What exactly does the iTunes iPhone 5S "back-up to computer" back-up?

I got a new iPhone that I want to restore from a back-up of my old iPhone. I was wondering exactly what things are "backed-up" with the iTunes back-up to the computer?
Does it back-up contacts, pictures, videos, game saved-data, app settings, and iPhone settings? Everything maybe?

Essentially everything other than media and the apps themselves. See Create and delete iPhone, iPad, and iPod touch backups in iTunes - Apple Support for details.
tt2

Similar Messages

What exactly does the Work Offline option do in a shared review hosted on an internal server?

Hi,
What exactly does the Work Offline option do in a shared review hosted on an internal server?
I *think* it simply disconnects you from the review server. I'm not sure why one would want to do this.
I'm trying to recommend an offline workflow for reviewers who may not be able to access a shared review hosted on our internal server (for example, while traveling). These reviewers would like to be able to comment on an offline version of the review PDF and then publish their comments when they can again connect to the Internet/internal server.
It doesn't seem like "Work Offline" is the right fit for this scenario. Instead, should reviewers save a local copy to their hard drive, comment on it, and then, when reconnected to the Internet, open the local copy, click Reconnect to Server, and then click Publish Comments?

Thanks, Dave. So for my hypothetical traveling reviewer, it would be reasonable to suggest the following steps for an offline workflow?
1. Connect to the shared review.
2. Choose Work Offline from the Server Status menu.
3. Close and save the review PDF locally.
4. Comment while traveling.
5. When back in the office, open the local copy of the review PDF.
6. Click Reconnect to Server.
7. Click Publish Comments.

What exactly does the M7 coprocessor do in the iPad air, and what apps can use it?

I've been trying a few 3rd party apps which use the m7 in the iPhone 5s. None of them work. Also there seem to be no apps both built in motion activity under the privacy menu in settings.
My question is, what exactly does the M7 coprocessor in the ipad air?

http://en.wikipedia.org/wiki/Apple_M7
http://www.imore.com/apple-m7
http://www.tuaw.com/2013/10/10/seven-apps-that-take-advantage-of-the-m7-motion-c oprocessor-in-t/

What exactly does the Radio Beacon Indicate

I have seen cases where the Radio Beacon is black and when it is gray. When it's black you may or may not be able to go through the wireless router to the modem and then to the internet. When it is gray, you cannot really do anything except be in a local mode. However there are instances when the Radio Beacon is black, rather than gray, and you still cannot access the internet. So, what exactly does the activated Radio Beacon Indicate, i.e., that the wireless network is working and the modem is down, or something else entirely ?

Assuming you're referring to the Airport icon in the menu bar, 'clear/empty' means Airport is turned off, gray bars means Airport is on but not connected to a network, and black bars means Airport is on and connected to a network. Other possible icon states are solid gray with a little computer inset, meaning you're connected to a computer-to-computer created on the Mac, and gray bars with an exclamation point (10.6 only), meaning connected to a network but not authenticated (e.g. wrong password for an 801.2X corporate/university network).
To your question, it's perfectly possible to be successfully connected to a network (black icon) and unable to access the internet. Situations like that would include the network requiring a proxy server, for which you haven't set up the details on in Network Preferences, or you're connected to an open network that requires you to enter information or agree to terms (e.g. a hotel network, where you need to put in your room number and agree to the charges before you can connect to the internet).

What exactly does the global switch command line do ?

Hello All
Just foraging in the dark world of APP-V. I have a question which I cannot find answer for through google.
There are powershell commands to publish an APP-V application globally. What exactly does the global switch do ?
I understand it makes the application available to everyone on the machine for anyone who logs onto that machine.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
Thanks

Correct, the global switch makes the application accessable for all users logging on to that system.
This feature is required for some packages, like Office. But it is ofter used for applications used by everyone, like Adobe Reader.
However in the absence of this global switch the application is still available to all users who logon to that particular machine. So what exactly is the reason for using the global switch ?
A package can be added to the system but until it is published a user cannot start it. They won't see any shortcuts in their startmenu/desktop/etc.
So after you added the package to the system, it must be published to a user or globally (every user) to start it.

What "exactly" does the Brightness setting in Print do?

What "exactly" does the Brightness setting in the Print module do?
I know it's a controversial button, especially now that there are proofing options available. Also, since you're using it "blind" it's impossible to know how much or what it's really doing.
Does anyone know if it's e.g.. the same as going to quick develop and going up on "exposure", or "brightness", or "shadows"... How exactly is it brightening the image, and is +100 a full stop or how is it calibrated?
Thanks,
Alan.

Ooops,
Obviously there is NO brightness control in LR...is the print adjustment similar to an exposure adjustment or more like moving the "shadows" and "whites" adjustments (which if I understand corrrectly, moves tones above or below mid tones, but not highlights or blacks)?

In Mac's PAINTR application, what exactly does the "Splash" function do?

n Mac's PAINTR application, what exactly does the "Splash" function do?

You might also post your question over in the Mac App Store section of the Community, where you might have a better chance of running into someone else using the Paintr App.
Mac App Store: Apple Support Communities
Dennis

What exactly does the colaece option do in TOAD software

Hi,
What exactly does the colaece option do in TOAD software.
Regards,
MuruguPandian P

Coalesce will take ADJACENT free space and coalesce it into one larger free chunk.
A free extent in a dictionary-managed tablespace is made up of a collection of contiguous free blocks. When allocating new extents to a tablespace segment, the database uses the free extent closest in size to the required extent. In some cases, when segments are dropped, their extents are deallocated and marked as free, but adjacent free extents are not immediately recombined into larger free extents. The result is fragmentation that makes allocation of larger extents more difficult.
You should often use the ALTER TABLESPACE ... COALESCE statement to manually coalesce any adjacent free extents. To Coalesce a tablespace give the following command
SQL> alter tablespace ica coalesce;
Source: http://www.oracle-dba-online.com/tablespaces_and_datafiles.htm
Regards
Asif Kabir

Re: In Mac's PAINTR application, what exactly does the "Splash" function do?

In Mac's PAINTR application, what exactly does the "Splash" function do? It isn't mentioned in the Toolbox Documentation, but the "Splash" option is given right next to the "Draw" option at the top of the screen in the application itself.

You might also post your question over in the Mac App Store section of the Community, where you might have a better chance of running into someone else using the Paintr App.
Mac App Store: Apple Support Communities
Dennis

"Check Network Connection" - What Exactly Does the TV Check?

Hi everyone
May I please ask, what exactly does the TV check when I choose "check network connection"?
In other words, when I click the "check network connection", what IP address / servers and ports does it communicate to? What checks does it do?
Because my TV cannot establish a network connection via settings, but the browser works perfectly well,
I would like to carry out the same checks of "check network connection" on my PC.
Then, if failed also on my PC, I would turn to my ISP with the results, as I believe it is the one to fault.

Assuming you're referring to the Airport icon in the menu bar, 'clear/empty' means Airport is turned off, gray bars means Airport is on but not connected to a network, and black bars means Airport is on and connected to a network. Other possible icon states are solid gray with a little computer inset, meaning you're connected to a computer-to-computer created on the Mac, and gray bars with an exclamation point (10.6 only), meaning connected to a network but not authenticated (e.g. wrong password for an 801.2X corporate/university network).
To your question, it's perfectly possible to be successfully connected to a network (black icon) and unable to access the internet. Situations like that would include the network requiring a proxy server, for which you haven't set up the details on in Network Preferences, or you're connected to an open network that requires you to enter information or agree to terms (e.g. a hotel network, where you need to put in your room number and agree to the charges before you can connect to the internet).

What exactly does the AppleCare cover for MacBook Pro with Retina Display?

I purchased the extended protection plan for my MacBook Pro with Retina Display 15" and my question is what exactly does it cover in what kind of situations (i.e. viruses, damaged ports, damaged charger, etc.)? I want to be able to take full advantage of the protection plan since it was a pretty big whole in my wallet.

AppleCare covers all the problems you have with your MacBook Pro with Retina display and the peripherals which came with it (your charger) if you have a hardware problem that you didn't cause. For example, after 2 or 3 years and 1000 charges, OS X says that your battery has to be replaced: in this case, you have to pay for the battery, because batteries have got a lifetime, and Unibody Macs batteries have got an average lifetime of about 1000 charges.
However, if the RAM gets damaged and you haven't done anything to cause it, you will get your computer repaired or replaced for free. AppleCare in a MacBook Pro with Retina display is very important, because near all the parts are soldered into the logic board and repairs are expensive

What exactly does the following do?

i understand what this does.
return(password);
but what exactly does this do?
return (password == null ? "" : password);

got it thanks.
is the reason for this to prevent the javabean getter
from sending a null to a jsp file?
for example, if the setter is not called before the
getter, the value is null and the jsp won't like
this.
could you also initialize the properties of the bean
to ""?That sounds like a reasonable explanation. Depending on the implementation, initializing to "" might work fine or it might have unintended consequences if there's anywhere that a null and an empty string are interpreted differently.

What exactly does the folder "Album Artwork" contain/do?

In the iTunes Library folder is a sub-folder called "Album Artwork". I am wondering what this folder is actually for? Does it save the actual artwork? It only contains itc files, so how would this work? If this is true, why are artworks not embedded in the actual song file?
As you can see , I am confused and would greatly appreciate any input!
Thanks!

3.5Gb??? How big is your library? My entire Album Artwork folder is less than 1% of the size of my iTunes Music folder. If yours is significantly larger then perhaps the artwork folder contains the remnants of multiple libraries. Each of the Download and Cache folders contains a single folder with the same GUID which is connected to my Library. A new library would have a new GUID so presumably a different set of folders. If you have more that one set of folders of this type then delete those which are inactive. Alternatively wipe the entire lot and rebuild it from your embedded art or the store.
"Unembedding" art isn't simple as there is no way to manually link to the download folder. If iTunes doesn't find a match you are limited to embedding art that you paste in and you can't get iTunes to look for store art if the file already has some, so you run the risk of throwing away what you have and having to find it again just to see if iTunes can do it for you.
tt2

What, exactly, does the "Master Slave Config" VI do?

Hi,
I have LV 6.0 and I'm trying to use two NI 6110 boards in a master-slave relationship so that they use the same clock when acquiring analog input. I've found documentation and example on how to do this using the "Route Signal" VI and the "AI Clock Config" VI. All of this work well for me, but I came accross a mention of a "Master Slave Config" VI in the "VI and Function Reference >> Data Acquisition VIs >> Calibration and Configuration" second of the Labview help. The info supplied by this help documention is meager, but there are hints that it might be useful to me and I'd like to figure out what exactly it does. Unfortunately, I can't seem to find any more info about it at the NI website, nor can I find an
y example of how it is used. I found the VI itself in "C:\Program Files\National Instruments\LabVIEW 6\vi.lib\Daq\misc.llb" and discovered that the diagram is very simple. It just calls a DLL routine.
Does anybody have any info on the "Master Slave Config" VI?

The Master Slave Config VI configures one device as a master device and any remaining devices as slave devices for multiple-buffered analog input operations.
The master device sends a trigger or clock signal to the slave device(s) to control the slave device sampling. In a multiple-buffer acquisition, you must enable the slave device before the master device to make sure the slave device always responds to a master signal. If you enable the master device first, it can send a signal to the slave devices before they can respond. You are responsible for the initial startup order. You should always start the master device last. The Master Slave Configuration VI makes sure LabVIEW arms the master device last for each subsequent buffer acquired during a multiple-buffer
acquisition. This is the only help I could find.
I have never used this VI and always use the Route Signal VI because it is a very simple VI to use. I believe the Master Slave Config VI is useful when you don't want to use the Route Signal VI multiple times when you're synchronizing multiple devices.

What exactly does the MasterPageFile="~masterurl/default.master" in the page mean?

Hi Everyone,
I want to create a site definition that use my own master page in the homepage (VS2012 + SP2010). When the site definition is created, there are already codes in the default.aspx page that simply display a string in the body. And the page refers to a
master page at ~masterurl/default.master.
My question is, where exactly does ~masterurl point to? I want to use my own master page to replace it, but when I change it to any other location rather than
~masterurl/default.master, it gives me an error saying file not found.
So could anyone tell me how can I use my own master page in the default.aspx page? I tryied to place my master page file in the LAYOUTS folder and refer to it using
MasterPageFile="_layouts/site.master" but it does not work, either.
Thanks in advance.
Cavendish Feng

Taken from http://msdn.microsoft.com/en-us/library/office/ms476046(v=office.12).aspx
Dynamic token "~masterurl/default.master"
This token references a master page from a content page by using the MasterPageFile attribute together with the value of the MasterUrl property.
As an example, in the following page directive, <%@ Page MasterPageFile="~masterurl\default.master"%>, the token "~masterurl/default.master" is replaced at run time by the value in the MasterUrl property.
This property contains the server-relative full path to the master page, including file name.
Notice the article is talking about these dynamic tokens which are automatically substituted at runtime. Which is what you're seeing.
Static tokens are explained here; http://rehmangul.wordpress.com/2009/12/15/master-pages-in-sharepoint/
basically you have to be careful what path you're specifying, depending on the location of the page.
w: http://www.the-north.com/sharepoint | t: @JMcAllisterCH | YouTube: http://www.youtube.com/user/JamieMcAllisterMVP

What exactly does the iTunes iPhone 5S "back-up to computer" back-up?

Similar Messages

Maybe you are looking for