What is control parameter for commmunication with the BW system

May I know what is control parameter that should be configured/assigned for commmunication with the BW system?

Hi,
goto transaction sbiw->general settings->maintain control parameters for data transfer.
On the fields you get a good help via F1.
regards
Siggi

Similar Messages

Incomplete control parameter for commmunication with the BW system

Hi expert's,
when i am loading my infopackage it's giving the error as follows
Error when updating Idocs in Source System
Diagnosis
Errors have been reported in Source System during IDoc update:
System response
There are IDocs with incorrect status.
Procedure
Check the IDocs in Source System . You can get here using the BW Monitor.
Removing errors:
How you remove the errors depends on the error message you receive.
for that i checked in idoc maintenance in OLTP
it's showing the following error
"Incomplete control parameter for commmunication with the BW system"
how to resolve this issue
Regards
Harikrishna N

Hi Imtiaz Karedia ,
thank you for your quick reply.
i checked with source system in RSA1. it's saying that source system connection is ok.
Regards
Harikrishna N

Incomplete control parameter for communication with the BW system

Hello SAP Experts!
We have R/3, which is ECC 6.0 and BI 7. While loading data to target, we are facing errors BD87.
Application Document not posted.
R3/030:Incomplete control parameter for communication with the BW sys.
Please, I invite your valuable inputs
Thanks & Regards
Vanitha

Seems like your source system is not active...
Try transaction RSA1 -> Source Systems -> select system and
click 'activate'.
Also read,
Note 398335 - Error message R3 030
Note 359412 - Error message R3030, control parameter incomplete
Regards
Juan

HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

Hey guys,
I found out an answer by myself...
The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

With all the games coming out for iMacs what Gaming Pad or Jotstick works with the Imac

With all the games coming out for iMacs what Gaming Pad or Jotstick works with the Imac

Now the bad news. In my "Print to Video" pop up, if
I select "Color Bars" , "Black", or any other option
and take out my bars and tone and slug from the
timeline, the print to video does not print anything
to tape except for a nice nothing blue. I don't
even get my actual timeline video printed to tape.
Jerry,
You are a genius! Man do I feel silly. So just for the benefit of others who might read this post, I did exactly as you said, and of course when I restarted FCP, I had to identify my Firewire NTSC setting for the drive. This time, instead of leaving my tapedrive offline, I left it on and immediately saw on my drive monitor the video coming off of my timeline.
Every thing works perfect. I now have a clean timeline with just the content I'm working on and don't have to worry about bars, slugs, post black. Just a few checkboxes and I'm ready to send my tapes off. Really nice feature.
Thanks!
iMac Mac OS X (10.4.6) 2GB DDR2, 500GB Disk, 20" LCD

"The software required for communicating with the iPod is not installed..."

I realize my explanation of my problem is long-winded, so if you want a shortened version, here it is:
I've followed all the instructions trying nearly everything, and no matter what I do, iTunes gives me the error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software." My G5 iPod (60GB) works on two other computers (both without any music on them), so I assume there something wrong with my computer and not the iPod itself.
Now for the long-winded story of the last eight hours of my life...
I just got the Generation-5 iPod Video (60GB) a today and I'm having problems already. I followed the instructions and installed the iPod software and then plugged in my iPod (iTunes has been on my computer for a while now). I was expecting iTunes to open after plugging in the iPod, but my device manager only detected and installed "a new device". I manually opened iTunes and got an error saying: "The software required for communicating with the iPod is not installed correctly. Please reinstall iTunes to install the iPod's software."
After re-installing the iPod software and iTunes, and restarting my computer countless times, I came looking for help here. I found this page, which seemed to outline my problem exactly. My computer recognizes the iPod as a drive, but iTunes won't have anything to do with it. I have all the symptoms outlined in the heading, so I hoped to solve my problem there. I followed the instructions step-by-step, and after the final restart, I open iTunes to get the same exact error message.
I decided to determine whether there was a problem with my iPod or if it was my computer. I plugged my iPod into my uncles's powerbook, and got to the point where I can name and configure my iPod. I expected it to work flawlessly on a Mac (which it did) but there is no way for me to continue using a Mac (after tomorrow) for my iPod. This formatted the iPod for a Mac, so I went to another (different from the original) Windows computer, clean of any iTunes and iPod software, and followed the instructions exactly as they're supposed to be followed. After the installations, I plugged in my iPod, and although iTunes didn't open, I was able to format back to Windows and name my iPod (a step in the right direction). I should note that my (anti-iPod) computer is a Windows XP Pro, and the working one is Windows XP Home Edition. This was all well and good, until I remembered there was no music on this computer. So my iPod is completely working there, but there isn't anything I can do with it.
Next, I came back here and browsed around the discussion boards, hoping to find somebody with a similar problem to mine. There seems to be alot of errors concerning iTunes not recognizing the iPod, but none of the solutions I tried worked for me, including changing the drive letter. I get the "iPod Service Error" while trying to restore to factory settings through iPod updater.
Of course, I could transfer all 32GB of music from one computer to another, but the second (working) computer isn't mine and I won't have access to it in a couple months. It would be most convenient if I could get my iPod working on my own computer. Any help would be appreciated, especially from somebody who has solved this problem or know how to solve this problem.
P.S.
Here are some other minor details that my be important, but I didn't feel they were worth including.
- My brother has his iPod mini set up on my computer, under a different user login. He gets the same error once in a while, but re-installing iTunes always solves the problem for him. I had him try solving my problem his way, but nothing worked for him either.
- My computer is an AMD Athlon 64 Processor 3200+, 512MB RAM with Windows XP Pro SP2 installed. My internal hard drive is partitioned, using the letters C, D and H (C being my system files, D used for recovery files and H for my applications and games). My E drive is used as a DVD/CD-ROM Drive, and drives F and G are reserved for virtual drives (none have been running during this entire ordeal). My external hard drive uses the letter I, and I manually set my iPod to use the letter J (I've never used 'J' for anything else before).
- Yes, I have downloaded and installed the latest versions of iTunes and the iPod software.
- I'm assuming there is a problem with my computer and not my iPod, since it worked on both other computers I tried. I'm hoping it's as simple as changing a registry file or cleaning out (yet another) temp directory.

Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
I think that's all that's required, but I also searched through the registry and deleted the following keys.
4. Other keys I deleted:
4.1 HKEYCLASSESROOT --> IPodManager.IPodManagerUI.1
4.2 HKEYLOCALMACHINE --> SOFTWARE --> Apple Computer Inc. --> iPod
I think that's all I deleted, but I'm not positive. I seached for instances of "ipod" using the Find... and Find Next functions under the Edit menu.
5. Exit out of the registry editor.
6. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark

SOLUTION to "Software required for communicating with the iPod is not insta

Folks, I can not take credit for this.....you should send your checks to MarkinMadison. I've included his post in it's entirety. For me, this was the Holy Grail !!
My only comment is make sure when you are in the registry that you hit the "apply" button to change and add things.
This probably won't solve everyone's problem but it clearly solved mine (and I tried all other "solutions"), as well as Mark's.
Apple: please find out who MarkinMadison is and either cut him a big check or offer him free Ipods for life.
"Solution to "Software required for communicating with the iPod is not installed"!
I battled this same problem for about 5 hours. Going through re-installations, the "5 R's", all these discussion boards. Nothing worked.
The problem is that iPodService was repeatedly crashing after minute or so. You can verify this by hitting Ctrl-Alt-Delete and noting that iPodService is missing from the process list (sort by image name), or by right-clicking on My Computer and selecting "Manage", then going to Services and checking out the IPodService service - if it gives you the option to "Start", then it's not running.
Here is what worked.
1. De-install iTunes and iPod (if you have the updater installed) completely by going to Start --> Control Panel --> Add/Remove Programs. Also delete the C:\Program Files\iTunes and c:\Progam Files\iPod\bin directories. (Don't worry, this doesn't affect your saved music files.)
2. Log in as an Administrator
3. Go into the registry (note this is dangerous - you should be careful) and remove the iPod entries that the uninstaller misses.
3.1 Go to Start menu --> Run.
3.2 Type in "regedit".
3.3 Go to HKEYCLASSESROOT --> IPodService.iPodManager.
There are two keys here, iPodManager and iPodManager.1. In my case, I did not have permission to view either of these. I think this is the root cause of the problem. I think the installer can't properly update these because it doesn't have permission. So you need to change the permissions:
3.4 Right-click on IPodService.IPodManager
3.4.1 Select "Permissions..." A warning will appear saying you don't have permission, but that you can change permissions.
3.4.2 On the window that launches, click on "Advanced..."
3.4.3 Click on the "Owner" tab.
3.4.4 Select a valid account (the one you're logged in under) under "Change Owner To".
3.4.5 Click the checkbox that says: "Replace owner on subcontainers and objects."
3.4.5 Hit "OK".
3.4.6 Back on the main Permissions window, hit Add and add the same account as a valid user.
3.4.6.1 Where it says "Enter the object names to select", type in the account name, e.g. "Smith".
3.4.7 Click on the "Allow" checkboxes for "Full Control" and "Read".
3.4.8 Hit "OK".
3.5 Repeat procedure for the "iPodManager.1" key.
3.6 Now right-click and delete both of these keys.
3.7 If you can't delete, you might need to open up the keys and repeat the procedure on the sub-keys.
4. Exit out of the registry editor.
5. Re-install iTunes. I re-installed iTunes and reconnected the iPod, and everything worked.
I want to repeat that editing the registry can completely mess up your computer if you modify the wrong things, so only do this if you're comfortable, and be extremely careful.
Hopefully this helps!
Apple support people: assuming this works, please add it to your solutions page, and feel free to reimburse me for spending half of Christmas figuring this out.
Mark"
Dimension 4600 Windows XP

I have also posted the same question, earlier today. I purchased two for my children and cannot get the iPod to communicate with the computer. I have the iTunes software on my system, but during the installation process I cannot click the NEXT button, once I plug the iPod cable in. The computer does not detect it. I have tried all 6 USB 2.0 ports. I even removed the Dell Jukebox and MusicMatch programs. I am not a computer savvy person - just a mom who wants to give these to my children for Christmas. This is the first "chat" site I have even registered on. I am so very frustrated. Hopefully, this can be resolved.

HT5731 How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

How can I download my TV episodes to my Macbook Pro. I bought them from my iPad2, and I looked for them with the same AppleID on iTunes Store and they wont download to my iTunes.

What country are you in ? Depending upon what country that you are in then you might be able to redownload them on your Mac's iTunes via the Purchased link under Quicklinks on the iTunes store homepage
If you're not in a country where TV programmes can be redownloaded then connect the iPad to your Mac's iTunes and use the File > Devices > Transfer Purchases to copy them over from your iPad

Firefox keeps prompting me for password with the popup

Firefox at my work computer keeps prompting for password with the popup message "The proxy moz-proxy://proxy:9119 is requesting a username and password. The site says: "moz-proxy://proxy:9119"" This happens too often,even If i provide the username and password I get the next popup with same message.
Its very annoying, I am not finding web better because of this, I goggled and figured about the config settings of - network.automatic-ntlm-auth.allow-proxies and the other one not working.
I guess I am missing the PAC URL or something which I remember like solved the problem sometime back but not in same domain though.
Can someone help ?
Can the good community help ?

Quitting Calendar Agent is not working for me. I still get the following errors.
About 50 of these: 8/13/12 10:19:28.210 AM CalendarAgent[12480]: Unexpected EOF, returning last token as fallback
Then about 10 of these:
8/13/12 10:19:31.193 AM CalendarAgent[12480]: [com.apple.calendar.store.log.caldav.queue] [Account refresh failed with error: Error Domain=CoreDAVHTTPStatusErrorDomain Code=401 "The operation couldn’t be completed. (CoreDAVHTTPStatusErrorDomain error 401.)" UserInfo=0x7fb603b9d990 {AccountName=, CalDAVErrFromRefresh=YES, CoreDAVHTTPHeaders=<CFBasicHash 0x7fb603f5a4b0 [0x7fff79a05190]>{type = immutable dict, count = 10,
entries =>
    0 : Case Insensitive Key: X-Content-Type-Options = <CFString 0x7fb6038d0650 [0x7fff79a05190]>{contents = "nosniff"}
    1 : Case Insensitive Key: Content-Type = <CFString 0x7fb603bd3930 [0x7fff79a05190]>{contents = "text/html; charset=UTF-8"}
    2 : Case Insensitive Key: Server = <CFString 0x7fb603b1c400 [0x7fff79a05190]>{contents = "GSE"}
    3 : Case Insensitive Key: Transfer-Encoding = <CFString 0x7fff792226b8 [0x7fff79a05190]>{contents = "Identity"}
    6 : Case Insensitive Key: Date = <CFString 0x7fb603bf6300 [0x7fff79a05190]>{contents = "Mon, 13 Aug 2012 14:19:31 GMT"}
    7 : Case Insensitive Key: X-Frame-Options = <CFString 0x7fb603869680 [0x7fff79a05190]>{contents = "SAMEORIGIN"}
    8 : Case Insensitive Key: X-XSS-Protection = <CFString 0x7fb603b01740 [0x7fff79a05190]>{contents = "1; mode=block"}
    9 : Case Insensitive Key: Www-Authenticate = <CFString 0x7fb603bcf200 [0x7fff79a05190]>{contents = "BASIC realm="Google CalDAV""}
    11 : Case Insensitive Key: Cache-Control = <CFString 0x7fb603b08d50 [0x7fff79a05190]>{contents = "private, max-age=0"}
    12 : Case Insensitive Key: Expires = <CFString 0x7fb603bf8a20 [0x7fff79a05190]>{contents = "Mon, 13 Aug 2012 14:19:31 GMT"}

Create a Navigational Hierarchy for filtering with the Table API

Hello,
I've built a WAD report acourding to the how to document: "Create a Navigational Hierarchy for filtering with the Table API".
It works great but i dont know How to make the hirarchey to show the key and the text.
Please Advice.
David

Hi Kenneth,
please have a look in the source of the executed Web Application. What is inside of the <div> with the id filter?
You should also find a td tag with id hier_xyz with xyz the filter inside of the <div>-Tag with id filter.
Also check whether you have a javascript error.
Have a look on the Javascript function set_style. Perhaps you can paste it here, than I can have a look.
Heike

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I plug my computer into my stereo and use the remote app on my iPhone to control it. How can I control my wires iPad with the remote app on my iphone when it is plugged into the stereo? they are different iTunes accounts.

I think this is probably a sign that your network could be better than it is.
Intermittent problems are often a result of interference. Interference can be caused by other networks in the neighbourhood or from household electrical items.
You can download and install iStumbler (NetStumbler for windows users) to help you see which channels are used by neighbouring networks so that you can avoid them, but iStumbler will not see household items.
Refer to your router manual for instructions on changing your wifi channel or adjusting your multicast rate.
There are other types of problems that can affect networks, but this is by far the most common, hence worth mentioning first.

My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support

My Iphone4 Home button sometimes work nicely and sometimes it stop working. India Apple care says they cant give me even paid support because i bought phone from Australia. i don't know what to do. i m disappointed with the product and service support

When you buy an iPhone in the U.S. it's locked to that country with the carrier you bought it for.
If you bought the device unlocked in the U.S. it's unlocked, you can use it on any carrier. Even one's outside the country.
If you want to do a repair on a device you bought in the U.S. and your using it in another country, you must send it back to the U.S. Why? That's where you bought it from.
AppleCare Protection Plans and AppleCare Limited Warranties are registered to your hardware.
Your hardware is your iPhone.
Wherever hardware that was bought then that's the country it was designed to be used in and that's where it was manufactured.
Apple is very localized - if you call U.S. tech support, you'll speak to somone in your country.
So, what does all this mean?
In order to do a repair, you need to send it back to the country you got it from.
And we're all customers like you. We understand that you're upset, but Apple isn't gonna bend the rules to one individual.
Policy is policy. Get over it.

What actions should be taken while working with the quality system

Hi all,
The development phase has been completed, I would like to know what are the steps we need to follow when we are working with the quality system.
I have some doubts regarding this could any one give the inputs please.
1. Where should we create any Roles and Authorizations.Dev/QA/Prd
2. Where should we craete process Chains. Dev/QA/Prd.
3. Can I transport the queries without using Bex transport. What will happen If i dont use the Bex transport.
Thanks in Advance
Regards
Kumar

Hi Kumar,
your BW quality system will be connected to your R/3 Production system from where you'll extract the real time data and do testing which includes estimation of downtime in case of filling up of the set up tables and so on...
the most general procedure is to create the Roles and Authorizations in teh development system and then transport it across to production through your quality system...
Process chains you afford to create it directly in your production system itself... that's no big deal...
And of course, you'll have to transport the queries only using the BEx transport.. there's no other go for this as its the standard procedure given by SAP...
Hope it helps..
Regards
Manick

How to Control authorization for users with certain status for level 2 WBS Element

Dear All,
Is there any standard way or enhancement available to control authorization for users with certain status for WBS Element i.e. for example
Pre-requisite:
There is only 2 level of project i.e.
Lev_ WBSE_______Description
1___ 7-14.E_______summay outage controller
2___ 7-14.E.2310__ Plant/unit # 2310
2___ 7-14.E.2310__ Plant/unit # 2220
Project Controller (authorization role assigned "Z_PS_OP7_OTGCON_C") have all project level authorization
Plant/Unit Controller (authorization role assigned "Z_PS_OP7_PLNTOTG_C_2310") have only level 2 authorization with enhancement that we did in system by Z table.
User ID_ Plant #
123345_ 2310
122455_ 2220
Issue:
After System Status released and User Status approved the WBS basic date for Plant/Units should be restricted from updating/changing by Plant/Unit Controller level and only project controller should have this authority.
Solution required:
Can any one tell how to control this scenario either by standard or enhancement available to control authorization
BR
Saqib Usman

Hi,
Did you explore SAP Enhancement CNEX0002 Using Transaction CMOD?
Thank you and regards,
Varshal Kachole
The SCN Rules of Engagement

I connected my iPod to my PC and got a message 'The software for communicating with the iPod is not installed correctly.

I connected my iPod to my PC and received a message box that read "The software for communicating with the iPod is not installed correctly. Please reinstall the iPod's software." Not sure what I need to do. I did uninstall all of my iTunes and related software components and then reinstalled the latest version of iTunes but that did not correct the problem and I now can't access my iTunes library at all.

Another thing is that iPod Touch shows up fine...I've tried every other ipod from older 4gig Nanos to 120gb Classics and none of them work..this is really annoying!

What is control parameter for commmunication with the BW system

Similar Messages

Maybe you are looking for