What is involved in conversion from 8i and 9i or in general .....

Hi,
I would like to know what is the process involved in conversion from 8i and 9i or in general from one version to another, especially for the role of technical consultant..
Any documents or related references that explain the steps to do a successful conversion from a technical applications developers perspective would be great.
Thanks in advance..

The counter question would be that how you gonna do migration?
The other important point would be performance. There are many changes in optimizer behaviour comparetivly to 9i optimizer. metalink has so many references and notes on the same. Searching at metalink would be a good point as well.
Jaffar

Similar Messages

  • What is involved in going from local user accounts to active directory accounts with CCM 9.1.2?

    We are currently using local user accounts with CUCM 9.1.2 and are looking at integrating it into the active directory structure.
    We do utilize the same structure for user ID's.
    I am looking to find out what the changeover will entail and if anything else needs to be done prior to the integration.
    We also have Unity syncing up with CUCM for users as well as Contact Center sync'ed up for our ACD system.
    Thanks
    Mike

    Hey Mike,
    The process is pretty straight forward.  CUCM 9.X supports the coexistence of AD integrated users and local users so you don't have to worry about local accounts disappearing if they don't have an AD account.  The biggest thing to watch out for is that if you decide to revert back for whatever reason then the accounts that were in AD will be marked for deletion (from the CUCM, not AD) and will be removed after approximately 24 hours.  
    I recommend the following if you'd like to move to AD.
    Run a DRS backup of CUCM.  This is not necessary for the integration but is good practice in my opinion.  I'd also do a full export of your users using the BAT so you can reimport users to how they were before the integration should you decide to revert for any reason.
    Determine if you want to put the user's extensions in the telephonenumber field or ipPhone field in AD.  Once you make a decision, I recommend populating that information in AD so it is available when you do the integration.  
    Make sure your local CUCM user accounts usernames are exactly the same as your domain accounts.  That way when you do the integration the local users become AD users and keep all of their phone associations, group memberships, etc.  If you need to change the usernames then be sure to notify your users ahead of time so they can start logging into UCCX or UCM user pages, etc. using their new username. 
    Create an account in AD that has read-only rights to your directory.  Set the password to never expire.  You will use this account later for the integration.  
    In CUCM, go into Serviceability and make sure the "Cisco DirSync" service is activated on the Publisher server.
    Also in CUCM, navigate to the administration page and do the following:
    Go to System > LDAP > LDAP System and Check the box to enable Synchronizing.  Confirm the LDAP server type and attribute for User ID is accurate.  This is typically Microsoft Active Directory and sAMAccountName respectively.
    Go to System > LDAP > LDAP Directory
    Click Add New
    Give it a name (whatever you want).
    Put in the Distinguished Name of the AD integration account you created earlier. For example, if you created an account called ciscoldap in the Service Accounts OU in the abc.com domain then it would look something like this... CN=ciscoldap,OU=Service Accounts,DC=abc,DC=com
    Enter the password for the account.
    Enter the search base.  This can be a specific OU where your users exist, a parent OU which contains other OUs which contain all of your users or the entire domain.  If you do the entire domain then in the abc.com example you would specify DC=abc,DC=com.
    Select the option to perform a sync with AD on periodic intervals.  The lowest interval you can set is every 6 hours.
    Select either the telephonenumber or ipPhone field to be used for the user's extensions.  This will be whatever you decided and populated in AD in an earlier step.
    Add your primary and any backup domain controllers and ports.  If they are just domain controllers and you are not using SSL then specify port 389.  If they are also global catalog servers then you can do port 3268.
    Click Save and Click the "Perform Full Sync Now" button.
    I recommend that you also use LDAP for authentication as well so you only have one username and password to remember which is all controlled by AD.  To add this do the following:Go to System > LDAP > LDAP Authentication.
    Click Add New
    Check the box to use LDAP Authentication
    Add the same Distinguished name, passwords and user seach base that you used for your integration account earlier under the synchronization section.  Also add the same primary and secondary LDAP servers and ports you used earlier.  
    Click Save
    You can go a step further and create a filter to only pull in the users within the search base you specified and apply that.  For example, maybe only pull in users that have their ipPhone field populated.  Let me know if you have any questions on that or any of the above.
    I hope this helps!

  • .BridgeCache files and conversion from Br5 and Br6

    Since the Bridge Cache file structure has changed between Bridge 5 and Bridge 6, the cache file structure "should" be rebuilt (an ouch if you have a large cache system).
    Are the .BridgeCache/.BridgeCacheT files created by Bridge 5 compatible with Bridge 6?  In other words, will the information in these files allow the speed-up of the cache rebuild?  Will Bridge 6 completely reprocess all images and create new versions of these .BridgeCache files?  This information is useful if you have to handle the cache re-construction of massive cache system (I have 700,000 image in cashe - weeks to full reprocess).
    Please Please Please Mr Adobe, increase the number cache entries for Bridge 6 to be at least 1,000,000 files (up from the current max of 500,000

    Thanks for the reply.
    I very strongly hope your folks can change the upper document count limit in Bridge 6 to 1,000,000 or larger.  This would make things more reasonable for those folks with large image systems. I am crossing my fingers and hope the gods will comply to my request. 
    Gee wizz, if you would provide me with a test edition of bridge with this feature I would immediately run this as an exaustive test on my current system

  • I can`t do an @ sign on the internet however it works in Word etc, What can I do apart from copy and paste

    Any time I am on the internet I can`t use the @ key I get " instead. Any time I need an @ I open work use the @ (2) key and paste it in. PLease help

    Windows remembers the keyboard layout setting per application and you may have changed the keyboard layout by accident via a keyboard shortcut.
    See:
    * http://windows.microsoft.com/en-US/windows-vista/The-Language-bar-overview - The Language bar (overview)
    * Make sure that you have the Language bar visible on the Windows Taskbar.
    * You can do that via the right-click context menu of the Taskbar: Toolbars > Language Bar.
    * Check the keyboard language (keyboard layout) setting for the application that has focus via the icon on the Language bar.
    * You need to do that while Firefox has focus because Windows remembers the keyboard layout setting per application.
    * The default keys to rotate the layout is a combination (Ctrl+Shift or Alt+Shift) that can easily be used in Firefox to activate a menu item.
    * To avoid an unintentional switch assign a specific key sequence (Alt/Ctrl+Shift+number) to select keyboard layouts and remove the key combination to rotate layouts (Alt+Shift or Ctrl+Shift)
    * Control Panel > Regional and Language Options > Keyboards and Languages > Change keyboards > Advanced key settings > Change key sequence
    http://support.microsoft.com/kb/258824 - How to change your keyboard layout

  • What is involved in removing an image from a PDF document and inserting a new one?

    Our form producing process is very typical:
    (1) Start with a TIFF image, create a fresh PDF document.
    (2) By adding items such as links and interactive fields, convert the read-only document into an interactive form.
    Step (2) may take a lot of work, but fortunately when modifications are needed, it is always possible to edit the individual items. No need to redo the whole form from scratch.
    There are some cases, however, in which we have invested a substantial amount of work in Step (2), but we need to modify the underlying image, removing it and replacing it with a new one. We obviously don't want to destroy all the work done in (2).
    I envision the procedure as taking a rug from underneath a person and putting a new one.
    What is involved in doing that? Can that be done at the JavaScript level? Are there commercial packages that can do that? Is the Acrobart SDK required?
    -Ramon

    Document->Replace Pages
    Been in Acrobat since at least version 5.

  • Date Conversion from GMT to Local and Local To GMT considering DST.

    Hi,
    I have a application which displays the time in GMT across all the screens,and saves in Local/Default TimeZone as application would be deployed in europe and India.I have written a utility which does the conversion.
    I just want to know that how to handle the Daylight Saving Time[DST] as we are taking the data from database and converting it to LocalTime Zone.This works fine but what would happen if the sever time is changes due to DST.There would be problem between the object saved before the DST and after DST because we are simply converting stored time to GMT to show on the screen.
    Please share if you some solution/suggestions.
    Thanks.
    Akash.

    YoungWinston wrote:
    jschell wrote:
    That statement is phrased oddly.
    A java.util.Date uses a UTC offset with millisecond resolution.
    A jdbc driver converts that value into a "correct" value for the target database.And from.
    The form that is stored in the database is entirely database dependent. The actual form stored in the database can take many forms.True, but it is highly likely to be an offset from some "epoch" (Progress, for example, uses 00:00:00 1/1/-3714 UTC as I recall, and has 1-second granularity).Yes but as I said the phrasing was odd. A timestamp, by definition, must be an offset of something. Doesn't matter how it is represented. After all the year 2009 is an offset in the Gregorian calander.
    However in terms of actual storage the way it is stored is unlikely to be similar to what Java does. As examples neither Oracle nor MS SQL Server uses a single numeric offset.
    It might not even have a concept of timezone.Again true, although I've yet to come across one; and since OP is only concerned about the timezone in Java I'm not quite sure how relevant that is.
    Relevant in terms of the description in terms of what java does, what the database does and how it gets from java to the database.
    I would also expect any JDBC driver that cannot translate to or from a Java date correctly to document the fact in 60-point bold type, since it's a violation of the implied contract of ResultSet.getDate().Except that depends on your definition of "correct".
    Examples of that
    - Oracle doesn't have millisecond resolution at all in its common format.
    - MS SQL Server doesn't have the same resolution as java, instead there is an odd resolution (one three-hundredth of a second).
    - MS SQL Server doesn't have timezones, so if you don't take care and your data crosses timezones the timestamp will be different.
    The drivers will not warn you of things like that. At least not that I have seen.
    Format for Oracle.
    [http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:77562635789106]
    Format for MS SQL Server
    [http://msdn.microsoft.com/en-us/library/aa258277(SQL.80).aspx]

  • How do I stop the iMessage conversation from automatically showing when I go into the I message center? I only want the contacts to show down the left side and nothing on the right until I select a conversation to view.

    HOW DO I STOP THE WHOLE IMESSAGE CONVERSATION FROM AUTOMATICALLY SHOWING WHEN I GO INTO IMESSAGE? I only want the contact bar on the left to show and not the whole conversation, until I pick one to see.

    You can't. You can sign out of messages and turn it off, but you can't do what you would like to do. You can send feedback to Apple.
    https://www.apple.com/feedback/ipad.html

  • LR and DNG conversions from NEF

    Just received a batch of Nefs and corresponding dng conversions from a client. I immediately noticed that there was a serious white balance difference between these pairs--LR shows the Nefs at 5600 and the dngs at 7100. Is this typical. I have worked with dngs a few times, but this is the first set of images that I have seen with side by side conversions. Is this typical? Neither the dngs or nefs have been previously edited. I don't normally work with dngs--only when a customer insists.
    Very curious about this WB difference. Any explanations from the color gurus here? TIA

    I was aware that the numbers were relative and would likely be different, but in this case the images are visibly very different--I just gave the numbers to indicate what LR saw them as. When the difference is between 5600 (NEF) and 7100 (dng) one sees a big difference between the cool NEF and the warm dng on the screen. This difference is seen systematically in a batch of about 75 images. LR shows no metadata differences except the WB reading. Could this have resulted from a dng conversion in an older dng converter?

  • Poor raw conversion from Fujifilm X100 .raf format in Lightroom 3 and 4

    I'm seeing very poor results when doing raw conversion from Fujifilm X100 .raf format. Who can I contact about this? Is there anything I can do?
    See below for what is supposed to be a white curtain, lit by stage lighting. It results in a blown out blue channel, serious loss of detail, and very ugly gradient.
    (Lightroom 4.2, Camera Raw 7.2 on LEFT  --- Fujifilm X100 in-camera jpg on RIGHT)
    And for more detail:
    (Lightroom 4.2, Camera Raw 7.2 on TOP  --- Fujifilm X100 in-camera jpg on BOTTOM)
    (Lightroom 4.2, Camera Raw 7.2 on LEFT --- Fujifilm X100 in-camera jpg on RIGHT)

    The blue light is so intense that it is, or almost is, saturating the sensor.
    The camera’s built-in raw conversion handles this by shifting the color to cyan—clipping the blue and allowing the green to contribute more.  I doubt there was cyan lighting in the scene, only blue.
    Adobe does not shift the hue, but this makes the blue seem over saturated.  Adobe’s conversion may be more colorimetrically correct, but less pleasing in this case of intense lighting that the sensor cannot accurately record.
    It is a difference in camera profile used between the camera and Adobe.  Since Adobe does not supply camera-match profiles for much more than Nikon and Canon cameras, you’re not going to be able to fix things other than managing the over-saturation using HSL or WB or other things like lower-vibrance, higher saturation. 
    You could try making your own camera profile using an X-Rite Color-Checker Passport or the color-checker and the Adobe DNG Profile Editor:
    http://xritephoto.com/ph_product_overview.aspx?id=1257

  • HT201272 I dont understand how I can purchase a song from itunes and it WILL not transfer to my iPhone? What is the purpose of paying for music in the first place? I have authorised my computer. I have authorised manual transfer. I can transfer every song

    I've purchased music from iTunes and CANNOT drag to my iPhone...WHY? I have clicked manage myself and authorised my computer. What is the point of buying music if you cannot transfer from iTunes to an iPhone? I can happily transfer my CDs.????? I have the latest update on my iPhone and iTunes.

    Media was moved via external hard disk, and I think I moved the iTunes Media folder after consolidating it.

  • I create a playlist with songs that I purchased from itunes and when I try to sync it to my iphone some of the songs are missing but when I go to the playlist in itunes the song is there.  What could be happening?  What am I doing wrong?

    I've created playlists with songs I've purchased from iTunes and also added songs I've purchased from iTunes to existing playlists.  Everytime I go to sync the playlist to my iPhone I find some of the new songs missing from the playlist.  I've deleted the playlist from the phone and reinstalled it.  I don't know what I"m doing wrong. Anyone have any idea what could be the problem?

    Wondering if you haven't been bitten by the new "feature" of iOS 5, as was my son. turingtest2 explained it very well in reply to my own query about "missing" songs in playlists.
    Here's that thread...
    https://discussions.apple.com/message/16903613#16903613

  • HT201401 My iphone is dead is from singapore and i leave in greece and i have problem with support in greece what i can do

    Hello i have big problem i am seaman and i traveling arround the world i buy apple staff all the time from iphone 3g -3gs - 4- 5 i pad 1-2 macbook pro retina now i planing to buy imac my problem i have before one problem with my laptop and apple direct fix it to me and also buy it from singapore now i have problem with my mobile iphone 5 32gb i buy it also from singapore and i leave in greece i join to arrmy and no posible to use my mobile for 5 days the buttery come down and at last when i take off from army go back see my mobile empty put it on plug try to recharge but nothing fully dead not start no charge what i can do i speak with apple in greece and say me we check the problem but maybe you must send in singapore etc the problem i buy the iphone same price from greece no any change i have worldwide quaranty what i can do so i dont buy apple again only from greece is not possible i buy all my staff like this because i know if i have problem the apple have the best service but after that i very sad relay i dont know what i can do and in 5 months i lost 800 euro ... pls tell me what i can do
    thx for your time

    The iPhone warranty has never been International.
    Take the iPhone back to the country of origin or mail it to someone you know there and have them take it in for service.

  • Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    Last week, I had no problems streaming my MacBook Pro to my sony Bravia with a logix hdmi cable. I came back from holidays and now it doesn't work anymore.  What settings should my computer be on and what settings should my tv be on?

    TarahCurrie Sep 10, 2014 3:48 PM
    Restore From Time Machine Backup
    Reinstall OS X
    Get Help Online
    Disk Utility
    MacBook Pro, Mac OS X (10.5.8)
    You are running 10.5.8
    Did you try booting off your Install disk holding the c key down.  From here you can get to the drop down menu just a few clicks in (you are not going to install) and run  the Disk Utility>Repair Disk.  See if it will let you do this.

  • HT1386 I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone.  On the computer, a circle is next to the song and the title faded out.  What the heck is that all about and how do I get my songs back onto my

    I synced (updated) my iphone to itunes and some songs were deleted from my iphone playlist on my phone.  On the computer, a circle is next to the song and the title faded out.  What the heck is that all about and how do I get my songs back onto my phone playlist?  Never happened before.  My software is up to date?

    http://support.apple.com/kb/HT2519

  • No matter what site I download firefox from, there is always an error and will not open or install, what is the problem? I'm on a Mac with OS 10.4. I'm trying to download firefox 3.6.12.dmg

    When trying to download firefox 3.6.12.dmg to my Mac, OS 10.4, no matter what site I download it from, it will not install. There is always some error message. I'm trying to download it again now, and I know it will be the same thing again and again. Can anyone open a window for me, since the door is constantly being slamed in my face?
    Thanks

    Same proble here, although the Firefox system requirements says it is OK to have PowerPC G3 G4 or G5 ( I have G5 2GHZ)
    My solution; very simply use timemachine to restore the previous Frefox 3.x
    worked great in 3 mns

Maybe you are looking for