What is the aproach for validation in Sync Mode Batch ?

Hi everyone!
I am using ADF to develop my application, and ADF Swing Client for View.
When I run application in Immediate Sync Mode. I didn't care about validation of input value, because Validation method in BC do it for me.
But, when I changed Sync Mode as Batch. Everything becomes bad. The validation methods cannot run immediately. They only invoke after when I press commit button.
I want validation methods in Sync Mode Batch run as well as in Immediate Mode.
How to do it?
Must the way of coding change?
Please give me some advice!
Tuan
Hanoi - Vietnam
Message was edited by:
TuanVM

Tuan,
actually synch mode alwas checks with the server for validation, while batch mode does it when submitting data (thus batch mode). If you need immediate validation then use synch mode. If you need to scale up performance - e.g. in a 3 tier deployment - then use batch mode. Alternatively add field validation to your screens using listeners to make sure the user doesn't leave with wrong input provided.
Frank

Similar Messages

What is the procedure for verifying that my photos, after syncing up my iPad and my iMac, actually are in iTunes?

What is the procedure for verifying that my photos, after syncing up my iPad and my iMac, actually are in iTunes?

iTunes manages your photos between the iPad and iPhoto on the iMac. If you have things set up correctly, then the photos will go to iPhoto for safe keeping and later use.

Hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks

hi. my laptop was reformatted recently, and my itunes there erased. i created a new one but the problem is it doesn't sync with my ipod anymore. what is the solution for this? can someone give me a tip? will really appreciate. thanks

Syncing to a "New" Computer or replacing a "crashed" Hard Drive: Apple Support Communities

When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?

When I sync ical on iphone with mac, every entry is multiplied. What are the settings for syncing without repeats?

If your wireless environment is less than ideal, as it is in most inhabited areas, the influence of other wireless networks and devices competing for the same very small portion of the electromagnetic spectrum will affect your network's performance. Your own wireless network is a microcosm of that environment.
To mitigate the effects of competing wireless networks, use 5 GHz to the maximum practicable extent. It is comparatively free from interference contributed by other wireless devices and is likely to remain that way for some time. However, it is less tolerant of intervening obstructions and construction materials than the 2.4 GHz spectrum, so it's not a panacea. Every installation is different so you must experiment to determine the optimum configuration.
Place your wireless router (what kind is it?) in a central location, convenient to all the devices that require it. Most of the time a utility or ISP will locate it in some remote corner next to the utility service entrance. That is almost always the worst possible location.
Others find that only a direct wired Ethernet connection between router and devices will maintain uninterrupted access to Airplay.
That is almost certain to result in the best possible AirPlay performance. Short of having everything hard wired (it's not an option for the iPad for example) use an Ethernet connection for all the devices that lend themselves to that method. Your AppleTV is certainly one of them, since its location is not likely to change very often. Your AirPort Express should be another, since your audio systems are likely to stay put as well. Connect them both to your existing router, either directly or through an inexpensive Ethernet switch. Your problems are likely to be solved with just those two connections.

What's the purpose for the two Wireless Antennas on a WAP?

I have a very simple question, that I'm a little confused about. Here it goes.
Most Access Points have two antennas. One is labeled as LEFT/PRIMARY and the other is RIGHT.
What is the purpose for the two antennas? When I have one antenna connected it works without any issues. Can I just use the LEFT/PRIMARY antenna for wireless connectivity? What are the purpose for the two?
And we are talking about a single band, 802.11b/g NOT 802.11a.
Thank you!

Hi Rashida,
The use of two Antennas on these AP's is used for "Diversity Mode. In many cases, 1 single Antenna will work nicely. Here is an explanation for the use of two Antennas :)
This describes the use of 2 **Identical Antennas in "Diversity" Mode;
The purpose of diversity is to overcome multipath reflections. Diversity antennas that share the same physical housing are placed at an optimum distance apart. The maker of the particular antenna determines that distance based on the characteristics of the antenna. When you use a pair of antennas with matching characteristics to provide diversity for cell coverage in your facility, the guideline is to put those matched antennas at a distance apart from each other that is equal to a multiple of the wavelength of the frequency that is being transmitted. The 2.4 GHz wavelength is approximately 4.92 inches. Therefore, to support diversity on a 2.4 GHz radio with two separate antennas, the antennas should be spaced approximately 5 inches apart. The antenna pair could also be spaced at multiples of 5 inches, but the distance between should not exceed 4 multiples: reflected waves farther apart than that are likely to be so distorted and different in delay spread that the radio could not work with them.Because each antenna is selected by itself, both antennas must have the same radiation characteristics and be positioned to provide similar cell coverage.
**** Two antennas connected to the same access point must not be used to cover two different cells.****
From this good doc;
Multipath and Diversity
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a008019f646.shtml
A diversity antenna system can be compared to a switch that selects one antenna or another, never both at the same time. The radio in receive mode will continually switch between antennas listening for a valid radio packet. After the beginning sync of a valid packet is heard, the radio will evaluate the sync signal of the packet on one antenna, then switch to the other antenna and evaluate. Then the radio will select the best antenna and use only that antenna for the remaining portion of that packet.
On transmit, the radio will select the same antenna it used the last time it communicated to that given radio. If a packet fails, it will switch to the other antenna and retry the packet.
One caution with diversity, it is not designed for using two antennas covering two different coverage cells. The problem in using it this way is that, if antenna no. 1 is communicating to device no. 1 while device no. 2 (which is in the antenna no. 2 cell) tries to communicate, antenna no. 2 is not connected (due to the position of the switch), and the communication fails. Diversity antennas should cover the same area from only a slightly different location."
Diversity Antenna Systems
Diversity antenna systems are used to overcome a phenomenon known as multipath distortion of multipath fading. It uses two **identical antennas, located a small distance apart, to provide coverage to the same physical area.
From this Antenna reference guide;
http://www.cisco.com/en/US/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html
Hope this helps!
Rob

What is the procedure for a hard boot of my iPod touch 4th generation without itunes, and without computer, and without iPod data screen.?

What is the procedure for a hard boot of my iPod touch 4th generation
without iTunes, and without computer, and without iPod data screen?
6 months after purchase I updated my iPod touch as recommend by iTunes.
It has not worked since that day. It frozen (disabled) with a "connect to
iTunes" icon displayed...that is the only thing it does. itunes does not
recognize the iPod. My Windows7 computer recognizes an Apple device.
Other computers recognize the devise but if iTunes resided on that
computer it did not recognize the iPod
I suffered a setback with deep depression and am just now getting out of it enough to do something. The depression prohibited me from taking action.
I have done every procedure recommended from Apple help and external
sources. I did this thoroughly with help for other owners and IT experts,
Apple employees etc etc. I and associates have perform reboots utilizing a
number procedure using only button on the iPod. These were unsuccessful
also have performed.
Please do not ask me to do the usual.
Online I saw a process using the buttons on the iPod to completely
reformat
the iPod. It was NOT the hold buttons for 10 sec let go of one wait 8 sec
etc. I can not find the process now...a friend showed it to me in passing
I have lost contact with him. This is the procedure, I believe, that with
enable me to update and use the iPod.

You need an internet connection and likely a computer with iTunes but an iPhone, iPad or iPod touch with the FindMy iPhone App may work by:
If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone and use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
You can also wipe the iOS device by installing the FindMyiPhone app on another iOS device and using that app to wipe the device.
Otherwise
Disabled
Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Forgot passcode or device disabled
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: Back up and restore your iOS device with iCloud or iTunes
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload most iTunes purchases by:
Downloading past purchases from the App Store, iBookstore, and iTunes Store
If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
Yo may have to go to an Apple store or a friend's house with an internet connection and iTunes.

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration?

Can I migrate from WCS 7.0 to PI 1.2. If so, what are the guidelines for migration? Do we have any Instructions/steps?

Migration from WCS 7.0 to PI 1.2 can be performed. If the customer wants to migrate data you need to first upgrade to NCS 1.1.1 You can download NCS 1.1.1 from Cisco.com if you have a valid service contract.
For the migration step involving NCS an evaluation license is sufficient. You can obtain an NCS evaluation license from http://www.cisco.com/go/license > Get Demo > Network Mgmt Products > Cisco Prime NCS Evaluation License.
Instructions for migrating data from WCS 7.0 to NCS 1.1.1 are available in NCS 1.1.1 Release Notes. Do not upgrade to NCS 1.1.2 as this release is not upgradeable to Prime Infrastructure 1.2. If you are ordering a Cisco Prime physical appliance (PRIME-NCS-APL-K9) be sure to select the NCS 1.1 image which you can later upgrade to Prime Infrastructure 1.2 after you have migrated your WCS data.
There is a post in the support forum which can be refered.
https://supportforums.cisco.com/docs/DOC-26972

Hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

hi, my name is Laith I'm from Iraq I just want to know what are the steps for buying a new iphone 5 from apple store and how to ship it to Iraq ???? and I would be grateful for you

Legality aside (I'm not a lawyer and have no opinion on the matter) in order to make a purchase of an iPhone 5 you would need to travel to a country where they are for sale and purchase it there. Be sure to get one that is officially unlocked or you would not be able to use it with your cell carrier. Be sure that your carrier supports use of the iPhone before you buy. Also note that the warranty of the iPhone is only valid in the country of purchase.
Appe does not ship outside of the countries where it sells the phones.

ITunes store took 51 INR after giving my account info, what is the money for?

Recently i updated my account info in iTunes store, It just took 51 INR right away, what is the money for?
In the transaction description I got /APPLE ITUNES STOR/LUXEMBOURG/
Help me out.

If you updated your credit card details then you probably had a temporarry holding charge applied to the card which is to check that the card is valid and active - it should disappear within a few days
There is more info here : http://support.apple.com/kb/HT3702

What is the url for executing PL/SQL via 9i http

what is the URL for 9i http server pl/sql routines that I just compiled? I don't run 9ias just the 9i http server
http://machine:port/?????????/procedure_name
thnx
endre

do this if you are still having problemd
CREATE AND SETUP NEW USER
The second step is to create an application user that will
own the code for this example. Connect to SQL*PLUS as a user with
DBA rights, and execute the following commands:connect
SQL> CREATE USER user IDENTIFIED by user;
SQL> GRANT CONNECT, RESOURCE TO user;
CONFIGURE DAD IN THE PL/SQL GATEWAY
The third step is to create a new DAD.
Enter the PL/SQL gateway configuration menu. The generic address to the
page is
http://<machin:port/pls/admin_/gateway.htm
The is specified in your plsql.conf file. By default the address
will be
http://..:/pls/admin_/gateway.htm
(Replace ..: with the valid entry for your
configuration, e.g. www.acme.com:8080).
Click on the link 'Gateway Database Access Descriptor Settings' to access
your DAD settings. Then press the link 'Add for WebDB 2.x configuration'
to create a new DAD. Enter the following values:
Parameter Value
Database Access Descriptor Name give name
Schema Name the user you created
Oracle User Name the user you created
Oracle Password the password of the user
Oracle Connect String <- found in your
tnsnames.ora
Document Table documents
Document Access Procedure user.package.procedure
Extensions to be uploaded as LONG RAW
Leave the other parameters as they are. If you are not using an 8i database
or need to use the LONG RAW datatype for
some reason, you can place an '*' in the "Extensions to be uploaded as LONG
RAW" field. You can also limit this to
specific file name extensions such as jpg or pdf by entering the extensions
and using a comma to separate the
values. Click the OK button to save the DAD configuration.
Hope this helps

What is the Tcodes for Uploading of data using BDC & CATT

PP members:
I was going through the cutover activities , and what I understood is we transfer all the legacy system data into SAP before going live
The data upload follows certain steps (depends on the organizational design load strategies)
First we upload all the master data ( material master, BOM, W/C's & Routings)
Then the transaction data ( Ideally speaking, there should no open orders i.e. WIP as on the day of cutoff )
If the WIP (Work in Process) is unavoidable then the materials consumed shall be treated as materials of the previous stage and necessary adjustments shall be made after cutover day
At this point, I could not able to understand what does the author mean materials of the previous stage
Now comming to the uploading of data into SAP from legacy system, we use tools like LSMW, CATT & BDC
Is it a must to use only LSMW tool to upload master data or any other upload tools are fine
Lastly,. I am not sure about the Tcode of CATT & BDC
Summary of the questions:
1.What does the author mean material of previous stage, for WIP materials during cutover activities
2. Is it mandatory to use only LSMW tool for uploading for master data
3. What are the Tcodes for upload tools CATT & BDC ?
Thanks for your time
Suren R

Dear,
1.What does the author mean material of previous stage, for WIP materials during cutover activities - as i understood, what is the stage of material..like it must have gone through 2 work centers and other 2 is left. i.e. you need to create Production order with only 2 operation as other 2 is already over. - usually it is done in such a way that we will create Production order and confirm till 2 operations and WIp is calculated so thatb FI will tally the books in SAP and lagacy.
2. Is it mandatory to use only LSMW tool for uploading for master data - no you can use any tool as required and suits yr requirement
3. What are the Tcodes for upload tools CATT & BDC- BDC through a prog in SE38. CATT through - SCEM.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?

Hi Guys,
What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10?
I have to write an AP Invoice Aging Report in Discoverer to show all unpaid invoices that have been transferred into GL... Business wants it to match one-to-one with the AP Trial Balance standard report...
Business wants to run the report for any date in a past...
The report has two parameters:
As Of Date - the same as As of Date for the AP Trial Report
Trial Balance Run Date - the date when Trial Balance was run...
Conditions are:
TRUNC(Invoice Date) <=TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(NVL(Payment Date,'01-JAN-5000')) > TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
TRUNC(Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Distr Accounting Date <= TRUNC(NVL(TO_DATE(:As Of Date),SYSDATE))
NVL(Distr Creation Date,Invoice Creation Date) <= TRUNC(NVL(TO_DATE(:Trial Balance Run Date),SYSDATE))
Show_Flag = 'YES', where:
Show_Flag = CASE WHEN ( NVL(Cancelled Date,'01-JAN-1901') > NVL(:As Of Date,SYSDATE) AND NVL(Inv Amount Aud,0) = 0 ) THEN 'YES' ELSE ( CASE WHEN NVL(Inv Amount Aud,0) = 0 THEN 'NO' ELSE 'YES' END ) END
There is a difference between the logic of my report, and the logic of AP Trial Balance...
Could you please advise what I'm missing?
Thanks,
Iana

What is the query for Accounts Payable Trial Balance (APXTRBAL) in 11.5.10? You can get the code by opening the report in Reports Builder and get the query.
Or, enable trace/debug as per (FAQ: Common Tracing Techniques within the Oracle Applications 11i/R12 [ID 296559.1]).
Thanks,
Hussein

What is the number for Verizon Wireless Corporate Customer Service Complaint for CA

My Complaint: I have been a Verizon Wireless customer for approx 20 years. I called customer service to seek an early upgrade for my daughter's phone. She is away in college and her phone is malfunctioning. She is eligible for an upgrade in approx 6 weeks so I did not want to spend the money on a replacement phone when since we were planning on updating to something newer. The customer service rep to me they could not do the early upgrade an to call back in a few weeks. After explaining this was unacceptable (I do not like the idea of a young female being out of state and away from home with no reliable means of communication), she places me on hold to later return with the only offer of I must purchase a new device through her ( over the phone) which will be shipped to me, the phone was priced $100.00 more than the online price (they will not price match), plus i must pay $30.00 upgrade fee, $35.00 activation fee and taxes on the retail price of the phone. I am upset and disappointed with the quality of service provided by Verizon being a 20 year customer. If not for the seriousness and urgency of this matter, i would not have asked for an early upgrade. It is times such as these that you get to see how much of a "valued customer" you really are. I guess you are valued as long as you pay your bill and continually purchase their products. I would like to speak with someone from Verizon's corporate or customer relations department. As of now I am really considering changing my service to a different provider. I have multiple accounts with Verizon and i will canx each after the current contract committment expire (starting with my daughter's phone which expires in 6 weeks) In the meantime I will go purchase her a new phone with someone else and take comfort knowing she will have reliable communication.

I started with them in 1985. It has been wonderful service but very expensive. They seem to operate on day of deposit day of withdrawal. That means that I have no benefits nothing beyond the normal customer if I don't pay my bill they shut me off. That's why I have switch to another provider and I have better service lower cost and better phones. you can't beat other providers I mean it. Please don't expect more from verizon other than a "pay me more money and I'll do what you want" because it's all about money. Read the transcripts from current Verizon employees all over the internet. The company is going down and they're taking customers with them.
msvat <[email protected]> wrote:
msvat created the discussion
"What is the number for Verizon Wireless Corporate Customer Service Complaint for CA"
To view the discussion, visit: https://community.verizonwireless.com/message/1113982#1113982
>

In Address Book, Lion, what are the checkmarks for when you Edit a Contact?

In Address Book for Lion, when you are in the Add/Edit a Contact window, what are the checkboxes for?

I am not seeing any checkboxes when I edit in Address Book in Lion, can you take a screen shot (Shift Command 4) of what you're seeing and post it?
BTW please fill out your profile (under Your Stuff above) so we know what machine and version of Lion you're using.

What is the aproach for validation in Sync Mode Batch ?

Similar Messages

Maybe you are looking for