What is the best format to save in computer playback to match the quality of my camera ( MP4 1080p) - NTSC provides poor quality, MPEG2 files are too large?

I am editing video and would like to share these at the same quality and size as the original file - MP4 1080 film clips. I am downloading these files to Google, or to another network. Choices under computer viewing result in the following - NTSC provides poor quality and the MP2 1080 more than doubles the file size. Any better choices?

andreasa
What version of Premiere Elements and on what computer operating system is it running?
What is your camera? Can we assume your videos from the camera are AVCHD.mp4 (1920 x 1080 @ 29.97 progressive frames per second?) What is the bitrate and duration of the file?
What is your file size requirement for the export?
H.264.mp4 is a frequently used format used for uploads to various web sites. You can find that format in Premiere Elements in the Share or Publish+Share/Computer/AVCHD (most often used) or Share or Publish+Share/Mobile Phones and Players.
Please explain what you mean when you mention NTSC versus MPEG2...I understand MPEG2.mpg or MPEG2.m2t, but what do you mean by NTSC.as an export format.
I will fine tune (customize the reply) with some more details as indicated.
Looking forward to your follow up.
Thank you.
ATR

Similar Messages

What is the Best Format to Save Photo Files?

When I open and edit photos from my digital camera in Photoshop, is it best to always save it as a .PSD as I go? I read that a JPEG will lose quality each time I re-save...is this also true of a .PSD?
Also, I'm trying to use some photos on a web-page's slideshow, and that web site recommends using "Saving For Web" at 72dpi in Photoshop so it can be viewed at it's best quality. I tried "Saving for Web" but did not see where to choose the 72dpi setting. How do I do this?
By the way, I'm using Photoshop Elements 6.0

Save For Web always exports with a 72 ppi resolution. All you need to worry about is the image size, quality, and format. BTW, you should save with a different name as you don't want to overwrite your files with a 72 ppi resolution which looks good on monitor but is NOT good for printing.
There's a video about using Save For Web here:
http://www.photoshopsupport.com/elements/tt/save-for-web.html
Tutorial for it here:
http://graphicssoft.about.com/od/pselements/ig/documents.--70/More-Save-for-Web-Controls.h tm
Adobe Help page here:
http://help.adobe.com/en_US/PhotoshopElements/6.0/help.html?content=WSCC0C7B37-3AD2-43ca-9 BF0-677BFC551D97.html
Personally, I always work on a copy of my original as I want to keep the original in case I decide to redo it at some point...maybe my retouching skills improve, I simply change my mind, or maybe there's a technology improvement down the line like better noise reduction or maybe some sort of anti-blur fix (Okay, I'm a dreamer...)
PSD files are non lossy...meaning you do not lose quality when they are resaved. JPGs are a lossy format meaning you do lose quality. Personally, I keep my originals and keep my wk in progress in PSD. I only save to JPG when completely done if needed.

What's the best way to save clips for general viewing on the web?

I am new to iMovie, but not to Macs or file formats.
I have taken some video of kittens at a local cat shelter, hoping to post the clips at the shelter's website in efforts to get the kittens adopted.
I managed to work through iMovie myself, saving the clips so that the person responsible for the website can post them. I first saved them as .mov files - the web person can view them, but others cannot. (They are all using IBM-compatibles) She is trying to get them to launch from an html page. So I tried saving them as .wmv files, but the little fade-outs I placed at the ends of the clips were truncated... the fade-ins were there, but not the fade-outs.
The video started out very good quality, and I would like to retain as much of that quality as possible, while of course keeping them small and manageable. But first of all, I need the web person to be able to post them, and then need everyone to be able to view them.
Am I asking too much, given there are so many ibms out there?

you ask for a solution of a very common problem: the universal video format...
due to sheer market power, .avi and .wmv are the most used standards.
avi is just a container, little supported on Mac; you can choose it as an export option in iM, but it offers just a few compressors (dv/bmp = nice looking, but large, cinepak=small but ugly...)
for export to .wmv, you need, as mish mentioned, to buy a plug-in from flip4mac, we do read enthusiastic responses on that product... but, Mac-users need additional software to read these files (the free plug-in from flip4mac or the free wmv player for Mac from Microsoft)
RealPlayer needs costly encoders, and again special players...
a nice option is .flv, flash-video... needs investment into FlashMX, $$$$ or shareware as VisualHub...
finally, which works for me and my few PC friends, is usage of mp4... without .mov container; choose "mpeg4" in the expert options... your friend has to open that file once in Windows MediaPlayer manually once and save it again, to get rid of some meta-data "Quicktime needed" (which isn't true)... some PCs open these mp4 by double-click, some PCs demand for QT4Windows.. but, as said, manually (open dialog from within WMP) these mp4s are compatible..
better pic results are earned with that little free app iSquint, I LOVE to recommend, it has an excellent algorithm...
sorry, lots of tech blabla... difficult issue...
helpful?

What is the best format for PDF's to render quickly on the iPad

I have constructed an enterprise application that display's numerous CAD PDF plans. It has been noticed that some take longer to render than others. Does anyone have any suggestions on the ideal specification that PDF's should be created?

Unless you need color, print them to pdf as B&W. Also, turn off Layers so everything is in one flat pdf.

What is the best format and resolution to save my logo images for Adobe Premiere 3.0 videos.

Hello,
I've had great success using this forum in the past and was wondering if someone could help me out. I save my logo images for my video as transparent PNG at 72 DPI (because i read an article that stated that 72 dpi was good) in Illustrator for my Premiere-edited videos, but they seem pixelated. See example at
Can anyone tell me the best way to save it so that it is more crisp.

XonoBoom,
With PrPro, you CAN Import Layered PSD's. You will be given two choices, when you do: Import as Footage, with the Layers Flattened (the term for merging all Layers into one), or as a Sequence. Now, the latter has slightly different results, so you will want to explore this a bit more closely, and the Help File will be, well "helpful." The Layered PSD will come in as a Sequence, and in a Bin. The Bin will need to be twirled open, and from there, one can do all sorts of operations, such as Nest that Sequence into another, but for what I do (and what you might wish to do), you can just click+drag each Layer (they appear separately in the Project Panel), to Video Tracks, where they can be used in their order of creation, or can be moved about, as is required. One can add Effects, or adjust the Fixed Effects, such as Opacity, to each Layer individually. I do this for a lot of Titles, and just create those Images with Layers in PS. A little planning is required, in that creation, but once you get the hang of it, it will become second-nature.
A variation from PS is the Layer Comp, which is useful for intricate animation. That "variation" is on the PS end of the process/workflow.
Good luck, and if you do much work with graphics into your Video, I think that you will save a lot of time, plus have so many creative doors opened to you. Just spend a little time looking over the Import PSD as a Sequence, so you will understand what you are getting, what you are seeing and how to handle it. Many are not initially expecting a real Sequence, and worry about what to do with that.
Hunt

What's the best way to save a .pdf with comments?

I really like the comment features in Acrobat X, but I'm a little stuck on what "Save As" function is the best for .pdfs. For example, I also use the GoodReader App quite a bit on my phone, and I've noticed that they have an option to "flatten" the markups on a file. When exporting the markings will open up just fine in any .pdf reader. I really like that system, but most of the time I need to use my laptop for the keyboard.
With Acrobat X some markups are consistent (mainly the drawing ones), but the annotation ones are not as easy to figure out.
So, what do you guys recommend for which format is best for saving. Essentially, I plan to grade student essays with markup and then e-mail the files back (or, if it is not too time consuming, upload them in GoogleDocs and then share the link). Either way, I'm looking for the best overall way to do it. Any help is greatly appreciated.

I use stamps and text boxes most often. Occasionally I use the text-editing tools in the comments area, but they really don't save well when I flatten the file. Occasionally, I'll add a file to pdf when I need to extensively comment on a certain area of the pdf. Depending upon the comment I'll either use a text file (my preferred choice), an rtf, or pdf.

What's the best way to save an 8.5 x 11 image for use as a page background in a PDF?

What's the best way to save an 8.5 x 11 image for use as a page background in a PDF? My goal is to have a relatively small final .pdf file size that includes numerous pages with full 8.5 x 11 images as backgrounds in the document. If I save at 8.5 x 11 and 72dpi (example), the image is not 8.5 x 11, and the quality is not good enough. I need help with size, dpi, and file format to save as before I place it in InDesign and then save as a .pdf.
Thanks,
Jim

Do exactly what I said then. Create the InDesign document of the required dimension, and chose whether it will be high quality print, or Interactive PDF. It really doesn't mater what format you bring the image into that document. It can be JPG, PNG, but I usually use native Photoshop PSD. The image does have to be of high enough resolution, but it can be many times bigger than iis required for the final export. (InDesign does not import the image, but rather references it on your hard drive.)
When you have placed your text and finished your page, then export it to PDF, but go through the tabs chosing suitable settings. If the image needs to be downsized, InDesign will do that at this stage while building the PDF.
If you can tell us how this presentation will be made (Projector, overhead projector, printed page etc. or just emailed to the end users) we can help you more with the final output settings.

What is the best format for a image with transparency?

If I create an image in PhotoShop with Transparency, what is the best format and size to save it in for it to work in FCE?

Did that link help you?
Thanks Tom.
The link helped.
FCE kept crashing when I put the image on the time line and I figured out that it probably had to do with the size of the image that I was using. It was 4656x3400 and CMYK.
Once I reduced it and changed to RGB it worked.
Love your new book!

What is the best format for a master?

Hi,
I am about to send my master for replication. Can anybody tell me what is the best format I should save my songs into? I want to avoid any complains that my CD is not "compatible" with someone's CD player.
Also, any pointers on how to burn my master CD (slowest speed, etc.) to get the best sound quality I can get from Logic Pro?
As always, thank you sooo much. :>
Anya

Hi,
Your master should be dithered (assuming you started off in 24bit) to 16bit and 44.1 - which is cd quality. Whether it is in aiff. or wav before you burn to CD is not an issue.
As for the CD itself - use Waveburner to burn the master disk as this burns it to red book compliant quality. In regards to the speed - i tend to burn cd's at 4x as a sound guy friend a fw years ago informed me this would reduce the possibility of errors on a burned cd. If you want to be sure burn it slower even!
The most important thing is to bounce your tracks down to 44.1 and use Logic's dithering options when making the tracks 16bit too.
Hope that helps,
Rounik

I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show a

I have lightroom 5.7. Now I have apple TV to connect my Mac to the TV scree. I wish to do a slide show on the TV. However, on the Mac, using ITunes to share photos with the TV, I cannot locate all photo files. What is the best way to save the slide show and put it where the Mac sharing can find it? So far, I made on one folder in Lightroom, put some photos there and I found them easily. Can this be done with a slide show? Please help quickly! Also worried that the photos I put on the new folder are hard to find afterwards, when the show is done. Where do they go when I delete from from the new folder?I am not alone

Not that I'm aware of. You just export JPEG copies to a folder that you can point iTunes to. For instance, I have created a folder in my Pictures folder called Apple TV. And within that folder I have other folders of pictures that I can choose from in iTunes to share with Apple TV. But there doesn't seem to be any way to share a Lightroom slideshow. If you have laid to create a video file that would probably work. Apple TV is a little clunky in my opinion. Some things are a little more difficult to do now than they were a while back. I probably haven't provided you with much help, but just keep experimenting and I think you will figure it out.

What is the best format to use on an external hard drive so I can both back up my Macbook Pro and also put movies on it from another hard drive (PC)?

I am looking for a solution to whether if it is best to get two hard drives or one that can do two things that I want.
I am looking for a hard drive format that can both back up my 500GB Macbook Pro but I was also wondering if I could also put movies on it from another hard drive that is PC based. Would partitioning the hard drive work for this? I don't know what are the best formats to use.
If this is too hard it might just be easier having a separate 500GB hard drive for back up of my Mac and another bigger hard drive for the movies etc (the files are probably bigger than 4GB). Any help would be greatly appreciated as I need to make a decision soon!

Csound1 wrote:
Microsoft has not released the official exFAT file system specification, and a restrictive license from Microsoft is required in order to make and distribute exFAT implementations. Microsoft also asserts patents on exFAT which make it impossible to re-implement its functionality in a compatible way without violating a large percentage of them.[13] This renders the implementation, distribution, and use of exFAT as a part of free or open-source operating systems or of commercial software, for which the vendors could not obtain a license from Microsoft, not only technically difficult, but legally impossible in countries that recognize United States software patents.
Can't help with that, if one is using a Windows machine then they are subjected to their rules and control.
Limited support outside Windows and Mac OS X operating systems as of 2012, when most consumer electronic devices could only handleFAT12/FAT16/FAT32, rendering exFAT (and flash memory formats using it) impractical as a universal exchange format.
The OP said they plan to store movies on the external drive.
Many movies today are well over 4GB in size, thus exFAT has to be used and formatted on the PC, which the Mac can then read.
Older Windows NT versions up to Windows Vista without Service Pack 1 do not support exFAT.
Irrelevant, Microsoft provides a free download of exFAT for Windows XP, and Vista shouldn't be running on pre SP1 anyway.
Some distributions of Linux have begun to include support for exFAT. It is however, only available as a file system in user space, as it's not supported by the kernel.
Irrelevant, OP is using Windows and OS X, not Linux and if they did Linux can read the files at least and transfer, which is all they care about really.
Windows Vista is unable to use exFAT drives for ReadyBoost. Windows 7 removes this limitation, enabling ReadyBoost caches larger than 4 GiB.[14]
Irrelevant, the OP's is intending to use it as transfer drive between Mac's and Windows for movies.
The standard exFAT implementation only uses a single file allocation table and free space map. FAT file systems instead used alternating tables, as this allowed recovery of the file system if the media was ejected during a write (which occurs frequently in practice with removable media). The optional TexFAT component adds support for additional backup tables and maps, but may not be supported.
Some relevancy, but only exFAT can handle 4GB+ files between Mac's and PC's, so the need outweighs the possible problem.
The OP needs to follow the standard Windows practice of "safely removing hardware" before physically disconnecting the external drive. If a write is occurring, it won't allow disconnecting until the write is finished.
Support for up to 2,796,202 files per subdirectory only.[1][nb 3] Microsoft documents a limit of 65,534 files per sub-directory for their FAT32 implementation, but other operating systems have no special limit for the number of files in a FAT32 directory. FAT32 implementations in other operating systems allow an unlimited number of files up to the number of available clusters (that is, up to 268,304,373 files on volumes without long filenames).[nb 4]
Not a issue, only in extreme cases of a lot of small files. The OP plans to use it for movies which are usually large and take up a lot of space on the drive.
IMMO It looks like you just ran off and copied something to argue your point when all the points are basically irrelevant.
There is only one format that can easily share 4GB sized files between Mac's and PC's without further complications.
It's ALSO possible to install MacDrive on the PC and format the drive on the Mac HFS+, but I didn't recommend that because I know it's a hassle just like third party NTFS writing software is a hassle on Mac's.
If you so anti-Microsoft format, then you must know Paragon has to pay a license fee to Microsoft for using the NTFS format.
At least with exFAT there is no fee to Redmond, at least not yet.

What is the best way to save an ai file so it can be opened in corel draw

I have an ai file that needs to be opened in corel draw by a client. It needs to remain editable all paths and colors ect.
Whats the best way to save it so it can be.
yes I know corel is not as good as Illustrator but its what they have.

Moving files back and forth between Adobe Illustrator and CorelDRAW is tricky. There's quite a bit more to it than knowing what version of CorelDRAW the client is using. If the artwork is fairly simple then there shouldn't be any problem with transferring the artwork into CorelDRAW. If the artwork has gradients, transparency effects, a lot of clipping masks, etc. then it's going to be a lot more dicey getting it to import into CorelDRAW properly. In addition to the .AI file you provide, you should give the client a PDF they can view in Adobe Reader or Acrobat so they can proof how the artwork is really supposed to look.
I use Adobe Illustrator CC and CorelDRAW X6 in my work. I've used both applications for over 20 years. I don't consider either application better than the other. They both have their own unique strengths and weaknesses. I'll do a good bit of creative work within CorelDRAW to use certain features Illustrator either lacks or just doesn't do as well. Or I may need to design a really big project at full scale and Corel has a much bigger art board than Illustrator. Most of the time I move a lot of the stuff I created in CorelDRAW over to Illustrator for further refinement or moving it into Photoshop as paths or smart objects or just getting it ready to print (I don't like Corel's color engine even though it has improved in recent years).
Like others have said, you need to know the basics of what the user has -mainly which version of CorelDRAW. The newer versions like the one I'm using can open Illustrator CS5 files. For older versions, you may have to save down to CS2 or even really old versions like Illustrator 8.
CorelDRAW will not support certain Illustrator-dependent effects. For instance, if you apply a gradient to an object outline it will be lost when opened in CorelDRAW. A lot of other effects won't be maintained when opened in Corel unless they are flattened/expanded. Some effects may even have to be rasterized, and that can create other issues. Out of effects that are maintained, some may have to be adjusted. CorelDRAW and Adobe Illustrator handle things like gradient fills differently and don't understand how to portray gradients from their rival application accurately. Some nice fill that was created in CorelDRAW may have to be tweaked or completely rebuilt when opened in Illustrator.
I get a lot of customer files in CorelDRAW and also a lot in Illustrator. That reason alone makes it necessary for me to have both CorelDRAW and Adobe Illustrator running on my computer.

What's the best format to import in to iMovie?

Okay, here is the situation, I have a lengthy Keynote presentation which I plan to export via QuickTime so it can be imported in to iMovie in order to do voice-overs. The question I have is what the best format is to use to export from Keynote in order to import in to iMovie. I am obviously looking for the format which is the smoothest, doesn't lose any quality, and will look clear once imported in to iMovie. Also, there is no reason to use H.264 since size during the transfer doesn't really matter to me, besides, H.264 seems to be somewhat jerky with Keynote exports (or maybe it's just my computer) as I am using some of the graphics intensive transitions and effects.
Also, I know that when you send movies directly from Keynote to iDVD or from iMovie to iDVD, it uses a format which is directly compatible and there is no conversion that takes place, is there a format which will work this way from Keynote to iMovie or does it always have to do the conversion.
Finally, the other thing you should know is that I created the presentation in Keynote using 1280x720 in order to achieve the true widescreen aspect ratio. Now, I am NOT looking to keep this in HD, once I import it in to iMovie, I only need the standard DV Widescreen resolution since I will eventually transfer it to iDVD to burn it as a widescreen DVD. So, I would also appreciate some sort of input as to whether I should export the QuickTime file out of Keynote as the full 1280x720 and then let iMovie do the down-sampling, or should I export it directly out of Keynote using the standard definition widescreen resolution? Please, I would appreciate ANY help on this!!!

Thanks for your suggestion Bruce, however I found another way as well. I finally found that using the full resolution (1280x720) with Apple Intermediate Codec @ 60FPS turns the best results (for a relatively low disk usage). I finally went with the 60 frames per second because I was having problems getting a somewhat jerky output using Current or 30FPS in any format. I realize that iDVD reduces the FPS eventually, but it seems to be perfect when I take that route. Although the jerkiness isn't noticeable on most effects and transitions, if you use the newer transitions like Reflection or Doorway, you will definitely notice a less than perfect playback.
I know that I said that file size didn't matter, but I decided using uncompressed video was just too large, I think the file size was like 25-50GB or something like that. I took forever to import in to iMovie, so I quit with that route.
I really appreciate the Garageband suggestion, that was by far the best way to go. I never really tried using the new GarageBand in iLife '06 so I didn't even realize that it had movie scoring—what a GREAT feature! I definitely should have recorded directly in to GarageBand rather than in iMovie, something is just not right with iMovie's audio handling. Anyway, thanks for the help!

What is the best format

what is the best format for z2, insted of factory rest
format like you format your computer
Solved!
Go to Solution.

@AymanLinux
Those are your options
1. PCC or Bridge as suggested by @Phy
or
2. using MyXperia/Android device manager to delete everything on your phone.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Whats the best way to save large folders/files on multiple dvds?

hi,
A quick question about the best way to save to dvd(4.7gb disc) a large number of folders/files.I've got about 30-40gb of stuff to save from mp3 sample files through to logic audio files.I already have them saved to another HD but i just want to be extra safe and have another back up.In the past i've just saved it disc by disc creating each folder as i go dragging the appropriate folder across.I was just wondering whether there was an easier way than this.May be an application where i can drag all the files and it will sort and save everything for me much like the way itunes now saves/backups files.
thanks
darren

Hi darrenz,
if you have Toast you can save your stuff using Toast. There's a great option within Toast. You need to select the Data tab and choose "Mac only". Then just drag all the stuff you want to burn to the Toast window and it will automatically ask for another DVD until everything is burnt. After that all your DVDs will have a Toast Restore app on them. It lets you select what you want to restore and will tell you which DVDs to insert. Here's a screenshot I found by googling: http://www.macworld.com/images/content/2005/08/19/toast7restore.jpg
Have fun!
Björn

What is the best format to save in computer playback to match the quality of my camera ( MP4 1080p) - NTSC provides poor quality, MPEG2 files are too large?

Similar Messages

Maybe you are looking for