What exactly Deflater.HUFFMAN_ONLY does?

Hi All,
I have this code which uses Java own library for Huffman encoding - ie Deflater.HUFFMAN_ONLY.
It compresses my input bytes very nicely. I have few questios with java strategy here ..
1 - Does the compression really only using Huffman? Or has it got something else in the background?
2 - Is there a way of getting at the huffman code table that Java creates in the background?This is to verify for me that yes I can use this class.
I have to implement a Huffman compression algorithm but if this does what I need, there is no point in me re-inveting the wheel. Afterall, I am unlikely to write as good a class as Java.
Thanks

AddisLig wrote:
1 - Does the compression really only using Huffman? Or has it got something else in the background?Check out the javadocs. The name certainly seems to promise that it's Huffman only.
2 - Is there a way of getting at the huffman code table that Java creates in the background?This is to verify for me that yes I can use this class.Check out the javadocs. Although I doubt there's access to the code table (unless you use trickery).
I have to implement a Huffman compression algorithmIf you have to implement it, then you can't use this.
but if this does what I need, there is no point in me re-inveting the wheel. Afterall, I am unlikely to write as good a class as Java. Agreed.

Similar Messages

  • What exactly is Safari doing?

    Let me start by saying that I like Safari. It's a great experience and does everything it needs to do well.
    Having said that...
    Safari HOGS memory on my MacBook Pro. When first launching Safari, it's not uncommon for it to be using 150+mb of RAM. Then I can just sit there and watch it climb on Activity Monitor. It usually tops out after about an hour around 700mb... with no window even open!
    To compare, FireFox takes up about 120mb at launch and climbs up to about 220-230mb after an hour. The Chrome beta uses about 50mb at startup and usually doesn't climb above 100. In fact, I've been running Chrome for about the past 10 hours and it's currently using 65mb of RAM.
    I've looked at how much memory Safari is taking up on other people's Macs and theirs don't seem to allocate near as much memory to Safari as mine. Any idea what the issue is? I have no add-ons, no skins, I've reset Safari, deleted all cache, etc etc etc...

    Did you ran lots of flash videos etc during that one hour? If so just quitting Safari and restarting it again would free up the memory.
    Chrome uses little memory because of the way it operates. Whenever you open a new tab/window in Chrome it actually launches a new helper process using about 50MB of memory each, so it's around the same as Safari and Firefox too.

  • Oraclesystemuser : What exactly this user does ?

    Hi Team ,
    I have a query regarding the user ” oraclesystemuser” Please let me know what is the purpose of this user .
    I have noticed the “oraclesystemuser” is created by default when we install SOA Suite and setup the domains . Its part of the group ” oraclesysetmgroup” . I would like to know the use of the this user . I am planning to change the password of the uset “oraclesystemuser” and would like to know what are the impacts related with this to the domains and what are the areas where we need to change the password . The current SOA Suite version is 11.1.1.3.0 and OS being used is redHat Enterprise Linux .Do let me know if you need anything else ?
    What we have observed is recently we made a password change for weblogic account and we see errors related with security in BAM manage servers logs .
    <Oct 11, 2011 7:38:06 AM MDT> <Notice> <Security> <BEA-090078> <User oraclesystemuser in security realm myrealm has had 10 invalid login attempts, locking account for 5 minutes.>
    From this scenario I would say "oraclesystemuser" is being used by BAM servers and not user what is the imapct on the domain if I chanege the password for " oraclesystemuser"
    thanks,
    Kiran

    Needs Help --
    If you don't know about Terminal, I would exit it, and don't open it again.  You could do incredible damage in there, if you're not knowledgeable.

  • What exactly Persistence Interface does in BI Beans ?

    Hi All,
    I would like to know the significance and usage of Persistence Interface into BI Beans.
    Any ideas or thoughts would be appreciable.
    Thankz n advance.
    Regards,
    Anwar

    .

  • What exactly does "Make AppleTalk Active" do?

    Hi,
    *System Preferences > Network > Ethernet > AppleTalk > Make AppleTalk Active*.
    I would like to know specifically/technically what exactly this option does?
    When connecting to OS X Macs, and Windows boxes publishing AppleTalk/AppleShare/AFP, there does not seem to be any need to have this option enabled.
    However, I am in an argument with a tech support guy at the moment, who is trying to claim that unless this option is enabled, connecting via AFP [1] is not true AFP...
    I know AppleTalk is a collection of protocols implemented in the 80s some time. And I know that AFP on Tiger is basically AppleShare over TCP/IP, and that AppleTalk over AppleTalk is not supported by Tiger.
    I suspect the Make AppleTalk Active option is somehow related to supporting AppleTalk sharing with old Mac systems, OS9,8,7 etc. But I really need to know exactly.
    Thanks.
    +[1] in this case, it is relating to sharing files between Tiger 10.4.10 systems and a Windows XP based RIP which is publishing some flavour of AppleShare.+

    Chris--
    My understanding is that AppleTalk is the protocol, like TCP/IP is a protocol. That's what this page implies to me:
    http://www.protocols.com/pbook/appletalk.htm
    So, at its inception, AppleTalk was a network transport protocol. There was a time when you could build an AppleTalk network without using TCP/IP, TCP/IP was only for the Internet (if you even knew what that was). You would just connect up some cables (not even ethernet, necessarily), and you'd get a network. It was pretty slow, but ethernet stuff was wicked expensive, so it didn't matter. AppleTalk handled the network transport, and AFP was a part of that.
    Sometime before OS 9 came out, Apple moved the AFP part to TCP/IP. AppleTalk was still available, mostly because of the legions of people who had old printers that only had AppleTalk (I know I was one of them until March of this year, when my LaserWriter Pro 600 gave up the ghost). If I had to guess I'd guess it's been almost ten years since they moved to AFP over TCP/IP. Certainly it was before OS 9.
    If you want to try connecting to the Windows Server via AppleTalk, you can try changing the URL in the dialog you get when you use the Finder's "Connect to Server..." menu item. I think, if I remember correctly, it takes this form:
    <pre class="command">afp://at/serveraddress:*/</pre>
    If that doesn't work, then take out one "/" after "afp:".
    charlie

  • HT4859 when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer?

    when you go to do this it say that your iPod or whichever device will no longer be backed up to the computer it is currently backed up to, what exactly does that mean? Will i not be able to sync my iPod from that computer? Please help me and answer either or both question detailed thanks

    Normally when you sync your device it is automatically backed up to your computer as the first step in the sync process.  When you choose to start backing up your device to iCloud, iTunes stops automatically backing it up on your computer when you sync.  That's what the message is telling your; that you are now backing up to iCloud and not to your computer each time you sync.  You can still manually back up to your computer any time you want by going to the Summary tab and clicking on Back Up Now under Manually Back Up and Restore.
    You can still sync your device as you did before, it just will no longer back up automatically when you do.

  • What exactly is Sand Box and what does it do?

    What exactly is Sand Box and what does it do? I think it works in the Security Mechanism of Java as a Byte Code Verifier (or atleast as a part of the Byte Code Verifier)..
    Your thoughts please..?

    What exactly is Sand Box and what does it do?It's a concept. It means that the executed code (of applets, Webstart apps) has restricted access rights to System resources. So if it tries anything evil, it won't be able to.

  • What, exactly, are 'encoded assets'? Why does removing them resolve problems? How can they be avoided in the first place?

    What, exactly, are 'encoded assets'? Why does removing them resolve problems? How can they be avoided in the first place?

    As I understand it, encoding fomats your digital video clips and photos (assets) into Standard DVD mp2 format so that it can be burned to a DVD.  If there has been an error in the encoding process, then you remove the old encoded assets and start over.  There are numberous reasons why there can be errors in the encoding process. 

  • What exactly does the AppleCare cover for MacBook Pro with Retina Display?

    I purchased the extended protection plan for my MacBook Pro with Retina Display 15" and my question is what exactly does it cover in what kind of situations (i.e. viruses, damaged ports, damaged charger, etc.)? I want to be able to take full advantage of the protection plan since it was a pretty big whole in my wallet.

    AppleCare covers all the problems you have with your MacBook Pro with Retina display and the peripherals which came with it (your charger) if you have a hardware problem that you didn't cause. For example, after 2 or 3 years and 1000 charges, OS X says that your battery has to be replaced: in this case, you have to pay for the battery, because batteries have got a lifetime, and Unibody Macs batteries have got an average lifetime of about 1000 charges.
    However, if the RAM gets damaged and you haven't done anything to cause it, you will get your computer repaired or replaced for free. AppleCare in a MacBook Pro with Retina display is very important, because near all the parts are soldered into the logic board and repairs are expensive

  • What is the exact way of doing BDC ?????

    I know when the input is minimal we have to use CALL TRANSACTION method in BDC and when we have batch of input files we have to use BDC Recording.
    My question is what is the exact way of doing BDC.
    Could any one please tell me the exact way of doing BDC Recording Process.
    I appreciate your help.
    Thanks for your Time.
    Shiv.

    Hello Sivaramu,
    Call transcation can handle only one Trasaction(Tcode).
    Session method can handle multiple transcations.  
    Before getting started with the Recording process...we have to know the transcation code. We do recording to record the screen number, screen values,  Button values(OK codes) ...etc
    For example...while recording we create a record using some t-code (Say MM01) ...Now, we will create a materail master record using the Recording process.
    Let us see the process of recoding a single record with MM01 using SHDB(A tool used to record the details of T-code)
    Go through these steps for recording by using SHDB.
    How to use recording :
    Go to SHDB
    --> Click on New Recording
    --> Provide any name in Recording , For ex: Z_CHAITU
    --> Provide the Transaction name as “MM01”
    --> Select the update mode as Synchrounous or Asynchrounus method
    --> Click on Start Recording button.
    --> It will display MM01 screen….type the appropriate
    information in it.
    --> Type the Material no as : 4567E (Any no, But there should b 1 Character in it)
    --> Type Checmical Industry in INDUSTRY SECTOR
    --> Type COUPONS in MATERIAL TYPE
    --> Now click on Select Views button.
    --> Select BASIC DATA 1
    --> Click on Ok button
    --> Under Basic data tab under Material, it will display the Material number.
    --> Type the short description and “Provide EA as Base Unit Of Measure”
    --> CLICK ON BACK AND IT WILL ASK U TO SAVE THE DATA, CLICK ON YES
    --> Again click on Back, it will ask if u wish to save the changes to record entries.
    -> Click on Yes
    --> Now, u will be in Initial screen
    --> Select the record and Click on Program button
    --> Now, provide any program name
    --> Now, select ‘Transfer from recording’
    --> Click on Tick mark
    --> Give some short description
    --> Type as Executable
    --> Click on Source Code button
    --> Automatically the code will appear in SE 38 program.
    U can try these steps with any T-code by knowing the Mandatory fields in it.
    ---> *Now by following all the above steps ur done with the recording process to create a single record in MAterail master (MM01).  Now, we use the same recording process and put this recording under Loop in report program.*
    So that, it will follow the same steps automatically to create materail master records from the flat file. If you have 10 records in flat file(Note pad) then it will do the same process for 10 times to upload 10 records from the flat file using the recoding process that we have done by using the SHDB
    If you want then i will provide you with the sample program to upload the data for MK01 using Call transcation and Session method.
    Call transcation method for MK01:
    U can try these steps with any T-code by knowing the Mandatory fields in it.
    & TITLE  : BDC FOR MK01
    *& DESCR  : UPLOAD THE DATA THROUGH FLAT FILE
    *& TRANSPORT : DOLK901203
    *& VERSION : V1
    *& DATE  :  17th , JAN , 2008
    report Z24_BDC_MK01
           no standard page heading line-size 255.
    *& DECLARATIONS OF STRUCTURE FOR MK01
    TYPES : BEGIN OF TY_MK01 ,
             KTOKK TYPE RF02K-KTOKK ,
             NAME1 TYPE LFA1-NAME1 ,
             SORTL TYPE LFA1-SORTL ,
             PSTLZ TYPE LFA1-PSTLZ ,
             LAND1 TYPE LFA1-LAND1 ,
             END OF TY_MK01 .
    *& DECLARATION OF INTERNAL TABLE
    DATA : T_MK01 TYPE STANDARD TABLE OF TY_MK01 INITIAL SIZE 0 ,
           T_BDCDATA TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 0 ,
           T_BDCMSGCOLL TYPE STANDARD TABLE OF BDCMSGCOLL INITIAL SIZE 0 ,
           T_ERROR TYPE STANDARD TABLE OF TY_MK01 INITIAL SIZE 0 ,
    *& DECLARATION OF WORK AREA
           W_MK01 TYPE TY_MK01 ,
           W_BDCDATA TYPE BDCDATA ,
           W_BDCMSGCOLL TYPE BDCMSGCOLL .
    *& DECLARATION OF SELECTION SCREEN
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME .
    PARAMETERS : P_FILE TYPE FILENAME .
    SELECTION-SCREEN END OF BLOCK B1 .
    *& DECLARATION OF START-OF-SELECTION
    START-OF-SELECTION .
    PERFORM SUB_UPLOAD_DATA .
    PERFORM SUB_POPULATE_BDC .
    PERFORM SUB_ERROR_REC .
    *include bdcrecx1.
    *&      Form  SUB_UPLOAD_DATA
          text
    form SUB_UPLOAD_DATA .
    DATA  : L_FILE TYPE STRING .
         L_FILE = P_FILE .
    CALL FUNCTION 'GUI_UPLOAD'
       EXPORTING
         filename                      = L_FILE
         HAS_FIELD_SEPARATOR           = 'X'
       tables
         data_tab                      = T_MK01 .
    endform.                    " SUB_UPLOAD_DATA
    *&      Form  SUB_POPULATE_BDC
          text
    form SUB_POPULATE_BDC .
    LOOP AT T_MK01 INTO W_MK01 .
    DATA : L_MSG TYPE STRING .
    REFRESH T_BDCDATA .
    perform bdc_dynpro      using 'SAPMF02K' '0107'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RF02K-KTOKK'
                                   W_MK01-KTOKK.
    perform bdc_dynpro      using 'SAPMF02K' '0110'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-LAND1'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFA1-NAME1'
                                   W_MK01-NAME1.
    perform bdc_field       using 'LFA1-SORTL'
                                   W_MK01-SORTL.
    perform bdc_field       using 'LFA1-PSTLZ'
                                   W_MK01-PSTLZ.
    perform bdc_field       using 'LFA1-LAND1'
                                   W_MK01-LAND1.
    perform bdc_dynpro      using 'SAPMF02K' '0120'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-LIFNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    CALL TRANSACTION 'MK01' USING T_BDCDATA MODE 'N' MESSAGES INTO T_BDCMSGCOLL .
    IF SY-SUBRC <> 0 .
    APPEND W_MK01 TO T_ERROR .
    ENDIF .
    CLEAR W_BDCMSGCOLL .
    READ TABLE T_BDCMSGCOLL INTO W_BDCMSGCOLL INDEX 1 .
    CLEAR L_MSG .
    CALL FUNCTION 'FORMAT_MESSAGE'
    EXPORTING
       ID              = W_BDCMSGCOLL-MSGID
       LANG            = SY-LANGU
       NO              = W_BDCMSGCOLL-MSGNR
       V1              = W_BDCMSGCOLL-MSGV1
       V2              = W_BDCMSGCOLL-MSGV2
       V3              = W_BDCMSGCOLL-MSGV3
       V4              = W_BDCMSGCOLL-MSGV4
    IMPORTING
       MSG             = L_MSG
    EXCEPTIONS
       NOT_FOUND       = 1
       OTHERS          = 2
    IF sy-subrc = 0.
    WRITE : / 'MESSAGE FOR ' , W_MK01-KTOKK ,'-------' , L_MSG .
    ENDIF.
    ENDLOOP .
    endform.                    " SUB_POPULATE_BDC
           Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR W_BDCDATA.
      W_BDCDATA-PROGRAM  = PROGRAM.
      W_BDCDATA-DYNPRO   = DYNPRO.
      W_BDCDATA-DYNBEGIN = 'X'.
      APPEND W_BDCDATA TO T_BDCDATA .
    ENDFORM.
           Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
        CLEAR W_BDCDATA.
        W_BDCDATA-FNAM = FNAM.
        W_BDCDATA-FVAL = FVAL.
        APPEND W_BDCDATA TO T_BDCDATA .
    ENDFORM.
    *&      Form  SUB_ERROR_REC
          text
    -->  p1        text
    <--  p2        text
    form SUB_ERROR_REC .
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        filename                        = 'C:/ERRORS OF MK01.TXT'
       WRITE_FIELD_SEPARATOR           = 'X'
      tables
        data_tab                        = T_ERROR .
    endform.                    " SUB_ERROR_REC
    Session Method for MK01:
    *& PURPOSE : This BDC report is used to upload all the vendor master
    *&           data in to SAP using SESSION METHOD with handling the errors
    report Y035_SESSION_METHOD
           no standard page heading line-size 255.
    *& Structure declaration
    *Structure Declaration for source internal table
    TYPES : BEGIN OF TY_UPLOAD,
              LIFNR TYPE RF02K-LIFNR,
              EKORG TYPE RF02K-EKORG,
              KTOKK TYPE RF02K-KTOKK,
              NAME1 TYPE LFA1-NAME1,
              SORTL TYPE LFA1-SORTL,
              LAND1 TYPE LFA1-LAND1,
              SPRAS TYPE LFA1-SPRAS,
              WAERS TYPE LFM1-WAERS,
            END OF TY_UPLOAD.
    *& Internal Table declaration
    *Internal Table Declaration for source table
    DATA : T_UPLOAD TYPE STANDARD TABLE OF TY_UPLOAD INITIAL SIZE 0,
    *Internal Table Declaration for bdcdata
           T_BDCDATA TYPE STANDARD TABLE OF BDCDATA INITIAL SIZE 0,
    *Internal table declaration for BDCMSGCOLL (To handle the errors)
           T_BDCMSG TYPE STANDARD TABLE OF BDCMSGCOLL,
    *Internal table declaration for reprocess the errors
           T_ERRORS TYPE STANDARD TABLE OF TY_UPLOAD INITIAL SIZE 0,
    *& Workarea declaration
    *Work area delaration for source table
           W_UPLOAD TYPE TY_UPLOAD,
    *Work area delaration for bdcdata
           W_BDCDATA TYPE BDCDATA,
    *Work area delaration for BDCMSGCOLL
           W_BDCMSG TYPE BDCMSGCOLL.
    *& Selection screen declaration
    *Selection Screen declaration
    SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME.
    PARAMETERS : P_FLNAME TYPE FILENAME.
    SELECTION-SCREEN END OF BLOCK B1.
    *& Start of selection declaration
    *Start of selection declaration
    START-OF-SELECTION.
    *Upload the data
    PERFORM SUB_UPLOAD_DATA.
    *Populate the BDC data
    PERFORM SUB_POPULATE_BDC.
    *Process the error records
    PERFORM SUB_ERROR_RECORD.
    *include bdcrecx1.
    *&      Form  SUB_UPLOAD_DATA
          This subroutine is used to upload the data
    FORM SUB_UPLOAD_DATA .
    DATA : L_FLNAME TYPE STRING.
    L_FLNAME = P_FLNAME.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        FILENAME                      = L_FLNAME
      FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      TABLES
        DATA_TAB                      = T_UPLOAD.
    ENDFORM.                    " SUB_UPLOAD_DATA
    *&      Form  SUB_POPULATE_BDC
          This subroutine is used to populate the BDC data
    FORM SUB_POPULATE_BDC .
    DATA : L_MSG TYPE STRING.
    *To oper a sesion in SE35
    CALL FUNCTION 'BDC_OPEN_GROUP'
    EXPORTING
       CLIENT                    = SY-MANDT
       GROUP                     = 'MAMA_SESSION'
       USER                      = SY-UNAME
       KEEP                      = 'X'
       HOLDDATE                 = '20080129'
       PROG                      = SY-CPROG.
    LOOP AT T_UPLOAD INTO W_UPLOAD.
    REFRESH T_BDCDATA.
    perform bdc_dynpro      using 'SAPMF02K'         '0107'.
    perform bdc_field       using 'BDC_CURSOR'       'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'       '/00'.
    perform bdc_field       using 'RF02K-LIFNR'      W_UPLOAD-LIFNR.
    perform bdc_field       using 'RF02K-EKORG'      W_UPLOAD-EKORG.
    perform bdc_field       using 'RF02K-KTOKK'      W_UPLOAD-KTOKK.
    perform bdc_dynpro      using 'SAPMF02K'         '0110'.
    perform bdc_field       using 'BDC_CURSOR'       'LFA1-SPRAS'.
    perform bdc_field       using 'BDC_OKCODE'       '/00'.
    perform bdc_field       using 'LFA1-NAME1'       W_UPLOAD-NAME1.
    perform bdc_field       using 'LFA1-SORTL'       W_UPLOAD-SORTL.
    perform bdc_field       using 'LFA1-LAND1'       W_UPLOAD-LAND1.
    perform bdc_field       using 'LFA1-SPRAS'       W_UPLOAD-SPRAS.
    perform bdc_dynpro      using 'SAPMF02K'         '0120'.
    perform bdc_field       using 'BDC_CURSOR'       'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'       '/00'.
    perform bdc_dynpro      using 'SAPMF02K'         '0310'.
    perform bdc_field       using 'BDC_CURSOR'       'LFM1-WAERS'.
    perform bdc_field       using 'BDC_OKCODE'       '/00'.
    perform bdc_field       using 'LFM1-WAERS'       W_UPLOAD-WAERS.
    perform bdc_dynpro      using 'SAPMF02K'         '0320'.
    perform bdc_field       using 'BDC_CURSOR'       'RF02K-LIFNR'.
    perform bdc_field       using 'BDC_OKCODE'       '=ENTR'.
    perform bdc_dynpro      using 'SAPLSPO1'         '0300'.
    perform bdc_field       using 'BDC_OKCODE'       '=YES'.
    *Transfer data to the session
    CALL FUNCTION 'BDC_INSERT'
    EXPORTING
       TCODE                  = 'MK01'
      TABLES
        dynprotab              = T_BDCDATA.
    ENDLOOP.
    *To close the session
    CALL FUNCTION 'BDC_CLOSE_GROUP'.
    ENDFORM.                    " SUB_POPULATE_BDC
           Start new screen                                              *
    FORM BDC_DYNPRO USING PROGRAM DYNPRO.
      CLEAR W_BDCDATA.
      W_BDCDATA-PROGRAM  = PROGRAM.
      W_BDCDATA-DYNPRO   = DYNPRO.
      W_BDCDATA-DYNBEGIN = 'X'.
      APPEND W_BDCDATA TO T_BDCDATA.
    ENDFORM.
           Insert field                                                  *
    FORM BDC_FIELD USING FNAM FVAL.
        CLEAR W_BDCDATA.
        W_BDCDATA-FNAM = FNAM.
        W_BDCDATA-FVAL = FVAL.
        APPEND W_BDCDATA TO T_BDCDATA.
    ENDFORM.
    *&      Form  SUB_ERROR_RECORD
         This subroutine is used to process the error records
             in to a file T_ERRORS
    FORM SUB_ERROR_RECORD .
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME                        = 'C:\MAMA_ERRORS.TXT'
       WRITE_FIELD_SEPARATOR           = 'X'
      TABLES
        DATA_TAB                        = T_ERRORS.
    ENDFORM.                    " SUB_ERROR_RECORD
    Hope the Explonation and information I had provided will resolve your issue.
    Reward points if information is very Helpful.
    Have a great day!
    Regards,
    Krishna Chaitanya
    Edited by: Krishna Chaitanya on Apr 7, 2008 4:59 AM

  • Reducing file size #1...what exactly does file, reduce file size do?

    Questions on reducing a pages to pdf file size…I will post each question seperatly.
    1) I was surprised to see page reduce file size take it from 50 megs to 20 megs…when I looked at a large jpeg file, its size went form 230k to 70k, but the entire image (not just the visible part after the mask) was there (I was hoping it would crop to the mask).
    I am curious, what exactly is reduce file size doing?
    Is it applying a quartz filter that I can control through colorsync (I think not)?
    Thanks, bob

    You will need to test the results, but I suspect it is definitely lowering the resoltion to either screen resolution (72dpi) or double (150dpi) and upping the compression of the .jpegs.
    In contrast to the Quartz filters, the results from file reduction in Pages is disappointing with a hefty loss of quality for not so much file reduction.
    I would work with known distiller settings in Acrobat Pro for a better result.
    Peter

  • What is UMA exactly? How does it work?

    What is UMA exactly? How does it work?
    I have T Mobile but am not subscribed to Hotspots at Home.  I do pay for the BB unlimited internet package.
    When I am connected to my router at home, it goes to UMA.  But other times, it just says wifi and is still connected to my router -- but NO UMA.  I haven't made any changes.
    What is this?

    Here is a KB that discusses UMA:
    http://www.blackberry.com/btsc/microsites/search.do?cmd=displayKC&docType=kc&externalId=KB11735&slic...
    Hope that helps!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • What exactly is a Carbon Copy Cloner and does it work on iMac Intel?

    A friend of mine recommended to me that carbon copy cloner is the best way to back up data including applications and that it is a freeware downloadable via their website. Can anyone explain to me (using layman's language) what exactly it is and give me a step by step procedure on what I have to do to make it work? Also, does it work on iMac Intel and if so, would I have to set anything differently??
    FYI, I do have a La Cie firewire drive.

    Did you check out their website? It really has a lot of info, but here it is in a nutshell.
    CCC is a cloning software tool. It will make an exact - and bootable - copy of every last bit and byte on your internal drive. You can then use that FireWire drive to boot up your Mac, or restore the data from it in case of an emergency, drive replacement or failure.
    It is not universal yet, but it does run through Rosetta.
    Download the program and there is a PDF file with all the step by step instructions, but it is really easy to use.
    BTW, LaCie has a program that is very similar called SilverKeeper.

  • My iPhone 4s was stolen this weekend and I did the Remote Lock.  What exactly does that do?  Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

    My iPhone 4s was stolen this weekend and I did the Remote Lock.  What exactly does that do?  Also, if i do the Remote Wipe will that erase all of my data and impede anyone from ever using the phone?

    The remote lock locks the iphone with a passcode that you set. By remote wiping the device it will simply restore it and clear it of all its data, but by doing this it will prevent you tracking it and communicating with it (e.g. remote locking it) in the future

  • What exactly is offline website data and what does it mean to clear it?

    What exactly is offline website data and what does it mean to clear it? For what purposes would I clear offline website data?

    http://forums.mozillazine.org/viewtopic.php?f=38&t=2485643
    Offline Website Data • MozillaZine Forums
    https://answers.yahoo.com/question/index?qid=20090501154657AAdwK5U
    Question about Offline Website Data.? | Yahoo Answers

Maybe you are looking for

  • Single quote in SPARQL query

    Hi, I have a SPARQL query with a clause like (?affy gb:bioprocess "3\'-phosphoadenosine" .). Oracle Jena adapter translates it into sdo_rdf_match('(?affy <gb#bioprocess> "3\'||chr(39)||'-phosphoadenosine")..., which throws the following error when ex

  • Non-cumulative infocube in Infoset: Inventory

    Hi Experts, I have a requirement to combine a infocube and DSO under Infoset. But the Infocube is non cumulative and is not allowing to add in infoset. Any solutions for this? My Infocube is customised and have 3 datasources: 2LIS_03_BF, 2LIS_03_BX a

  • What is best cloning utility for MacBook Pro

    I am about ready (finally as Mountain Lion's release approaches) to upgrade my mid-2009 17 inch MacBook Pro from Snow Leopard to Lion.  Only pieces remaining are a hard drive to clone my internal 750mb hard drive to and the Lion sw itself. I know the

  • After subscribing to iTunes match the music I had uploaded from my cd's is gone . How do I get it back?

    After subscribing to iTunes match the music I had uploaded from my cd's is gone . How do I get it back?

  • Standard ESS components missing!!!

    Hi Experts, I am working on ESS components in WD ABAP. But there is a problem the standard ESS componets for travel and expense which strats with prefix  FITE are missing in Sandbox system and production system. But these components are available in