE THE PRECAUTIONS AND IMPLICATIONS NEED TO BE TAKE INTO CONSIDERATIONS.
FROM BUSINESS POINT VIEW, WITHOUT DISTURBING MASTER DATA,
CAN ANYONE HELP URGENT.
THANKS IN ADVANCE
CHEERS
SRINIVAS.ANGAJALA

hi GK
When u delete the request in ODS or CUBE u want to delete the available data on those targets.
For deleting the datas in the targets u just right click on the ods or cube and give delete data so that if there is a data in the target it gets deleted. this is the main step u want to do when u reconstrcut the request and after doing this u can direclty schedule data to the target.
In targets after completing the data transfer process activate it to get that data in report also. dont forget to do this
In psa level there is no problem u can go and directly delete the request.
Assign points and gain some points in SDN
cheers
bye

What are the steps to follow after you install a new Hard Drive on a 17in Macbook Pro mid 2009

I plan on installing a larger Hard Drive..the physical part is simple..but what are the steps after you close it up and hit the power button? Is there softwre on the mother board that will start the unit running??

A new Hard drive will not be Mac-formatted, so you will have to do that first. A copy of Disk Utility to do the job is also on the 10.6 Installer/Utilities DVD.
Boot to the installer DVD, but do not Install. Answer only the "what language" question, and wait a quarter minute for the menuBar to be drawn. Choose Disk Utility from the Utilities menu that appears.
Select the Hardware_name of the new Drive. Partition, one partition, ( Options ), GUID partition table. Name the partition: MacIntosh HD and choose Format: Mac OS X Extended (journaled). It will complete in a minute or two, as it only rewrite the Directory area.
If you wish to shake out your drive, you can erase it and Security Erase, Zero all data, one pass. But this takes HOURS.

What are the steps in creating a customised report?

Dear Experts,
can you help me with your expereince what are the steps involved in creating a customised report?
Who generates the requirement?
Who prepares the functional spec and what information it contains?
Who approves the functional spec once it is prepared?
You can take the followig case as an example:
The customer requirement is that a report can be run for everything that is received in a given area and compare the price at which the material was received to the standard or moving average price in SAP.
Here, what information you will give to ABAP ers to devlop the report?
I would appreciate if anyone can help me with the entire process.
Full points to be awarded for a satisfactory reply.
Regards,
Ranjan

hi
>Who generates the requirement?
client or end user
>Who prepares the functional spec and what information it contains
there should be a specific format and it is to be filled by the functional consultant
http://www.sap-img.com/general/what-are-functional-specification-in-sap.htm
http://erp.ittoolbox.com/groups/project-management/erp-projectmanagement/samples-for-sap-functional-specification-1194336
>Who approves the functional spec once it is prepared?
abaper or the TL
http://sap.niraj.tripod.com/id67.html
get the proper info from ur customer as what means all information
get the proper fields he required
regards
KI

What are the relevent steps to take in tracking a lost iphone 5 taking into account that the battery was dead at the time

Similar Messages

Maybe you are looking for