What are theSNP Settings required for Forecast Consumption with Sales Order

Hello APO Folks,
I have one SNP scenario:  (We don't have GATP)
Forecast for Finsihed Product - "PNG_Fert" in Location "1000".
I have forecast quantity of 500, now our requirement is - when SNP heuristic run will take place (without any sales order quantity) then there should not be any planned orders creation.
Planned order creation should happen Only if any one places sales order from ECC , which comes to APO then against that sales order forecast quantity should consume and should create the planned orders equal to the nos. of sales order quantity.
So if I have forecast of 500 qtys and sales order of 90 qtys then heuristic run should yield/create the planned order of 90 qtys and there should be 500-90 = 410 forecast quantities remaning.
Please let me know which strategy will be used and other setting in ECC and APO for SNP. I
The setting with strategy 50 in ECC and 30 in APO worked properly with PPDS - RRP3 view but from interactive planning /sapapo/sdp94 it is not working, so there will be different setting for SNP.
Thanks in Advance,
Regards,
Vishal
Edited by: Vishal24a on Oct 13, 2011 9:15 AM

Vishal
Can you please explain what issue you are facing when you load the product in planning book. First thing is do you see 410 against forecast and 90 against sales order key figure ? If yes then it means the forecast is getting consumed properly by SO.
As far as your other requirement  goes (planned order should only be created for sale order quantity) you have to change your total demand macro calclation logic. Your total demand key figure should show 90 instead of 500 - so just include sales order in your total demand calculation (stock balance macro) and run heuristic. Your requirement will be satisfied
Thanks
Aparna

Similar Messages

  • Settings required for Forecast Consumption with Sales Order

    Hello Folks,
    I have one scenario:
    Forecast for Finsihed Product  - "PNG_Fert" in Location "1000".
    I have forecast quantity of 500, now our requirement is - when SNP heuristic run will take place (without any sales order quantity) then there should not be any planned orders creation.
    Planned order creation should happen Only if any one places sales order from ECC , which comes to APO then against that sales order forecast quantity should consume and should create the planned orders equal to the nos. of sales order quantity.
    So if I have forecast of 500 qtys and sales order of 90 qtys then heuristic run should yield/create the  planned order of 90 qtys and there should be 500-90 = 410 forecast quantities remaning.
    Please let me know which strategy will be used and other setting in ECC and APO.
    Thanks in Advance,
    Regards,
    Vishal

    Hi,
    Please use planning strategy "PLANNING WITHOUT FINAL ASSEMBLY". Strategy 50 in ECC and 30 in APO. In this you can have forecasts and you can do the planning for the forecasts. But the planned orders created cannot be converted to production order. When the sales order comes in the forecast will be consumed and only for the sales order quantity a new convertible planned order will be created.
    Also the forecast and sales orders will be handled in different segments. This will help you to clearly track the changes.
    If you don't want to handle the sales orders in MTO segment, then the same can be achieved by using strategy 52.
    For more information please check the below link,
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/cb/7f9b7043b711d189410000e829fbbd/frameset.htm
    Regards,
    Manimaran M.

  • What are the settings required for QM in procurement

    Hi Team,
    What are the settings required for QM in procurement. I have  set indicator for QM in procurement in QM view in material master.
    I am not clear about  following fields to be maintained in QM view.
    QM Control Key
    Certificate type
    Target QM system
    Tech. delivery terms Indicator.
    Please suggest me in which case to be used this fiels. Is it relivant to Quality Certificates.
    Thanks

    Hi,
    All meaning are
    QM Control Key :
    If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement.
    Certificate type :
    Certificate types applies to the Certificate processing in procurement  &  Certificate creation
    Target QM system :
    whether the vendor's verified QM system, according to vendor master record or quality info-record (for a combination of vendor/material) meets the requirements for QM systems as specified in the material master
    -  If you activate the indicator for QM in procurement in the material master record at the client level, you must also store a control key at the plant level for quality management in procurement. If you want Procurment control then accordingly define Control Key.
    -  If you want Vendor's perticular certificate for Material then you have to define Certificate type.
    Also, you have to maintain Material, Vendor's Info record at plant level.
    Thanks,
    JM

  • User exits/BAdIs for Forecast consumption by sales order

    Hello Experts,
    My question here is: When Sales Order either new or change comes from ECC to APO, what are key fields considered for Forecast Consumption? Is requirements strategy is considered from location product master or Sales Order brings own data from ECC into it's own structure? I have read from SAP help or documentation that Sales Order coming from ECC does not use requirement strategy from Product Master. Rather it get its own fields like planning strategy/group / requirement class from ECC. It uses location product master only to get consumption parameters like forward/back word consumption days. So I am thinking to use some user exits or BAdIs to enhance the incoming sales orders to consume separate forecast categories in APO.
    My requirement is:
    For the same one product we want sales orders (can have two different order types or identify by a custom field) to consume two different order categories (ie. FA & FC) by enhancing incoming sales orders. So we have regular 1)Forecast key figure which is 'FA' category and 2)Forecast Additional key figure which is FC category. When we release two separate forecasts from DP we release into these two key figures and categories. Now we want incomping sales orders to consume these two categories separately when our sales orders are having two different order types (i.e OR and ZR).
    I want to kow what way we can acomplish this? Are there any user exits or BAdIs for this purpose?
    I looked arount BAdI /SAPAPO/DM_BADI_CSP and I am not quite sure it's going to help. Are there any others?
    I appreciate if anybody explain me the process?
    Thanks in advance!
    Raj

    Standard Logic --- Whatever plant is visible in the Sales Order, the sales order will appear under that Product Location in SNP
    There is no standard way of making the sales order visible in another location.
    Depending on your requirement(Ex: Forecast Consumption, planning etc),using APO-BW we can simulate the requirements in the other plant which can be a nightly run and not immediate.
    Now coming to your question, if the delivering plant is A, how does ECC Delivery document know when the sales order has plant B that the delivering plant is A.
    Can you be more specific.
    THanks
    Kumar

  • What are network settings required for starting Web Dynpro for ABAP

    hi,
    I am learning Web Dynpro ABAP  from SDN e-tutorial.
    While creating view, the layout is displaying following error message
    "Network Access Message: The website cannot be found . The IP address for the website you requested could not be found. "
    Please guide about network settings needed in order to work in webdynpro ABAP.
    I am working on SAP system's
    Component version    SAP ECC 6.0
    Regards,
    Tanaya
    Edited by: Tanaya A on Oct 8, 2008 12:53 PM

    Hi,
    I have made entry in Microsoft Window's drivers>etc> host, but still following error message is coming "The IP address for the website you requested could not be found."
    Technical Information (for support personnel)
    Error Code 11001: Host not found
    Background: This error indicates that the gateway could not find the IP address of the website you are trying to access. This is usually due to a DNS-related error.
    Date: 10/10/2008 12:07:26 PM
    Server: SURFCONTROL.odc.infotech.com
    Source: DNS error
    I think that i also need to make configuration settings in SAP.
    Please guide me further.
    Regards,
    Tanaya
    Edited by: Tanaya A on Oct 13, 2008 11:37 AM

  • What are the settings required to block a particular IP to make connection on particular port no running on another IP?

    Problem:
    -   What are the settings required to block a particular IP to make connection on particular port no running on another IP?
    Environment:
    Operating System            : - Windows XP Service
    Pack 1
    System type                     : - 32 – bit Operating System
    Description: - We
    have requirement to block Port access from particular IP. It is specific requirement for a machine.
    We have service which is running on
    Server with IP: - 10.14.15.116 on
    Port Number 3366 and we need to
    block Client Machine IP: - 10.14.15.114 to make
    any connections with server on this port. Not even client machine
    should be able to telnet on server on port 3366.
     I
    will be really thankful.
    For any kind of input which can assist us to complete the requirement.

    Does it allow in same way with firewall setting in Windows Server 2008?
    I will read in details shared link, but as a matter of urgency; kindly let us know, if we can follow some concise instruction to do above activity.
     I
    will be really thankful

  • What are the Things required for BI 7.0 Implementation project

    Hi Friends,
                      Can any one suggest me
    1.What are the Things required for BI 7.0 Implementation project?
    2.System Configurations & Hardware Components?
    3. Any additional steps...
    plz suggest me.
    Regards

    Hi lakshmi,
    http://csc-studentweb.lrc.edu/swp/Berg/articles/PM_2006_upgrade_NW2004s_Bjarne_Berg_v12.ppt#426,3,Why Upgrade u2013 end of supportu2026
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b8d163a7-0301-0010-d9b0-98f692ea3c60
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/2e8e5288-0b01-0010-2ea8-bcd4df5084a7
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/472443f2-0c01-0010-20ab-fbd380d45881
    https://wiki.sdn.sap.com/wiki/x/JYk
    Check the following links.
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/84bf4d68-0601-0010-13b5-b062adbb3e33
    check the following
    http://help.sap.com/bp_biv235/BI_EN/html/bw.htm
    business content
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20co-pa%20extraction%203.0x
    https://websmp203.sap-ag.de/co
    http://help.sap.com/saphelp_nw04/helpdata/en/37/5fb13cd0500255e10000000a114084/frameset.htm

  • What are the versions required for JBOSS,JDK and ORACLE to setup the ATG 10.2.

    Hi Folks,
    Could you please share, What are the versions required for JBOSS, JDK and ORACLE to setup the ATG 10.2.
    Thank you.

    In case you don't have access to MOS :
    JBOSS : 5.1.2 EAP
    JDK : 1.6.0_38
    ORACLE :
    Oracle Exadata5
    Oracle 10gR2 (10.2.0.3)
    Oracle 10gR2 RAC (10.2.0.3)
    Oracle 11gR2 (11.2.0.2.0)
    Oracle 11gR2 RAC (11.2.0.2.0)

  • What are the infotypes required for maintaining benefits....

    Hi
    Please help ...
    What are the ingotypes required for maintaing benefits....

    Hi Srikanth,
    Please find below the list of Infotypes required for maintaining benefits:
    1. General Benefits Information (Infotype 0171)
    2. Adjustment Reasons (Infotype 0378)   
    3. Health Plans (Infotype 0167)  
    4. Insurance Plans (Infotype 0168)  
    5. Savings Plans (Infotype 0169)  
    6. Flexible Spending Account (Infotype 0170)  
    7. Miscellaneous Plans (Infotype 0377)  
    8. Family/Related Person (Infotype 0021)
    There are also other benefits infotypes e.g. Stock Purchase Plans (Infotype 0379), Credit Plans (Infotype 0236) and many COBRA and retirement plan infotypes but these are used based on the company requirement.
    I hope this helps.
    Regards,
    Anand Jalan
    Edited by: Anand Jalan on Jan 6, 2010 9:50 PM
    Edited by: Anand Jalan on Jan 6, 2010 9:52 PM

  • What are the jars required for prepare portlet tool?

    what are the jars required for prepare portlet tool which converts portlets to .portlet.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are the roles required for MSS

    What are the roles required for MSS in R/3.
    I have created ESS roles. But need to find for MSS.
    I am able to see the PERNR in ESS on portal which created in R/3.
    I need to get my staff on portal.
    What config is required for this.
    MSS User.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are the ports required for the Audio, Video and A/V conferencing when the following end points are enabled for QoS in Lync 2013 server?

    Hi All,
    What are the ports required for the Audio, Video and A/V conferencing when the following clients are enabled for QoS in Lync 2013 server?
    Client Type
    Port range  and Protocol required for Audio
    Port range and Protocol required for
    Video
    Port range and Protocol required for
    A/Vconferencing
    Windows Desktop   Client
    Windows mobile App
    Iphone
    Ipad
    Andriod phone
    Andriod Tablet
    MAC desktop client
    Please advise. Many Thanks.

    Out of the box, 1024-65535 for all of the client ports.  :) 
    https://technet.microsoft.com/en-us/library/gg398833.aspx
    You'll want to tune your client ports a bit
    https://technet.microsoft.com/en-us/library/jj204760.aspx as seen here, and then the client ports would use those ranges which is easier to set QoS markings.  I'm not sure the mobile clients respect that setting.
    Elan's got the best writeup for Windows clients here:
    http://www.shudnow.net/2013/02/16/enabling-qos-for-lync-server-2013-and-various-clients-part-1/
    However, the marking of the packets is the tricky part.  Windows can do it via Group Policy, but for the other clients you'll need to have the network specifically prioritize ports regardless of DSCP markings.  You have to do it based on ports
    as the traffic could be peer to peer.
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
    SWC Unified Communications
    This forum post is based upon my personal experience and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • What are the system requirements for iMac for Photoshop CS6?

    What are the system requirements for iMac for Photoshop CS6?
    Just installed it and get a message saying it doesn't work on "this type of Mac".
    I have an iMac a few years old.....and Dual Core.

    System requirements | Photoshop

  • What are the network requirements for the Remote Panel Server?

    What are the network requirements for the Remote Panel Server?
    I've been trying for a while now to setup a Remote Panel.  I can connect to my computers remote panel from other computers on my LAN but nowhere else.  
    When ever I use the web publishing tool it gives me a URL in this format:  http://Computer-Name.Corporate-Name.local:8086/VI-Name.html Apparently this means I have a local DNS server and this URL has no meaning from the public.
    When I try connecting with the Operate>>Connect to Remote Panel..., I get this error message:
    "Connecting to remote panel server...
    Remote panel connection refused by specified server: Make sure LabVIEW Web Server is enabled on specified server"
    I got the same error when I tried to host a remote panel from my laptop at home, on my Wi-Fi.  Is there some network or firewall setting I'm not seting?  Could it be my server or router or private network?
    My goal is to be able to host Remote Panels from my laptop while I am travailing internationally, by using 4G mobile internet.  Is that even passable?
    Solved!
    Go to Solution.

    Over_Nyquest
    Have you enabled the Remote Panel Server in the Web Server options on the server?
    Kyle B  |  Product Support Engineer  |  ni.com/support

  • What are the specific requirements for scalability?

    Hi
    what are the specific requirements for scalability?
    for a share point  internet portal
    adil

    Hi  Adil,
    According to your description, my understanding is that you need to know about SharePoint Scalability.
    For your issue, please have a look at the blog:
    http://technet.microsoft.com/en-us/library/cc262787(v=office.15).aspx
    https://www.linkedin.com/today/post/article/20140610232851-17468776-scalability-planning-in-your-sharepoint-2013-office-365-roadmap
    http://www.slideshare.net/garthluke/effective-sharepoint-scalability-management-to-blob-or-not-to-blob-thats-the-question
    http://download.microsoft.com/download/7/F/0/7F069D0B-B6BD-4692-868B-E8555BB72445/LargeScaleDocRepositoryCapacityPlanningDoc.docx
    Best Regards,
    Eric
    Eric Tao
    TechNet Community Support

Maybe you are looking for