What happens when I run out of ip addresses on my airport extreme?

Thank you in advance for your help. I have several airport extreme wireless routers, and during peak useage I seem to have run out of ip leases. The initial setup seems to have 200 leases available. Can this be expanded?

Hmmmm. Well I'm not certain what to suggest, other than setting up another network and dividing the clients between the two. Wish I knew more, since there might be some slick solution, but I'm afraid I've exhausted my knowleged base.

Similar Messages

What happens when we run patch_weblogic.cmd

Hi guys,
I wonder how much time does it takes to finish patch_jboss.cmd command. As the doc suggests I made some changes to the jsp and then started this command as part of war deployment. And its almost 25Mns now!
Thanks,
phil

Hi quest,
This patch command for weblogic just doesnt work. I changed only properties file, repaked and ran patch command.
Here are last few line from patch_weblogic.log, Its very big file 13000 lines(1.7MB) if you give ur mail-ID I shall mail you.
Override ignored for property weblogic_server_domain_name
Override ignored for property weblogic_server_target_port
Override ignored for property weblogic_components_dir
Override ignored for property weblogic_jdbc_datasource_name
Override ignored for property datasource.report
[ant] Entering D:\oim9101_install\oim_server\xellerate\setup\weblogic-setup.xml...
Build sequence for target(s) `deploy' is [modifyDDTemplates, non-cluster-init, cluster-init, setup-props, wlappc.ear, cleanUpAndExplode, deploy]
Complete build sequence is [modifyDDTemplates, non-cluster-init, cluster-init, setup-props, wlappc.ear, cleanUpAndExplode, deploy, enableNexawebPrecompile, configuredescriptor, setup-startscript-windows, setup-startscript-unix, stopServer, startServer, configure-web-descriptor, precompilewar, additionalwlsetup, wlspml.ear, cleanUpAndExplodeSPML, deploy-spml-windows, deploySPMLService, setup-startscript, setup, configJAAS, ]
modifyDDTemplates:
[echo] Tuning the message driven bean.
[replace] Replacing in D:\oim9101_install\oim_server\xellerate\DDTemplates\BO\ejb-jar.xml: <message-driven id="MessageDriven_1"> --> <message-driven>
[replace] Replacing in D:\oim9101_install\oim_server\xellerate\DDTemplates\BO\ejb-jar.xml: <message-driven id="MessageDriven_2"> --> <message-driven>
[replace] Replacing in D:\oim9101_install\oim_server\xellerate\DDTemplates\BO\ejb-jar.xml: <message-driven id="MessageDriven_3"> --> <message-driven>
[replace] Replacing in D:\oim9101_install\oim_server\xellerate\DDTemplates\BO\ejb-jar.xml: <message-driven id="MessageDriven_4"> --> <message-driven>
[replace] Replacing in D:\oim9101_install\oim_server\xellerate\DDTemplates\BO\ejb-jar.xml: <message-driven id="MessageDriven_5"> --> <message-driven>
[echo] Tuning of message driven bean is completed.
non-cluster-init:
cluster-init:
Skipped because property 'false' not set.
setup-props:
[echo] setup-props: Initialize Properties
[copy] XL10SecurityProviders.jar omitted as XL10SecurityProviders.jar is up to date.
[copy] log4j-1.2.8.jar omitted as log4j-1.2.8.jar is up to date.
[copy] nexaweb-common.jar omitted as nexaweb-common.jar is up to date.
wlappc.ear:
[echo] Start running weblogic appc utility.
dropping D:\bea\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar from path as it doesn't exist
dropping D:\bea\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar from path as it doesn't exist
dropping D:\bea\WLSERV~1.3\server\lib\weblogic_sp.jar from path as it doesn't exist
[wlappc] Warning, output location exists D:\oim9101_install\oim_server\xellerate\WLXellerateFull.ear
[wlappc] <Jun 1, 2009 2:00:45 PM IST> <Info> <J2EE> <BEA-160186> <Compiling EAR module 'xlBackOfficeBeans.jar'>
[wlappc] <Jun 1, 2009 2:00:51 PM IST> <Info> <J2EE> <BEA-160186> <Compiling EAR module 'xlDataObjectBeans.jar'>
thanks,
phil

What happen when i compile a java prog.

I, to an extend know how to code using java. However I don know what really happens after compiling a java prog and what happens when i run it.. what is JVM, JDK, JIT etc., means.. What is a class file and a jar file and a war file.. I'm confused.. ANy help is really appreciated..
Thanks in advance..
regards.

Java source is compiled into "portable byte code" (a class file).
The JVM (virtual machine) interprets the "portable byte-code" into "machine instructions"... The actual instructions may vary from platform to platform, but the contract is they will allways have the same effect.
JIT stands for "Just In Time"... as usually means "JIT-compiler"... which is fancy pants name for an interpreter.
Google will tell you more.

Lost my iPod, remotely locked it through iCloud. What happens when the battery goes out?

Hello!
I lost my Ipod, but managed to locate and lock it remotely through Find my iPod and iCloud. It was located once, but hasn't been located again in the last four days. I think the battery may have run out. What happens when the battery is charged and the iPod turned back on? Does the lock and everything else that can be controlled with Find my iPod still apply?
Thank you!

Yes, because when you remotely lock the iPod via Find my iPod, the lock code is set as the lock code that you would use to unlock the iPod if you used a passcode normally. As long as the iPod is still connected to your Apple ID, Find my iPod should work as log as the iPod is connected to wifi.

What are your options when you run out of hard drive space?

What are your options when you run out of hard drive space?

I 110% agree, it is a disaster but it saves your mac until you recieve an external HD.
Csound1 wrote:
XcodeDeveloper wrote:
I know but he just wanted options so I gave him one that helped me. If he filled up his HD a Gigabyte is sometimes a small miracle, exaggeration on small .
OSX with 1G of free space is a disaster waiting to happen.
Read this:

My iPOD classic (last generation) shuts off when jostled--like what happens when the headphones come out. Any fix for this?

My iPOD class (last generation) shuts off when jostled--like what
happens when the headphones come out. Is there any fix for this?

I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

HT1657 What happens when you've purchased movies and your iPad had to be restored and it wipes out anything u rented u haven't had a chance to watch

What happens when your iPad crashes,and had to be restored and lost movies I rented that I didn't get to watch,and are gone after the apples tore restored iPad

You can try contacting iTunes support and see if they will grant you a re-download of them : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

What happens when subscription ends

Good Morning,
I have cancelled my dw subscription, just a few days ago, ( it was a cost thing) So today i clicked to see what happens when I open it, it opened but a screen just says to go to my account to straight in out payment info, but also say you have 66 days, for what? If anyone else has cancelled what have they found, I have moved onto Coda 2 and seems good, I do most of my own coding, Thx RJ

Sounds like you paid ahead of time a bit, and canceled with 66 days left on your subscription. You will still be able to use the program for the remainder of the time you have paid, but get a reminder that your subscription is expiring.
After that paid time runs out, you won't be able to use the program at all until you re-up the subscription.

What happens when multiple users access the same servlet?

Do the users share all the same resources? Or is a new process generated for each user? I have a servlet that builds a string to return to the user and I only have myself to test, so I can't really see what happens when many users access the servlet. Is there a possibility that the string will get screwed up, like when dealing with multiple threads, or do all the users get their own resources and I don't have to worry about that?

huh? if you can point a test servlet at it, you can point a browser at it (even if the servlet does not serve html it will run)
try pasting the servlet URL into a web browser
refreshing multiple browsers repeatedly could provide a manual test

What happen when Database in Backup Mode?

Hi,
What happen when we kept database in backup mode, Means using command 'Alter database Begin Backup';
Thanks...
Asit

jgarry wrote:
EdStevens wrote:
jgarry wrote:
What do you think of the snapshot backup on page 22 of [url http://en.community.dell.com/techcenter/storage/w/wiki/2638.oracle-11g-backup-and-recovery-using-rman-and-equallogic-snapshots-by-sis.aspx]this paper? (No sarcasm, I'm curious about these snap solutions in general. Though I am really down on Dell for what turned out to be a brain-damaged laptop I got for my wife.)
Well, you can't really make a judgement about a company's enterprise products based on an experience with their consumer products.What if it came from what they call a business products catalog? They intermingle laptops with servers.
Don't know, in general. I do know that for Dell there is a distinct difference between their decidedly consumer laptops (Inspiron) and their "business" Lattitude series. I know that at my last job we had a lot of rock solid HP equipment (servers and SAN) - vs. an HP laptop I had that was trouble from Day One. I'm sure there is a point in desktops and laptops the line can get blurred, but in the case of the OP, he was no where near that fuzzy line.
>
>>
Perhaps I can find time to read the white paper over the weekend ....

What happened when multiple audio players start at the same time?

Hi,everyone!
I am developing a game, using JMF to play sound.
These sound are stored in mp3 files.
In order to decode mp3 files, I installed JMF and mp3-plugin( jmf-2_1_1e-windows-i586.exe , javamp3-1_0.exe).
In the Game, a background music play back repeatly.When EndOfMediaEvent happened, I setMediaTime(new Time(0)) and then start().It works well.
There are several sound-effects,may start at any time,
so 2 or more sounds may play back at the same time,
and then Strange things happened.
Those sound-effects, usually short, can not play back inextenso.
They lose some beginning part, the length of the part is not constant.
i.e. Audio should start at MediaTime 0, but now they start at MediaTime x, x >= 0,
not only that, sometimes, Audio process bar runs, but no sound heared.
I do not know what is happening.
So please help me, thanks a lot.
The way that I use Players:
initialize:
create realized players from mp3 files
prefetch them
finalize:
deallocate not null players
then close them
using:
player.setMediaTime(new Time(0))
then player.start()
My Environment:
Windows XP, java 1.4.10, JMF2.1.1, MP3-plugin1.0

This is very strange, difficult to guess the cause... never had such an issue. Normally when the object to which the audio is attached disappears the audio stops. So in your case going to a next slide should stop the audio of the previous slide. Same with object audio.
Do you have the different audio clips (one per slide) in the Library? Could you try to delete the audio on the slide and drag it again from the Library to see if you have the same result? And what happens when you attach the audio clip to an object on the slide (you can create a totally transparent rectangle with no stroke that will not be visible to attach the audio).
Lilybiri

VDI3: what happens when the Primary VDI core fails?

A potential customer asked me this and I did not really know how to answer the question ... sorry if this was asked before. So here we go:
What happens when and if the Primary VDI core fails? Will the entire VDI3 setup go down? Will running sessions be lost? And how do you fix that?
I found this page:
http://wikis.sun.com/display/VDI3/MySQL+Cluster+Reconfiguration+Scenarios
So I assume the "Non-VDI host ==> Primary Management Host" scenario is what would need to be done?
http://wikis.sun.com/display/VDI3/MySQL+Cluster+Reconfiguration+Scenarios#MySQLClusterReconfigurationScenarios-NonVdiToPrimary
If this is correct then this would answer the "how do you fix that?" part. OK then.
But still I'd welcome if anyone could explain what exactly would happen when and if a Primary VDI core fails. The customer's opinion on this is that they are a "single point of failure" because the Primary VDI host is not redundant (as opposed to the 2 x Secondary VDI cores) ... So, is this assumption correct or not?
Thanks in advance.

Hi,
Assuming you have 3 VDI core hosts. One of them is the primary. And the primary goes down. So what happens then:
* The underlying database is still running on the remaining hosts
* All desktop sessions are still running on the remaining hosts
* New session requests will be handled by the remaining hosts.
* All desktops are still running on the virtualization hosts.
So in essence, your VDI cluster is still healthy. The operation is just impacted in this way:
* You can't add new VDI core hosts
* You can't change the configuration of the Sun Ray server failover group
* A failure of another VDI core host (data node) will result into a complete outage of the underlying database
You should bring up the primary again as soon as possible in order to gain failover capabilities again.
-Dirk

What happens when Skype for business evaluation expires?

I am testing Skype for business within my company before actually rolling out teh Skype for Business for all. I am using Skype for business evaluation version to test the features and/or and impact it would have on Lync 2013 existing users. I need to know
what happens when the skype for business evaluation patch expires on 1st May 2015, what will the users see? will it switch back to Lync 2013 on its own or do I need to uninstal the package to do so?
Best Regards,
Ketan Tank
+91 9881728161
[email protected]

Hi Ketan Tank,
Agree with Anthony, you can get the updates (KB2889923 & KB2889853) through Windows Update.
The Skype for Business Client will already be activated as it is an update to an existing licensed product.
Best regards,
Eric
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

What happens when the multiply effect is applied to both the object and the graphic within?

Hi everyone,
I could really use some help with this...
I'm getting a booklet ready to be printed. Originally, half of the pages were to be printed on paper with a (physical) colour. For budget reasons however, I've now decided to print the paper colour, and have the content of the pages overprinted on the tint in the background, which I've applied to the pages in the background of an additional master page.
When I set the objects to multiply, they blend with the background colour, which is the effect I'm looking for, as there would be no 'paper white' on the pages that I want to appear as though printed on coloured paper.
There's something confusing me though; you can also set the graphic within the object frame to multiply. This makes the graphic appear darker, which I don't really understand, since there is no extra colour within the graphic that accounts for this. I've looked at the output in the resulting pdf, and it looks like it's not just an on-screen effect, but the extra amount of (in this case) yellow would also be visible in the printed result.
Does anyone have an explanation for this? Please see the graphic for a visual example.
Thanks in advance, kind regards
Robbin

Hi.
          Yes. There is a heartbeat mechanism between all cluster members so they detect when a
          member has left the cluster. The primary server recognizes when it's secondary server
          has failed, and then proceeds to search for another member of the cluster to make as
          it's new secondary.
          Regards,
          Michael
          David Whitehouse wrote:
          > I'm trying to figure out what happens when the server holding the replicated state
          > for an object fails.
          > Does the server with the primary object (or the replica-aware stub) recognize
          > the failure and select a new
          > server to hold the replicated state?
          >
          > For instance, Assume I have a cluster defined with three servers - 1,2,3 - with
          > an instance of object A on server 1
          > and the replicated state ino on server 2. What happens if server 2 fails? Is the
          > state now replicated to server 3?
          >
          > Thanks, David
          Michael Young
          Developer Relations Engineer
          BEA Support

What happens when the Time Machine drive is full?

I'm on my second iMac. My first one (G5, 1984) died, and I replaced it early 2010 with an Intel mac. The transition when exceedingly well largely due to Time Machine. I just hooked the Time Machine drive to the new system, and I was soon back up running!
My home folder has 70GB of data. The Macintosh drive has 105GB of data and 395GB free. The Time Machine drive has 220GB used and 30GB free.
1. What happens when the Time Machine drive is full?
2. Do I have control over what backups get deleted?
3. If lightning strikes twice, will I still be able to restore my Intel mac like my G5 mac, even if backups get deleted?
4. Is there anyway to control what backups/backup files get deleted?
5. Any other thoughts?
Thanks.

maxseven wrote:
i have deleted the time machine folders and they are now in my trash. when i try to secure empty my trash it will delete everything but the t/m folders. how do i delete them?
Do you mean all of them? The entire Backups.backupdb folder?
That's a large mess. First, even a normal delete will take a very long time, as there are probably hundreds of thousands, or even millions, of files. Your best bet by far is to simply erase them with Disk Utility -- that will only take a few moments. If your TM drive has a single partition, see #1 in [Formatting, Partitioning, Verifying, and Repairing Disks|http://web.me.com/pondini/AppleTips/DU.html]. If there are other partition(s) on the drive, see #2 there.
If not, and you only deleted some of the folders, you have a different, worse problem. Unfortunately, Apple doesn't do a very good job of warning folks: +*Never move, change, or delete anything in your backups via the Finder or Terminal.+*
You shouldn't have to delete backups at all, since Time Machine will do that automatically when the disk/partition gets full. But you can do it without harm via Time Machine. See #12 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
A normal delete will take a very long time, as there are probably tens or hundreds of thousands of items, each of which must be individually deleted. A secure delete will take much, much longer, as each deleted file must be overwritten with zeros.

What happens when I run out of ip addresses on my airport extreme?

Similar Messages

Maybe you are looking for