What changed with the mousemove event, doesn'y work w/FF7

The code below was broken by the FF7 update. When you click on the image moving the mouse should scan across the enlarged image. Problem happens with Windows 7 as well.

I have tried this on my own computer. It do not know about older versions but it seems to work in Firefox 7 when you use the same code for xPos and yPos in Firefox as in IE. I get some kind of magnifier effect. 
 
if (navigator.appName.indexOf("Microsoft") > -1) 
{ 
ev=event; 
} 
xPos=(ev.clientX+document.body.scrollLeft-targetLeft)/PhotoSm.width; 
yPos=(ev.clientY+document.body.scrollTop-targetTop)/PhotoSm.height;

Similar Messages

After installing FF4 scrolling up and down with the touch-pad doesn't work on my Acer Aspire anymore.

Neither does it work to browse forwards or backwards with the double gesture. Zooming in and out works fine though.
Everything still works in IE8 and in Google Chrome.
The touch-pad uses an ALPS-driver.

Thanks, I don't have the file tp4table.dat on my computer. Currently I've reversed to 3.6 and will run it as long as it works. Really don't like 4.0 anyway... May be forced to use IE again if I don´t find anything better. Tried Chrome and worked well at first but now back and forth doesn't work there either and that's so annoying.

When you will release a new java update ? With the last it doesn't work correctly ( java 3d )

I use java 3d, but with the last update it doesn't works with any browser

"When you will release a new java update ?"
"We" don't release anything; we're not Apple, we're just users like you.
Use the feedback form to send queries to Apple.
http://www.apple.com/feedback/macosx.html

HT1430 What happens if the home button doesn't work?!

Stuck in recovery Mode and my home button doesnt work.
am i doomed?

Comes up with the message;
itunes has detected an iphone which is still in recovery mode. you need to restore.......
then when i restore it comes back to that message

Problem with the screen (touchscreen doesn´t work)

A friend gave me his iPhone to check it because when you try to unlock it it tell you to slide but nothing happens it touch it but is like if the iPhone dont recognize that you are touching it
Please Help
(touchscreen doesn´t work)
Message was edited by: Dylanss

I've never seen Apple say that unlocking voids the hardware warranty.
Nor have I seen Apple say that unlocking violates the software agreement, since unlocking in the USA is very likely to be exempt from doing so.
I'm trying to locate a link to Apple's statement, but it should be crystal clear to any well educated person that the following came from an Apple statement.
This article is dated 9/25/07.
http://www.infoworld.com/article/07/09/25/iPhone-hacks-void-warranty_1.html
+Less than a week after CEO Steve Jobs said that Apple would fight hacks that unlocked the iPhone, *the company said _any modification, unlocks included_, voids the phone's warranty.* Saying it had found that many of the unlocking programs "cause irreparable damage to the iPhone's software," Apple spelled out the policy. *"Users who make unauthorized modifications to the software on their iPhone violate their iPhone software license agreement and void their warranty,"* the company said in a statement. "The permanent inability to use an iPhone due to installing software is not covered under the iPhone's warranty."+

The connection with the Philips picopix doesn't work

i have connect it with a hdmi transmitter. The computer notice the connection, but the screen will not show.
How can i solve this

Hi Geer1968,
I've got similar problems. I recently bought a Phillips PicoPix 3410 and I'm unable to get any images from my Mac sources.
I tried to connect it to my MacBook Pro via an HDMI adapter and the HDMI-MiniHDMI cable of the box --> no result, the Mac screen flickers but no screen was detected nor an image sent to the beamer.
I bought then the PicoPix iPhone cable and tried to connect my iPad 2 (and with the adapter), my iPhone 5 to the beamer and still no result.
I tried to connect my MacBook Pro to an external Screen via vga. This works fine. But before bying another, may be useless, cable from Phillips, I would like to know if you've managed to solve this problem and how you did it.
I installed Yossemite on my Mac and still no luck with the beamer connection.
Best regards.

When I type in web searches, Firefox remembers them with a system similar to predictive text. How can I erase the search history list, because deleting the history with the organise tool doesn't work. Please help.

When I type in searches I don't want a box to appear under the search box trying to predict what I'm going to type next. Can I disable the system(prediction box) or erase the history list or both?

Thanks for the suggestion, but no effect, when I right click on the search bar all I get is; select all (which does nothing), add keyword to this search (which is the opposite of what I want) and add dictionary (again adding something). Do you have any other ideas? :)

HT1212 What happens when the touch screen doesn't work?

I have an iPod that was dropped in water sometime ago and we dryed it out immediately with rice.
I had lost all hope for it for a while, but then I noticed that it was still working and had the same homescreen on it.
I decided to try it again and when I plugged it into my computer it said something about reactivating it on the internet somehow.
When I did plug it into the computer it said I needed to put in the 4-digit passcode, but the screen isn't working.
I figured it was because of the water damage, but I just wanted to make sure I wasn't doing doing something wrong.

Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

After update to ioS 7.0.3, Airplay function for playing music with the Home amplifier doesn't work anymore.

I used to listen to Ipad music on my home video using Airplay function.
After updating to iOS 7.0.3, the Airplay icon is no more available for choosing local/remote reading.
Does anybody has an idea?

So everytime they update there OS I should go and re-read the entire manual, I'm not the only one who had this problem, why was is so hard to find an answer from Apple, why didn't they just say read the manaul, all I got was bunch of links saying to make sure your wi-fi is setup correctly, reset yout ipad, they didn't answer the question....

I tried copying a photo and pasting it in another event/group within iPhoto but the paste feature doesn't work. This wasn't an issue with both Leopard and Snow Leopard. Do you have any solutions or tips?

I bought a new MacBook Pro with OsX Lion as operating system. I use iPhoto a lot and when I tried copying a photo then pasting it to another event/group, the 'paste' feature doesn't work. This wasn't the case with Leopard and Snow Leopard where the 'paste' feature worked. What I did was to paste the photo first to the desktop before transferring it to the new event/group. I brought my Mac to the Apple store where I bought it and the technicians were themselves surprised that the 'paste' feature didn't work. Chalked it up to glitches in the Lion os. So how do we fix this? I just find it absurd that a feature that used to work in Snow Leopard has been disabled in Lion, and the user still has to undergo an additional step to make it work, when new technology is supposed to make things easier for users.
Also, hasn't anyone noticed that it takes longer for the computer to boot upon opening?

Instead of copy and paste drag the photo to the new event. Or flag it and use the add flagged photos to selected event command
LN

HT4259 I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets block somehow when the Express looks like it's set up and 'green' - no in

I have been trying for hours to extend my Extreme Gen 5 network with an Express Gen 2. But no matter what I do or try, it doesn't work. What does happen is my internet gets blocked somehow when the Express is online and looks like it's set up perfect and 'green' - but no internet connection for anything even though the Extreme is green and the modem is good. Once I disconnect the Express, everything is good again.
I've tried LAN, WAN, though a switch, direct connect, Extreme set to Extend the network, the Express set to be an extension. Most of the time I get an error trying to update the Express. But when it seems to be set up perfect, the entire house can't get to the internet. Just when it looks right, it is so wrong.
If anyone can give me exact steps (e.g., "...from the Base Station menu, select the Restore Default Setting option" vice "...just restore the defaults..."), I would greatly appreciate it. I'm left to the conclusion that the Express is faulty. I've been using Airport Utility 6.2 from Mountain Lion on one computer and Airport Utility 5.6.1 from Snow Leopard on another computer (the latter give more control while the former just want you to 'forget' the Express).

I finally got it working. I was trying to set it up ethernet. My biggest mistake was when the new Express came on, I did not select 'Continue' - I went straight to manual thinking that I would get the most setup options in manual mode. So everything I initially tried always resulted in 'wireless'. Even when I would update or restore default settings, the Express would not completely restart. Or sometimes I would get an error. So most of the time I had to unplug it. So when it came back up, none of my changes were retained. But there were a lot of times when everything was green and appeared to be fine. But anytime the ethernet cable was plugged in, no more internet.
So here's the weird part. When I finally tried 'continue' (vice manual), I would get 4 options. One would be 'ethernet' extended. So I would select it, it gave me green lights, all looked good, and still the same problem. This is when I got frustrated. I thought I had exhausted all possible combinations.
But somehow when trying continue again after another restore, I only got 3 options. One was the same ethernet extended option (can't remember what the missing 4th one was). And this time it worked - it gave me the big green circle with the checkmark saying it was successful. I don't know what I did different, but I know now that it won't work if 4 options come up to choose from. It will work if only 3 options come up. And success if only verified by the big checkmark. Had anyone anywhere said the checkmark declaring success is validation, then maybe I wouldn't have gone down so many rabbit holes thinking it should have been successful.
As for which Airport Utility I prefer, 6.2 looks nice, but it would just ignore the Express and would want me to 'forget' it and would not let me edit it. Airport Utility 5.6.1 was the one that I ended up using the most and finally had success with. It still strikes me as odd that there is no manually way to pick ethernet, it can only be choosen following a 'restore defaults', and only from the 3-option list (the 4-option list had the same ethernet choice, but it no worky).
Thanks for the response. I really do appreciate it.
Aiport Extreme Gen5 - internet access and router
Airport Express Gen2 - connected via ethernet, extending my wireless
- configured while connect directly to the Extreme, but now on a switch (16-port hub)
Using Airport 5.6.1
1) Restore Defaults from Base Station menu
2) Following restart, Select Continue
3) Of the 3 option presented, select 'ethernet.... extend network...'
- if 4 options are present, may not work
4) Wait for the green circle with the big white checkmark.
5) Connected Express to the switch where a cable went to other end of house - works.
Dead-zone went from 2mbps to 24mbps.
I probably spent 4 hours chasing my tail in anger. The correct way took about 5 minutes total.
Thanks again.

Capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

In Pages capitalization doesn't work as described. One can start with lower case and change to upper, but changing from upper case to any of the other options doesn't work. Is there a way around this or is this just a glitch that needs fixing?

I think it does work as described, but the description is not very complete. Capitalization does not change any of the characters that you type; what it does is allow some of the lower case characters to display as capitals. If you copy the result and paste it as plain text, you'll see that the lower case characters are still there. It doesn't actually say anywhere that it can make capitals display as lower case, and it can't.
The obvious way around this is to actually type what you want.
The more powerful way is to install WordService from Devon Technologies which adds the functionality of Pages' capitalization menu as well a lot of other ones. WordService actually changes the character to the one displayed, and it works in most of the applications on your Mac.

My macbook Pro 13'' keys aren't working (The Esc, F1 to F12 and also the Eject Key doesn't work and so I'm unable to change the varied special features those keys offer.) Please help what do i do? Because i've gone through all the support options :(

My macbook Pro 13'' is giving me trouble
The Esc, F1 to F12 and also the Eject Key doesn't work and so I'm unable to change the varied special features those keys offer.
Please help what do i do?
Bceause i've gone through all the support options

Hi Kash_xo,
If you are having an issue with some of the keys on your MacBook Pro's internal keyboard not functioning as expected, I would suggest that you troubleshoot using the steps in this article -
OS X Mavericks: If keys on your keyboard don’t work
Thanks for using Apple Support Communities.
Sincerely,
Brett L

HT1296 When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

When I sync my iphone with Windows 7, the contact moves to my computer, but the contact is not complete. No phone numbers. What am I doing wrong? I have also tried sync-ing with Yahoo, and that doesn't work either.

The music sync is one way - computer to iphone. The only exception is itunes purchases. File>Transfer Purchases
It has always been very basic to always maintain a backup copy of your computer for just such an occasion. Use your backup copy to move everything to your new computer.

What's with the new Firefox 8.0? I made the mistake of updating mine and about 30% of the icons in bookmarks disappeared. It looks like you are requiring a favicon. Anyway, BAD IDEA!!!!!

What's with the new Firefox 8.0? I made the mistake of updating mine and about 30% of the icons in bookmarks disappeared. It looks like you are requiring a favicon. Anyway, BAD IDEA!!!!!

Briansyddal - you might be able to manage your phone without a PC, but many of us can't, especially those of us with large iTunes libraries. How do you propose I manage my 250GB of music using only a phone? Maybe I could go out and buy 10 iPhones and spread my library out among them!
Catz537 - I have the same problem as you and I've spent hours on the web trying to find a solution to it. It was a problem with iOS 7 and 8.1.1 doesn't fix it. The the only advice from Apple is completely useless because it requires you, effectively, to delete and recreate your iTunes library and lose all your metadata, album art, notes etc and there's also no guarantee it will work. I wish I could be more help (even more - I wish Apple could be more help) - I updated to 8.1.1 at 1400 today. At 2200 I'm still "waiting for changes to be applied" for a measly 16GB of music transfer.

What changed with the mousemove event, doesn'y work w/FF7

Similar Messages

Maybe you are looking for