What is raise form_trigger_failure

db and dev 10g rel2
hi all ,
could you please tell me about the functionality of this statement ? what can i do with it ?
i searched the online help , and i found just one page ,and got nothing from it , and there is nothing in the documentation .
thanks in advance

Hi
In a very basic and generic to explain 'Raise Form_Trigger_Failure' is , when you want to tell the end user that their input is not correct, use this statement. By using this statement oracle will not allow user further action.
Hope you understood. If not the read the Forms 6I document which will be very help full - you can get it from below link simply
https://drive.google.com/?tab=wo&authuser=0#my-drive
newbi_egy wrote:
db and dev 10g rel2
hi all ,
could you please tell me about the functionality of this statement ? what can i do with it ?
i searched the online help , and i found just one page ,and got nothing from it , and there is nothing in the documentation .
thanks in advance

Similar Messages

What is diffrerence between return builtin and raise form_trigger_failure

what is diffrerence between return builtin and raise form_trigger_failure

I believe you mean using the keyword RETURN; in a forms trigger versus raise form_trigger_error
Mostly Depends on what trigger it is used in
Generally
Return: Stops the execution of the trigger and exits when it encounters the return keyword, however, no additional checks or form status settings are made. Acts like trigger fired successfully.
Raise form_trigger_failure: Sets forms/block/record status (at appropriate level) depends on trigger may rollback etc.. see trigger defintions.
Dave

Whats raise form_trigger_failure do??

what does a raise form_trigger_failure do??
is it like if the form fails the activate then raise this error ??

It is important to understand that raising the error prevents the triggering event from being completed. For example, failure in WHEN-VALIDATE-ITEM results in the item remaining marked as requiring validation and prevents navigation out of the item (assuming validation unit is set to item). Failure in any commit time trigger will prevent the commit, etc.

RAISE FORM_TRIGGER_FAILURE is not working

I am customizing a medical form with two blocks: cov_med_prem_header and cov_med_prem_lines. When user select emp_group from header, the list of medical program with end_date = '31-DEC-4712' will show at the detail block. Once a year at the open enrollment, HR will end date the previous year's program and enter the same programs but with different premium, also set the end_date = '31-DEC-4712'. In order to prevent user from enter to the wrong record, I added when-validate-record trigger for the detail block:
declare
max_effective_end_date DATE;
begin
select effective_end_date
into max_effective_end_date
from cov.cov_medical_premiums
where emp_group = :cov_med_prem_header.emp_group
and coverage_type = :cov_med_prem_lines.coverage_type
and part_time = :cov_med_prem_lines.part_time
and med_provider = :cov_med_prem_lines.med_provider
and sysdate between effective_start_date and effective_end_date;
if (:system.record_status = 'INSERT') and (max_effective_end_date = '31-DEC-4712') then
MESSAGE ('YOU HAVE ENDTERED THE WRONG RECORD. PLEASE CHECK AND TRY AGAIN!');
RAISE FORM_TRIGGER_FAILURE;
end if;
exception
when others then null;
end;
But the RAISE FORM_TRIGGER_FAILURE is not working because the exception, but if I take out the exception part, I am not able to insert into the form, message like unhandled exception.
Can anyone help with this? Thanks.

Hi,
There should not be an Exception part if you are using Form_Trigger_failure. So first find out what exception you are getting with the code, commenting out the raise form_trigger_failure. And first handle that, and then remove the exception part and use form_trigger _failure

Exit / Clear Form & raise form_trigger_failure

I hope someone has encountered a similar situation and can help me out here.
I need to provide the functionality of allowing the user to Exit or Clear a form in case there are errors due to item validations.
The problem I am encountering is that since the item validations have triggered form_trigger_failure, the Exit / Clear buttons that I coded with Exit_form / Clear_form do not work.
I can have the user use the Exit key to exit, but it would be great if there is some way of providing this functionality using a button.
Thanks in advance.

Thileepan,
Thanks for your suggestions.
I am already using Clear_Form(No_Validate) and the fields are set to Required = No, validation being done in a when-validate-item trigger.
I tried suggestion #3, but that results in the validation that takes place as the user leaves a field being lost, which they want(won't accept form level validation).
Suggestion 4 works for the clear form, but if I don't raise form_trigger_failure in the when-validate-item trigger the validation error message is displayed and focus moves to the next field in case of user input error. What I want is to have the focus stay in the field containing the error and still give the user the ability to Exit/Clear the form in case they get tired of trying to come up with a value that satisfies the validation criteria.
Thanks.

Raise form_trigger_failure ???

Hello expert,
i have a code on save button click as:
commit_form;
if :issue_qty >:req_qty then
raise form_trigger_failure
end if;
if issue_qty is greater than requisition_qty then will record save in database due to commit_form statement.
in which case records do save in db.
and what changes will rollback if form_trigger_failure raised as we issue commit_form statement in above code?
as i know no changes should save in db but i am not sure.
please clear my doubt .
thanks
yash

yash_08031983 wrote:
Hello expert,
commit_form;Save the changes in the form.
then
if :issue_qty >:req_qty then
raise form_trigger_failure
end if;Fail this code if not true, but forms save then changes as code are execute line by line in ascending order.
if issue_qty is greater than requisition_qty then will record save in database due to commit_form statement.
in which case records do save in db.If you want this saver after false the condition then re write the code like
if :issue_qty >:req_qty then
raise form_trigger_failure;
else
commit_form;
end if;
But it can't prevent default save icon of icon toolbar to save. If you also prevent that write key-commit trigger at form level and paste this code in it.
Hope this will help you

Raise Form_Trigger_Failure on When-Button-Pressed ORA-01410 Invalid RowID

Hello to all...
I have an error whit Raise Form_Trigger_Failure on trigger When-Button-Pressed.
I guess the error is when does the Raise Form_Trigger_Failure
When validate something, this validation ask me if i want to continue.
When i answer NO, give me this error: ORA-01410 Invalid RowID
If i answer YES, the process continue and in an unexpected moment, give that error too
Why give me that error?
How can i resolve this error...help me
thanks...
Part of Code
FOR i IN 1..TItemsAsi1.LAST LOOP
IF TItemsAsi1(i).c_error IS NOT NULL THEN
l_error := l_error + 1;
IF TItemsAsi1(i).c_error = 'ND' THEN
IF NOT Fpa_mensaje.disp_consulta_sino('Atención','No hay datos suficientes para generar Asiento de cierre relacionado a Reconocimiento de los recursos del ejercicio') THEN
RAISE FORM_TRIGGER_FAILURE;
END IF ;     ELSIF TItemsAsi1(i).c_error = 'AD' THEN
IF NOT Fpa_mensaje.disp_consulta_sino('Atención','Hay cuentas Acreedoras con saldo Deudor CUENTA: '||TItemsAsi1(i).c_cuenta||'. ¿Desea continuar con el cierre? ') THEN
RAISE FORM_TRIGGER_FAILURE;
END IF ;     ELSIF TItemsAsi1(i).c_error = 'DA' THEN
IF NOT Fpa_mensaje.disp_consulta_sino('Atención','Hay cuentas Deudoras con saldo Acreedor CUENTA:'||TItemsAsi1(i).c_cuenta||'. ¿Desea continuar con el cierre? ') THEN
RAISE FORM_TRIGGER_FAILURE;
END IF ;     END IF;END IF;END LOOP;

delete from <table> where rowid like '<block id>%'Arrgh. To be honest, this is the worst sql-statement i have seen this year. i hope the statement will raise an error on execution, but even if it would get executed, what should be the reason for something like this? Delete anything which is stored in a specific block, regardless of the meaning ?

Raise form_trigger_failure do not work

Hi,
I catch an error in on-error trigger and raise form_trigger_failure, this should be triggered when user clic <ok> button, that works, but in this screen user can go to menu and use another option that opens another screen, when user do that, the error message is displayed but form_trigger_failure do not raise and this another screen can be opened, does someone has any idea on how to fix it? Thanks.

RAISED_FORM_TRIGGER_FAILURE will trigger only for the form whish has that command. So it will not failed when user navigate to anotyher form.
What you want to do is if you get this message then poup a modal window and show the error. So at that time user unable to goto any other form because they can not navigate to any other window other than the modal window with the error
Thanks
* if this is correct/helpful then please mark it

Raise form_trigger_failure is not working in multi-record block?

raise form_trigger_failure is not working in multi-record block.
Why?
I am using Form 9i.
Thanks and regards,
Vikas

Here is my code. Workorder_master is single block, workorder_dtls is multi-block.
This code is written in KEY-NEXT-ITEM of labour_code in workorder_dtls.
If suspended labour, invalid labour etc. is selected then it should not leave labour_code, but does not happen as I like. What will be the solution?
DECLARE
v_count                         NUMBER;
v_status                    CHAR(1);
v_workorder_no     VARCHAR2(15);
v_pass_no                    VARCHAR2(15);
v_rec_pos                    NUMBER;
BEGIN
     IF :workorder_dtls.labour_code IS NOT NULL THEN
          v_rec_pos := :SYSTEM.CURSOR_RECORD;
          SELECT COUNT(*) INTO v_count FROM labour_master
                              WHERE labour_code = :workorder_dtls.labour_code;
          IF v_count > 0 THEN --if labour exist.
               SELECT status INTO v_status FROM labour_master
                              WHERE labour_code = :workorder_dtls.labour_code;
               IF v_status = 'I' THEN--'I' stands for busy.
                    --check if labour is for extension i.e. if labour is working for same workorder
                    SELECT COUNT(*) INTO v_count FROM workorder_dtls
                                        WHERE labour_code = :workorder_dtls.labour_code
                                        AND workorder_no = :workorder_dtls.workorder_no
                                        AND to_dt <= SYSDATE;
                    IF v_count > 0 THEN
                         --if working in same workorder then for extension, then give from_dt, to_dt
                         SELECT MAX(TO_DT)+1 INTO :workorder_dtls.from_dt FROM workorder_dtls
                                             WHERE labour_code = :workorder_dtls.labour_code
                                             AND workorder_no = :workorder_dtls.workorder_no
                                             AND to_dt <= SYSDATE;
                    ELSE
                         --if not working in same workorder then give message.
                         SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                             WHERE labour_code = :workorder_dtls.labour_code
                                             AND to_dt <= SYSDATE;
                         MESSAGE('This labour is already working through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                         MESSAGE('This labour is already working through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                         RAISE FORM_TRIGGER_FAILURE;
                    END IF;
               ELSIF v_status = 'A' THEN--'A' stands for available.
                    :workorder_dtls.from_dt := SYSDATE;
               ELSIF v_status = 'H' THEN--'H' stands for help-up.
                         SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                             WHERE labour_code = :workorder_dtls.labour_code
                                             AND to_dt <= SYSDATE;
                    MESSAGE('This labour has been held-up for not submitting gatepass.');
                    MESSAGE('This labour has been held-up for not submitting gatepass.');
                    RAISE FORM_TRIGGER_FAILURE;
               ELSIF v_status = 'S' THEN--'S' stands for suspend.
                         SELECT workorder_no, pass_no INTO v_workorder_no, v_pass_no FROM workorder_dtls
                                             WHERE labour_code = :workorder_dtls.labour_code
                                             AND to_dt <= SYSDATE;
                    MESSAGE('This labour has been suspended through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                    MESSAGE('This labour has been suspended through workorder no. '||v_workorder_no||' using pass '||v_pass_no);
                    RAISE FORM_TRIGGER_FAILURE;
               END IF;
               IF v_status IN ('A', 'I') THEN
                    :BLK_TEMP_WORKORDER.LABOUR_CODE := :WORKORDER_DTLS.LABOUR_CODE;
                    GO_BLOCK('WORKORDER_DTLS_IMG');
                    EXECUTE_QUERY(NO_VALIDATE);
                    GO_RECORD(v_rec_pos);
                    GO_ITEM('WORKORDER_DTLS.FROM_DT');
                    IF :workorder_dtls.from_dt + 180 <= :workorder_master.to_dt THEN
                         :workorder_dtls.to_dt := :workorder_dtls.from_dt + 180;
                    ELSE
                         :workorder_dtls.to_dt := :workorder_master.to_dt;
                    END IF;
               END IF;
          ELSE --if labour does not exist.
               MESSAGE('Invalid labour code');
               RAISE FORM_TRIGGER_FAILURE;
          END IF;
     END IF;
END;

RAISE form_trigger_failure not working in purchase order form

Hi,
I am working on a customization in Purchase Order Form (poxpoepo)
This is what I tried to do.
CURSOR 1_cur IS
SELECT pol.LINE_NUM v_line
,gcc.segment1 v_seg
FROM gl_code_combinations gcc
,PO_DISTRIBUTIONS_ALL pod
,po_lines_all pol
WHERE SUBSTR(gcc.SEGMENT1,1,1) = 'X'
AND gcc.code_combination_id = pod.code_combination_id
AND pod.PO_LINE_ID = pol.PO_LINE_ID
AND pol.po_line_id = v_po_line
AND pol.PO_HEADER_ID = v_po_header;
CURSOR 2_cur IS
SELECT pol.LINE_NUM v_line
,gcc.segment1 v_seg
FROM gl_code_combinations gcc
,PO_DISTRIBUTIONS_ALL pod
,po_lines_all pol
WHERE SUBSTR(gcc.SEGMENT1,1,1) = 'X'
AND gcc.code_combination_id = pod.code_combination_id
AND pod.PO_LINE_ID = pol.PO_LINE_ID
AND pol.PO_HEADER_ID = v_po_header;
BEGIN
v_error_found := false ;
IF (form_name = 'POXPOEPO' AND
(block_name IN ('PO_LINES' ,
'PO_SHIPMENTS',
'PO_DISTRIBUTIONS') AND
event_name = 'WHEN-NEW-ITEM-INSTANCE') OR
(block_name = 'PO_HEADERS' AND
event_name = 'WHEN-NEW-RECORD-INSTANCE' AND
name_in('SYSTEM.BLOCK_STATUS') = 'QUERY' ) OR
(block_name = 'PO_APPROVE' AND
event_name = 'WHEN-NEW-BLOCK-INSTANCE' )
) AND
NAME_IN('PO_LINES.PO_HEADER_ID') IS NOT NULL AND
NAME_IN('PO_LINES.PO_LINE_ID') IS NOT NULL AND
name_in('PO_LINES.LINE_NUM') >= 1 ) THEN
v_po_header_id := NAME_IN('PO_LINES.PO_HEADER_ID');
v_po_line_id := NAME_IN('PO_LINES.PO_LINE_ID');
v_line_num := NAME_IN('PO_LINES.LINE_NUM');
IF block_name in ('PO_LINES' , 'PO_SHIPMENTS', 'PO_DISTRIBUTIONS') THEN
v_seg := null;
FOR cursor1 in 1_cur
LOOP
if cursor1.v_seg = 'X' THEN
v_seg := 'X';
v_line_num := cursor1.v_line;
EXIT;
end if;
END LOOP;
ELSIF block_name in ('PO_HEADERS','PO_APPROVE') THEN
FOR cursor2 in 2_cur
LOOP
if cursor2.v_seg = 'X' THEN
v_seg := 'X';
v_line_num := cursor2.v_line;
EXIT;
end if;
END LOOP;
END IF;
IF v_seg = 'X' then
fnd_message.set_string('custom message to be displayed.');
FND_MESSAGE.ERROR;
IF block_name = 'PO_APPROVE' THEN
go_block('PO_HEADERS');
raise form_trigger_failure;
END IF;
END IF;
END IF;
END;
I actually want to achieve somewhat like this. When ever the charge account field start with 'X' or in other words if segment1 is 'X' and if changes are made to that line like note to supplier is changed and saved then the user should not be allowed to approve/reapprove the order and it shall pop up the message and ONLY restrict from going further if the user hits the APPROVE button. Highlighted in bold should have actually taken care of the requirement from proceeding to the next level of approval but it is not. I have had several debug messages and I am pretty sure that it is satisfying the condition of going to the PO_APPROVE block and still not raising form trigger failure. Could you please help me handle this scenario?

Your Raise works -- it will terminate your procedure, Change_Detail_Block_Status.
But, how are you calling the procedure? It is in THAT place that you should look for your problem.
If you call the procedure, and then have coded EXCEPTION WHEN OTHERS THEN.... or something similar, you might be ignoring the "Raise FTF".
In addition, you probably need to add these lines in your form where navigation or a commit or similar code causes a trigger to call your procedure:
If not Form_Success then
Raise Form_Trigger_Failure;
End if;

Buitin RAISE FORM_TRIGGER_FAILURE not working in forms Personalization

Hi,
I create a SIT where i dn't want user to create more than 1 record. I successfully able to set the condition and popup error message in action tab when more than 1 record is entered by the user. Now I want to stop further processing and for that purpose I use built-in RAISE FORM_TRIGGER_FAILURE. But it won't work and user can able to process further easily.
Can any one guide me how I acheive this using forms personalization?

Pl see ML Doc 420518.1 on why this does not work
HTH
Srini

[10g] Raise form_trigger_failure in an inner block

Hi,
In a When-Validate_Item on a field,
I have to issue a SELECT statement wich could stop the cursor in the field when the select return a flag value of 'NO'.
So I created an inner block and if the test to 'NO' is true, I raise a form_trigger_failure.
Also this inner block has an Exception section that tests NO_DATA_FOUND.
Now when the flag is equal to 'NO', the When-Validate_Item continues without staying locked on the field.
I tried adding an exception section to the outer block and enter this code:
EXCEPTION
when form_trigger_failure then
raise form_trigger_failure;
end;
But it does not work.
Could someone please help me blocking the cursor in that field?

Is the 'raise form_trigger_failure' not working or is your 'query to test for 'NO' flag' not working.
Your can display a message just before the raise form_trigger_failure to check if your test for 'NO' is actually working. Aslo check for the correct case, ie upper or lower, while testing the flag.
(I think your EXCEPTION block is mistyped)

Raise form_trigger_failure Navigation issue.

Hi All,
I want the functionality of RAISE FORM_TRIGGER_FAILURE on the block when I will RAISE the Exception, but at the same time it should allow me to operate on another block's items.
E.G.
Block_A.Item_A.when-validate-item Raise. it should raise if I will try to navigate to other items of Block_A.
But I want If I will navigate to Block_B.Item_B when cursor is in Block_A.Item_A,
it should not raise the exception from the when-validate-trigger of Block_A.
Thanks,

That's a pretty strange way to do edits. But if you must, you could call the edits done within the block from a when-new-item-instance trigger on the block, and do NOT do any editing from the when-validate triggers.
However if you do the above, then you must ALSO run full validation on your block from the commit process, before you do a commit_form.

Raise FORM_TRIGGER_FAILURE don't work well.

Dear All,
I'm facing a problem that I can't understand well.
I have a screen that contain two fields: Field1 and Field2.
The control I had to add: is to avoid saving duplicate records, and also do not save a record if one of these fields is empty.
I wrote the trigger KEY_COMMIT, where I did:
Line: -----
declare
     x number;
     ret number;
begin
if ( (:Field1 is null ) and (:Field2 is null ) ) then
     ret:=msgbox('Please choos a Field1 and Field2');
               RAISE FORM_TRIGGER_FAILURE;
else if ( (:Field1 is null ) or (:Field2 is null ) ) then
     ret:=msgbox('Please Enter Field1 and Field2');
               RAISE FORM_TRIGGER_FAILURE;
               else
                    begin
                    select count(*) into x from TABLE1 where xxxxxxxx=:Field1;
                    exception when others then
                         x:=0;
                    end;
                    if x>0 then
                         ret:=msgbox('Field1 Already Registred');
                         :Field2:='';
                                             RAISE FORM_TRIGGER_FAILURE;
                    else
                         commit;
                    end if;
end if;
end if;
end;
Line: -----
The problem in that is when I click on EXIT button, I get this message: " Do you want to save all modifications you made? "
If I click YES => I find in te table TABLE1 that, also the records having one of the above fields empty, are saved.
How Come?
As I know, Raise FORM_TRIGGER_FAILURE must stop the trigger and then, no commit. It's not the case !
Can someone help me in that? Did I wrote the wrong trigger ?
Many Thanks for your help.
Imad QANDOUCI

you wrote an KEY-COMMIT Trigger. But you press KEY-EXIT. Why should KEY-COMMIT Trigger fire on KEY-EXIT?
Put your checks to PRE-INSERT and PRE-UPDATE triggers (to both!). Best, avoid duplicate code by writing a procedure consisting the checks and coll the procedure in the triggers.

Raise form_trigger_failure does not work in when-timer-expired trigger

hi everbody,
i create timer (no repeat) in when-validate-item trigger for an item then in timer i use raise form_trigger_failure for not posting related item.but raise form_trigger_failure not work in timer and cursor go next item ? do you say anything for that ? thanks..

when your validation runs ok, then and only then you should create the timer and in the WTE you navigate to the other item.
Think about: The WTE-trigger runs after the when-validate-item. It runs not within the WVI. That's the reason why you cannot cancel the WVI with the WTE.
Only the WTE can be stopped with the Form_Trigger_Failure.

What is raise form_trigger_failure

Similar Messages

Maybe you are looking for