What if I close timed-out sessions without calling OCIBreak/OCIReset?

In non-blocking mode it is mentioned in the document that I should call OCIBreak/OCIReset if I want to time-out the session, and these calls will reset the session.
Then, is it ok NOT to call OCIBreak/OCIReset if I want to simply close the timed-out sesion, free everything including the environment handle, and establish everything all over again? Here, each session has its own environment handle and all other threads will keep executing queries within the process. I think my client will clearly be ok to do so, but I'm concerned about possible server-side effects of not OCIBreak/OCIReset the session. Will the sesion be destroyed on the server immediately without client's calling OCIBreak/OCIReset when I destroy everything?

You should call OCIBreak and then disconnect. Last time I checked, OCIBreak performs a TTC OCANCEL operation on the server which would allow you to cleanly disconnect. I'm not sure, but as part of disconnecting, OCI may do this itself. If you don't disconnect cleanly, the server's PMON process will employ dead connection detection (DCD) to determine when to reap your old process. DCD is configurable, but it's best to disconnect cleanly.

Similar Messages

Timed out session

Hi,
How can we determine if the request is coming from a timed out session.
Could you please let me know about this.
Thanks.

When creating a session for the new user, you will need to put an entry in their cookies saying "I just made a session for you". That entry should expire when they close their browser, which I believe is default timeout. Then anytime you goto create a new session for a user that doesn't have one, check to see if that cookie entry is there. If it is, then this person's session timed out. If not, create session and entry and let it go.

Timed out session, port 143

Hello! I got some problems with my mail. I have entered everything correctly into Mail but I get only timed out session 143. Nothing more to say really, Thanks in advance, Morgan.

Ernie,
Weirdly, I checked software update and that can't get a connection either, and yet I have good internet and am receiving and sending mail fine from all accounts.
When i try to move a mail from my works IMAP to a .mac folder, it starts to move it but then the connection speed seems to plummet as though it's being choked somewhere?
I'll try the SSL. is that just on the Incoming or the outgoing or both?

Automatic disconnection from AP when timed out (session or authentication) from captive portal

Captive portal implementation permits/blocks web traffic. When a user is timed out (authentication & session) it still occupies a channel as seen in the clients list. How can we disconnect a host that is timed out?

There is NO Failed Authenticated list.These are the only available tabs in the lapac1200Captive Portal Global Configuration Portal Profiles Local User Local Group Web Customization Profile Association Client Information

Timed out session keeps appearing, why?

WWhen watching Sky on my IPad I keep getting the message "your session has timed out" then the programme stops and goes to to the home screen. Please can any one throw some light on why this might be happening.

I've been having the same issues too, and thought it was just my outdated computer or account?!
Every time I try to purchase a song, "session has timed out" shows up after I click "agree" to the terms!? I seem to be in the exact same scenario as 'SportsBarn' above: Itunes support have replied repeatedly with the same "solutions" but nothing has helped or even been applicable. I have an older laptop, 2005 Powerbook running OS X 10.4 Tiger so it's not compatible with the latest iTunes 10.5.2 which requires minimum OS X 10.5. I've been using the balance already in my iTunes account (from redeemed giftcards over the past few years) with no problem, until recently (my last successful purchase was October 2011). I wonder if it's the older OS or just a redemption glitch even with newer computers?

What is a ssrv timed out?

I just had a message popup saying " ssrv timed out". What is that about? First time I saw that.

this has happened to me when developing some software using CKEditor. It seems to only appeared since i've enabled spell check on load. Would like to get rid of it if anyone knows a solution.

The Opration timed out occurred on calling REST Service in Addin in windows 7 ultimate 64 bit

Hi,
I have created VSTO solution for Outlook Addin in Visual studio 2010.
In that on button it will call Java REST webservice and validating the username and password.
Evrything working fine in few systems.But it showing "The operation timed out" in WIndows 7 64 bit office 2013.
In other windows 7 machine with office 2010 and 2007 its working perfectly.
Below is the code :
var responseMessage = (String)null;
var request = WebRequest.Create(string.Concat(serviceUrl, resourceUrl)) as HttpWebRequest;
if (request != null)
request.ContentType = "application/xml";
request.MediaType = "text/xml";
request.Method = method;
request.keepalive=false;
request.ContentLength = xmlRequestBody.Length;
ServicePointManager.Expect100Continue = false;
//var objContent = HttpContentExtensions.CreateDataContract(requestBody);
if (method == "POST" && xmlRequestBody != null)
byte[] requestBodyBytes = ASCIIEncoding.UTF8.GetBytes(xmlRequestBody.ToString());
request.ContentLength = requestBodyBytes.Length;
using (Stream postStream = request.GetRequestStream())
postStream.Write(requestBodyBytes, 0, requestBodyBytes.Length);
if (request != null)
request.Credentials = new NetworkCredential("Username", "password");
//request.ProtocolVersion = HttpVersion.Version11;
var response = request.GetResponse() as HttpWebResponse;
if (response.StatusCode == HttpStatusCode.OK)
Stream responseStream = response.GetResponseStream();
if (responseStream != null)
var reader = new StreamReader(responseStream);
responseMessage = reader.ReadToEnd();
else
responseMessage = response.StatusDescription;
return responseMessage;
Could you please help what could be the reason.Any firewall issue or any serviced related issue.Kidly suggest.

Hi,
I have created the windows application using REST Service and tested the application on
windows 7 64 bit Ultimate edition but I'm getting the same error "The
operation timed out" attached the screen shot for your reference.
http://www.screencast.com/t/YeIJxl383a
I developed the application on Windows 7 Ultimate 64 bit version it is working on my machine. while the executing exe on another windows 7 64 bit Ultimate
edition which is on the virutal machine Im getting the error.
There is no visual studio installed on the Virtual machine , i have installed the Dot Net frame work 4.0 client profile on the virtual machine.
Could you please suggest is there any issues related to opearating system or related to framework.
Kindly help with some suggestions.

Getting Timed out exception while calling a web service

Hi,
when i am invoking a web service(using routing), the osb proxy is getting timed out before receiving the response from routed service.
Also we are not aware of how much response time the routed service will take. so apart from increasing the connection time is there any alternate solution?
can any one suggest.

I do not think there is any other way apart from increasing timeouts to call a web service from OSB synchronously which is taking a long time.
Other alternatives are either to make the service asynchronous delyed request response type, which will mean a change at the backend webservice.
Ideally synchronous web services are designed to respond within a few seconds and not take minutes for processing. I would say that if the backend web service is taking more than a minute then they need to either tune their service performance better so it responds faster OR change it to an asynchronous service.

Timing out a WTC call

Hi
I am making an outbound WTC call to a webservice from my tuxedo service.
Is there a way I can set a timeout to this specific call so that if this WTC call is responding after specific time, I can continue with my flow in the tuxedo service.
I am assuming that BLOCK TIME is used to the tuxedo service as a whole. But this could impact my other flows where I am OK to wait for more time.
Basically below should be the flow of tuxedo service
tuxservice01
status = tpcall("wtcWebService01", (char *)pInpRec,0, (char **)&pOutBuf, &olen, FLAG ); /* Not sure about the flag to be used in this case */
if(status != 0)
if(tperrno == TIMEOUT)
handle timeout
goto nextstep
nextstep
Thanks
Raj

Hi Raj,
Depending upon the version of Tuxedo you are using, you may be able to set BLOCKTIME on a per call, per context, or per service basis. Starting with Tuxedo 9.0, the time to wait on a blocking call can be set either in the *SERVICES section of the UBBCONFIG file, or using the tpsblktime() function to set it on a per call or per context basis. Please note that timing out a request with BLOCKTIME doesn't abort the request, i.e., the request will still likely be processed, although that depends upon a number of factors. BLOCKTIME simply limits the amount of time a blocking call will wait to be unblocked.
Regards,
Todd Little
Oracle Tuxedo Chief Architect

Reference to Object located in timed-out session

Hello forum!
I have searched but couldn't find eny answer to following problem:
I'm developing a web application (struts & Co.) that communicates with different processes.
Situation:
In struts action I'm getting some object from session (that I have put there)
and giving as a parameter to some process P that changes some attributes of this object. I am showing these changes ("interactively") on JSP (e.g. user clicks F5 to see them dynamically).
The question is, what happens when that process lasts longer then my session timeout? Gets it null on some try or what happens at all?
Hope I've explained the problem correctly.
Thanks in advance.

Thanks for reply!
It seems I haven't explained the problem correctly. I've checked it - there happens nothig(no null).
The process has got the object that is in session, not session object itself. So it has no idea what happens in session and after session is dead it is working for nothing... My session will never find out what has happend with that object...
Thanks a lot.
gio.

Removing and timing out sessions

I added following lines to remove my session variables.
<% //session remove
session.removeAttribute("simplesession.usernme");
session.removeAttribute("simplesession.password");
session.removeAttribute("simplesession.msg");
%>
But looks like still its there...
Whats wrong with my code ?
How do I timeout the sessions...

session.invalidate() will remove the session and clear all objects/variables.

Timed-out sessions not clearing

Hello,
Need some expert advice... I have WebLogic version 10.3.6 and we are deploying a custom WebCenter Portal application (11.1.1.8.0) onto the server. In weblogic.xml of the application we have set the session descriptor as follows -
<session-descriptor>
    <timeout-secs>4200</timeout-secs>
    <invalidation-interval-secs>60</invalidation-interval-secs>
    <cookie-name>WCP_JSESSIONID</cookie-name>
    <persistent-store-type>MEMORY</persistent-store-type>
    <url-rewriting-enabled>false</url-rewriting-enabled>
    <sharing-enabled>false</sharing-enabled>
</session-descriptor>
Now as per my understanding, after 4200 seconds ie 70 mins, inactive sessions must timeout and should stop appearing in the Sessions subtab in the Monitoring tab of the application. But these never clear up! When we go to the Configuration tab, see can see the same config as above. Any clues?
Let me know if more information is needed.
Much appreciated.
Thanks,
-NA

create a httpsessionlistener and add debug, also enable http session debug.. this will help debug the issue.
-Faisal

What is the connection timed out error? I have an iPod touch 4G which is just 2-3 days old.

It is just 2 days old, s not many songs or photos in it!

If you get that error when downloading/installing the update, disabling the computer's security software usually eliminates that error.

Wget - Connection timed out when using "long" strings

I'm having a problem with a little script to change some settings for IP-phones. Here is the script:
#!/bin/bash
for i in "0" #"4"
do
for j in $(seq 176 176)
do
wget --timeout=1 --tries=1 --keep-session-cookies --save-cookies cookies.txt --post-file=postfile http://192.168.$i.$j/dologin.htm
wget --timeout=1 --tries=1 --load-cookies cookies.txt --post-file=postfile2 http://192.168.$i.$j/update.htm
done
done
postfile looks like this and is just for logging in:
P2=<pass>&
postfile2 looks like this:
P270=123456&
The problem now is, when using it like above, everything works fine. But if I make the text in postfile2 one character longer, I get this:
Connecting to 192.168.0.176:80... connected.
HTTP request sent, awaiting response... Read error (Connection timed out) in headers.
Giving up.
It doesn't matter where I put the character to make the string longer (I can for example use P32=1234567& and it works). I have tested the script from different machines and used different phones, always the same. Any ideas?

daf666 wrote:The two files look identical, are you sure that the "bad" one is actually a capture of the timed out session? (both have same data length and same value in the content-length header).
Yes, they are different and the bad is is from the timeout .
daf666 wrote:Anyway, this timeout might occur, if for some reason wget will say content length is 10 and send only 9 characters in the post request..
Any idea what I can do about it? There is something fishy going on. I did this once before a few month ago when I wanted to change other settings. I tried to do the same thing again but even this doesn't work anymore. Maybe I should just try curl .

Losing Airport/ Get message "connection timed out" when try to re-connect

This has happened several times over the past few days. First time, trying to re-connect, it didn't see my network name. Then re-entered name, selected/joined, password shows up, but connection times out. Tonight, it saw my name, password showed up, but wouldn't connect, not matter what, with message "connection timed out."
Both times the only thing that worked was a re-start. Tonight, even after a re-start, got "connection timed out" message at first, but was able to get back on by clicking on the icon. I see the following logs.
Error: airportd MIG failed = -6 ((null)) (port = 26123)
Macintosh-3 Apple80211Agent[91]: Error joining .......: Connection timeout (-6 timeout connecting)
Macintosh-3 airportd[673]: Error: Apple80211Associate() failed -6
Until this happens, the connection is solid, usually with 54 mbs. I've googled around for these logs, but haven't seen anything conclusive. Any ideas? Thanks.

Don't mean to add to the possible confusion here, but most newer routers (Apple included) allow their users to "hide" their network, so it's also very possible and likely in an apartment situation that you can pick up interference from a network that you or Air Radar cannot "see".
So, trying to find the "right" channel becomes a bit more of guessing game.
Understand that you need "g" for your devices. For the future though, you might watch the Air Radar screen for channels in the 36-48 and 149-161 range to see how much less activity is going on there.

What if I close timed-out sessions without calling OCIBreak/OCIReset?

Similar Messages

Maybe you are looking for