What is a system code ?

Hi experts,
SAP requested system code for remote access to my BW system. Can anybody tell me what is system code?
Thanks in advance.
Sharat.

Hello,
Go to sap logon, and choose the system ID and click on "Change" (like changing the settings) you'll see the denomination of the system, the application server, system ID, system number.
Sent that info to SAP, that should be sufficient for them to find the system.
Please assign points if it helps,
Diogo.

Similar Messages

What is the Pin Code for unlock for Macbook Air System Lock ?

What is the Pin Code for unlock for Macbook Air System Lock ?

It usually means that the owner of the device sent a directive through icloud(find my mac), to lock the device because it has been stolen.
The only means to unlock the device is to have Apple (Apple Store) unlock it for the owner. If you are the owner, be prepared to show proof of legitimate ownership. It is likely that Apple will want to contact the registered owner to make sure that the device has been legitmately transferred.
I'm really thinking you may have bought stolen property. Ask the seller why it is locked, and if the device is registered to him/her, to release the registration on Apple's website. Only then, will you be able to re-register the device in YOUR name.

HELP PLEASE - WHATS WRONG WITH THIS CODE

Hi. I get this message coming up when I try to compile the code,
run:
java.lang.NullPointerException
at sumcalculator.SumNumbers.<init>(SumNumbers.java:34)
at sumcalculator.SumNumbers.main(SumNumbers.java:93)
Exception in thread "main"
Java Result: 1
BUILD SUCCESSFUL (total time: 2 seconds)
I am not sure whats wrong with the code. Any assistance would be nice. The code is below.
package sumcalculator;
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
public class SumNumbers extends JFrame implements FocusListener {
JTextField value1;
JTextField value2;
JLabel equals;
JTextField sum;
JButton add;
JButton minus;
JButton divide;
JButton multiply;
JLabel operation;
public SumNumbers() {
SumNumbersLayout customLayout = new SumNumbersLayout();
getContentPane().setFont(new Font("Helvetica", Font.PLAIN, 12));
getContentPane().setLayout(customLayout);
value1.addFocusListener(this);
value2.addFocusListener(this);
sum.setEditable(true);
value1 = new JTextField("");
getContentPane().add(value1);
value2 = new JTextField("");
getContentPane().add(value2);
equals = new JLabel("label_1");
getContentPane().add(equals);
sum = new JTextField("");
getContentPane().add(sum);
add = new JButton("+");
getContentPane().add(add);
minus = new JButton("-");
getContentPane().add(minus);
divide = new JButton("/");
getContentPane().add(divide);
multiply = new JButton("*");
getContentPane().add(multiply);
operation = new JLabel();
getContentPane().add(operation);
setSize(getPreferredSize());
addWindowListener(new WindowAdapter() {
public void windowClosing(WindowEvent e) {
System.exit(0);
public void focusGained(FocusEvent event){
try {
float total = Float.parseFloat(value1.getText()) +
Float.parseFloat(value2.getText());
sum.setText("" + total);
} catch (NumberFormatException nfe) {
value1.setText("0");
value2.setText("0");
sum.setText("0");
public void focusLost(FocusEvent event){
focusGained(event);
public static void main(String args[]) {
SumNumbers window = new SumNumbers();
window.setTitle("SumNumbers");
window.pack();
window.show();
class SumNumbersLayout implements LayoutManager {
public SumNumbersLayout() {
public void addLayoutComponent(String name, Component comp) {
public void removeLayoutComponent(Component comp) {
public Dimension preferredLayoutSize(Container parent) {
Dimension dim = new Dimension(0, 0);
Insets insets = parent.getInsets();
dim.width = 711 + insets.left + insets.right;
dim.height = 240 + insets.top + insets.bottom;
return dim;
public Dimension minimumLayoutSize(Container parent) {
Dimension dim = new Dimension(0, 0);
return dim;
public void layoutContainer(Container parent) {
Insets insets = parent.getInsets();
Component c;
c = parent.getComponent(0);
if (c.isVisible()) {c.setBounds(insets.left+24,insets.top+48,128,40);}
c = parent.getComponent(1);
if (c.isVisible()) {c.setBounds(insets.left+256,insets.top+48,128,40);}
c = parent.getComponent(2);
if (c.isVisible()) {c.setBounds(insets.left+408,insets.top+48,56,40);}
c = parent.getComponent(3);
if (c.isVisible()) {c.setBounds(insets.left+488,insets.top+48,152,40);}
c = parent.getComponent(4);
if (c.isVisible()) {c.setBounds(insets.left+128,insets.top+136,72,40);}
c = parent.getComponent(5);
if (c.isVisible()) {c.setBounds(insets.left+248,insets.top+136,72,40);}
c = parent.getComponent(6);
if (c.isVisible()) {c.setBounds(insets.left+368,insets.top+136,72,40);}
c = parent.getComponent(7);
if (c.isVisible()) {c.setBounds(insets.left+488,insets.top+136,72,40);}
c = parent.getComponent(8);
if (c.isVisible()) {c.setBounds(insets.left+176,insets.top+48,56,40);}
}

Thank you. How do i amend this? I have defined value1though.Yes, you did - but after the call to addFocusListener(...). It needs to be before it.
BTW, you did the same thing with "value2.addFocusListener(this)" and "sum.setEditable(true)" on the next two lines. You're attempting to call a method on an object that doesn't exist yet (i.e., you haven't called new yet).

What is a process code in ale idoc

what is a process code in ale idoc,what is the purpose of Process code.

Hi,
     Let me tell some scenario then u would be able to understand what a process code is-------
In ALE ie, the data requested system is receiver and the data already presented system is sender ie, from where we are having the data,
here in sender side----
       we need a program to tranfer required data into idoc--( idoc is just a data container )    in sender side this program logic is in a function module it is configured in we41.
         ie this will transfer the data from database to idoc----in sender side it is a process code
and in receiver side after receiving the data we have to post it in database again program needed it is also ie the required code is also in function module it is configured in we42
it is about receiver side f.m or simply process code
okkkkkkkkkkkk

JavaScript: calling Java system code message...

When I try and call an applet function from Javascript, I get the following message in the output window:
JavaScript: calling Java system code
JavaScript: default security policy = file://
... and the method isn't called.
Can someone tell me what I need to do please?

Research pointers:
http://devedge.netscape.com/library/manuals/2000/javascript/1.5/guide/lc.html#1014290
http://java.sun.com/j2se/1.4.1/docs/guide/plugin/developer_guide/js_java.html

What is the function code of create new session?

what is the function code of create new session?
thanks...

Hi
Please put a "/n" (to open a new session after killing the current session)
or "/o" (to open a new session without killing the current session)
or "/i" (to end the current session) before the below T Codes as per your requirement...
For more Tcodes check the following
=>smartforms - Smartforms (SAP Form Builder to Create and Adjust Forms)
=>cmod - Enhancements, User Exits (Project Tool to coordinate changes into projects for the purpose of activating all user exits for a particular project)
=>sale - ALE Customizing
=>bale - Distribution Administration (ALE)
=>wedi - IDOC Type and EDI Basis
=>shdb - BDC (Transaction Recorder)
=>lsmw - LSMW
=>bapi - BAPI
=>spau - Display Modified DE Objects
=>spdd - Display Modified DDIC Objects
=>sara - central idoc archiving
=>stms - Transport Management System
=>wedi - IDOC Type and EDI Basis (IDOC Configuration)
=>bd21 - Analyze change pointers - create IDOC from change pointer
=>bd10 - Send Material Master
=>bd12 - Send Customer Master
=>bd14 - Send Vendor Master
=>bd50 - Activate Change Pointer for Message Type
=>bd55 - Conversion rule user exit (Link conversion rule user exit to the different system \ partner combinations)
=>bd54 - Maintain Logical Systems
=>bd71 - Distribute Customer Model
=>bd87 - Process Inbound IDOCs
=>bd88 - Process Outbound IDOCs
=>bdm2 - Cross-system IDOC Reporting
=>bdm7 - ALE Audit - statistical analyses
=>bdm8 - ALE Audit - sending confirmations
=>bd61 - Activate Change Pointer generally
=>bmv0 - Direct Input Data Transfer Administration
=>rz04 - Operation Mode
=>rz12 - RFC Server Group Maintenance
=>sar3 - Archiving object customizing
=>s001 - SAPoffice Inbox
=>s010 - Standards Texts (SAP Script)
=>se01 - Transport Organizer (Extended View - Performing and managing the transport of development object across different systems)
=>se09 - Transport (Workbench) Organizer (Controlling and keeping track of Development work and Development Objects)
=>se24 - Class Builder (BAPI)
=>se30 - Runtime Analysis
=>se36 - LDB
=>se37 - Function Builder
=>se38 - ABAP Editor (to modify ABAP programs)
=>se39 - Split-Screen-Editor
=>se11 - ABAP Dictionary
=>se16 - Data Browser (Table contents display)
=>se41 - Menu Painter
=>se51 - Screen Painter
=>se71 - SAPScript Forms
=>se73 - SAPScript Font Maintenance
=>se75 - Graphic Objects and Graphic IDs Sapscript Settings
=>se78 - Administration of Form Graphics (Import Graphics into SAP System)
=>se80 - Object Navigator
=>se84 - ABAP Repository Information (search for SAP objects)
=>se91 - Message Maintenance
=>se93 - Maintain T codes
=>su01 - User Maintenance (Security)
=>su02 - Maintain Authorization Profiles
=>su03 - Maintain Authorizations
=>slg1 - Evaluate Application Log
=>sm12 - Lock Entries
=>sm21 - System Logs
=>sm36 - Background Job Scheduling
=>sm37 - Background Job Monitoring (display batch jobs)
=>sm31 - Table Maintenance
=>sm30 - Calling View Maintenance
=>sm35 - Batch Input Monitoring (Error Logs)
=>sm50 - Process Overview
=>sm58 - Transactional RFC Monitoring
=>sm59 - Maintain RFC Destinations (Define RFC Configuration)
=>snro - Number Range Objects (for IDOCs)
=>scc4 - Client Overview (Create, Quick Delete, Modify)
=>spro - Customizing, Execute Project
=>sp01 - Spool Administration
=>sq01 - Maintain SAP Queries
=>st02 - Buffer Analysis (Status Overview)
=>st03 - Workflow Analysis
=>st05 - Performance SQL trace (Tracking the Database calls from the System Transaction and Programs)
=>st22 - ABAP Dump Analysis, check logical runtime errors
=>/h - ABAP Debugger
=>we02 - Display IDOC
=>we05 - IDOC lists
=>we07 - IDOC statistics
=>we12 - Inbound processing of outbound file - convert outbound to inbound file
=>we14 - Process (dispatch) IDOCs through Port - RSEOUT00
=>we15 - Outbound IDOC from NAST - message control
=>we16 - Inbound File
=>we18 - Generate status file
=>we19 - Test tool
=>we20 - Add new Message Type to Partner Profile
=>we21 - Maintain Port Definition
=>we30 - IDOC Type development
=>we31 - IDOC Segment development
=>we41 - Process Code Outbound
=>we42 - Process Code Inbound
=>we46 - IDoc Administration
=>we47 - Status Code Maintenance
=>we57 - Assign function module to logical message and IDoc type
=>we63 - IDOC Type for Parser Output
=>we82 - Assign IDOC to Message Type
=>we60 - IDOC Documentation - IDOC Types
=>we61 - IDOC Documentation - IDOC Record Types
=>we81 - Create new IDOC Message Types
=>we82 - Assign IDOC to Message Type
=>pa20 - Display HR Master Data
=>pa30 - Maintain HR Master Data
=>bd59 - Create and assign Filter Object Type for Message Type
=>bd64 - Maintenance of ALE or any other Distribution Model
=>db02 - Storage Management and Database Performance
=>db14 - Database monitor
=>se18 - BADI definitions
=>se19 - BADI implementations
=>fd03 - Accounts Receivable Master Data (Display Customer in Accounting)
=>me22 - Change Purchase Order
=>me21 - Create Purchase Order
=>me51 - Create Purchase Requisition
Official source of SAP T Codes -Go to se11 or se16 and view table entries for
TSTC and TSTCT. This will give you the Transaction List.
Reward all helpfull answers
Regards
Pavan

What is the hash code?

What is the hash code of an object? What does hash code mean?

http://java.sun.com/j2se/1.4.2/docs/api/java/lang/Obje
ct.html#hashCode()also http://en.wikipedia.org/wiki/Hash_code
what the hashcode isn't, though, is an identifier for an object, unique or otherwise. don't make that mistake!
"Database Systems" by Connolly-Begg has a good section on hash codes and their uses, if memory serves me well

What is a function Code?

Can anybody tell me What is a Function Code while creating Application tool bar with SET PF-STATUS?
How many function codes are there?
What are they?
if I want to associate a new functionality with a new ICON....can I add custom fuction code or there are only SAP function codes available.....?

Hi
Function code is the CODE assigned to a particular through which the SAP recognises its action.
It is something like OK code or Sy-UCOMM.
see the doc of OK CODE
In your ABAP programs, you should work with the OK_CODE field instead of SY-UCOMM. There are two reasons for this: Firstly, the ABAP program has full control over fields declared within it, and secondly, you should never change the value of an ABAP system field. However, you should also always initialize the OK_CODE field in an ABAP program for the following reason:
In the same way that the OK_CODE field in the ABAP program and the system field SY-UCOMM receive the contents of the corresponding screen fields in the PAI event, their contents are also assigned to the OK_CODE screen field and system field SYST-UCOMM in the PBO event. Therefore, you must clear the OK_CODE field in the ABAP program to ensure that the function code of a screen is not already filled in the PBO event with an unwanted value. This is particularly important when the next PAI event can be triggered with an empty function code (for example, using ENTER). Empty function codes do not affect SY-UCOMM or the OK_CODE field, and consequently, the old field contents are transported.
In your application programs, the first step in PAI processing should be to save the function code in an auxiliary variable and then initialize the OK_CODE field. You can then read the function code from the auxiliary variable (for example, using a CASE structure), and control the program flow from there.
The OK_CODE field can have a different name on each screen. However, common practice is to use the same name for the field on each screen of an ABAP program. You then only need one field in the ABAP program, with the same name, into which the function code is placed, and from which you can read it.
Refer the link:
http://help.sap.com/saphelp_47x200/helpdata/en/d1/801e61454211d189710000e8322d00/frameset.htm
regards
Anji

What is a UNSPSC Code?

When creating a device record I see a field for a UNSPSC-Code. What is a UNSPSC-Code?

Hi Michael,
UNSPSC (United Nations Standard Products and Service Code) is an international coding system that helps to classify products and services. It has over 45,000 terms for classifying products and services. UNSPSC numbers can be used for classifying devices (SG.inventory) according to the international standard code.
For more information about how to use UNSPSC in ServiceGrid visit:
http://docwiki.cisco.com/wiki/ServiceGrid_Article_-_Common_Content#Product_Classes_.28UNSPSC.29
Find more information about UNSPSC on Wikepdia: http://en.wikipedia.org/wiki/UNSPSC
Regards,
Alex

What r the trns code for maintenance view, help view and projection view

hi all
what r the transaction code for maintenance view, help view and projection view
can anyone tell me how to create maitenance, help and projection view.
with an example
regs
hari

What is the Different Types and Usage of Views
The followings are different types of views:
- Database View (SE11)
Database views are implement an inner join, that is, only records of the primary table (selected via the join operation) for which the corresponding records of the secondary tables also exist are fetched. Inconsistencies between primary and secondary table could, therefore, lead to a reduced selection set.
In database views, the join conditions can be formulated using equality relationships between any base fields. In the other types of view, they must be taken from existing foreign keys. That is, tables can only be collected in a maintenance or help view if they are linked to one another via foreign keys.
- Help View ( SE54)
Help views are used to output additional information when the online help system is called.
When the F4 button is pressed for a screen field, a check is first made on whether a matchcode is defined for this field. If this is not the case, the help view is displayed in which the check table of the field is the primary table. Thus, for each table no more than one help view can be created, that is, a table can only be primary table in at most one help view.
- Projection View (SE11)
Projection views are used to suppress or mask certain fields in a table (projection), thus minimizing the number of interfaces. This means that only the data that is actually required is exchanged when the database is accessed.
A projection view can draw upon only one table. Selection conditions cannot be specified for projection views.
- Maintenance View ( SE54 )
Maintenance views enable a business-oriented approach to looking at data, while at the same time, making it possible to maintain the data involved. Data from several tables can be summarized in a maintenance view and maintained collectively via this view. That is, the data is entered via the view and then distributed to the underlying tables by the system.
reward points if it is usefull...
Girish

UOM RL (REEL) what is the ISO code in SRM ?

Hi All
What is the ISO code for RL UOM ?in SRM system.
HOW DO WE ASSIGN RL to ISO CODE in SRM?
thanks
Muthu

Thanks Teja
Currently i dont have this ISO code RL in SRM but i do have in ecc
t006i = t006i must be same in ECC and SRM ?
but my requirement is below
in mm03
MM 1234 EA as Basic UOM and ORDER unit as RL .(1EA = 1RL)
i do have a contract for RL. no issues so far.
POs created with RL too in ECC classic.
since i do have one contract for one material as sos , always sc comes with RL and PO created. no issues.
while revising the GOA i do have issues
like below error.
just go to GOA change mode and check i get below error.
"conversion factors are allowed only in case of differing unit of measure"
br
Muhtu

HT201250 what does reported "error code 6584" mean ?

What does reported "error code 6584" mean ? when trying to get into my time machine back up.

First, I suggest you make another full backup to a locally-attached external hard drive. You should do that anyway. One backup isn't enough to be safe, and backing up over a network is less reliable than backing up locally. Then try each of the following steps that you haven't already taken.
1. Restart the backup device. You can do that by disconnecting and reconnecting the power cord.
2. Open the Time Machine pane in System Preferences and check that the device is selected as a destination. If it isn't, select it and try again.
3. Hold down the option key and select Verify Backups from the TM menu in the menu bar (not the Dock icon.) This operation may take a long time. If the menu-bar icon (a clock that runs backwards) isn't showing, check Show Time Machine in menu bar in the preferences.
4. Erase the backup device. With a Time Capsule, you do that from within the AirPort Utility application; see its built-in help for details. All backups on the device will be lost, so don't do this until you've backed up to another device. After erasing, select the device again as a backup destination in the TM preference pane. The first backup should be made over a wired connection, if possible.

What is sfp transaction code

what is sfp transaction code . and in which version this code is available.
pls tell me how i can work on this tcode.

SFP - ADOBE FORM
Component documentation PDF-Based Print Forms Locate the document in its SAP Library structure
Purpose
PDF-based print forms are part of the SAP Interactive Forms by Adobe solution and are used for printing in SAP systems. As well as standard output on printers, and the option of archiving documents, you can also use your application to send a PDF to the Structure linkBusiness Communication Services (BCS). Here, you have the option of faxing or e-mailing your documents.
The following gives you an overview of how a PDF-based print form is structured, and also tells you how to create a PDF-based print form in the development environment of the ABAP Workbench. The integrated Adobe LiveCycle Designeru2122 software supports you when you do this. This software must be installed on your front end before you can create a layout. To see a print preview of your form, you first need to install Adobe Reader or a complete version of Adobe Acrobat.
This documentation does not discuss how documents are printed and controlled on printers. Instead, it discusses the whole process up to when a file is sent to output management functions, such as the spool system in SAP systems. Note that, for printing and previewing PDF-based forms, you need to use a PCL, Postscript, or ZPL printer and an appropriate device type (such as POST2, HPLJ4, HP9500, PDF1, AZPL203, or AZPL300). You cannot use a printer with the device type SAPWIN/SWIN. More information is available in the Structure linkSAP Printing Guide (BC-CCM-PRN), under Structure linkPrinting PDF-Based Forms.
Integration
An activated PDF-based print form corresponds to a callable function module in the SAP system. The complete logic of the form is represented by this function module. When a form is printed, it is called by an application program, which collects the relevant application data. The application program uses the function module interface to send the data. Therefore, the data collection process is split from the logic of the form. This means that you only need to adjust the form when you modify the logic or layout.
There are several ways of creating interactive forms. For more information, see Interactive Forms.
Features
To develop a PDF-based print form, you use Form Builder, integrated with ABAP Workbench. This tool enables you to create a complete form description, even if you do not have extensive programming skills. The tool supports you in the following tasks:
●      Creating layouts
Here, you use the Adobe LiveCycle Designer to design pages or create the layout.
●      Specifying the data used in the form
In the form context, you specify which data, tables, texts, and graphics are sent to the form.
●      Structure linkMigration of Smart Forms
By migrating Smart Forms, you can reuse them as PDF-based print forms. You can find the Smart Form migration tool in transaction SMARTFORMS.
Note
Smart Forms are still supported; you can continue to forms created in Smart Forms without making any changes.
●      Importing existing PDF files or forms
This tool is integrated into Adobe LiveCycle Designer and enables you to use your own templates for your form.
●      Scripting
Adobe LiveCycle Designer uses the script languages JavaScript and FormCalc. FormCalc is a simple Adobe script language for typical form calculations, including mathematical and logical functions, and date and character string functions. For more information about FormCalc, and a FormCalc language reference, see the online help of Adobe LiveCycle Designer.
Note
To achieve the best possible performance when processing forms, use as little scripting as possible in the form itself. If possible, perform all calculations and data analysis in the application program, before the form is called.
●      Printing and archiving the PDF-based print form:
You can use output parameters to specify print and archive settings, and so adapt the output to your requirements. These parameters are not viewed in Form Builder. Instead, you control them with function modules that you integrate in your application program.
Restrictions
Note that local print versions may differ from print versions produced using spool requests in the SAP system. You can print out parts of PDF forms (such as selected pages) as local print versions only, using Adobe Acrobat or Adobe Reader. Information about further restrictions is available in SAP Note 1009567.

I tried to buy an app and itunes keeps asking for a security code. What is a security code? I do not have one. I have a password.

I tried to buy an app and itunes keeps asking for a security code. What is a security code? I only have a password! And ID

Are you using a credit card?
http://store.apple.com/au/help/payments#creditus
Security codes
The credit card security code is a unique three or four digit number printed on the front (American Express) or back (Visa/MasterCard) of your card.

What release level of code do you get when you download a disk image (ISO/IMG) of a click-to-run Office 2013 product?

I’ve asked a similar question to this on an Office Community Forum but nobody knows the answer. So
I was hoping that an IT professional responsible for installing and deploying Office 2013 might know.
If you download an installation disk image (ISO/IMG) of a click-to-run Office 2013 product from office.microsoft.com/myaccount (Account Options:
Install from a disc > I want to burn a disc), what release level of code do you get?
Now that Service Pack 1 is available, do you get a disk image with Service Pack 1 incorporated?
Or do you still get the RTM (Release to Manufacturing) level of code?

Diane, thank you for the reply.
I was hoping that someone who has downloaded a disk image since SP1 became available would be able to confirm that for a fact.
I have just found a good description of Click-to-Run on Technet that I didn't know existed. The link is: http://technet.microsoft.com/en-us/library/jj219427(v=office.15)
The article states:
"Click-to-Run products that you download and install from Microsoft are up-to-date from the start. You won’t have to download and apply any updates or service packs immediately after you install the Office product."
This statement is probably true if you click the Install button on office.microsoft.com/myaccount and install "in real-time" over the Internet. However, I know for a fact that it is not true if you order a backup disk (Account
Options: Install from a disc > I want to purchase a disc). All you get is RTM level code (15.0.4420.1017).
So I still feel uneasy about what release level you get if you download a disk image. I don't want to download what might be the better part of 1GB of code over the Internet only to discover it is back level.
Addendum (6 April 2014): I decided to perform an experiment. I looked at the size of the data on my backup disk which contains RTM level code. It is 2.04GB. I then went to office.microsoft.com/myaccount and clicked to download a disk
image of my Office 2013 product. The pop-up window that asks me whether I want to Run or Save the file informed me that the size of the file is 2.04GB!!! I cancelled the download. I strongly suspect that, if I had continued with the
download, I would have received the same RTM level code I already have dating back to October 2012. I think this is awful customer service. To some extent, I can understand the logistical problems of replacing backup disks lying in warehouses
waiting to be shipped. But I cannot understand why disk images on download servers cannot be refreshed quickly.

What is a system code ?

Similar Messages

Maybe you are looking for