What can I to run the system only with DAC card +accessori​es + lookout software

That configuration for speed up and simplifing of system.

Are you asking about NI's DAQ hardware and Lookout? The only way Lookout talks to DAQ hardware is via OPC. So, you'll have to use the DAQOPCServer for this. The speeds will obviously not be the same as when using DAQ VIs directly.
Hope this helps. Please provide more details if you have any more questions in this regard.
Khalid

Similar Messages

  • What can i do for the -3degree problem with motion sensor?

    Compare with my Iphone 5 ...There is a big problem and confuse me !
    What can i do to solve this problem?

    Apple, I'm sure, is working on it. If it's easy to fix with software, it will be out shortly with software update 7.0.3. Just sit tight.
    If it's a hardware problem, it's unlikely Apple will be able to fix it, and they're equally unlikely to take back millions of phones. My guess is we'll get a free case out of it -- just like with "Antenna Gate".
    My data:
    My iPhone 4 running iOS 7.0.2 agrees with reality (defined by both my bubble and digital contractor levels).
    My 32GB silver iPhone 5s is off by 3 degrees (level function) and about 7 degrees (compass function). I haven't run into any buildings with Tom Tom yet.

  • I am about to buy a new computer and I noticed that the system comes with Windows8. I have Photoshop CS6 for windows 7. My question is can this be loaded onto the new windows 8 and if so what steps do i have to take?. Are there any things to avoid?

    I am about to buy a new computer and have noticed that the system comes with Windows 8. I have Photoshop CS6 for windows 7.
    I would like to know if this can be loaded on the new system? and what steps I need to take to ensure it functions correctly.

    Windows 8 meets Photoshop CS6 system requirements, see the link below
    System requirements | Photoshop

  • I am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

    i am trying to set up iTunes match on my apple tv, but it just keeps showing that it is loading, it has been running for over an hour, what can be done here, it has gone with no problem on my iPhone, iPad but not the tv

    Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.

  • Hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!

    hello everyone...I got my very first macbook pro just today and i have a problem deleting the "test" user account. if i can't delete it, the system won't let me turn off the system. I don't know what to do! HELP!!!!

    Have you created another admin user? Go to system preferences click users and click the + to add a user; if you haven't already. Once you have another admin user other then the "test" user make sure you're signed out of the test user account. Sign in with the alternate ADMIN USER that you just created or had created already and go back to SYSTEM PREFERENCES and click the same USERS icon near the bottom. Now select the TEST user and click the - sign. This should prompt you if your sure you want to delete the user account. And your done.
    New User created and Test User deleted... I hope this helps.

  • I've clicked 'forget about this site', can I undo this by running the 'system restore' feature to recover my history?

    I accidentally clicked 'forget about this site' and I'm looking for a way to undo this. I've heard there is no way to recover the history from a particular site once it has been deleted, but surely it leaves some kind of record in the system? I read an article that suggested running the 'system restore' feature which gives me the option of 'restoring my computer to an earlier time' before certain changes were made. Would this work?

    no, updating the browser won't have an impact on your history - all your personal data will remain.
    a general tip if you want to avoid data loss/highly depend on this data, is to back-up your firefox profile regularly: [[Back up and restore information in Firefox profiles]]

  • What can I do against the Identity Check from Entourage

    What can I do against the Identity Check from Entourage???

    Looks like you may have stumped the members. Can you explain in more detail? I've used Entourage for as long as it's been out and don't remember encountering an "Identity check" issue.
    What version of Entourage? X, 2004, 2008, 2011?
    Also --please modify your equipment line to correct your OS version. "iOS" is not a Mac computer operating system. It only runs of iPods, iPads and iPhones, not real computers. Do About this Mac from your Apple menu; that will show your OS version.

  • Error Message: "Skype can not start because the system is not available"

    Try to reset all Skype settings. Quit Skype or use Windows Task Manager to kill any Skype.exe process. Go to Windows Start and in the Search/Run box type %appdata% and then press Enter or click the OK button. The Windows File Explorer will pop up. There locate a folder named “Skype”. Rename this folder to something different, e.g. Skype_old. Next go to Windows Start and in the Search/Run box type %temp%\skype and then press Enter or click the OK button. Delete the DbTemp folder. Restart Skype. N.B. If needed, you will still be able to re-establish your call and chat history. All data is still saved in the Skype_old folder. 

    Okay!
    I'm newbie here, but it doesn't matter. I dont want to do here anything else, just write off my opinion about the Microsoft's "new" Skype, and I hope they will read...
    This is a cropped image - of course hungarian, because I'm hungarian, but I think many of us could see this as well. How this is possible? "The Skype can not start because the system is not available" *** What kind of system? The Skype was on a P2P system, where is impossible that the system is not available! This is why the skype was much better than the Microsoft's messenger. Then they bought it, and make it wrong...
    I found a solution for this problem, this can happen if my client is not updated. But IT IS!
    How does it works? Can we use the **bleep** Skype how we would like to use? Or this time we need to find an other application (like Viber), and using that while they not buying that as well, just because that is better?
    Edited to conform with the Community Guidelines
    Subject/title edited to better reflect post content.

  • I can not re-start the system

    Hello,
    Please help,
    I can not re-start the system after modified the access to all the programs by users in the same mac
    Right now, I can not start the system, no matter what user....
    The screen is black....:(

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Milestone billing, the system only allows pricing types D, G and K

    Hi,
    I would like to use pricing type as C Copy manual pricing elements and redetermine the others for Mile stone billing item catagory.(VTFA copy control setup)
    While changing pricing type from G to C in copy control VTFA - ITEM LEVEL, i am getting this beow warning message.
    Milestone billing, the system only allows pricing types D, G and K
    Could you tell what is impact of this warning message?
    Best Regards,
    Chandramohan

    Read OSS Note 102961 - New pricing type for milestone billing plans.
    It looks it used to be error message, until version 4.5A.
    This is just to make sure that the cost conditions are adjusted to the billing percentage rate. By keeping value K you can achieve this.
    Regards,

  • QM error "The user profile service service failed the logon. No more threads can be created in the system."

    Hi,
    I've a client running QM 8.x. QM is working and all recordings are present, it's just that when logging into the server, following error mesasge is displayed:
    The user profile service service failed the logon.
    No more threads can be created  in the system.
    Any suggestions on this issue will be greatly appreciated.
    thanks,
    Kapil

    Hi,
    Thanks for your post.
    Please check event viewer if there are some error logs?
    Meanwhile, there is a similar thread has been discussed:
    Receiving error about "no more threads"
    http://social.technet.microsoft.com/Forums/windowsserver/en-US/9a9e22e4-d947-4d19-b06c-aaadda624dbc/receiving-error-about-no-more-threads?forum=winservergen
    Regards.
    Vivian Wang

  • My MacBook Air can't get past the gray screen with the apple logo. What's the fix?

    My MacBook Air can't get past the gray screen with the Apple logo, so I can't login. Does anyone know the fix for this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, reboot as usual (i.e., not in safe mode.) If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • I can't get into the system osx lion

    I can't get into the system of my iMac osx lion

    I would recommend that you try rebooting while holding down the Command - R keys to get  into the Recovery Partition.  There, run Disk Repair and then run Repair Permissions twice.  A sizeable number of people have found that these steps solved the same problems that you are having.  If that doesn't completely resolve it the the next step is to reset the PRAM, by rebooting while holding down the Command-Option-P-R keys.  This may also be the problem solver you need.
    Hope this helps

  • What can I expect in the way of reception if my base station is in the house and the computer is in another building (2 exterior walls, 30-40 ft distance)??

    What can I expect in the way of reception if my base station is in the house and the computer is in another building (2 exterior walls, 30-40 ft distance)??

    Depends on things like the building structure and overall building makeup inside and between these walls. It will probably be fine, but there is only one way to find out for certain.

  • What do you do when the system crashes ?

    hi experts,
    i want answers for the following questions..
    1.What do you do when the system crashes in the middle of a BDC batch
    session?
    2.What do you do with errors in BDC batch sessions? and how to proceed further..
    with regards ,
    James...
    valuable answers will be rewarded...

    HI,
    There are two ways to tackle this issue.
    <b>Method..1</b>
    Thru se16 check the table(s) being updated, preferably the last table as per your code. If you have say 1600 records in the flat file check for the upload of the 1600 th record.. If not ok, check for the upload of the 800 th record(N-N/2), if OK go & check
    N+(N/2) th record  if not ok goto N-(N/2) th record where N is the curent record number in the flat file . In about 4 or five checks you will converge on the last uploaded record.
    Now from the flat file, remove the lines till the upload is ok & then re-run BDC.
    Even here a record may be uploaded partially which has to be manually edited thru se16.
    <b>Method..2</b>
    Have a zee table for uploads. Just after uploading a record into the sap table, fill this zeetable with few fields of each the records. In an abort situation this table will tell the story of the update status. Take care to empty this table occasionally.
    Regards
    Gaurav

Maybe you are looking for

  • Back to my Mac - Use with a NAS?

    The basics - Does Back to my mac support a NAS, specifically a Synology NAS? I own almost every possible Apple device that can be owned, except the Power PC (Slurps!!). Prior to this, it has been a pain to set up my Synology NAS for use on a variety

  • Moving iTunes Library to external hard drive when iTunes can't consolidate.

    Hi guys, hope you can help. I want to move my whole iTunes library to an external hard drive and then delete it all from my laptop, and from reading around I realise I have to consolidate the library into the iTunes music folder. However, as my inter

  • Approval Preview (Only first approver is displayed after 1 approval step)

    Hello Everyone! We have a scenario in PROD wherein the approval preview doesn't show all approvers in the screen. At first, when the Contract document is prepared (not yet approved/created) and then the approval preview is displayed, the screen corre

  • ITunes Crashes when trying to backup on DVDs

    I always backup my itunes library both on hard drive and on DVDs and never had any issues in the past. However, since I downloaded the latest version of itunes, the program always crashes when it's time to copy to a DVD. Any suggestions ? Thanks !

  • Redemption Code problem  [branched from unrelated serial number posting]

    I'm also having a similar problem not being able to redeem my redemption code for a prepaid card on the website and hence not being able to obtain a serial number. The trial version was working fine prior to me uninstalling to install the perpetual v