What can I expect in the way of reception if my base station is in the house and the computer is in another building (2 exterior walls, 30-40 ft distance)??

What can I expect in the way of reception if my base station is in the house and the computer is in another building (2 exterior walls, 30-40 ft distance)??

Depends on things like the building structure and overall building makeup inside and between these walls. It will probably be fine, but there is only one way to find out for certain.

Similar Messages

  • Trying to set up Directv GenieGO using Airport Extreme.  Getting error message: DHCP range entered conflicts with the WAN IP Address of your base station.  How do I resolve the conflict.

    Trying to configure an Airport Extreme manually.  After I enter the IP Address of the GenieGo along with the rest of information required I am getting the following error message when I click update:
    DHCP range entered conflicts with the WAN IP address of your base station. 
    How do I resolve the conflict? 

    You cannot use the same range on LAN and WAN if you are routing.. it must be different.. and you should not be routing at all.
    The AE should be in bridge mode. NO DHCP settings at all.

  • What can I do when saw this? "No configured AirPort base stations have been found"

    What can I do when I saw this? "No configured AirPort base stations have been found"
    My Time Machine is not working. And is not connected to my computer.

    Did you update the firmware.. this seems to happen a lot.
    Do a full factory reset and start over.. this is easier with it pulled from the network.. plugged into a computer by ethernet.. then do the reset and when you finish put it back in the network again.

  • What is Error 2813 while trying to install  my Airport Extreme Base Station? and How can I fix it? Thanks

    What is Error 2813 while trying to install  my Airport Extreme Base Station(A1143/MA073LL/A)? and How can I fix it? Thanks

    Did you remember to completely power cycle the entire network?
    You would want to do this after any update or change to the network.
    If you did not do this yet......things are out of sequence.
    Power off everything on the network.....all devices.....power down order is not important
    Wait a few minutes
    Start the modem first and let it run a minute or two by itself
    Start the next device connected to the modem the same way
    Work your way out on the network starting each device about a minute apart
    Check the network

  • What can I expect of my 4s with wifi  connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

    What can I expect of my 4s with wifi  connectivity. My 4s receive a signal from the same router I have always used. My 3G would pick up a signal throughout the house, and my 4s won't allow me out of the room. Is my new phone defective or just inferior.

    4S at my house have stronger antenna than 3G iPhone. Reset Network Settings, tap Settings App>General>Reset, near bottom>Reset Network Settings. If still problem take to Apple for Warranty Coverage.

  • X3-02 what can we expect??

    hello.
    when is an update comming for x3-02 and what can we expect?
    how long will this phone be supported?
    are there new features comming? what features?

    You are asking in the wrong place if you are wanting a reply from nokia. It's mostly other users that provide the help here and it's not an official contact point for nokia.
    If you want to talk to nokia about this try contacting them using the "contact us" link, via twitter or via facebook.

  • Replace a MOBO-What Can I expect?

    Hello-
    I have a 2.5 yr old GNB-MAX and the IDE controller seems to have gone bad; my DVD and CD drives don't spin up correctly; this happened before and I swapped MOBO and the problem was fixed, with the faulty MOBO being repaired by MSI.  Fortunately, I have a spare MOBO of the same model, which greatly helps (smartest thing I ever did was purchase a backup on EBAY for $40).
    Since I don't do this often, I can't remember exactly how the system will respond with the new MOBO.  When I swap my MOBO, what can I expect?  I presume I will not need to reinstall WIN-XP, but I will have to reactivate it, right?   What other nuances will I encounter?
    Thanks.
    Scott

    I think no .. unless the mobo "touch wood" had problems... maily ... all not much difference .. unless is the BIOS different ver .. etc .... should be no problem =)

  • The last few days I have been constantly saving my file. About an hour ago I opened my file and the most recent work wasn't saved even though I'm sure I saved it before closing. What can I do? Also, when I have tried to email it to myself as a backup, the

    The last few days I have been constantly saving my file. A couple of hours ago I renamed the file and then reopened my file a little while later, but the most recent work wasn't saved even though I'm sure I saved it before closing. What can I do? Also, when I have tried to email it to myself as a backup, the fields aren't populated when I open it up. Fyi, I have the free subscription.

    Hi Constance,
    As i understand your changes in the pdf were not saved...Are you still facing this issue?
    Regards,
    Rahul

  • My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?

    My Droid 2 has been malfunctioning lately making the phone completely uncontrollable. I have done a hard factory reset and the problem still persists. What else can i try?

        We want you to enjoy the best reliability with your Droid 2 Jaxie! What specific problems are you having with the device? Is your software up to date? The latest version available is: 4.5.621.A955.Verizon.en.US. If the software is up to date, we recommend running the device in safe mode to determine if third party apps may be causing the issues. I hope this information is helpful.
    http://bit.ly/IPw5jE
    http://bit.ly/o5McAQ
    Sincerely,
    JonathanK_VZW
    VZW Support
    Follow Us on Twitter@VZWSupport

  • Creating that blur using my brush my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area

    Creating that blur using my brush. When I paint the area, which highlights in red, I bring the clarity down to create more of that blur but what ends up happening is that my entire image changes too and becomes blurry. Not only that but the area I painted also becomes over exposed. What can I do am I missing something here all I want is to blur a section and not change the rest of the area I am painted by automatically becoming over exposed. Does anyone else have this problem that can help me?

    Quote
    Do you think I should try to find a cheap mobo to OC my current CPU?  How about trying to find one (mobo) used?  I fear that my only realistic choice will be to scrap the CPU and eventually buy a new mobo and CPU, but as the CPU was only released just under two years ago I would value being over to overclock it with a cheap enough mobo to last me another year or so.
    Who knows what additional problems may be run into by switching mainboards & such. The OS would have to be reinstalled fresh, etc. Money wise, it wouldn't make a lot of sense to invest more into a system that is rather outdated. The small performance gain making the switch to another board using the CPU you have, just doesn't really make much sense, especially if what you have now is completing the tasks asked of it. Save up some money, set it aside for a future build. There are plenty of new platforms in the works.

  • I have too much music for one ipod.  What's the easiest way to sync half of my library on to one ipod and the other half to another?

    I have too much music for one ipod.  What's the easiest way to sync half of you library on to one ipod and the other half on to another?

    Make playlists and choose whatever playlists you want to sync

  • Is the on/off button bad function a hardware problem? What can I do if a mobile company don't fix this? Besides, my phone still have the apple warranty

    Hello everyone, I bought an iPhone 5 six months ago from a mobile company. now the on/off button is not working properly. I send it to this company technical service support and they didn’t fix it saying that the button problems are not covered by the warranty; moreover they say that warranty just covers software and hardware problems. First, is the on/off button bad function a hardware problem? What can I do if a mobile company don’t fix this? Besides, my phone still have the apple warranty

    Customer Service: Contacting Apple for support and service - this includes international calling numbers.
    Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
    To contact product and tech support: Apple - Support - Contact Apple Support.

  • I have a Ipad4  and now it shows a big screem and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do? Is it a hardware problem?

    I have an Ipad4  and now it shows a big sceem  and I can't use it any more. I did a lot of things like full restore and the Ipad keeps not work well. What can I do?          Is it a hardware problem?
    Look the 2 images on link below:
    https://www.dropbox.com/sh/0arufrxzjwwmweu/6Fxz1Ljbmd

    Try Settings > General > Accessibility > Zoom: OFF
    Note: You may need to use 3 fingers to tap and scroll.

  • Can apple determine the location of my stolen iphone when iy was powered back on and the remote data erase was initiated?

    Can apple determine the location of my stolen iphone when it was powered back on and the remote data erase was initiated?

    What To Do If Your iDevice or Computer Is Lost Or Stolen
    If your Mac, iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should do in advance - before you lose it or it's stolen - and some things to do after the fact. Here are some suggestions:
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T, Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. Lost or Stolen iPhone? Here’s What to do
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on MobileMe
      3. OS X Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)
    Third-party solutions for computers:
      1. VUWER 1.5.4
      2. Sneaky ******* 0.2.0
      3. Undercover 4.7
      4. LoJack for Laptops Premium Mac
      5. STEM 2.1
      6. MacPhoneHome 3.5

  • What can I do I got my iPad fixed at a different brand place but not apple and I have ended up a few weeks later with dust inside my screen is their anything apple can still do for me?

    What can I do I got my iPad fixed at a different brand place but not apple and I have ended up a few weeks later with dust inside my screen is their anything apple can still do for me?

    If another person or company serviced your iPad, your warranty has been voided.  Apple will do an out-of-warranty exchange.  Have you contacted the original service provider, and complained?

Maybe you are looking for