What is PID and how to set it in ORADEBUG?

I want to run ORADEBUG. But I don't know how to set pid.
My system is Window Server 2003.
Any help will be appreciated.
Thanks.

Hi, yingkuan,
Thanks.
How can I find which PID is what I want? For example,
6 days, I run SQLPlus to add a new datafile into the tablespace.
It is still running now.
How can I find the PID for this process?
BTW: thank you very much for answering my other questions.
But I still havenot figured out the Add New Datafile issue.
There is some one else from the IT dept. working on that for me.
Thanks,

Similar Messages

  • I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

    I have an apple tv 1st generation, and there is a setting for airtunes. can someone tell me what this is and how to use it?

    I've looked at that, but on my PC, "look for remote speakers connected with airtunes" isn't an option.
    The only options I get are "prevent ipods [etc] from syncing automatically" , "warn me when [X %] of the data on this computer will be changed" and "forget all remotes". Its also got a list of backups I have saved, as well as a button to reset sync history.
    When I am playing a song, the "airplay" button isn't even visible.
    I am sure that the apple tv setting is on as well. Is there anything else you can help me with?

  • IPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    iPod Nano 2nd Generation is requesting 4 digit code. I have never set a lock code. What is this and how can I get my Nano running again?

    There is no other way to bypass the combintation lock other than to connect the nano to iTunes and restore it to factory settings, erasing all content and settings from the iPod.
    B-rock

  • When I try to "set up" to share iPhotos on Facebook, I get the message "try later."  What is this and how do I resolve it?

    When I try to "set up" to share iPhotos on Facebook, I get the message "try later."  What is this and how do I resolve it?Setting

    Same issue here... used to work fine, now when I try to set up to publish photos to Facebook, the "Please try again later" message comes up in the pop-up window instead of the Facebook login.  It just started doing this last week.

  • What is 3G and how do I use and set up for my ipad2?

    hi just got a ipad2 with wifi and 3G off gumtree just wondering what is 3G and how do i use and set it up
    thanks

    no you dont need one follow steps below
    for at&t
    http://support.apple.com/kb/HT4157
    for verizon
    http://support.apple.com/kb/HT4571

  • How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?

    Hi All,
    How to create a Platinum,Gold and Silver Customer and how to set different price for a single material based on customer?
    Assume Material is Pen.
    While creating Sales Order in VA01 how to bring different price for the same material for Platinum,Gold and Silver Customers.
    Kindly help me out.
    Thanks,
    Renjith Jose

    A good place to start is http://www.javaworld.com/javaworld/javatips/jw-javatip34.html
    Also, do a search in this forum on HttpURLConnection. That class allows you to use POST method to send form data to a web server.
    "Hidden" variables are only hidden in HTML. The HTTP that gets POSTed to the web server doesn't distinguish between hidden and not hidden. That is, the content you would write to the HttpURLConnection.getOutputStream() would be something like:
    hidden=1&submit=ok(Of course, the variable names would depend on what the web server was expecting from the form.)
    Also, be sure to set the Content-Type request parameter to "application/x-www-form-urlencoded"

  • When I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    when I try to make a new video, a window comes up that says,"The operation could not be completed," and then under it, it says,"No other information is available about the problem," what is happening and how do I fix it?

    Hi
    And without info - it's near to impossibly to help. Try my general troubleshooting note:
    Troubleshooting note
    When iMovie doesn't work as intended this can be due to a lot of reasons
    iMovie Pref files got corrupted - trash it/they and iMovie makes new and error free one's
    problem in iMovie Cache folder - trash Cache.mov and Cache.plist
    Creating a new User-Account and log into this
    This forces iMovie to create all pref. and cache files new and error free
    Event or Project got corrupted - try to make a copy and repair
    a Codec is used that doesn't work (even though iMovie and/or iDVD tries to / they fail in the end)
    version miss match of QuickTime Player / iMovie / iDVD
    preferences are wrong - Repair Preferences
    other hard disk problem - Repair Hard Disk (Disk Util tool - but start Mac from ext HD or DVD)
    External hard disks - MUST BE - Mac OS Extended (hfs) formatted to work with Video
    ( UNIX/DOS/FAT32/Mac OS Exchange - works for most other things - but not for Video )
    USB-flash-memories - usually do not work
    Net-work connected hard disks - usually do not work (most often not fast enough and WRONGLY FORMATTES as DOS etc)
    iPhoto Library got problems - let iPhoto select another one or repair it. Re-build this first then try to re-start iMovie. When iMovie starts-up it first look trough this iPhoto library and if faulty it all Halt’s.
    This You do by
    First -  close iPhoto
    Secondly - on start up of iPhoto - Keep {cmd and alt-keys down}
    Thirdly - now select all five options presented
    THEN - WAIT a long long time (>20 hours are not strange)
    free space on Start-Up (Mac OS) hard disk to low (<1Gb) - I never go under 25Gb free space for SD-Video (4-5 times more for HD)
    external devices interferes - turn off Mac - disconnect all of them and - Start up again and re-try
    GarageBand fix - start GB - play a few notes - Close it again and now try iMovie
    Screen must be set to million-colors
    Third-party plug-ins doesn't work OK
    Run "Cache Out X", clear out all caches and restarts the Mac
    Let Your Mac be turned on during one night. At about midnight there is a set of maintenance programs that runs and tidying up. This might help
    Turn off Your Mac - and disconnect Mains - for about 20-30 minutes - at least this resets the FireWire port.
    In QuickTime - DivX, 3ivx codec, Flip4Mac, Perian etc - might be problematic - temporarily move them out and re-try
    (I deleted the file "3ivxVideoCodec.component" located in Mac HD/Library/Quicktime and this resolved my issue.)
    buenrodri wrote
    I solved the problem by removing the file: 3ivxVideoCodec.component. after that, up-dated iMovie runs ok.
    Last resort: Trash all of iMovie and re-install it
    Yours Bengt W

  • I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    I tried to import a PDF of a line drawing into Photoshop Elements. The thumbnail looks fine, but when imported the file is empty. This used to work in the past. What is wrong and how do I solve this?

    Hi
    The value of the Channel Strip volume etc is not stored within the C Strip setting, as you have discovered.
    If you really wanted, you could add a Gain plug to the strip, with it set to give the correct output level with the Fader set to 0
    (Or just set the fader manually in MS)
    CCT

  • I need information on how Adobe Drive works and how to set it up

    Hey folks,
    believe it or not, but I have been searching a lot on the web already on how to find information how Adobe Drive works and how to set it up.
    Most information that I found is old and seems to be valid only for older versions of Creative suite. Here in the company we use CS5.5 and will switch to CS6 soon.
    I already downloaded Adobe Drive 3 and installed it on my Mac. Unfortunately I don't know what to do next? Do I need Adobe CQ to make it work? Or can I use it with an existing SVN infrastructure, that we have here? Actually I would like to access the SVN via Adobe Bridge. But after the installation of Adobe Drive my Bridge CS5.5 is crashing while starting up, and I didn't find out how to fix this again.
    Actually I just found the manual for Adobe Drive 3 and read it. Seems to be easy in case its working. But it's not in my case, as mentioned above.
    Any idea what could be the problem?

    Thanks,
    in the meantime I managed to re-setup Adobe Drive 3 again. Bridge CS5.1 is still crashing (i have a log-file with a detailed error-report, if somebody knows how to extract information from this.
    At least now I can start Drive as a standalone application.
    So now my main question is how to connect Drive 3 to our subversion infrastructure in the company. Does anybody have information on this?

  • When I connect my iphone to itunes it ask a passcode really what is it and how can I find it?

    When I connect my iphone to itunes it ask for a passcode, really what is it and how can I find it?

    Ok follow the instructions here
    http://support.apple.com/kb/HT1212
    follow the never synced with iTunes option and it will set up as new

  • My epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    my epson stylus SX235W has all of a sudden decided it won't print from my mac. it says rastertoescpII has unexpectedly quit. what is this and how do i get it to print from my mac again?

    Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
    Credit for this solution to ASC user Yuengdog1983.

  • What is "other" and how to get rid of it?

    I have attached a picture of the "other" on my MacBook Pro. I've run CleanMyMac 2, Gemini Pro, and other programs to clean out my computer, and I STILL have tons of "other" files eating up my memory. What is it and what can I do to clean out my hard drive? Thanks for the help!

    For information about the Other category in the Storage display, see this support article. If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
    Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
              iPhoto ▹ Empty Trash
    Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
    According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation—not the mythical 10%, 15%, or any other percentage. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
    When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as  Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
    See this support article for some simple ways to free up storage space.
    You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
    Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
    Proceed further only if the problem isn't solved by the above steps.
    ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
    Back up all data now.
    If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
    Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
    Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
    sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
    sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
    Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
    The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
    I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
    When you're done with the app, quit it and also quit Terminal.

  • I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it?

    I've installed Flip4Mac WMV in Lion and when I try to listen to audio in some sites, it starts playing and after about 0.5 seconds it starts playing again. So, I have the same thing playing with a delay... What is happening and how to fix it? Is there any other way to play theese kinds of files without using Flip4Mac WMV?

    Use Flash Media Server to stream the files.......set up a timer and have all three of them play at once....and have a button switch the streams depending upon which stream you want to play.....and wallah......
    you can also capture the stream.time from the video playing and resume from that point on the other videos as well....havent done this theoretically so I dont know how smooth the transistion between streams will be....but it can be done....
    plus u may have to use double buffering techniques to make sure it starts up right away......
    thelegendaryghost

  • Can someone explain what DHCP is and how I do I connect to WiFi  hotspot?

    Can someone explain how a wireless network/router with an internet connection allows computers with a wireless card to connect to the internet? For instance, In an internet cafe with WiFi, how does my macbook get the IP address for the ISP that the cafe uses to allow me to open a webpage with Safari? What is DHCP and how should I set my internet preferences to allow me to use a network other than my own.
    The reason I ask so many questions is that I can connect to the internet with my Airport Express base station network at home but not in my local WiFi cafe. Can see the network but not connect.

    Most Internet Cafes utilize DHCP to dynamically provide a wireless client with an IP address for that session. DHCP is a protocol used by networked computers (clients) to obtain IP addresses and other parameters such as the default gateway, subnet mask, and IP addresses of DNS servers from a DHCP server. It facilitates access to a network because these settings would otherwise have to be made manually for the client to participate in the network.
    You Mac's AirPort, in turn, is set up to be a DHCP client by default. This allows your Mac to accept the dynamically provided IP address information from the Internet Cafe's DHCP server.
    The reason I ask so many questions is that I can connect to the internet with my Airport Express base station network at home but not in my local WiFi cafe.
    It sounds like the AirPort settings that your Mac is using is no longer at their default settings...and my be the reason you cannot connect to the Internet at the Cafe...or, the Cafe has additional settings required. I suggest that you check with the Administrator of the particular Internet Cafe you're having trouble connecting with to find out what settings are necessary to use their wireless network.
    A typical AirPort is set up as follows:
    System Preferences > Network > Show > Network Port Configurations
    - Verify that AirPort is "On" (checked)
    - Verify that AirPort is at the top of the list. If it isn't, you can drag it to the top.
    Systems Preferences > Network > Show > AirPort
    AirPort tab
    - By default, join: Automatic
    TCP/IP tab
    - Configure IPv4: Using DHCP
    - Configure IPv6: Automatically or Off
    Proxies tab
    - Configure Proxies: Manually
    - Select a proxy server to configure: <All proxies should be unchecked unless you specifically require a proxy for Internet access.>
    - Exclude simple hostnames (unchecked)
    - Bypass proxy settings for these Hosts & Domains: <leave blank>
    - Use Passive FTP Mode (PASV) (checked)

  • TS4291 I can't send mail from my iPad apps, I just get the error message, 'The recipient- was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    I can't send mail from my iPad apps, I just get the error message, 'The recipient… was rejected by the server because it does not allow relaying.' Does anyone know what this means and how to fix the problem.

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say "Cannot Connect to Server"?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    iOS: 'Mailbox Locked', account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email  -  https://itunes.apple.com/us/app/group-email!-mail-client-attachments/id380690305 ?mt=8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
     Cheers, Tom

Maybe you are looking for