What is a good program for converting avi and mpeg to mp4 for ipod video?

as of 20 minutes ago, c u c u s o f t ipod video converter stoped working for me... it wont convert audio with the video... wont even read audio(i instaled the codec pack so that i could convert a file that wouldnt read on my computer...)
i have used videora, c u c u s o f t, TONS but i cant afford to buy the full software, so im looking for a FREE, program that will not leave a nasty watermark or glitch the video files... if anyone can help, that would be GREAT:D
P.S. i have used itunes and get no video... i know about the tv out settings or whatever and thats not the case... so i will not be using itunes... sorry anyways ADVICE IS GREATLY APRECIATED

wow... i think i'll try that one out i'll let u know how it works for me(im on a fossil computer so i have to test things out...)
BY THE WAY, I GOT MY AUDIO WORKING ON CU CU SOFT but still have my eyes open for the NEXT BIG THING in conversion software

Similar Messages

  • Could someone please recommend the best program to convert AVI and MPEG files for use (and exporting) into IMovie 11?

    Hi - I understand I need to convert AVI and MPEG files for use within IMovie 11. I have one particular file that has a watermark stating "Created with Flip4Mac WMV Demo". Can someone please recommend the best program for a novice?  Thanks!

    Hi Susan,
    It is no simpler converting vobs to mp4 than mpg (mpeg2).
    There is *always* a loss of quality converting video from one lossy-compressed format to another, e.g. mpeg2 to mp4.
    So, if you want to not lose any quality, then converting vobs to mpeg2 (mpg) is the thing to do (since there will be no video/audio re-compression), assuming Lr5 will accept them (sorry, but I do not know). example commands:
    Mac: ffmpeg -i myvideo.vob -sameq myvideo.mpg
    Win: ffmbc -i myvideo.vob -sameq myvideo.mpg
    If Lr5 won't accept them, then you can convert to mp4 with minimal quality loss using a command like:
    Mac: ffmpeg -i myvideo.vob -sameq myvideo.mp4
    Win: ffmbc -i myvideo.vob -sameq myvideo.mp4
    You may need variations of these commands depending on encoding of vob.
    Note: -i means -input-file; -sameq means -same-quality, as much as possible.
    ffm... is smart enough to avoid re-encoding, if possible, when -sameq is used, and makes reasonable choices for audio/video codecs based on extension of output file.
    Of course, you'll need to download/install ffm... program if not already on your machine, and execute commands in a terminal or command window.
    Do keep us posted please .
    Cheers,
    Rob

  • What is a good bitrate for my video (mp4 website embed)?

    I'm trying to encode some music videos with PE to embed on my website as mp4 (streaming with jw player).
    How do I figure out a bit rate for maximum quality yet no buffering delays.  I should probably assume some of my viewers will have relatively slow 1mb dsl connections.
    From what I understand, these are good settings:
    share>computer:  Quicktime/.mov
    Video Tab
    *Video Codec: H.264
    *Quality: 100
    *Field Type: Progressive
    *Pixel Aspect Ratio: square
    *Set Bitrate: checked
    Audio Tab
    *Audio Code: AAC
    *Output Channels: Stereo
    *Frequency: 44kHz
    My video dimensions are either 560x315 or 600x334. 
    I saw in another thread that 8000kbps bitrate is good for a 720p youtube encode, though that obviously makes a huge file for website streaming.  Been trying to figure it out, but very confused. Thanks for any suggestions!

    These output settings should give you excellent results on most oline video sites.
    http://forums.adobe.com/thread/623549?tstart=0
    However, if you're outputting video for a web site, here's what I recommend in my book:
    Share/Computer/MOV (this will produce an MP4):
    Video:
    Video Codec:H.264
    Quality: 65%
    Frame Rate: 15fps
    Field Type: Progressive
    Limit Data Rate to 55 kbps
    Audio:
    Audio Codec: AAC

  • What is a good codec to convert MTS too for edting?

    I heard that MTS or AVCHD footage is not good to edit with. What is a good codec to convert too?

    No.
    "Rendering" in working through PrPro is actually just telling the program to take the instruction set for an area selected and create new previews for that section. They are NOT really to be used in any final export process (there are only about two format/codecs that would work that way, and likely no one reading this is using them ... ) but JUST for playability in "real time" in the monitors during editing.
    It is needed if between the computer specs & drive layout, the number of effects called for in a clip, and the particular codecs used, the playback causes the GPU to "drop frames" or get slow/erratic in motion. You simply select that section of the sequence, then right-click or go to the upper menu system or keyboard-short to "render selection". You computer runs for a bit, then ... playing back that section should be full-speed.
    Someone who say uses mts files (which can at times be a bit of work behind the scenes for the hardware) and never needs to render before he's done with a project and exports it is saying that his computer handles mts file just fine with the level of effects he uses without needing to render any sections or suffer 'dropped frames' on playback.
    Neil

  • What's a good book for getting started?

    I've been doing web design in HTML and ColdFusion for almost 3 years. It's clear that ColdFusion is on it's way out and I need to learn J2EE/Java/JSP etc. I have a few questions:
    Java is a term I've heard associated with C++ and other types of programming as well as Web design. Are the Java/C++ Java and the Web Java basically the same type of language? Is the Web Java and JavaScript the same thing? I'm very confused!
    What is a good book for getting these types of questions answered and getting started in J2EE/Java/JSP? There are quite a few variations of script languages out there and I want to make sure I learn the right stuff, ie the stuff that employers are going to be needing.
    Thanks!

    Here is a free online version of a good book:
    http://pdf.coreservlets.com/Core-Servlets-and-JSP.pdf
    Print it off or read from the screen. Otherwise, there are several good Java books out there. What I would do is go to the bookstore and thumb through a few books. Depending on what type of book you want (example based or theory) find the books that you think would satisfy your learning style. Write down the names and authors, go home and buy them used online at Amazon for tremendous discounts. This way you can buy several versus just one.

  • What is the best program for designing event flyers? I am looking for something basic and simple.

    What is the best program for designing event flyers? I am looking for something basic and simple.

    Poor old Photoshop® is forever being put down when it comes to layout work, but it is perfectly capable, and can output a high quality print PDF the printer will be perfectly happy with.  OK you don't have the text flow between columns bells and whistles of InDesign and [spit] Publisher, but if you have a $10/month Photoshop/Lightroom subscription, instead of the $50/month full subscription, don't think you can't do a perfectly good flyer or poster.
    https://helpx.adobe.com/photoshop/how-to/align-objects-guides.html

  • What's the best program for print? especially for newsletter, flyers, and catalogs?

    what's the best program for print? especially for newsletter,
    flyers, and catalogs? is FH going to be deprecated? thanks,
    bryan

    > what's the best program for print? especially for
    newsletter, flyers, and catalogs? is FH going to be deprecated?
    thanks, bryan
    If you have used FreeHand before it is sill FreeHand of
    course - as long as it works in our OS and there are no new
    features you like to use.
    If you have documents with a lot of text elements and
    multiple pages InDesign may be the second best choice. For
    typography it is the best tool available.
    Illustrator is more for illustrations, although it seems that
    it has good control for type it is clumsy and there are a few major
    bugs that makes it unsuitable for body text.
    Jukka

  • What's the standard program for smartform : HR_ECM_CRS

    Hi Friends
    what's the standard program for smartform : HR_ECM_CRS?
    <REMOVED BY MODERATOR>
    Regards,
    Sree
    Edited by: Alvaro Tejada Galindo on Feb 21, 2008 4:14 PM

    hi
    good
    check this link, hope this would help you to solve your problem.
    http://saphelpbykevin.blogspot.com/2006/09/compensation-review-statement-confusion.html
    thanks
    mrutyun^

  • Best Program for DVD/Video converting

    What is the best program for converting DVDs and videos? I know one is videora or something like that. I want something that is easy to use and dosen't take up alot of time to install.

    GUIDES TO: Converting Video for iPod - Mac & Window
    http://forums.ilounge.com/showthread.php?s=&threadid=123067
    Patrick

  • What is a good strategy for keeping the OEM GRID up and running?

    Hi,
    What is a good strategy for keeping OEM GRID up and running? Currently, we have grid installed on one linux64bit box with 4 cpus and 8 gigs of RAM, oms 10204, repdb 10204, agent 10204. In addition to using this oem grid for notifications and performance monitring, we are also using this oem grid for scheduling over 700 jobs running over 30 targets.
    What is a good strategy to have to backup the grid so that when this box goes down, we can restore and then recover the grid? Please lead to white papers or documentations. Thank you.

    Take a look at Oracle Maximum Availability Architecture, a set of architectural recommendation on setting Oracle software up for high availability.
    The information is available on this page:
    http://www.oracle.com/technology/deploy/availability/htdocs/maa.htm
    Look under HA Best Practices for Grid Control.
    Chung Wu
    [Application Management Blog|http://www.appmanagementblog.com/]

  • What's a good program to use to make flyers and handouts with?

    What's a good program to use to make flyers and handouts with? I'm not a wiz with computers so nothing too sophisticated is needed. Thanks!

    Pages would be fine but there are hundreds, I'd recommend using the Mac App Store.

  • What is a good program to install windows via a flashdrive...Have the iso

    What is a good program to install windows via a flashdrive...Have the iso...

    What are you trying to do?
    You can install Windows in a Boot Camp partition and have a Dual Boot system where you run one operating system at a time. Either Windows or Mac OS X.
    Or you can use one of the 3 available virtual machine software parograms to install Windows in a virtual machine on top of Mac OS X. Then you can run both Windows and OS X at the same time.
    If you go with the Boot Camp option then you really need to burn that ISO file onto a DVD disc as Boot Camp likes to install from disc.
    If you go with the virtual machine option then you can use that ISO file as it is to install Windows. You will just point the VM to the USB thumb drive to find the Windows OS to do the install from.

  • What is the bdc program for vendor master?

    what is the bdc program for vendor master?

    Hi,
    Find the code here.
    And do create your text file data in the order of itab structure.
    {report ZBDC_XK01
           no standard page heading line-size 255.
    data: bdcdata like bdcdata occurs 0 with header line.
    data: begin of itab occurs 0,
    lifnr like lfa1-lifnr,
    bukrs like RF02K-bukrs,
    ekorg like RF02K-ekorg,
    ktokk like RF02K-ktokk,
    anred like lfa1-anred,
    name1 like lfa1-name1,
    sortl like lfa1-sortl,
    land1 like lfa1-land1,
    spras like lfa1-spras,
    waers like lfm1-waers,
    end of itab.
    selection-screen begin of block blk1 with frame.
      parameters: p_file like rlgrap-filename OBLIGATORY.
    selection-screen end of block blk1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_file.
      perform f4_help_p_file.
    start-of-selection.
      perform get_data.
      perform upload.
    END-OF-SELECTION.
    *&      Form  f4_help_p_file
          text
    -->  p1        text
    <--  p2        text
    form f4_help_p_file .
    data: v_file like p_file.
      CALL FUNCTION 'F4_FILENAME'
        IMPORTING
          file_name = v_file.
      CHECK sy-subrc EQ 0.
      p_file = v_file.
    endform.                    " f4_help_p_file
    *&      Form  get_data
          text
    -->  p1        text
    <--  p2        text
    form get_data .
    data: s_file type string.
      s_file = p_file.
    CALL FUNCTION 'GUI_UPLOAD'
      EXPORTING
        filename                      = s_file
        FILETYPE                      = 'ASC'
        HAS_FIELD_SEPARATOR           = 'X'
      HEADER_LENGTH                 = 0
      READ_BY_LINE                  = 'X'
       DAT_MODE                      = 'D'
      CODEPAGE                      = ' '
      IGNORE_CERR                   = ABAP_TRUE
      REPLACEMENT                   = '#'
      CHECK_BOM                     = ' '
    IMPORTING
      FILELENGTH                    =
      HEADER                        =
      tables
        data_tab                      = itab
    EXCEPTIONS
      FILE_OPEN_ERROR               = 1
      FILE_READ_ERROR               = 2
      NO_BATCH                      = 3
      GUI_REFUSE_FILETRANSFER       = 4
      INVALID_TYPE                  = 5
      NO_AUTHORITY                  = 6
      UNKNOWN_ERROR                 = 7
      BAD_DATA_FORMAT               = 8
      HEADER_NOT_ALLOWED            = 9
      SEPARATOR_NOT_ALLOWED         = 10
      HEADER_TOO_LONG               = 11
      UNKNOWN_DP_ERROR              = 12
      ACCESS_DENIED                 = 13
      DP_OUT_OF_MEMORY              = 14
      DISK_FULL                     = 15
      DP_TIMEOUT                    = 16
      OTHERS                        = 17
    IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    stop.
    ENDIF.
    endform.                    " get_data
    *&      Form  upload
          text
    -->  p1        text
    <--  p2        text
    form upload .
    loop at itab.
    perform bdc_dynpro      using 'SAPMF02K' '0100'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-KTOKK'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'RF02K-LIFNR'  itab-lifnr.
    perform bdc_field       using 'RF02K-BUKRS' '0001'.
    perform bdc_field       using 'RF02K-EKORG'  '1000'.
    perform bdc_field       using 'RF02K-KTOKK' '0001'.
    perform bdc_dynpro      using 'SAPMF02K' '0110'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-SPRAS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFA1-ANRED' itab-anred.
    perform bdc_field       using 'LFA1-NAME1' itab-name1.
    perform bdc_field       using 'LFA1-SORTL' itab-sortl.
    perform bdc_field       using 'LFA1-LAND1' itab-land1.
    perform bdc_field       using 'LFA1-SPRAS' itab-spras.
    perform bdc_dynpro      using 'SAPMF02K' '0120'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFA1-KUNNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0130'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFBK-BANKS(01)'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPMF02K' '0210'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-AKONT'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0215'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB1-ZTERM'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0220'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFB5-MAHNA'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_dynpro      using 'SAPMF02K' '0310'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'LFM1-WAERS'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '/00'.
    perform bdc_field       using 'LFM1-WAERS' itab-waers.
    perform bdc_dynpro      using 'SAPMF02K' '0320'.
    perform bdc_field       using 'BDC_CURSOR'
                                  'RF02K-LIFNR'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=ENTR'.
    perform bdc_dynpro      using 'SAPLSPO1' '0300'.
    perform bdc_field       using 'BDC_OKCODE'
                                  '=YES'.
    call transaction 'XK01' using bdcdata mode 'A'.
    refresh bdcdata.
    clear itab.
    endloop.
    endform.                    " upload
    *&      Form  bdc_dynpro
          text
         -->P_0126   text
         -->P_0127   text
    form bdc_dynpro  using   program dynpro.
    clear bdcdata.
      bdcdata-program  = program.
      bdcdata-dynpro   = dynpro.
      bdcdata-dynbegin = 'X'.
      append bdcdata.
    endform.                    " bdc_dynpro
    *&      Form  bdc_field
          text
         -->P_0316   text
         -->P_0317   text
    form bdc_field  using    fnam fval.
    clear bdcdata.
      bdcdata-fnam = fnam.
      bdcdata-fval = fval.
      append bdcdata.
    endform.                    " bdc_field}
    Reward points if you find it helpful
    Thanks,
    Prasanna

  • What is the best program for playing games,dics,3d settings such as "groove setting"

    what is the best program for playing games,dics,3d settings such as "groove setting"?

    Aubry,
    why don't you send your sequences straight to Compressor first, encode your movies as MPEG 2 and AC3 audio and import all assets in DVD studio PRO?
    G.

  • What's the best program for making a header containing rollover navigation links?

    I have all CS4 programs and I'm looking to make a header that contains an interactive rollover nav bar. I want the bar to be located within the header. What is the best program for creating the header and rollover buttons. I'm aware i could manipulate the images in other programs, but placement and rollover button creation is what I'm looking for. Thanks. I'm thinking maybe flash or fireworks?

    Spry can do this for you.  See some samples here:
    http://labs.adobe.com/technologies/spry/samples/menubar/MenuBarSample.html
    Or there are commercially available menu systems from the likes of companies like Project Seven, whom I would personally recommend:
    http://www.projectseven.com/

Maybe you are looking for