What is Context and queue?

Q.1What is context and queue in graphical mapping?
Q.2What is the difference between context and queue in graphical mapping and how these concepts are useful in mapping?

Hi,
Context Change
Message mapping works internally by using queues
If no further elements are imported at a particular hierarchy level, a Context Change is inserted in the queue
Use node functions to handle changes in the message hierarchy.
Context changes have impact on:
User-Defined Functions
Breaking and inserting of hierarchy levels Manipulation of queues ant contexts
Explicit context selection on source elements and nodes
Using node functions
removeContexts: deletes all context changes of a queue
SplitByValue: insert additional context changes in a queue
Check this link for all details.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/be05e290-0201-0010-e997-b6e55f9548dd
A tool to display queues:
-Upload or create source xmldocument in test mode
- Right-click on box representing element or function
- Select Show queue
Also check out this link
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/be05e290-0201-0010-e997-b6e55f9548dd
Hope this will help you.
Regards
Aashish Sinha
PS : reward points if helpful

Similar Messages

Difference between Context and Queue in UDF

hi,
i am trying to write udf but i have doubt when do i select Contect and when do i select Queue as my udf ? How do we decide which one i select ?
Thanks & Regards
Naveen

when u go 4 advanced udf functionalites u need this. for simple udf not req to play with queue nor context. the input when using a context or queue will be an array of strings but in simple udf's it is just a single string that u will be accessing. u can also check here:
http://help.sap.com/saphelp_nw2004s/helpdata/en/40/7b8e40496f6f1de10000000a1550b0/content.htm

Value and context and queue diff

Hi people
In UDF editor cache, what is the use and diff between value and context queue radio buttons
Thanks
Shekar

Refer
http://help.sap.com/saphelp_nw04/helpdata/en/22/e127f28b572243b4324879c6bf05a0/content.htm
Value - returns string..
Context/Queue - returns array of values

Contexts and queues problem

Hello Sdn
I am stuck with an issue.
I have a queue udf ,it takes in value and while placing in target ,it is placing the values in target segment.
eg :
Current output:
PO1
MSG
10
MSG
20
MSG
30
MSG
40
Required output
PO1
MSG
10
MSG
20
PO1
MSG
30
MSG
40
The mapping is : Source-> QUEUE UDF-> Target
IS this a context issue or something needs to be changed in the udf.
Thanks

HI
Change the context of PO1 and MSG to PO1 parent node. and try again.
Right click on each node and use display queue this will show you after changing the context what's changing. Check like this
Thanks
Gaurav

What is required in the HOST and QUEUE field when ...

Hi
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
i could really use some help.
thanks in advanced.

sky00ber wrote:
Hi,
What is required in the HOST and QUEUE field when setting a WIFI printer?
When setting up my printer, i fill the options identical to what follows:
PRINTER: SAMSUNG HOME
DRIVER:    GENERAL
BEARER: LPR <-----------------------------( NOT SURE IF IT IS THE CORRECT OPTION TO SELECT )
The following fields appear once LPR is selected:
ACCES POINT : HOME
HOST:              WHAT COMES HERE?
USER:              SKY00BER
QUEUE:            WHAT COMES HERE?
ORIENTATION: PORTRAIT
PAPER SIZE: A4
if it helps, my printer is SAMSUNG CLX-3175FW. It is Wifi Enable and is connected to my HOME acces point.
please do correct me if there has to be changes to the BEARER or anything else.
HELP URGENTLY NEEDED!
I'm not sure but I give it a try.Turn your security(WPA/WEP) and Firewall temporarely off. HOST is the IP address of the printer. QUEUE can be YES or a specific amount of prints, like 1,2,3......
If I look at the manual of your printer I see that you can find the IP and MAC addresses in the Network Configuration Report.I don't know what the USER is doing there because if there is a user then there must be a password.
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Diff btw queue,context and xpath

plzzz provide me the links for diff btw queue,context and xpath....i have searched the sdn but didnt find find any information...!!!
and also please provide me u r usefull ideas
thnx SDNers

Hi ,
Have a look at these links for queue and context -
1. /people/riyaz.sayyad/blog/2006/04/23/introduction-to-context-handling-in-message-mapping
2. http://wiki.sdn.sap.com/wiki/display/XI/Detailedlookintothesuppressed+nodes
3. /people/venkat.donela/blog/2005/06/09/introduction-to-queues-in-message-mapping
XPath is used to navigate through elements and attributes in an XML document. It can be used in content based Receiver determination. For details refer to these links -
1. http://www.w3schools.com/xpath/default.asp
2. http://en.wikipedia.org/wiki/XPath
3. /people/prasadbabu.nemalikanti3/blog/2006/09/20/receiver-determination-based-on-the-payload-of-input-dataextended-xpathcontext-object
Regards,
Sunil Chandra

Creating topics and queues programatically

Hi,
Here i my scenario.
1. I have created the required number of queues and topics using the SunOne MQ's imqcmd command.
2. I want to use the jndi apis to register the jndia names for these queues in the appserver. How do we do this?
3. How to make an entry in the server.xml file programatically?
Note:- i do no t want to use the asadmin-utility for this.
i want to use the standard api's available to do this task.
Pls help
regards
raghu

Hi Raghu,
You appear to have created various topics and queues
on a MQ broker via the imqcmd command (independent
of app server).
For JMS clients to access/use the above topics/queues,
JMS resources of type javax.jms.Topic and javax.jms.Queue
need to be created and exposed to app server's JNDI
context.
Running this command:
asadmin create-jms-resource ...
Creates a new jms-resource entry in server.xml and
the command:
asadmin reconfig ...
Creates the actual java object and introduces it into
app server's JNDI context. (A server restart does this too).
You mention that you want to do the above from your code.
I don't think it is possible to programatically add new
resources into server.xml. If there was a way, I wouldn't
recommend it be done from J2EE applications since JMS resource
management is an administrative task. Note that using
JNDI to bind an object from an application (I haven't tried it
in app server) may appear to work but this resource is not
persisted across restarts since it is not in server.xml.
Why do you want to do this ? Why does your application need to do
what asadmin already does today ?
Perhaps if I can better understand why you want to do this I can
help suggest other solutions.
regards,
-isa

When do VI and queue references become invalid?

Hi all,
I have a fairly complicated problem, so please bear with me.
1) I have a reentrant SubVI (let's call it VI "Assign") that has an input cluster of (VI ref, queue ref) (let's call the cluster type "Refs"). If the VI ref is invalid (first execution), the VI ref and queue ref are assigned values and are passed on as an output cluster of same type. (The VI does other things too, but for simplicity only this is important.)
2) The VI that calls VI "Assign" (let's call it VI "Store") is not reentrant and has a local variable of type "Refs" that is wired to the input and output of VI "Assign". This VI effectively stores the references. The references returned by VI "Assign" are always valid right after the call, but after the problem condition described below, they are invalid at the start of all calls before they are passed to VI "Assign".
3) VI "Store" is called by multiple non-reentrant VIs, so the local variables of VI "Assign" retain their values (Has been tested and verified to retain their values). The VI causing the problem in this case is a template VI of which multiple copies are launched (let's call it VI "Template").
The problem is that the moment an instance of VI "Template" is closed, the queue reference becomes invalid, although the actual variant value of the reference remains the same. The VI ref can become invalid or not, depending on small changes, but is always reproducible. I assume there must be some similarity between VI and queue refs. After spending some time researching, the Labview help states for the Open VI Ref component "If you do not close this reference, it closes automatically after the top-level VI associated with this function executes." In this case I assumed it means that the moment the reentrant VI "Assign" finishes, the references will get cleared ?? So I made a non-reentrant VI (let's call it VI "NR Assign") that only assigns values to the references and VI "Assign" now calls this VI (It effectively does what I described VI "Assign" does). I keep this VI alive by using it in a VI which never terminates and since it never terminates, the references should never become invalid. Anyone still following? This didn't solve the problem though. If I reproduce the same scenario using only one instance of the template VI, it works just fine. Furthermore, the VI and queue references are never closed, to aid analysis of the problem. Can anyone shine some light on what happens when a template VI terminates? Could this be the problem?
Unfortunately I cannot include the code.
Thank you whoever is able to make sense of this.
Christie

Christie wrote:
Hi all,
I have a fairly complicated problem, so please bear with me.
1) I have a reentrant SubVI (let's call it VI "Assign") that has an input cluster of (VI ref, queue ref) (let's call the cluster type "Refs"). If the VI ref is invalid (first execution), the VI ref and queue ref are assigned values and are passed on as an output cluster of same type. (The VI does other things too, but for simplicity only this is important.)
2) The VI that calls VI "Assign" (let's call it VI "Store") is not reentrant and has a local variable of type "Refs" that is wired to the input and output of VI "Assign". This VI effectively stores the references. The references returned by VI "Assign" are always valid right after the call, but after the problem condition described below, they are invalid at the start of all calls before they are passed to VI "Assign".
3) VI "Store" is called by multiple non-reentrant VIs, so the local variables of VI "Assign" retain their values (Has been tested and verified to retain their values). The VI causing the problem in this case is a template VI of which multiple copies are launched (let's call it VI "Template").
The problem is that the moment an instance of VI "Template" is closed, the queue reference becomes invalid, although the actual variant value of the reference remains the same. The VI ref can become invalid or not, depending on small changes, but is always reproducible. I assume there must be some similarity between VI and queue refs. After spending some time researching, the Labview help states for the Open VI Ref component "If you do not close this reference, it closes automatically after the top-level VI associated with this function executes." In this case I assumed it means that the moment the reentrant VI "Assign" finishes, the references will get cleared ?? So I made a non-reentrant VI (let's call it VI "NR Assign") that only assigns values to the references and VI "Assign" now calls this VI (It effectively does what I described VI "Assign" does). I keep this VI alive by using it in a VI which never terminates and since it never terminates, the references should never become invalid. Anyone still following? This didn't solve the problem though. If I reproduce the same scenario using only one instance of the template VI, it works just fine. Furthermore, the VI and queue references are never closed, to aid analysis of the problem. Can anyone shine some light on what happens when a template VI terminates? Could this be the problem?
Unfortunately I cannot include the code.
Thank you whoever is able to make sense of this.
Christie
All LabVIEW refnums do get deallocated automatically when the top-level VI in whose hierarchy the refnum was created goes idle (stops executing). You will have to make sure that the creation of a refnum is done inside a VI hierarchy that stays running for the entire time you want to use that refnum.
Rolf Kalbermatter
Message Edited by rolfk on 06-27-2007 11:52 AM
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

What do "w/" and "w/o" stand for in the following paragragh?

What do "w/" and "w/o" stand for in the following paragragh?
[root@fedora ~]#ps --help
********* simple selection ********* ********* selection by list *********
-A all processes -C by command name
-N negate selection -G by real group ID (supports names)
-a all w/ tty except session leaders -U by real user ID (supports names)
-d all except session leaders -g by session OR by effective group name
-e all processes -p by process ID
T all processes on this terminal -s processes in the sessions given
a all w/ tty, including other users -t by tty
g OBSOLETE -- DO NOT USE -u by effective user ID (supports names)
r only running processes U processes for specified users
x processes w/o controlling ttys t by tty
*********** output format ********** *********** long options ***********
-o,o user-defined -f full Group User pid cols --ppid
-j,j job control s signal group user sid rows --info
-O,O preloaded -o v virtual memory cumulative format --deselect
-l,l long u user-oriented sort tty forest version
-F extra full X registers heading no-heading --context
********* misc options *********
-V,V show version L list format codes f ASCII art forest
-m,m,-L,-T,H threads S children in sum -y change -l format
-M,Z security data c true command name -c scheduling class
-w,w wide output n numeric WCHAN,UID -H process hierarchy
[root@fedora ~]#

w/ = with
w/o = without
these abbreviations are in common usage in the English language and frequently encountered in legal and technical documents
When you run into strange abbreviations or acronyms, you could turn to the internet and check on http://acronyms.thefreedictionary.com/ for possible translations

Need help with XML response to refresh document with context and prompts

I've been working with the Restful api for a few weeks now and have been able to figure out most of what I need to automate testing of our reports. However, one task that I have not been able to figure out is how to refresh a document that contains both a context and two prompts for dates.
Here is what I have tried, and what the API responds with.
1) I queried the API for this document's parameters using the following call after logging in -
headers = {:accept=>'application/xml', :content_type=>'application/xml', :x_sap_logontoken=>@token}
url = "http://our.url.net:6405/biprws/raylight/v1/documents/12345/parameters"
RestClient.get(url, headers)
The response from the API is:
<parameters>
    <parameter dpId="DP0" type="context" optional="false">
        <id>0</id>
        <technicalName>cQuery 1</technicalName>
        <name>Select a context</name>
        <answer type="Text" constrained="true">
            <info cardinality="Single">
                <lov partial="false">
                    <values>
                        <value id="CTX_1">LOAN</value>
                        <value id="CTX_9">LOAN_APPLICATION</value>
                    </values>
                </lov>
                <values>
                    <value id="CTX_1">LOAN</value>
                    <value id="CTX_9">LOAN_APPLICATION</value>
                </values>
                <previous>
                    <value id="CTX_9">LOAN_APPLICATION</value>
                </previous>
            </info>
            <values>
                <value id="CTX_9">LOAN_APPLICATION</value>
            </values>
        </answer>
    </parameter>
</parameters>
2) This tells me I need to supply a context, so I then replace my RestClient.get call with a RestClient.put call with the following payload:
<parameters>
     <parameter>
            <id>0</id>
            <answer>
                  <values>
                        <value id=\"CTX_9\"/>
                  </values>
            </answer>
      </parameter>
</parameters>
3) This satisfies the context portion of the refresh. The API replies with the following response, telling me I need to answer two prompts -
<parameters>
     <parameter dpId=\"DP0\" type=\"prompt\" optional=\"false\">
          <id>1</id>
          <technicalName>psEnter value(s) for Start Date of Application Received Date</technicalName>
          <name>Enter value(s) for Start Date of Application Received Date</name>
           <answer type=\"DateTime\" constrained=\"false\">\
                <info cardinality=\"Single\"/>
           </answer>
     </parameter>
     <parameter dpId=\"DP0\" type=\"prompt\" optional=\"false\">
            <id>2</id>
            <technicalName>psEnter value for End Date of Application Received Date</technicalName>
            <name>Enter value for End Date of Application Received Date</name>\
            <answer type=\"DateTime\" constrained=\"false\">
                <info cardinality=\"Single\"/>
            </answer>
      </parameter>
</parameters>
4) Here is where I am having problems. I have tried all kinds of permutations of the below payload/response body. All I ever get from the API is a 400 - BadResponse error.
<parameters>
     <parameter>
          <id>0</id>
          <answer>
               <values>
                    <value id=\"CTX_9\"/>
               </values>
          </answer>
     </parameter>
</parameters>
<parameters>
     <parameter type=\"prompt\">
          <id > 1 </ id>
          <answer type=\"DateTime\">
               <values>
                    <value>2012-06-11T09:50:54.000-04:00</value>
               </values>
           </answer>
     </parameter>
     <parameter type=\"prompt\">
           <id > 2 </ id>
           <answer type=\"DateTime\">
                <values>
                     <value>2014-07-11T09:50:54.967-04:00</value>
                </values>
           </answer>
     </parameter>
</parameters>
I am not very good with XML and the terminology around it, and I haven't received much training around using the Restful API other than the SDK documentation. I have a feeling there is something very basic that Im missing here. What is the correct XML needed in the response body to properly refresh the document?

If you are more confortable with JSON, Raylight supports it as well.
Best regards,
Anthony

Can JMS topics and queues be clustered in a WLS 7.0 Cluster?

We are installing a weblogic 7.0 cluster with 1 admin server and 2 managed
          node servers. Two nodes have been clustered. We are at the point where we
          need to configure JMS. Has any one implemented JMS in WLS 7 clustered
          environment? What are the things to watch out when clustering JMS? Can JMS
          topics and queues be clustered?
          TIA for any helpful hints and comments.
          Regards


"Karim Ali" <[email protected]> wrote:
          >> Has any one implemented JMS in WLS 7 clustered
          >> environment?
          I'm currently working on a project with WLS 7 here at work, involving
          the implementation of BEA's JMS Cluster. So far, I really haven't had
          many hiccups.
          "Karim Ali" <[email protected]> wrote:
          >> What are the things to watch out when clustering JMS?
          At least in WLS 7, the biggest thing that stands out is the lack of
          automatic failover. Also, Message Paging -- make sure you configure
          paging high/low thresholds. Or, if you don't wish for it to occur but
          can't stop the server (very common these days with SLAs), set that
          byte/message high threshold to a very large number (correct me if I'm
          wrong, but I believe BEA recommends 2^63 -1).
          "Karim Ali" <[email protected]> wrote:
          >> Can JMS topics and queues be clustered?
          Well, since Topics and Queues are extensions of the
          javax.jms.Destination interface, the answer is: Yes!
          (SIDE NOTE: most people usually refer to them as a [JMS] "destination"
          -- it avoids a lot of conceptual baggage and plus, less typing!)
          You'll probably want to see this section of BEA's e-docs:
          http://edocs.bea.com/wls/docs70/adminguide/jms.html#config_distributed_destinations
          later,
          Brian J. Mitchell
          BEA Systems Administrator
          TRX
          Atlanta, GA
          email: [email protected]
          office: 404-327-7238
          mobile: 678-283-6530

Message Tracking and Queue Viewer access is denied - Exchange 2010

Hello,
I am experiencing Message Tracking and Queue viewer problems on my exchange server.
Message Tracking problem
When i run message tracking via EMC or powershell, i receive the following error;
Failed to connect to the Microsoft Exchange Transport Log Search server on computer "myserver.mydomain.com.br". Verify that a valid computer name was used and the Microsoft Exchange Transport Log Search service is started on the target computer. The
error message is: "Access is denied".
Exchange Transport Log Search service is confirmed running and have tried by restarting the service
Logon user is a member of Domain Admins, Enterprise Admins and Exchange Organization Administrators
Message Tracking Logs are generated properly
Queue Viewer problem
When i run Queue viewer, i receive the following error;
The Queue Viewer operation on computer "myserver.mydomain.com.br" has failed with exception. The error message is: Access is denied. It was running command.............................................................
My server information are as follow;
4 Exchange Server 2010 sp3
2 Mailbox Server and 2 Hub/CAS
Mail-flow is working fine
What should I grant permission for a group of users can have access to the Message Tracking ?
Regards,

Hi!
The group rule was created as described below. The error persists!
[PS] C:\Windows\system32>Get-RoleGroup "Exchange Access Message Tracking" | fl
RunspaceId                  : 4229f35d-90f1-4c4e-822d-387979921052
ManagedBy                   : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
RoleAssignments             : {Message Tracking-Exchange Access Message Tracking}
Roles                       : {Message Tracking}
DisplayName                 :
ExternalDirectoryObjectId   :
Members                     : {bancobmg.com.br/Users/Raphael Henrique Duarte Campos}
SamAccountName              : Exchange Access Message Tracking
Description                 :
RoleGroupType               : Standard
LinkedGroup                 :
Capabilities                : {}
LinkedPartnerGroupId        :
LinkedPartnerOrganizationId :
IsValid                     : True
ExchangeVersion             : 0.10 (14.0.100.0)
Name                        : Exchange Access Message Tracking
DistinguishedName           : CN=Exchange Access Message Tracking,OU=Microsoft Exchange Security Groups,OU=Global,DC=ba
                              ncobmg,DC=com,DC=br
Identity                    : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Trackin
                              g
Guid                        : 0957152d-2073-4f75-b40e-63f45eb20f67
ObjectCategory              : bancobmg.com.br/Configuration/Schema/Group
ObjectClass                 : {top, group}
WhenChanged                 : 06/02/2014 16:25:26
WhenCreated                 : 06/02/2014 16:25:26
WhenChangedUTC              : 06/02/2014 18:25:26
WhenCreatedUTC              : 06/02/2014 18:25:26
OrganizationId              :
OriginatingServer           : bmg190.bancobmg.com.br
[PS] C:\Windows\system32>Get-ManagementRoleAssignment "Message Tracking-Exchange Access Message Tracking" | fl
RunspaceId                   : 4229f35d-90f1-4c4e-822d-387979921052
User                         : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
                               ng
AssignmentMethod             : Direct
Identity                     : Message Tracking-Exchange Access Message Tracking
EffectiveUserName            : All Group Members
AssignmentChain              :
RoleAssigneeType             : RoleGroup
RoleAssignee                 : bancobmg.com.br/Global/Microsoft Exchange Security Groups/Exchange Access Message Tracki
                               ng
Role                         : Message Tracking
RoleAssignmentDelegationType : Regular
CustomRecipientWriteScope    :
CustomConfigWriteScope       :
RecipientReadScope           : Organization
ConfigReadScope              : OrganizationConfig
RecipientWriteScope          : Organization
ConfigWriteScope             : OrganizationConfig
Enabled                      : True
RoleAssigneeName             : Exchange Access Message Tracking
IsValid                      : True
ExchangeVersion              : 0.11 (14.0.550.0)
Name                         : Message Tracking-Exchange Access Message Tracking
DistinguishedName            : CN=Message Tracking-Exchange Access Message Tracking,CN=Role Assignments,CN=RBAC,CN=BANC
                               O BMG SA,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=bancobmg,DC=com,DC=br
Guid                         : c3768a00-3f36-4532-b586-a06842a85e24
ObjectCategory               : bancobmg.com.br/Configuration/Schema/ms-Exch-Role-Assignment
ObjectClass                  : {top, msExchRoleAssignment}
WhenChanged                  : 06/02/2014 16:25:26
WhenCreated                  : 06/02/2014 16:25:26
WhenChangedUTC               : 06/02/2014 18:25:26
WhenCreatedUTC               : 06/02/2014 18:25:26
OrganizationId               :
OriginatingServer            : bmg190.bancobmg.com.br
How can I identify if there is any setting to be done?
Thank you!

Oracle Streams 'ORA-25215: user_data type and queue type do not match'

I am trying replication between two databases (10.2.0.3) using Oracle Streams.
I have followed the instructions at http://www.oracle.com/technology/oramag/oracle/04-nov/o64streams.html
The main steps are:
1. Set up ARCHIVELOG mode.
2. Set up the Streams administrator.
3. Set initialization parameters.
4. Create a database link.
5. Set up source and destination queues.
6. Set up supplemental logging at the source database.
7. Configure the capture process at the source database.
8. Configure the propagation process.
9. Create the destination table.
10. Grant object privileges.
11. Set the instantiation system change number (SCN).
12. Configure the apply process at the destination database.
13. Start the capture and apply processes.
For step 5, I have used the 'set_up_queue' in the 'dbms_strems_adm package'. This procedure creates a queue table and an associated queue.
The problem is that, in the propagation process, I get this error:
'ORA-25215: user_data type and queue type do not match'
I have checked it, and the queue table and its associated queue are created as shown:
sys.dbms_aqadm.create_queue_table (
queue_table => 'CAPTURE_SFQTAB'
, queue_payload_type => 'SYS.ANYDATA'
, sort_list => ''
, COMMENT => ''
, multiple_consumers => TRUE
, message_grouping => DBMS_AQADM.TRANSACTIONAL
, storage_clause => 'TABLESPACE STREAMSTS LOGGING'
, compatible => '8.1'
, primary_instance => '0'
, secondary_instance => '0');
sys.dbms_aqadm.create_queue(
queue_name => 'CAPTURE_SFQ'
, queue_table => 'CAPTURE_SFQTAB'
, queue_type => sys.dbms_aqadm.NORMAL_QUEUE
, max_retries => '5'
, retry_delay => '0'
, retention_time => '0'
, COMMENT => '');
The capture process is 'capturing changes' but it seems that these changes cannot be enqueued into the capture queue because the data type is not correct.
As far as I know, 'sys.anydata' payload type and 'normal_queue' type are the right parameters to get a successful configuration.
I would be really grateful for any idea!

Hi
You need to run a VERIFY to make sure that the queues are compatible. At least on my 10.2.0.3/4 I need to do it.
DECLARE
rc BINARY_INTEGER;
BEGIN
DBMS_AQADM.VERIFY_QUEUE_TYPES(
src_queue_name => 'np_out_onlinex',
dest_queue_name => 'np_out_onlinex',
rc => rc, , destination => 'scnp.pfa.dk',
transformation => 'TransformDim2JMS_001x');
DBMS_OUTPUT.PUT_LINE('Compatible: '||rc);
If you dont have transformations and/or a remote destination - then delete those params.
Check the table: SYS.AQ$_MESSAGE_TYPES there you can see what are verified or not
regards
Mette

CCMS qRFC Monitoring: Missing Transactional and Queued RFC Monitoring Nodes

Hi ,
We are trying to create a Queued RFC monitoring for VERTEX Queued , but we are missing CCMS Monitor Templates,in monitor Communications -->Transactional RFC and Queued RFC in Dev and PROD ,but its present in QA System .
I have checked all system are at same level for support packs , kernel version .
I have refered following Notes - 441269,437187,455431, 485826
Can we create manually new one , but we are missing MTE class also ?
Can we create new monitoring template ?
We are running 4.6c with basis support pack level :
SAP_BASIS 46C 0054 SAPKB46C54
SAP_ABA 46C 0054 SAPKA46C54
Thanks
Hamendra

Hamendra,
Please make sure background dispatching is activated in your system. Go to tcode RZ21 and menu Technical Infrastructure --> Method execution --> Active background dispatching.
This should schedule a job called SAP_CCMS_MONI_BATCH_DP. This is the job that will run the function for building the ALE/EDI monitoring segment.
After scheduling the job check back in a few hours, if the ALE/EDI monitor is still not there try the following.
1. Go to tcode RZ21
2. In the topology section choose radio button "Segment overview" and click display
3. Go into change mode and delete the monitoring segments
This will force the system to recreate all the monitoring contexts.
Check back in a few hours and see if the monitor is working.
Tarkesh

Tuxedo - Ave. Len and #Queued in psadmin for PeopleSoft

Hi,
We set LDBAL = Y in psapsrv.ubx file and since then we started noticing queuing at Ave. Len and #Queued (see below).
>
pq
Prog Name Queue Name # Serve Wk Queued # Queued Ave. Len Machine
PSSAMSRV SAMQ 1 0 0 0.0 uqa031
JSL 00095.00200 1 0 0 0.0 uqa031
BBL 58048 1 0 0 0.0 uqa031
PSMONITORSRV MONITOR 1 0 0 0.0 uqa031
PSAPPSRV APPQ 15 350 7 4.1 uqa031
PSWATCHSRV WATCH 1 0 0 0.0 uqa031
JREPSVR 00094.00250 1 0 0 0.0 uqa031
PSQCKSRV QCKQ 1 0 0 0.0 uqa031
If we set LDBAL to 'N', we would n't see any queqing at both Ave. Len and #Queued.
we had a look at PeopleSoft servrices using 'psr' and there are number of application server processes which are in 'IDLE' status and this confirms that there is n't actually any queing.
The following Oracle PeopleSoft support document (831594.1) does not recommend enabling LDBAL in PeopleSoft domains as it is not supported.
The reason that we enabled LDBAL is that to monitor queqing at Ave. Len and #Queued as we have reduced number of application server processes from 20 to 15, as at any given time only around 10 PSAPPSRV processes are actively being used (from psr). Hence we reduced number of processes to free up some system resources (memory and swap) as the additonal resouces that we freed up can be used by the remaining 15 PSAPPSRV processes.
The #Queued and Ave. Len does not show up any values if we do not set LDBAL to 'Y. FYI, we are PeopleTools 8.50.07.
Any ideas and clarification would be appreciated.
Cheers
Raj

Can't tell much about the PeopleSoft configuration without the UBBCONFIG file. The tmunloadcf command should give one. What operating system is this for?
With reguards to queueing, the "ipcs -qa" command should give you an excellent snapshot of all of the IPC message queues and whether there are any messages on the queues. I prefer to use this approach with scripts to monitoring queueing.
With LDBAL=N, the "psr" command will show how many messages each server in the MSSQ set processed. The number of messages processes for each server in the MSSQ set is not equal but rather significantly unequal. The server with the fewest number of messages processed should have a significantly fewer number of messages processed than the other servers in the MSSQ set.
This URL may be useful: http://www.aurorainfo.com/wp1/index.htm
Harvey

What is Context and queue?

Similar Messages

Maybe you are looking for